IMG or SPRO Settings for BI in CRM

Hi All,
We are doing a new implementation of BI primarily for CRM but the data also comes from ECC for actuals.
Can someone tell me what are the required / important BI settings that need to be done in IMG for new development.
1. IMG Settings for BI Reporting in CRM
2. IMG Settings for BI Reportign in ECC
3. IMG Settings in BI System
Any input is greatly appreciated.
Thanks

Pathak,
Thanks for your response. The document is not helpful for what I am looking for.
I want to under what settings need to be made from BI side in CRM/ECC/BI SPRO settings.
This must be standard for all new implementations. I appreciate if someone can share.
Thanks
Raghu
Edited by: Ravi on Sep 6, 2010 6:22 PM

Similar Messages

SPRO settings for the Creation of treatment codes.

Hi Experts,
Let us know SPRO settings for the creation of the new treatment codes and suggest us where it can be checked once created eg. Sales order,Delivery,Invoice.
Regards,
harmesh

Hi
What is Treatment Code??
If you mean Sales Order / Delivery / Billing Document Type then you may follow the below path in SPRO :-
Order :- IMG> Sales and Distribution>Sales > sales Document>Sales Document header(VOV8)
Delivery :- IMG--> Logistics Execution > Shipping>Deliveries --> Define delivery Type (0VLK)
Billing :- IMG --> Sales & Dist. > Billing> Billing Document--> Define Billing type (VOFA)
Regards
Amitesh Anand

Spro Settings for CAD Desktop

Hi Experts,
Can you please guide me what spro settings needs to be done for implementing CAD Desktop. I have gone through the SAP Library notes but still confused regarding the IMPLICATIONS of the fields under CAD Systems in spro like Group Maintenance, Applications, Parameters etc.. What are their implications and what settings need to be done?
If any of you have got SAP notes on the Implementation and Spro settings for CAD documents, Please forward me.
Thanks a lot in advance....

Hi,
for CAD Integration you also need the plug-ins for the CAD Systems. In the installation-guides for the plug-ins you also find the required settings for the CDESK customizing. In addition a lot of information - especially about the parameters - can be found in the notes (service.sap.com/notes).
More info on the plug-ins: http://wiki.sdn.sap.com/wiki/display/PLM/CADIntegrationin+PLM
Best regards,
Martin

Settings for SCE in CRM 5.0

Hi
I am using CRM 5.0 in our environment. We have made the settings for VMC, and it is now running fine. After this what settings do I need to make for SCE. As per documentation available, RFC connections are not required for SPE, SCE or TTE.
But when I look at SPRO in middleware parameters, we have to define some parameters for the SCE. Please tell me what all are the settings required for the same.
Cheers
Hits

Hi Hitesh
Look at the IPC config guide. You need to make settings in TBE31, CRMCONSUM, CRMRFCPAR.

Bi general settings and img or spro settings

Hi experts,
I am working in bi for preparing bex reports in previous projects.
Now, I am woking in new implementation project. I have blank server.
What are the steps to start the new server settings in bi 7.0?
I know the connection settings for sap r3 data sources and global settings, loading process.
I want to know about other settings like in spro what are the setting to be done for implementation and general settings.
my source system is r3 only.
Regards,
Dharani

Pathak,
Thanks for your response. The document is not helpful for what I am looking for.
I want to under what settings need to be made from BI side in CRM/ECC/BI SPRO settings.
This must be standard for all new implementations. I appreciate if someone can share.
Thanks
Raghu
Edited by: Ravi on Sep 6, 2010 6:22 PM

SPRO settings for Framework page

hi,
I have made few changes in SPRO settings as below.
In a framework subarea i have added two services A and B.
in dev portal both the services A and B are visible one below the other.
where as when it is transported to QA server.
Only one service is visible.
for some users A is visible and the other "B" is not visible, where as for other user B is visible and A is not ?
the proxy classes used are standard...
Regards,
SV.

hi,
we dont have user id in QA by which i can debug the FM externally.
but if i debug the given FM (HRXSS_SER_GETAREAMENUDATA) from R/3 it shows me both the links A and B for the particular pernr.
please guide me futher.
Regards,
SV
Edited by: SAP Portal Deve on Aug 7, 2009 2:31 PM

SPRO settings for warehouse

Hi ,,
Can anyone please help to set this Warehouse and subcategories scenario with SPRO..
Warehouse Number
       - Storage Type( like bulk .. )
               - Storage Section/ Picking Area
                      - Storage Bin
                             - Quant .
I am able to define only warehouse number . How to set the rest .
Please Help ..
Regards,

12.1     Creating Warehouse
Transaction code     SPRO
IMG menu     Enterprise Structure  Definition  Logistics Execution  Define, copy, delete, check warehouse number
12.2     Defining Control Parameters for Warehouse Number
SAP menu     Logistics Execution  Warehouse Management  Master Date  Define Control Parameters for Warehouse Number
Transaction code     SPRO
12.3     Spool Parameters for Transfer Order Printing
SAP menu     Logistics Execution  Warehouse Management  Activities  Define Print Control
Transaction code     SPRO
12.4     Profile for Sorting during TO Print Procedure
SAP menu     Logistics Execution  Shipping  Picking  Lean WM  Define Print Control
Transaction code     SPRO
12.5     Transfer Order Print Indicators
SAP menu     Logistics Execution Warehouse Management  Activities  Define Print Control
Transaction code     SPRO
12.6     Print Program per Warehouse Number
SAP menu     Logistics Execution  Warehouse Management  Activities  Define Print Control
Transaction code     SPRO
12.7     Defining Number Ranges
SAP menu     Logistics Execution  Warehouse Management  Master Data  Define Number Ranges
Transaction code     SPRO
12.8     Defining Number Ranges for WM
SAP menu     Logistics Execution  Warehouse Management  Master Data  Define Number Ranges
Transaction code     SPRO
12.9     Warehouse Settings
12.9.1     Defining Storage Type
SAP menu     Logistics Execution Warehouse Management  Master Data  Define Storage Type
Transaction code     SPRO
12.9.2     Defining Storage Sections
SAP menu     Logistics Execution  Warehouse Management  Master Data  Define Storage Sections
Transaction code     SPRO
12.9.3     Defining Storage Bin Types
SAP menu     Logistics Execution  Warehouse Management  Master Data  Storage Bins  Define Storage Bin Types
Transaction code     SPRO
12.9.4     Defining Storage Type Indicator
SAP menu     Logistics Execution  Warehouse Management  Master Data  Material  Define Storage Types Indicators
Transaction code     SPRO
12.9.5     Defining Storage Unit Types
SAP menu     Logistics Execution Warehouse Management  Master Data  Material  Define Storage Unit Type
Transaction code     SPRO
12.9.6     Defining Storage Section Indicators
SAP menu     Logistics Execution  Warehouse Management  Master Data  Material  Define Storage Section Indicators
Transaction code     SPRO
12.9.7     Assigning Warehouse number to plant/storage location
SAP menu     Enterprise Structure Assignment  Logistics Execution  Assign Warehouse Number to plant/storage location
Transaction code     SPRO
12.9.8     Defining Requirement Types
SAP menu     Logistics Execution Warehouse Management  Activities  Transfers  Define Requirement Types
Transaction code     SPRO
12.9.9     Activate Storage Unit Management per Warehouse Number
SAP menu     Logistics Execution Warehouse Management  Storage Units  Master Data  Activate Storage Unit Management per Warehouse Number
Transaction code     SPRO
Defining control parameters and number ranges f. warehouse no.
SAP menu     Logistics Execution  Shipping  Picking  Lean WM  Define control parameters and number ranges f. warehouse no.
Transaction code     SPRO
12.11     Defining Difference Indicators
SAP menu     Logistics Execution  Shipping  Picking  Lean WM  Define Difference Indicators
Transaction code     SPRO

SPRO Settings for 0CML_INIT_BUDAT, 0CML_INIT_DDISPO,0CML_INIT_DFAELL, 0CML_DELTA & 0CML_DELTA_CAP

Hi Gurus,
We are trying to use 0CML_INIT_BUDAT, 0CML_INIT_DDISPO, 0CML_INIT_DFAELL, 0CML_DELTA & 0CML_DELTA_CAP for first time.
Have done prerequisite settings in SPRO tode in ECC client.
After when i try to run 0CML_INIT_BUDAT it extracts data only for the date which we have mentioned in 'infosources for position intialisation' in SPRO.
I am not sure where did i go wrong.
Please help me detailed steps for setting SPRO and also why is it not extracting all data from the position date specified rather it extracts only on that date.
Thanks in advance.
points will be assigned.

Hi Nimesh,
I would like to receive the document as well.
My e-mail is [email protected]
Thanks in advance,

SPRO Settings to configure the standard Workflow for PO

Hi Guys,
Please let me know the steps to configure the Standard PO workflow. I want to know the SPRO Settings for the same

Search this forum with keyword Release Procedure and you will get your answer. Ideally fnal people should configure this settings.
Thanks
Arghadip

SPRO (Customization) settings for PM-PP integration

Hi Everyone,
Though I know one or two customizing settings, I need to know all the SPRO settings for PM-PP integration. please be elaborative in your responses.
Thanks in advance.

Hi
Please find standard scenario for SAP PM_PP integration.
The goal is to see maintenance work orders taking available capacity from
production work centers.
Production work center must be entered into the appropriate equipment master record(s).
The work order the 'system condition' must to set to "0" for PM
reservations.
Production work center is set to include "Proj:RqmtsNetwkMaint" (Standard formula SAP008) in both the Scheduling
view and Capacity view in the 'Other formula' field. The capacity requirements in "Extended" capacity evaluation
(transaction codes CM50 - CM55).
Let me know
Regards

EBRS - MT940 format - no transaction types available in SPRO settings

Hello Experts,
I got bank statement in MT940 format. I checked SPRO settings for electronic BRS. I checked in node create transaction type. However, I didn't find transaction type for MT940 format. How to get such transaction types in SAP.
Please refer screenshot and help me on how to get the transaction type for MT940.
Meena

Hello Meena,
Transaction type which are mutually agreed by business and Banker's and which same has to be configure as mentioned in spro.
Financial accounting New > Bank accounting>Business transactons > Payment transactions > Electronic Bank statement > Make global settigns for EBS > where you have seen create trasnction code types as folder. Double click on that and maintain the same
Regards
Mani

Missing IMG steps for Best Practice CRM Service.

Dear SDN'ers,
I am working for a client and we are now implementing CRM Service.
In the Best Practice guide I found IMG step like
3.3.3.4.     Defining Time Allocation Types,
3.3.3.6     Defining Availability Template
3.3.3.8     Defining Service Area
etc.
However I cannot find these corresponding transactions in SPRO. They all refer to the path Customer Relationship Management  Workforce Deployment  WFD Server  Business Settings for WFD Server  only In our system this path doesn't excist. It calls IMG transaction like WFM_001 but the system doesn't recognize this IMG activity.
Please can anybody help me?
Kind regards,
Niels

Hi,
Have you carried out the prerequisite steps?
Also chk this path in SPRO
Customer Relationship Management>Transactions>Settings for Service Processes>Settings for Service Resource Planning>WFM Core-->Make Settings for the WFM Core.
And also ensure that no RFC connection has been assigned to the WFM Core if you are using it as an add-on in SAP CRM.
Regards,
PePe

Settings for non-modvatable and modvatable taxes in img

HI gurus,
What are the settings for non-modvatable and modvatable taxes in img, and where shall we do them
Ur reply is appreciable
Pls send the ans asap
Thanks in adv
sri

Greetings Martin,
The default value for Maximum Time in Queue is 259200 sec OR 3 days. We'd recommend increasing this threshold to 345,600 seconds (four days) or 432,000 (five days) if necessary.
Please remember changing this value will not affect existing queued messages. The drop dead point in time is attached once and resides with the message for it's life.
Regards,
Viquar Ahmed
Customer Support Engineer

Settings for delivery in erp from crm

Hi
Can any one explain what basic settings to be done to carry out delivery in erp when sales order is created in crm

Hi
Please check the following:-
1. The transaction type you create in ECC and CRM should be in sync. I mean it should have the same nomenclature is used in both the systems. Say Z001.
2. The item category type you create in ECC and CRM should be in sync. I mean it should have the same nomenclature is used in both the systems. Say ZTAN.
3. Availability check settings in ITEM CATEGORY which will be defined in SAP CRM. Define ATP Profile > Assign this ATP profile in the ITEM CATEGORY in SAP CRM.
4. Please follow the SPRO settings in the following path in SAP CRM system:-
SPRO > Customer Relationship Management > Basic Funstions > Availability Check Using SAP ECC >
Follow the below steps in the corresponding SAP ECC system:-
1.Start transaction FIBF in SAP ECC, then go to menu Settings -> Identification -> SAP Applications.
2.In table BTE Application Indicator, add the application CRMATP and set it to active.
Note:- You must be aware that the DELIVERY is created once the SALES ORDER is replicated to ECC from CRM. Above settings are required and should be done carefully. Please take help of an middleware expert to do the middleware settings.
Hope this will help.
Regards

IMG Settings for "Define Settings for Attachements" SRM 5.5

Hi!
I hope some can help me too.
I use SRM 5.5 and want configure also attachement transfer from SRM to R3 (700).
I have implemented the
BAPI - BBP_CREATE_BE_RQ_NEW
with the method
FILL_REQ_INTERFACE
and the statement
CV_ATTACH_TRANSFER_ACTIVE = 'X'.
I have also done the settings in DC10, DC20, DC30.
But my Problem is that i dont get a attached document in R3 if i look in TA (ME23N).
In SICF i have configure the docserver with ALIAS.
In SMICM i get no error message if i start with NONE entry in field RFC Connections.
Can anybody give me help with the IMG settings in "Define Settings for Attachements"?
i think in this settings i have some to fill out but dont know really what!
please can someone help me with this problem.
Thx
Wolfgang

Hi and thx for answer!
I have now added in the BAPI the 2 statements
BE_STORAGE_CAT = 'DMS_C1_ST'
BE_DOC_TYPE = 'SRM'
and now i get in SAP Portal following error message if i want attach a file:
The instruction at "0x0adca7b9" referenced memory at "0x00000000"
The memory could not be read.
After this i try it again without this2 statements and i get the same error message?!?
So what can i do now?
thx for any help
br Wolfgang
@ In the TA MN23n i look at the item position line for attached files but nothing their.

IMG or SPRO Settings for BI in CRM

Similar Messages

Maybe you are looking for