IMG settings after creating new output type for a purchase order smartform

Hi all,
Do I need to make changes in IMG after creating a new output type in NACE for a purchase order smartform?
I have customized a purchase order smartform according to the requirements and copied an existing output type and assigned the custom form name.
When I am trying to create a purchase order to test it, I am going to the message tab for assigning the output type and if I press F4 on the output type field or if I give the copied output type there, it says output type is not defined.
Do I need to make any changes in SPRO?
Regards,
Anik

Yes. You have to add the new output type to the proper message determination schema.
Go to the IMG and select Materials Management -> Purchasing -> Messages -> Output control -> Message determination schemas -> Define message schema for purchase order -> Maintain Message Determination Schema: Purchase Order.
Select the proper schema, then Control Data and insert your new output type into the schema (eventually with any requirement that may be necessary... you probably want to use 101 like in case of the regular NEU message).
This should do it.

Similar Messages

Problem in creating New output types - Urgent

hi all,
Issue is that we had created a new plant(NSC) and for that plant, we had created new scripts for Indent and Sales Order. Means I have to create new output types for NSC Orders and Indents.
What i did that I went to SPRO- IMG- Basic Functions- Output Control- Output Determination- Output Det using Cond Tech- Output Det for Sales Documents , created new output types ANSC and BNSC for AN00 and BA00 respectively.
Then Output Types assigned to Partner Functions. Then I went to 'Maintain output determination procedure' and copied V06000 (Quotation Output) and V10000 (Order Output) to ZV0000(NSC Quotation Output) and ZV0001(NSC Order Output) respectively.
Then I went to ZV0000(NSC Quotation Output) and ZV0001(NSC Order Output) determination procedures and changed outputtypes to ANSC and BNSC instead of AN00 and BN00.
Now what should i do next?? I went to 'Assign Output determination procedures' but here no new entries can be added and I cant find procedures which I created.
Any ideas please??
Regards,
Aisha Ishrat
ICI Pakistan Ltd.

HI,
follow this steps:
1. In assignment u have to assign ur new output to respective documents
eg: Assign ZV0000(NSC Quotation Output) to QT sale doc type
2. After doing this u have to maintain condition record
goto tcode: VV11-> here enter ur condition type which u have defined-> inside fill in the details--> now click the <b>communication</b> ikon in top--> fill in the details
this is solve ur purpose
regards,
Arun prasad

New output type for Messages in purchase order

I am using new output type for messages. I want to make it appear as default output type when clicked on messages. I have maintained it through NACR transaction. Do I need to maintain message determination schema ?

Hi,
Check following configuration as well.
The following process is to be followed
Output determination of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
Company code
select which ever the criteria you require.
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
The printers are also assigned as local printers in the su01
settings of a particular user as output device.
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
Deepak.

New Output type for purchase return excise invoice..?

Hi all
For purchase return process with exisable material.
Here I m using the transaction
1.J1IS to create purchase return excise invoice and
2.J1IV for posting to accounts & print purchase return excise invoice
.In standard SAP the output for purchase return excise invoice is JEXC.
here my query is started,
ABAPer created the new program for purchase return output with all new layouts,
And from functional side i have defined new output type for the same as YEXC copying from JEXC.
While doing the transaction J1IV, i getting the output type YEXC, i m not able to print preview.
To proceed further i need some body guidence. Like where to assign the output type.
some body can give some inputs .
Thanks
sap-mm

Hi AP thanks for ur immediate response.
But i have done all the configuratuion in NACE only.
There in nace i m not able find out the mistake or missing configuration.
Can u expalin me step by step process end to end .
Thanks
sap-mm

New Output Type for E-MAIL - What Programs to use

Hi ,
I am Configuring a new Output Type for E-mail Invoices. Based on the Billing Indicator on the Customer Master the New output type for E-mail should be determined and send an e-mail. To test this i have setup a new output type and used the below parameters:
Program : RSNASTSO
Form Routine: SAPOFFICE_AUFRUF
PDF/SmartForm Form: SAPOFFICE_AUFRUF_VX
Form Type: PDF
I have the e-mail address in the general data of both Bill to and Sold TO. The partner Function for this output type is BP.
When i created an Invoice i got the below error, I have highlighted the line with astericks which are showing up as error.
Processing log for program RSNASTSO routine SAPOFFICE_AUFRUF
Function module SO_NAME_CONVERT with return code
Text 220V30900018667                    ZRD3E0500000425 ID STAM language E not found
**No address exists     - Error**
**Error while copying recipient object    - Error**
**Specify at least one recipient        - Error**
Message object FOL29000000000004SCR33000000000044 created or sent
At this point i just want to be able to send an invoice via e-mail using standard program. I am looking to confirm if i am using the correct parameters. Any help will be greatly appreciated.
Thanks,
Irfan.

Hi ,
You can ty using the function module SO_NEW_DOCUMENT_ATT_SEND_API1
here you will to also pass the logic that the PDF should be sent to a email recipient as per mentione din the bill to party function module
Thanks
Prashant

Can we create new partner types for quallity notifications in SAP system?

Can we create new partner types for quallity notifications in SAP system?
The business requirement is to limit the available entries for partners displayed when they search in quality notification. I have already created new partner functions & assigned the relevant partner types, however struggling with defining new partner types.
Would appreciate help in resolving this.
Thanks,
Nilesh

I know this customisation setting ...It allows us to create the partner functions & assign it to the partner determination procedure.
Then you can assign the procedure to the notification type.
This customisation setting does not solve the problem I have.
I'm looking for the partner type creation process which we assign to the partner function.
Edited by: NILESH BHAVE on Aug 12, 2010 3:06 PM

Creating a output type for service PO

Dear All,
I want to create a Output type for Service PO, Can any one tell me step by step process.
Regards,
Thanuskodi T.

Hi Antony,
I have maintained the same access sequence i.e. 0001 and also the combination for condition control in MN04 is maintained same i.e. Document type as maintained in NEU and same for ZNEU.
Still I am not getting automatically, though while putting manually in Message in PO, it's picking perfectly and doing fine for rest of the cycle.
Pl help.
Regards,
Jyoti Bhusha Sharma

Want to change output type for 10000 sales orders through MASS

Hi Friends,
I would like to change the Output type in the sales order for 10000 sales orders.
Can I do with MASS transaction. If so, Plz let me know how ?
Is there any other process to change the output type for 10000 sales orders, as its difficult to manually in each and every sales order.
Its very urgent issue, Plz let me know at the earliest.
Thanks & Regards,
Praveen Kumar. A

This may be little tough for 10000 sales orders.
1. You have to remove the output record for the irrelevant output record using tcode VV12 for the relevant document type. So now for the document type, the old output wont be triggered.
2. Now, create output records for hte correct output type in VV11 tcode(for the output type BA03) for the document type. Now this output will be triggered for all the document types you are creating from now onwards.
3. To trigger the output type BA03, in all the old orders, you just have to open these sales orders in change mode (VA02), and just save it. When u open it the output type BA03 will be automatically triggered as the master data is maintained in VV11. But because just opening all the 10000 sales orders in VA02 one by one be a mechanical task, you have to think of some tool for this.
May be a CATT procedure can do the trick. Else, you can just create a small program, where you can upload these sales orders and the program will just open these orders in change mode and just saves it (without making any changes). Then the output will be retriggered.
Here again, if you are printing the output directly, it is advisable to trigger the output in batch mode(Date/Time field is 1 in VV11), and then you can again trigger the printing again using the program RSNAST00 after office hours for these 10k orders.
I hope I answered ur query.
Pls lemme know if you need some more info. (You can reward me too...)

New order type for a purchase order similar tu UB.

Hi,
I would like to know if it is possible to create a new order type for a purchase order. This new order type should work as a UB order type but "plant" and "storage location" should be indicated by default and shouldn't be changed.
How should I proceed?
Thanks in advance.
Luis.

The problem is that If I specify default values for each user (plant and storage location) It will always propose these values when using different order types. This can't be.
Isn't there any other solution in standard sap?
Edited by: LUIS ÁLVAREZ on Apr 26, 2010 11:25 AM

NEw output type for GR Slip

Hi Gurus,
The requirement is to set up a New GR slip by copying an existing GR slip from another System. I have identified the program and the Smart Form that needs to be copied. Can you please explain in detail the configuration settings that need to be done so that once the program and the Smart form are linked to the new output type, the GR slip can be operational. Also please let me know the transaction codes also.
Many thanks in advance.

Hi,
As far as I am aware,
1. A new o/p type has to be created
2. Access sequence, can be used, if the existing ones fulfill the criterion(What would be the best combination for a GR Slip?) Otherwise a new one to be created.
3. Create a new condition table.
4. Create Condition records- Can you please let me know the transaction for creating the condition records?
5.Do a MIGO for the condition record combination maintained and see whether the Output type is getting
picked up.
Can you please let me know whether there is something that I have missed out?
Thanks in advance.

New output type for billing documents

Hello All,
We have created a new output type (ZD05) for a billing document to send an automatic mail to "send to Party" along with the existing print output (ZD02).
ZD02 is triggered automatically on saving the billing document where as ZD05 has to be added manually to the output of the billing document.
Every time we add ZD05 manually, system automatically adds/trigger ZD02 automatically along with ZD05. We dont want this additional ZD05 output to be triggered on adding ZD02.
It will be of great help if anyone can let me klnow the configuration setting which we can do to stop this.
Points assured.
Warm Regards,
Jatinder Bansal

Hi there,
Check what do you have in default settings. You should have "send immediately while saving the application" to trigger the O/p immediately. Transmission medium should be external send to trigger it as a mail O/p.
Also maintain the condition records. Only then O/p will trigger automatically.
Try checking the requirement that is assigned to the O/p in the determination procedure. See if there is any condition to triggger ZD05 & ZD02 together.
Regards,
Sivanand

How to Create New Activity Type for Assiged to work centre Costing in Acti

Dear Sir,
We have four activity type to assigned in workcentre Costing Activity. Details are as under
AIRJET     2010     AIRJET
DONIER     2010     DORNIER
SULTEX     2010     SULTEX
SULZER     2010     SULZER
in addition one more loom is comming in our unit and require new activity type.
How can i create new.
Please guide.
Thanks in advance
Regards
Ajit

Dear ,
To create new Activity Type , you need to follow the below steps :
KA01 - Create Primary Cost Element for the new activities type.
KL01 - Create Activity Type tied to the primary cost element.
KP26 - Change Activity Type/Activity Price Planning - maintain the Variable price
Assign the activity type to cost center using T code KP26.
In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal Year as 20xx.
Click on Overview tab on top and key in costing details in this screen.
After performing this ,while creating the work center ,this combination of activity type & cost center should be assigned.
At work centre level , you should have
1.Create Standrad Value Key -OP19 and Formula Key in OP49.
2.Create Formula Parameters in OP7B or u can use existing one to assing in the Standard Value Key
3.In CR02-Assing the Standard value key in Basic Data and select the Formula Key in Costing tab with cost centre assingement .Save
Try and check
Regards
JH

Create new Documentation types for Template project

Hi Expert,
Can anyne tell me the process for creating new documentation types under projects standards tab under solar_project_admin for project?
Thanks,
Basis Admin

Resolved !!!!!

New EDI Output Message for Existing Purchase Order

Hi Everyone,
We have existing POs in our system for vendors that we are turning on SRM Supplier Self Services for. When we configure the new output type, and then we change the purchase order, we are looking for the first SUS output type to come out as an ORDERS message, instead of an ORDCHG.
Is this possible?
Tx
Peter

Dear Peter,
The system automatically creates change messages with message type ORDERS if a second entry for that message type is maintained in the outbound parameters of the vendor's partner profile on tab page "Message Control". In that second entry, set the indicator "Change message". However, all change messages will be ORDERS, not only the first.
Best regards,
Christiane

How to create one inbound delivery for multiple purchase order?

Hi Experts,
Please let me know how can I create one inbound delivery for multiple purchasing documents(PO or SA)?
Is there a configuration needed for this? If yes, please let me know the configuration to make this happen.
Appreciate your help on this. Right answers will be rewarded.
Thank you.
with regards,
Muthu Ganapathy.

Hi,
my situation is:
- a WM managed warehouse, society A;
- a HU managed warehouse (without WM), society B;
- a purchasing process of HU from society A towards society B.
Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
"V51VP - item was not found - process cancelled".
Can you help me to transfer these HU?

IMG settings after creating new output type for a purchase order smartform

Similar Messages

Maybe you are looking for