Immediate attention please help

please help me determine if i have to use bmp in this scenario,
I am positive i have to use bpm in this case:
Sender: r3<idoc> async
Rcv: webservice sync
I need to update the status of the idoc outbound from R3.
Now i know that i can use the systat01 to map back the status of the idoc, But i am pretty sure i have to use a bpm for this, Correct me if i am mistaken:)
Could some1 guide me with the steps involved for this bpm?
also specify # of msg intf requrd for ths wt reasons..
Thank you for your time, full points will be awarded,

check this thread with similar requirement:
Receive response from SOAP adapter without BPM.
Thanks,
Beena.

Similar Messages

My Macbook pro is very slow in oening folders, it does not open immediatly as you would expect and takes about 30s or more. Please help! Here is the spec: OS X 10.8.3 2,3 Gz Intel Core i7 8GB 1600 MHz DDR3

My Macbook pro is very slow in oening folders, it does not open immediatly as you would expect and takes about 30s or more. Please help!
Here is the spec:
OS X 10.8.3
2,3 Gz Intel Core i7
8GB 1600 MHz DDR3

Did u try to rebuild spotlight index? repair permissions? verify disk and repair if needed?
if now, try it out.

Can not select from my own MV. Please help.

Hello Gurus,
I have created a MV with following clauses
CREATE or REPLACE MATERIALIZED VIEW "OWNER_NAME1"."MV_Name1"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE
AS
SELECT column1, column2 .... from table1,table2
where .....
I have logged in to DB with the 'owner_name1' schema itself which is the owner of the MV.
But, when I try to select from the above MV. It gives error "Ora-00942 table or view does not exist"
I can see the same under 'user_objects' view as an object of owner_name1 schema.
Could you please help me in understanding where I have gone wrong?
DB - Oracle 9i on unix platform.
Thanks in advance!
Abhijit.

Oh! I missed to mention the exact steps followed by me which created error for me,
viz.
1) I have 2 Database and their users as follows
bq. i) DB1 in local server - 'localUser'
bq. ii) DB2 in remote server - 'RemoteUser1' and 'RemoteUser2'
2) 'RemoteUser2' user in DB2 has 'select' privilage on table 'RemoteTable1' of 'RemoteUser1' ( both are remote DB's users ! )
i.e. select * from RemoteUser1.RemoteTable1; --works okay when logged into RemoteUser2. no synonyms are created hence using schema_name.table_name convention.
3) Logged in to 'localUser' in DB1.
4) Created a DB link 'local_to_remote2' in 'localUser' schema ( in DB1) to 'RemoteUser2' schema (in DB2)
i.e.
create database link local_to_remote2 connect to RemoteUser2 identified by password using 'connection_string';
DBLink was created successfully.
5) I could select from the tables of 'RemoteUser2' using DB Link. (by logging in to 'localUser')
i.e. select * from RemoteUser1.RemoteTable1@local_to_remote2 ; --- gives me expected output. no issues!
6) Now, I created below MV in 'localUser' ( no need to tell in 'DB1' )
the exact syntax I used is as follows,
CREATE or REPLACE MATERIALIZED VIEW "localUser"."MV_Name1"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE
AS
SELECT column1, column2
From RemoteUser1.RemoteTable1@local_to_remote2
where condition1
and condition2;
The MV was created successfully, and I could see it as an 'Valid' object of 'localUser' schema.
i.e. select * from user_objects where object_name ='MV_NAME1' and status ='VALID' --- tells that above create MV is an object of owner 'localUser'
But, when I try to select from the said MV. it gives me error "Ora-00942 table or view does not exist"
i.e. select * from MV_Name1; ---- neither this
select * from localUser.MV_Name1; ---- nor this works :(
Even when I try to drop the same MV it gives me same error. :(
Could you please suggest me anything so that I will be able to select from MY OWN MV ?
Please help Gurus.

My iPhone 4 will not let me play my music I bought on iTunes or pandora or YouTube with out my headphones or speakers plugged in. I can play my ringtone without them plugged in but that's all. Also my iPhone will not turn off. Please help

I tried resisting my phone it didnt work. Please help? This is the first time it has ever happens and has been doing it for a week. The sound will only play without headphones or speakers is when I'm listening to my ringtone. And my phone won't turn off. It turns off then just turns back on.

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

I have a problem with my win 8 system please help

hi.
yesterday I got the msi gt70 I ordered in the mail everything is working good accept one thing.
whenever I try to install an app (no matter what kind, I tried solitaire and Skype) the app is going up and immediately shuts down nothing happens.
I tried to look it up on the web and did everything it says but nothing helped.
please help me I want thing to work properly.
ty for your attention.

I have the exact same problem in my GT70-0ND-447 with Windows 8 SL x64.
Skype, Ebay and some other Metro style applications does not work.
When I start the application startup screen appears, and then almost immediately closes.
Applications can be seen in the drop down list on the left, but they do not work. In the system log I see a message "The server not register with App DCOM within the required timeout" (error 10010).
Event for Ebay under Microsoft-Windows-TWinUI/Operational: "Activation of the app eBayInc.eBay_1618n3s9xq8tw!App for the Windows.Launch contract failed with error: The app didn't start." (error 5961).
I wrote to support. Waiting...
Please help!

Please help me install this audio player!

Hello anyone reading this,
I am very new to designing a website, and decided to venture out and add some audio to it. I am a piano instructor and am VERY determined to do this.
I recently purchased some files from this site:
http://www.flashcomponents.net/component/advanced-mp3-player-with-play list-totally-customizable-xml-driven.html
That is the same exact one I purchased.
I recently engaged in a little email session with the author / developer and he was sending me emails that had a lot of technical language of which I couldn't understand. I needed help, and he didn't seem to pay much attention to my problem, just kept repeating the same thing.
I eventually was able to research his terminology and I finally got around to being able to comprehend his 'steps' listed for me to get this thing up and running.
He basically said everything I needed was in a folder titled 'deploy' ... and that I just copy that folder into my Dreamweaver site project , along with my images, root folder, etc. Ok, easy enough. I did that.
His next step was to insert the .swf file into my web page in Dreamweaver. Ok, easy enough. Did that. BUT, there is a problem. A fairly large grey box shows up with an F inside it. This is in 'design' view. In 'Live view', I see nothing at all of the player, just a large grey box with no F inside it.
The peculiar thing is that there are 3 files inside this 'deploy' folder that when I double click them ... a beautiful audio mp3 player pops up and performs perfectly. It's the real thing. Just when I insert the .swf file into my site, nothing at all happens. And this was what the guy told me to do.
Since then he stopped corresponding with me. Not sure why. Here are the files I have in 'Deploy'.
playlist.xml
playerstyles.css
playersettings_v4.xml
Mp3player_v4.swf
index.php
index.html
BG.jpg
AC_RunActiveContent.js
The 2 index files open up a perfect audio player as shown on the site. So does the Mp3player_f4.swf.
I also have a folder called 'scripts' that has 2 scripts listed for the audio player.
swfobject_modified.js
expressInstall.swf
Please oh please, if any of this makes any sense and if what I typed is a symptom of something, please help me. I am desperate as all the research I've done is getting me nowhere!!!

Your testing confirms my suspicion that it’s a pathing problem
“Then I tested out the index.html and the index.php files that are located in 'deploy'
They didn't work. no image at all ... nothing. “
That is working correctly. If you path it to work from the Web page, of course it will not work from “index.html” in the deploy folder… it’s not supposed to. It’s supposed to work from the Web page one folder level up. Did you test it from YOUR Web page after changing the paths?
“I noticed that as I said the index.html and the index.php didn't work ... but the mp3player_v4.swf STILL worked perfectly fine. All 3 of those files are under 'deploy'”
This is also to be expected, because when testing the .swf directly (not on YOUR Web page), the paths in the xml file to the mp3s is correct. But remember, when you place that .swf on YOUR Web page, you are removing the .swf from “deploy” and placing it in the same folder as your Web page….. it’s not in deploy anymore.
“Also, a peculiar thing happened as well as I was playing around with things. “
Well for testing you could take everthing out of “deploy” and move it into the same folder as YOUR Web page and just change the path on your web page to the .swf (delete the “deploy/” part). Now every thing is in the root folder, there is no deploy folder, only a “sound” folder which holds the mp3s and the palyer would work just fine, because RELATIVE to the location of the .swf on the WEB PAGE, all the paths are correct.
But then you don’t really learn how to resolve pathing issues.

Lost document on my new MAC because I accidentally saved on another account that I had no permission to save to..now I don't know where the doc is but I just know its somewhere on the computer..maybe the temp files or something?!sos! please help me!!

I saved a document, while logged in as a Guest, to another user account [it was set up for some reason to save like that (I guess the person who used computer last did that) and I didn't check before "saving"] on accident. Of course I didn't have permission to save on the other user's account but I was in a rush and so I figured everything was fine but later I found that there was a message warning me saying it did not save because it couldn't save because I had no permission to save on that account and gave me the option to duplicate or cancel.. I wasn't paying attention so I can't remember which button I hit but clearly it wasn't "duplicate"
I took hours perfecting this document and now I can't find it.. anywhere!
Where do these types of things go when this happens.. I know it's somewhere on the computer but where?? SOS I need the doc and I'm hoping I can find it
I guess it's the same as someone who accidnetly hits "don't save"... question still stands.. please anyone help me!!!
I'm trying to use Disk Drill but I only found things from November and it seems like it only shows files that have been physically/manually deleted..and my TIME MACHINE WAS NOT SET UP..because we recently got this MAC computer and had no clue what it was
maybe its in some temp files somewhere..where do not saved documents go.. i know that it is probably writable but I know that is probably still exists
ANYONE WITH INFO PLEASE PLEASE HELP!!

tis true
I know, I always do that but I was in a rush to get somewhere and I was relying on my thousand dollar Mac to do some kind of recovery or something. I know Microsoft always keeps temporary files (I think Mac does too, part of me asking here in this forum was for someone to tell me where I can find those files) and when you go to open Office Works then it gives you the option of opening the last recent documents, saved or not saved.
I usually copy paste into my emial just in case something goes wrong with the created document but I just didn't have the time to login and do all that My loss, you live and you learn, BUT still if ANYONE got any info on this, PLEASE DO CHIME IN *keeping the hope alive*

My Laptop failed. Please help

Hi guys, so 3 days ago My laptop "crashed". I can't really find any other word to describe but basically I was unable to boot up pass the grey screen. It just shut down.
So I decided to go into the Recovery Mode to restore my Macbook from scratch, however, all I have done is failure. I cannot reinstall Mac OS Lion. I cannot install Mac Leopard from the disc. I only need a MAC OS X so I can get access to my encrypted WD Hard Drive and back it up from Time Machine.
All details of my case can be found from this quote, which is a thread that I started on a different forum.
Thanks for paying attention and please help me. I'm having exam in 2 days and now I'm stuck with this Safari-only brick.
Hi guys, I'm a new member of this forum. Right now I am posting this in Recovery Mode on my Macbook Pro. I'm having an exam in 2 days and now I am stuck fixing my laptop
My laptop is the early 2011 model 2.3 Ghz Macbook Pro. Since I bought it I haven't done any modification to the hardware. All I have been doing is surfing Internet and recently I have been playing Diablo.
I take care of my laptop but it fails me.
Recently I experienced terrible performance on my laptop. Starting with whatever that has to do with flash, anything, music from myspace, Youtube ..etc.. that is played on Safari, it just freezes safari and my Mac very often. Whenever I play Youtube, it normally plays smooth for 1 or 2 videos and then start freezing up, the video would be frozen but the sound still goes. It's very annoying.
Until 3 days ago, my Mac just goes frozen, everything, Finder, VLC ..etc.. in a time interval. I could not even watch a movie on my laptop, VLC just got frozen every 2 minutes. Even when I use Finder to open through my files, it just freezes often. I had to restart before being able to watch a movie.
Eventually, yesterday, everything goes back again. I thought the restart fixed my issue. Suddenly my whole macbook freezes. Let me say this again, MY WHOLE MACBOOK, everything. I have never experienced this, even my mouse, I could not do anything other than hitting the power button to force restart.
After this, I can't get my Macbook to boot up. It would not go pass the grey screen. The first time it starts up, it took me 30 minutes to fully finish the loading bar at the grey Apple screen. It let it load, thinking it would take a while then everything will be back into places. Then it shuts down. After that, I tried like 10 times but nothing happens, after passing the grey screen the macbook just shuts down itself.
So I went into a Hardware test. I tried several times but It always stucks at Pass Item 1, testing items. It would come to a phase when the mouse responsiveness is very slow and I could not stop it by Command + . like instructed but had to force shut down.
I went into Recovery Mode, verify my HD, repair it. I believe my HD is fine, the S.M.A.R.T status says verified. I'm lucky my Hard Drive is not failed. So I erase my whole HD to restore it fresh.
I have everything backed up on a WD Mybook 2 TB Hard drive. However I cannot use this by any chance because I foolishly encrypted my whole external hard drive. Normally everytime I plug it in I had to put my passcode through an application called "WD UNLOCKER". Now that I can't access to anything except the Recovery Mode. I could not unlock my HD to use the backup. I did try the Backing up from Time Machine option, however my Time Machine HD would not show up, simply because it is not unlocked yet. If anyone knows how to unlock this, or to access WD UNLOCKER from Terminal, please tell me.
I tried reinstalling Mac Os Lion from the Recovery Mode. The first time I let it start and went to work. After 6 hours I came back and it was stuck at "Downloading additional components .. ". It would not change, it was stuck. My internet connection is VERY stable because during the whole time, i use my iPhone to access the Internet.
I tried the second time reinstalling Mac Lion last night. It was going all right. It finished the first phase then got into "Downloading Additional Component" again, this time it was going VERY VERY slow. So I slept for 4 hours, I woke up this morning and saw my laptop screen on the Recover Mode with the 4 options shown, nothing has changed. I didn't know what happened but I don't think I will try downloading 4 GB of Lion again.
Last night, I also try installing Mac Leopard from the startup disc. But it took very slow. Nothing froze but the ETA was stuck at 21 minutes remaining and it would not move. So I think I will try this again today and leave it while I go to work.
I need to install some type of system on my Mac in order to get access to my Time Machine backup HD and restore it. If my Snow Leopard install is successful, I will upgrade it back to Lion by any mean.
Update : Installing Mac leopard failed twice due to : " Could not copy necessary support files ".
Thank you for paying attention to my post and read the whole thing. Please, please help me with this.

Go rerun the Apple hardware test, run the extended test, and let it finish. It can take anwhere from 30 minutes to 2 hours to complete. Pass 1 is the memory pass and takes the longest time of the test to complete.
I've downloaded Lion several times, and it usually takes 3.5 to 4 hours. If your internet connection wasn't a fast one, although stable, it could take longer.
Everything you've described sounds like a failing hard drive. When you initialized it, did you do a security write of zero's to the hard drive? That also resets the bad sector table, and can help get a bit more life out of a failing drive. If not, boot up on the Leopard disk, bring up Disk Utility, and erase the hard drive, clicking on secruity options, and write zero's to the hard drive. This takes ahwile so let it complete. Then reinstall the operating system.
When you get the system going again, I would download SMART Utility to get a better readout on your hard drive's health. The hard drive can be failing before it trips what Disk Utility reports for the one SMART status.

Please help me urgently (Problem in using delete statement)

Hello,
I want to run delete query where table name should come from a variable .I have written the following procedure but its not working .Could you please help me
DECLARE
processtemplatename VARCHAR2(64);
CURSOR T1Cursor IS
select Process_template_name from ProcessTemplate
where PROCESS_template_ID in
( select PROCESS_template_ID from PROCESSINSTANCE
where process_instance_id in
(select process_instance_id from processinstance where STATUS = 'PI_COMPLETED' OR STATUS = 'PI_REMOVED' ));
BEGIN
OPEN T1Cursor;
LOOP
FETCH T1Cursor INTO processtemplatename;
EXIT WHEN T1Cursor%NOTFOUND;
DELETE FROM processtemplatename WHERE process_instance_id in
( select process_instance_id from PROCESSINSTANCE where STATUS = 'PI_COMPLETED' OR STATUS = 'PI_REMOVED' );
END LOOP;
CLOSE T1Cursor;
END;
I am getting the error
ERROR at line 19:
ORA-06550: line 19, column 27:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 19, column 15:
PL/SQL: SQL Statement ignored
even when i used
DECLARE
processtemplatename VARCHAR2(64);
BEGIN
processtemplatename := 'example1';
DELETE FROM processtemplatename WHERE process_instance_id in
( select process_instance_id from PROCESSINSTANCE where STATUS = 'PI_COMPLETED' OR STATUS = 'PI_REMOVED' );
END;
I am still getting the same error message
Thanks,
Salam.

And BTW you do not need that clumsy CURSOR c.. OPEN c.. FETCH c INTO... CLOSE c etc. It is "reserved" for more complex cases when you cannot use:
<pre>
FOR P IN
     select Process_template_name
          from ProcessTemplate
          where PROCESS_template_ID in
               (select PROCESS_template_ID
                    from PROCESSINSTANCE
                    where process_instance_id in
                         (select process_instance_id
                              from processinstance
                              where STATUS = 'PI_COMPLETED'
                                   OR STATUS = 'PI_REMOVED'
LOOP
     EXECUTE IMMEDIATE
          'DELETE FROM ' || P.Process_template_name ||
               ' WHERE process_instance_id in
                    (select process_instance_id
                         from PROCESSINSTANCE
                         where STATUS = ''PI_COMPLETED'' OR STATUS = ''PI_REMOVED''
END LOOP;
</pre>

My IPhone 5 will not turn on, I had a new screen I stalled, all working great, the next day I was flying so turn off the phone and since trying to turn back in again,,, I receive many lines of white text stating incorrect shutdown please help

hhello, please help if you can,,,
i had a new screen installed, everything working fine, as was using the phone, the next day I was flying so turn off the phone in the usual way...
oon arrival turned the phone on, received a slow acting black background with the apple sign visual, but never moved from that......... So tried a reset still the same just left looking at the apple sing in the middle if the screen,makes it there for 5 mins but still never turn on completely,,,,,
again I tried,,,,,, again I tried a reset, then started to received lines of white writing, about 4-5 lines slowly like it was being typed, which stateed INCORRECT SHUTDOWN, ????????? then took out my MacBook air, to connect to ITunes to see whaypt I could do,
i tunes did not find the phone as would normally so opened ITunes manually, still did not find the Iphone,,,,,
Any Ideas please, as it is useless stuck in the drawer, I am an apple user, an quite knowledgable having other Iphine 5, IPad air and Mac,,,,, I am stuck,,,,
PLease Help,my hank you in advance

SharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D

HT5278 My words with friends kept disappearing on screen 3 seconds after opening. So I deleted & reinstalled it today 8/17/12 & it still happens. I'm so frustrated I dont know what to do next. Please help me w/this

My iPad 1 doesn't stay logged on. It stays @ 3 seconds.this has been happening for a week s I deleted that app, & downloaded another, same one & STILL won't stay opened on page. Please help me figure this out. Very much appreciated. Thank you, Connie Sypriano

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

PLease help me to configure

Hello Friends,
I need your help to configure my voice setup.I have two location connected with a point-to-point leased line. Both the ends have different brand pbx installed. One is connected with R1 with the help pf a T1 voice card and Other is connected with R2 with the help of a E1 card. I am giving an attachment of the scnerio. Please help me to configure the cisco 3640 routers with H.323 gateway. I will be very thankful to you.My bosses has given me this work to do. Now I need your help. I have some exerience to configure E1 and T1 cards also have some knowledge of configuring dial pears.
Thanks.

Ok, this was the 2nd thing I was just about to recommend, and that was to not Trunk due to the E1/T1 limitation and just terminate and route everything H323. Both sides are CAS, just one is E&M Immediate and the other is R2-Digital. Unlike the 1st document I linked you are not trunking the connections you are using a PLAR to a voice-port. Essentially you are using a H323 dialplan to do this in a limited fashion.
Unfortunately CAS doesn't support ANI unless you use FGD or FGD-EANA on the T1 side Router and PBX. Not totally sure on the R2 side but I believe you need to configure your PBX and R2 router to use R2-Digital Compelled, non-compelled or semi-compelled to get ANI information on that side.
Reference these documents.
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800e2560.shtml
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800943c2.shtml
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tdia_r/dia_d2ht.htm#wp1010243
Please rate any helpful posts
Thanks
Fred

Banned from a website. Need to use for work. Please help.

I was recently banned from a website. I didn't do anything wrong and they won't tell me why I have been banned. My husband had an account on the website and as soon as they closed my account, they also closed his. We don't know if someone else used out IP address on this site and violated their rules or if we unknowingly violated their rules ourselves; they won't tell us.
The problem is that we need to be able to access this website for our work. We work from home and it's essential. We weren't sure if they had banned us by IP address, so we had a friend create an account. The account is legit and legal. He then gave us the username and password. We accessed the account from our computer at home and the account was almost immediately shut down. The friend was able to straighten things out with the company and get the account set back up, but we cannot use our computer at home to access this site. It's obvious that any access by this IP address will result in ANY account being closed.
We have a PC desktop, a MacBook laptop, and a wireless connection for the laptop (not sure how much info is needed, so I'm trying to be thorough).
I'm not going to ask someone to help me hack a site or anything. And after hours of research, I think we understand enough about proxy servers to use one of those effectively. I also know that I can call my ISP and request an IP address change (which may or may not be honored).
However, I have read other message boards and learned about cookies that websites send to your computer to identify you. I understand that most of those cookies can be cleared out by simply clearing the info from the browsing history (including cache, cookies, etc.) But I also read that they sometimes send files that are buried deeper in the computer. So here's my question...
How can I erase EVERYTHING that this website might have sent to my computer to be able to identify it? I must use the laptop to access the website. I'll work on the IP address issue on my own. But we can't use the desktop to access the site for reasons that are irrelevant and the explanation would be even more long-winded than what I've already typed here. We have to use the laptop. And I need to be ABSOLUTELY certain that the site can't identify the computer. I won't try to use my friend's account again until I'm certain that it won't be closed.
Let me reiterate this for those who are concerned: the friend has give permission for us to use his account, we have done nothing illegal on the website we've been blocked from, nor do we plan to do anything illegal on the website. We have done nothing illegal in any way, and I want LEGAL solutions to this problem. If we are not able to access this website, we will suffer financially in a severe way and are desperate to make sure that we can clear out cookies or whatever other tracking info has been put into the MacBook.
Can someone please help us?

Thank you for the info on onyx. I will try that. I actually took my computer to the Apple store and someone there "cleaned" it out for me.
As for why we can't resolve the issue with the website, we tried to talk to them about it but they just cut us off and said they weren't going to discuss it and that they wouldn't reopen the account.
We have one account as employees and the other accounts (the ones that were closed) were customer accounts. The two departments are separate, and we do not want to bring our account to their attention again and risk them connecting the customer accounts with the employee account and then closing the employee account as well.
We were using the customer account to monitor the employee account. Quality of video and sound, that kind of thing. Nothing fishy there. But since the guy on the phone didn't make the connection that it was our own account we were monitoring, he shut us down. Customers do the same thing to us and basically rip us off for thousands of dollars every week, and the company never gives those customers any trouble about it. So it's unbelievably frustrating. Also, we figured out how to do this by watching the activity of the other employees, since there's no "training" and we all learn from one another by watching. We don't know what would happen if someone there made the connection... whether they would just say "oops" and reopen the customer accounts, or whether they would be irritated about us using the customer accounts in that way and just shut us down completely. We'd rather not find out.
As of now, we're using a friend's account to monitor our video and sound quality. But we're still using the same computer. That's why it needed to be "cleaned."

My ipod touch is in DFU mode 5g I need help, do not want to lose my data, please help in Spanish

I need help, do not want to lose my data, PLEASE HELP IN SPANISH

Una vez que el dispositivo está pidiendo ser restaurado con iTunes ... ya es demasiado tarde para salvar nada ... y usted debe continuar con la recuperación de ...
Vea aquí> http://support.apple.com/kb/HT1808
Es posible que tenga que probar más de una vez ... Asegúrese de seguir todos los pasos ...
Tómese su tiempo ... Preste especial atención a los pasos 3 y 4.
Para minimizar la pérdida ...
Después de haber recuperado su dispositivo ...
Re-sincronizar su contenido o restauración de la última copia de seguridad ...
Restaurar desde copia de seguridad> http://support.apple.com/kb/ht1766
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
To minimise loss...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

Error while Creating sequence. Please help

I'm using below script to create sequence but getting error
Error report:
SQL Error: ORA-01722: invalid number
01722. 00000 - "invalid number"
CREATE SEQUENCE BL_BTN_MASTER_SEQ
MINVALUE 1
MAXVALUE 999999999999999999
INCREMENT BY 1
START WITH (SELECT MAX(BULLETIN_MASTER_ID)+1
FROM BL_BTN_MASTER)
NOCACHE;
FYI..Data type of bulletin_master_id column is NUMBER(22,0)
PLease help.
Edited by: user11228834 on May 29, 2013 10:22 AM
Edited by: user11228834 on May 29, 2013 10:23 AM
Edited by: user11228834 on May 29, 2013 10:25 AM

Oracle doesn't like the "(select max(bulletin_master_id)+1 from bl_btn_master)' statement embedded in the CREATE SEQUENCE statement because if you look at the syntax it is expecting an acual number. You could use execute immediate to create the sequence this way:
{code}
declare
v_seq number;
v_statement varchar2(200);
begin
select max(bulletin_master_id)+1
into v_seq
from bl_btn_master;
v_statement := 'CREATE SEQUENCE BL_BTN_MASTER_SEQ ' ||
'MINVALUE 1 ' ||
'MAXVALUE 999999999999999999 ' ||
'INCREMENT BY 1 ' ||
'START WITH ' || v_seq ||
'NOCACHE';
execute immediate(v_statement);
end;
{code}

Immediate attention please help

Similar Messages

Maybe you are looking for