Immediate Request to developers: WARN TO USE CHARGER with update !

For the second time i fell for an ipod mini update without having my charger with me.
WHY does apple require the charger to be present while updating the ipod mini firmware?
AND if it is so WHY do developers NOT put a warning into the installation routine TO NOT UPDATE if the charger is not present?
i travel a lot and never have my charger with me (how many chargers does the industry want me to carry for my digital lifestyle: 1 for my pda, 1 for my phone, 1 for my laptop, 1 for my camera, 1 for my ipod? - this is SICK). the ipod mini can be charged using an USB cable to a laptop so why require a charger at all?? so this time again it means no ipod until i get to my second home where i have my charger. another 5 hour trainride without entertainment ...
it takes very little to make users happy - so please do it!
rgl

Older iPods (including the first generation mini) required this step to complete the process when updating via a usb connection. Newer iPods (inc the mini 2nd gen) don't need this step any longer.
There were a few complaints like yours about this so I guess that's why Apple changed the process. I agree, it's not immediately obvious that this step is needed, although it is clearly stated on the Apple kb article on how to update the iPod.
http://docs.info.apple.com/article.html?artnum=60944
If you think the warning needs to be made more visible, then suggest it here.
http://www.apple.com/feedback/ipod.html
Btw, I have to ask this. Why, having been caught out on a previous occasion did you "fall" for it a second time?! : -0

Similar Messages

Not Able To Use Acrobat With Updates

Hello,
When I slipstream all the quarterly updates through 9.5.5 into an original installation of Acrobat Pro 9 Extended which is version 9.0 the installer loads as version 9.5.5 and successfully installs Acrobat as a version 9.5.5 but when I open Acrobat and accept the license agreement I immediately receive a popup message that says the program is broke and cannot be used due to license discrepancies to reinstall it then when I click OK or terminate the process that generated the message Acrobat closes. If I install Acrobat as version 9.0 and manually apply the updates through 9.5.5 Acrobat works with no problems. Any assistance in helping me resolve the problem would be appreciated.
My reason for wanting to install version 9.0 as version 9.5.5 is I thought it might take up less space on my hard drive but it doesn't it still uses about 4.6GB of space which is significantly more than any other program on my computer. When I tried customizing the installation with the customization tool by selecting do not copy the installation files to the hard drive Acrobat still created over a gigabit of installer files in the installer folder in the Windows directory and created over a gigabit of update files in its folder under programs. Acrobat is quite a pig isn't it I am saddened to see that this is what hard drive space is being used for in world of larger hard drives. I would like to see programs like Acrobat function with 500 characters of code or less. That would be intuitive wouldn't it.
Sincerely,

I have never heard of slipstreaming the updates with the original install, only with updates themselves. I suspect that may be related in some sense, but just a guess.

How to use CASE with UPDATE?

Hi all. I'm trying to update multiple rows in a MS-Access
database using a single query, with different values for each row.
Here's a simplified example of the code:
<cfquery name="JustInCase" datasource="variables.DB">
Update Users
SET First_Name =
CASE WHEN ID = 1 THEN 'Nini' END,
SET Last_Name
CASE WHEN ID = 32 THEN 'Yumpi' END
</cfquery>
Trying to run something like this produces the following
error message:
[Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error
(missing operator) in query expression 'CASE WHEN ID = 1 THEN
'Nini' END'.
I realize this can easily be done using multiple queries, but
the actual code will contain many updates, and I would like to at
least test the possibility of improving performance using a single
query instead of multiple queries. I would greatly appreciate any
help with this - I've been trying all kinds of variations, and
nothing seems to satisfy emperor ColdFusion. Any ideas?

Case might be a verity tag but it is also a valid sql keyword
in many dbs. I use it in select clauses frequently and have seen it
used in where clauses.
The problem with the original query is that, it the value of
id is not 1, this part
SET First_Name =
CASE WHEN ID = 1 THEN 'Nini' END,
will cause a syntax error. For those values of 1 and 32, this
syntax will run, but will update every row in the table which might
not be the plan.
update users
set
case when id = 1 then first_name = 'Nini'
when id = 32 then last_name = 'Yumpi'
else first_name = first_name
end
ranger, your code will also fail if the value is neither 1
nor 32. You need a default case.

Warning! Using SuperDuper to clone from an HDD to an SSD might seriously da

WARNING! USING SUPERDUPER TO CLONE FROM AN HDD TO AN SSD MIGHT SERIOUSLY DAMAGE THE HEALTH OF YOUR SSD!
This is the new thread which I referred to when replying to:
http://discussions.apple.com/thread.jspa?threadID=2274972&start=0&tstart=0
I used SuperDuper to clone from a VelociRaptor 300GB HDD to an OCZ Agility EX SLC SSD, with disastrous results.
To save me the time of rewriting all the events please refer to the following emails and online submissions:
(Biltan-Wales - 21 Dec 2009 - 11.02 GMT):-
After reading several very favourable product reviews of the above SSD, I have just purchased one from Aria Technology Ltd., to use as a boot drive for my (early 2009) 8-Core 2.93GHz Intel Xeon Nehalem desktop workstation.
Also, prior to purchase of an OCZ SSD, I posted a question on Apple's Discussions' Forum:
http://discussions.apple.com/thread.jspa?threadID=2263023&tstart=0
From the response to this, and from reading several other threads regarding SSDs, I found that several Mac Pro owners are using OCZ SSDs as boot drives, and in some cases employing up to 3 of them.
I received my Agility EX from Aria on 16th. December, and yesterday afternoon I decided to set up my boot drive and 4 drive RAID 0, as described in: http://discussions.apple.com/thread.jspa?threadID=2263023&tstart=0
First of all I used SuperDuper to clone from my VelociRaptor 300GB drive in Bay 1, to my original Apple (WD) 640GB drive in Bay 2.
Then I removed the original Apple drive, and installed it in an ONNTO dataTale TQ-M12H external single enclosure, using a Firewire 800 interface connection. Next I selected this as my boot drive to check it would boot OK, restarted my system, and there was no problem.
So my next step was to install the Agility EX, and another 3 VelociRaptor 300GB drives, in the Mac pro workstation.
First, I reselected VelociRaptor 1 as my boot drive, so that I could use SuperDuper to clone to the Agility EX.
The Agility EX was installed in the lower of the 2 optical bays, and was connected to the pre-wired SATA and power cable, and the VelociRaptors were placed in hard drive bays 2, 3, and 4.
I then started up the Mac Pro, and there were 4 message boxes on the desktop, requesting that the drives should be initialised. So then I used Disk Utility to initialise the 4 drives. The SSD was named "Agility EX Boot", and the others "VelociRaptor 2", VelociRaptor 3, and VelociRaptor 4". The Mac system accepted all 4, and mounted desk top icons for each drive. I cannot remember the exact figure, but the Agility EX was listed as approx. 64GB in Disk Utility after its initialisation. All 4 VelociRaptors are shown as 300.07GB. All drives were formatted as Mac OS Extended (Journaled).
The next stage was to use SuperDuper to clone from VelociRaptor 1 to the Agility EX Boot drive.
Everything was fine until 28.00GB had been copied, and then nothing more would copy. The total to be cloned was just under 30GB, which should not have been a problem with a SSD disk capacity of approx. 64GB, but everything was frozen at that point - exactly 28.00GB!
Eventually, my only option was to stop the process, and quit Super Duper.
Then I restarted the system to try again, but this is where there is a real problem now!
My system does not recognise the Agility EX at all now! Also, it is no longer listed in Disk Utility!
The system does not even acknowledge its existence! It is not even shown on the desktop at start-up, whereas I thought that perhaps there might have been another message box requesting that it should be reinitialised.
I tried disconnecting and reconnecting everything - all drives, interface connections, power cables etc., but to no avail!
This morning I tried this again, but still I cannot get my system to even acknowledge the Agility EX, let alone list it!
So at the moment I am still using VelociRaptor 1 as my boot drive, and, in fact, as my main drive, because I am reluctant to use it with the 3 other VelociRaptors as a 4 drive RAID 0 set up until I get this problem with the Agility EX resolved.
(OCZ - 22 Dec 2009 - 18.29 GMT):-
Cloning from a HDD to an SSD is very problematic. I strongly recommend against doing this. Instead you will want to just install normally onto the SSD. You can clone from SSD to SSD, or from HDD to HDD, but going from one to the other can cause issues.
Try disconnecting the drive from the computer for an hour or so. This will allow all power in the drive to fully discharge. This is a way of resetting the drive that can usually recover the drive. Then plug the drive back in. Does the drive show up again?
If so, delete the partition on the drive, then create a new partition and then install the OS onto it clean rather than clone the OS onto the drive. That should resolve the issues you are having.
(Biltan-Wales - 23 Dec 2009 - 16.19 GMT):-
Thank you for your advice.
I have now disconnected the Agility EX SSD, and removed it from my Mac Pro's lower optical bay.
As Christmas is imminent, and I will not be using my system very much over the next few days, I will leave the drive for 4 to 5 days to allow ample time for all the power to discharge.
Then I will reconnect it, and I will let you know whether or not the drive is recognised by my system.
I was not aware that cloning from a HDD to an SSD could be problematic. Several threads on the Apple Support Discussion Forum have recommended using SuperDuper or Carbon Copy Cloner for this purpose. SuperDuper is the preferred option of most Forum members, whereas Lloyd Chambers (diglloyd.com), author of "macperformanceguide.com", uses Carbon Copy Cloner to clone his HDD boot drives to his Intel and Crucial SSDs.
After the Agility EX had been set up as my system boot drive, my intention was to use SuperDuper to clone from it to my original Apple (WD) HDD, now in an external enclosure with Firewire 800 interface, and then use SuperDuper's Smart Update for regular backups, so that I always had an up to date spare boot drive for the OS and applications.
The current VelociRaptor 1 boot drive would then be erased, and I would then use the Mac OS Disk Utility to create a 4 drive software RAID ) with the other 3 VelociRaptors, and this would be backed up using Time Machine to my existing WD My Book Studio Edition II 2TB External Hard Drive.
Please correct me if I have misunderstood your advice, but are you saying that I should only use another SSD, and not my original Apple (WD) HDD, as my back-up external boot drive? I don't know of any other Mac users who are using SSDs for that purpose, possibly because of the prohibitive cost of doing so.
I am more than happy to follow your advice to reinstall the Mac OS and my applications cleanly onto the Agility EX, and, in fact, I did exactly that with my first VelociRaptor HDD, before I had SuperDuper. However, that would still leave me with the problem of how to set up and maintain an external back-up system boot drive, without incurring the expense of another SSD. Any suggestions please?
Anyway the most important matter is the existing problem, and I am hoping that following your advice will resolve this.
I will contact you again early next week. In the meantime have a very enjoyable Christmas!
(OCZ - 24 Dec 2009 - 00.25 GMT):-
If the image is of an HDD and that image is then cloned onto an SSD that does tend to be problematic. I do not recommend doing this, as an image of the HDD somewhat regularly does fail to copy onto an SSD and still remain functional or fast.
You can store the image file on any sort of drive. Storing the image file is fine, as that is just a digital file, so the storage medium doesn't matter. Its actually applying that image to a drive is where the problems often occur.
You can image from a HDD to a HDD just fine, or an SSD to an SSD just fine, but going from one to the other is problematic enough that I recommend not doing this. Sometimes it works just fine, but other times it can fail catastrophically to the point of even bricking the drive. To error on the side of caution I recommend just going a clean install on the new SSD.
Once you have that clean install done you can then take an image of that SSD and image on to other SSD's, or store the image on a HDD for backup purposes.
(Biltan-Wales - 29 Dec 2009 - 13.16 GMT)
Thank you for your last email.
Further to your previous email, and my reply of 23/12/2009. this morning I reconnected the Agility EX SSD.
However, unfortunately, the drive has not showed up again on my system. There is no icon for it on the desktop, nor is it listed in Disk utility.
When I checked Serial-ATAS in my Mac Pro's System Profiler, all 6 Intel ICH10 AHCI are listed in the Serial-ATA Device Tree, but, whereas all my other drives are sub-listed, there is nothing underneath the ICH10 AHCI for the lower optical bay.
As the drive has had 6 days to discharge and reset, it would appear that it has not recovered.
Where do I go from here?
I am still awaiting a reply from OCZ, but that is not surprising, because of the different time zones and the Christmas?New Year holiday period.
In the meantime does anybody else have any ideas, please?

Hi thanon,
"So the SSD is not visible, not even in disk utility, even after a restart ?":-
No.
"Check the log of SuperDuper (Window-Show Log); warnings are in red, I think.":-
This is a copy of the log, but it only refers to the original Mac (WD) drive as the Target Volume and it only lists the last Smart Update. There is no record of the original cloning to the same drive on 21st. December, nor of the interim Smart Updates. There is no record logged at all for the OCZ Agility EX SSD, despite the unsuccessful cloning attempt on 21st. December:-
| 11:39:15 AM | Info | SuperDuper!, 2.6.2 (87), path: /Applications/SuperDuper!.app, Mac OS 10.6.2 build 10C540 (i386)
| 11:39:15 AM | Info | Started on Sun, Dec 27, 2009 at 11:39 AM
| 11:39:15 AM | Info | Source Volume: VelociRaptor 1, mount: /, device: /dev/disk3s2, media: WDC WD3000HLFS-01G6U1, interconnect: Internal SATA, file system: "Journaled HFS+", OS: 10.6.2 (10C540), capacity: 299.73 GB, used: 30.53 GB, directories: 164608, files: 521266, ejectable: NO, ACLs: Enabled
| 11:39:15 AM | Info | Target Volume: Untitled 1, mount: /Volumes/Untitled 1, device: /dev/disk5s2, media: Ext Hard Disk, interconnect: External FireWire, file system: "Journaled HFS+", OS: 10.6.2 (10C540), capacity: 639.79 GB, used: 30.27 GB, directories: 164519, files: 522654, ejectable: YES, ACLs: Enabled
| 11:39:15 AM | Info | Copy Mode : Smart Update
| 11:39:15 AM | Info | Copy Script : Backup - all files.dset
| 11:39:15 AM | Info | Transcript : BuildTranscript.plist
| 11:39:15 AM | Info | PHASE: 1. Prepare to Copy Files
| 11:39:15 AM | Info | ...ACTION: Preparing VelociRaptor 1
| 11:39:15 AM | Info | ......COMMAND => Verifying the integrity of volinfo.database
| 11:39:15 AM | Info | volinfo.database OK
| 11:39:15 AM | Info | ......COMMAND => Enabling permissions on VelociRaptor 1
| 11:39:15 AM | Info | Refreshing Disk Arbitration ...
| 11:39:15 AM | Info | ......COMMAND => Verifying that permissions are enabled for VelociRaptor 1
| 11:39:15 AM | Info | Permissions on '/' are enabled.
| 11:39:15 AM | Info | ...ACTION: Preparing Untitled 1
| 11:39:15 AM | Info | ......COMMAND => Enabling permissions on Untitled 1
| 11:39:15 AM | Info | Refreshing Disk Arbitration ...
| 11:39:16 AM | Info | ......COMMAND => Verifying that permissions are enabled for Untitled 1
| 11:39:16 AM | Info | Permissions on '/Volumes/Untitled 1' are enabled.
| 11:39:16 AM | Info | ......COMMAND => Verifying that Untitled 1 ACL support matches VelociRaptor 1
| 11:39:16 AM | Info | ...ACTION: Preserving Spotlight state on Untitled 1
| 11:39:16 AM | Info | ......COMMAND => Disabling Spotlight search indexing on Untitled 1
| 11:39:16 AM | Info | PHASE: 2. Copy Files
| 11:39:16 AM | Info | ...ACTION: Copying files from VelociRaptor 1 to Untitled 1 using Smart Update
| 11:39:16 AM | Info | ......COMMAND => Cloning VelociRaptor 1 to Untitled 1
| 11:39:16 AM | Info | Copying copy files with delete using script: /Users/williamtanner/Library/Application Support/SuperDuper!/Copy Scripts/Standard Scripts/Backup - all files.dset
| 11:39:16 AM | Info | Loading 27 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude system temporary files.dset
| 11:39:16 AM | Info | Loading 6 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude system cache files.dset
| 11:39:16 AM | Info | Loading 1 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude Norton FileSaver files.dset
| 11:39:16 AM | Info | Loading 2 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude Google Desktop Index files.dset
| 11:39:16 AM | Info | Loading 1 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude iTunes Temporary files.dset
| 11:39:16 AM | Info | Loading 0 commands from copy script /Users/williamtanner/Library/Application Support/SuperDuper!/Copy Scripts/Standard Scripts/Backup - all files.dset
| 11:39:20 AM | Info | /
| 11:39:20 AM | Info | /.vol
| 11:39:20 AM | Info | Ignoring /.vol
| 11:39:20 AM | Info | /cores
| 11:39:20 AM | Info | /Network
| 11:39:20 AM | Info | /.Spotlight-V100
| 11:39:20 AM | Info | Preserving /.Spotlight-V100
| 11:39:20 AM | Info | /private
| 11:39:20 AM | Info | Ignoring /private/var/folders/-S
| 11:39:20 AM | Info | Ignoring /private/var/folders/zz
| 11:39:20 AM | Info | Ignoring /private/var/tmp/com.epson.epw
| 11:39:20 AM | Info | Ignoring /private/var/tmp/com.apple.speech.synthesis.globals
| 11:39:20 AM | Info | Ignoring /private/var/tmp/launchd
| 11:39:20 AM | Info | Ignoring /private/var/tmp/com.WD.WDDriveManagerService
| 11:39:23 AM | Info | Ignoring /private/var/vm/swapfile0
| 11:39:23 AM | Info | Ignoring /private/var/run/vpncontrol.sock
| 11:39:23 AM | Info | Ignoring /private/var/run/usbmuxd
| 11:39:23 AM | Info | Ignoring /private/var/run/syslog.pid
| 11:39:23 AM | Info | Ignoring /private/var/run/syslog
| 11:39:23 AM | Info | Ignoring /private/var/run/printtool
| 11:39:23 AM | Info | Ignoring /private/var/run/portmap.socket
| 11:39:23 AM | Info | Ignoring /private/var/run/mDNSResponder
| 11:39:23 AM | Info | Ignoring /private/var/run/cupsd
| 11:39:23 AM | Info | Ignoring /private/var/run/com.apple.ActivityMonitor.socket
| 11:39:23 AM | Info | Ignoring /private/var/run/asl_input
| 11:39:23 AM | Info | Ignoring /private/var/run/SCHelper
| 11:39:23 AM | Info | Ignoring /private/var/run/diskarbitrationd.pid
| 11:39:23 AM | Info | Ignoring /private/var/run/configd.pid
| 11:39:23 AM | Info | Ignoring /private/var/run/DirectoryService.pid
| 11:39:23 AM | Info | Ignoring /private/var/run/.DSRunningSP1
| 11:39:23 AM | Info | Ignoring /private/var/run/automount.initialized
| 11:39:23 AM | Info | Ignoring /private/var/run/mds.pid
| 11:39:23 AM | Info | Ignoring /private/var/run/com.apple.loginwindow.didRunThisBoot
| 11:39:23 AM | Info | Ignoring /private/var/run/pppconfd
| 11:39:23 AM | Info | Ignoring /private/var/run/resolv.conf
| 11:39:23 AM | Info | Ignoring /private/var/run/sntp.log
| 11:39:23 AM | Info | Ignoring /private/var/run/ntpd.pid
| 11:39:23 AM | Info | Ignoring /private/var/run/utmpx
| 11:39:23 AM | Info | Ignoring /private/var/run/mds
| 11:39:32 AM | Info | Ignoring /private/var/db/BootCache.playlist
| 11:39:32 AM | Info | Ignoring /private/var/db/volinfo.database
| 11:39:32 AM | Info | Ignoring /private/tmp/MobileDevice.log
| 11:39:32 AM | Info | Ignoring /private/tmp/launchd-99.KTlnYd
| 11:39:32 AM | Info | Ignoring /private/tmp/launch-TIwnDn
| 11:39:32 AM | Info | Ignoring /private/tmp/launch-S6asBo
| 11:39:32 AM | Info | Ignoring /private/tmp/launch-1v6MDi
| 11:39:32 AM | Info | Ignoring /private/tmp/icssuis501
| 11:39:32 AM | Info | Ignoring /private/tmp/4b3745a3d4d81
| 11:39:32 AM | Info | Ignoring /private/tmp/target221.indexState
| 11:39:32 AM | Info | /Users
| 11:39:36 AM | Info | Ignoring /.hotfiles.btree
| 11:39:36 AM | Info | /bin
| 11:39:36 AM | Info | /sbin
| 11:39:36 AM | Info | /usr
| 11:39:48 AM | Info | /System
| 11:41:47 AM | Info | /Library
| 11:42:41 AM | Info | /Applications
| 11:44:22 AM | Info | /.Trashes
| 11:44:22 AM | Info | /.fseventsd
| 11:44:22 AM | Info | Preserving /.fseventsd
| 11:44:22 AM | Info | /dev
| 11:44:22 AM | Info | /net
| 11:44:22 AM | Info | /home
| 11:44:22 AM | Info | /Volumes
| 11:44:22 AM | Info | Ignoring /Volumes/My Book
| 11:44:22 AM | Info | Ignoring /Volumes/VelociRaptor 3
| 11:44:22 AM | Info | Ignoring /Volumes/VelociRaptor 4
| 11:44:22 AM | Info | Ignoring /Volumes/VelociRaptor 2
| 11:44:22 AM | Info | Ignoring /Volumes/VelociRaptor 1
| 11:44:22 AM | Info | Ignoring /Volumes/Untitled 1
| 11:44:22 AM | Info | Evaluated 685438 items occupying 29.45 GB (164606 directories, 511269 files, 9563 symlinks)
| 11:44:22 AM | Info | Copied 463 items totaling 0.69 GB (117 directories, 335 files, 11 symlinks)
| 11:44:22 AM | Info | Cloned 29.15 GB of data in 306 seconds at an effective transfer rate of 95.25 MB/s
| 11:44:22 AM | Info | ......COMMAND => Resetting Custom Icon bit on Untitled 1
| 11:44:22 AM | Info | PHASE: 3. After Successful Copy
| 11:44:22 AM | Info | ...ACTION: Making Untitled 1 bootable
| 11:44:22 AM | Info | ......COMMAND => Blessing OS X System Folder
| 11:44:23 AM | Info | Successfully blessed Mac OS X folder on Untitled 1
| 11:44:23 AM | Info | ......COMMAND => Blessing OS 9 System Folder
| 11:44:23 AM | Info | Did not bless Mac OS 9 System Folder on Untitled 1 because it does not exist.
| 11:44:23 AM | Info | ...ACTION: Updating prebinding on Untitled 1
| 11:44:23 AM | Info | ......COMMAND => Updating boot cache on '/Volumes/Untitled 1'
| 11:44:30 AM | Info | updatedyld_sharedcache[271] current i386 cache file invalid because /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv has changed
| 11:44:34 AM | Info | updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/Resources/MetadataLib.dy lib for /usr/lib/libgcc_s.1.dylib
| 11:44:34 AM | Info | updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera for /usr/lib/libgcc_s.1.dylib
| 11:44:38 AM | Info | updatedyld_sharedcache[271] current ppc cache file invalid because /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv has changed
| 11:44:41 AM | Info | updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/Resources/MetadataLib.dy lib for /usr/lib/libgcc_s.1.dylib
| 11:44:41 AM | Info | updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera for /usr/lib/libgcc_s.1.dylib
| 11:44:45 AM | Info | updatedyld_sharedcache[271] current x86_64 cache file invalid because /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv has changed
| 11:44:48 AM | Info | updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera for /usr/lib/libgcc_s.1.dylib
| 11:44:48 AM | Info | updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/Resources/MetadataLib.dy lib for /usr/lib/libgcc_s.1.dylib
| 11:44:52 AM | Info | Successfully updated boot cache on Untitled 1
| 11:44:52 AM | Info | ...ACTION: Restoring Spotlight state on Untitled 1
| 11:44:52 AM | Info | ......COMMAND => Restoring Spotlight search indexing state on Untitled 1
| 11:44:53 AM | Info | /Volumes/Untitled 1:
| 11:44:53 AM | Info | Indexing enabled.
| 11:44:53 AM | Info | Indexing enabled on Untitled 1
| 11:44:53 AM | Info | Copy complete.
"Maybe turn the MP off, pull the power cord and disconnect all external devices but keyboard and mouse, disconnct the SSD, reconnect and start MP":-
I have tried this several times without any success.
"Also, make sure no programs are running during cloning, and leave the computer alone.":-
SuperDuper was the only program running when I cloned firstly to the Mac (WD) HDD, and secondly to the Agility EX on 21st. December.
Also everything was disconnected before I removed and transferred the Mac HDD to an external enclosure.
After I had checked that the Mac HDD had been cloned successfully, everything was disconnected again before I fitted the Agility Ex and the other 3 VelociRaptors in the lower optical drive bay, and drive bays 2,3 & 4 respectively.
I used a Lindy anti-static Service Kit throughout the whole process. I purchased this originally for when I installed 16GB of Kingston RAM, an ATI Radeon HD4870, and my first VelociRaptor

Request for developers to include the Dell Quadro FX 3450 in their beta linux flashplayer for 10.1

request for developers to include the Dell Quadro FX 3450 in their beta linux flashplayer for 10.1. i'm guessing it wouldn't be hard to do. its the same chip that is used in the Nvidia Geforce 6800. It has NV42GL core processor. please don't leave this device behind, any acceleration that can be done to the existing flash player would definitely count, as great.
thank you

Hi it turns out that the SVN version is the most up to date which does not need to be patched as it has the right version numbers. I have created a new PKGBUILD.
# Maintainer: kso <keansum AT gmail DOT com>
pkgname=freechart-svn
pkgver=r3169
pkgrel=1
pkgdesc="Free powerful charting library based on wxWidgets."
arch=('x86_64' 'i686')
url="http://wxcode.sourceforge.net/components/freechart/"
license=('custom:"wxWindows"')
depends=('wxgtk')
makedepends=('subversion')
source=('svn+http://svn.code.sf.net/p/wxcode/code/trunk/wxCode/components/freechart/')
md5sums=('SKIP')
_svntrunk=http://svn.code.sf.net/p/wxcode/code/trunk/wxCode/components/freechart/
_svnmod=freechart
pkgver() {
cd "$_svnmod"
local ver="$(svnversion)"
printf "r%s" "${ver//[[:alpha:]]}"
build() {
cd "$srcdir"
msg "Connecting to SVN server...."
if [[ -d "$_svnmod/.svn" ]]; then
(cd "$_svnmod" && svn up -r "$pkgver")
else
svn co "$_svntrunk" --config-dir ./ -r "$pkgver" "$_svnmod"
fi
msg "SVN checkout done or server timeout"
msg "Starting build..."
rm -rf "$srcdir/$_svnmod-build"
svn export "$srcdir/$_svnmod" "$srcdir/$_svnmod-build"
cd "$srcdir/$_svnmod-build"
# BUILD HERE
./configure --prefix=/usr
make
package() {
cd "$srcdir/$_svnmod-build"
make DESTDIR="$pkgdir/" install
# install LICENSE
install -D -m644 $srcdir/$_svnmod/license.txt "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
I have uploaded onto the AUR. I have checked using namcap. Please let me know if there are any mistakes. Many thanks!

How to avoid QM status for a newly created ODS Request be a Warning

Hi Experts,
I AM using 3.5
When I Execute my infopackage lo load a complete load data for an ODS, the QM status of the Request is a warning.
The monitor says no problem or warn for the load.
I can manually turn it into green and activate the data but i can not put it all in a process chain c'ause the activation can not be done without the manual turning into green.
Is there any step in the chain that can turn ir into green or a way to set it created in green? In the IP i have the warnings threatment as judged to be succesful...
Thanks!!!

Hi,
If you want to use an ODS object as a data source for another ODS object or InfoCube, you have to make sure that the data is of good quality, and that it is active in the system.
If you choose the main menu path Environment ® Automatic Request Processing, the system automatically sets the quality status to OK after the data has been loaded into the ODS object. This option must be switched on. There is also the option of activating and updating ODS data automatically. Here, data that has been given the quality status OK is transferred from the activation queue into the active data table, and the change log is updated. The data is then updated into the connected data targets.
http://help.sap.com/saphelp_nw04/helpdata/en/fb/0025391d4f000be10000000a114084/frameset.htm
Please do the above , for more clarity please go through the link give . it is nothing to do other than setting quality status ok
Thanks
BVR

How do I use tether with droid ultra, keep getting message to call verizon. Do Verizon charge or have to somehow change my account?

How do I use tether with droid ultra, keep getting message to call verizon. Do Verizon charge or have to somehow change my account?

Verizon Wireless Customer Support wrote:
Hi there JByrd,
Let's take a closer look into this. What plan are you currently on? If you are on the More Everything plan, then you shouldn't have to do anything additional. If you are on the Nationwide plan it is an additional $20 a month for 2 GB of data. Let us know what plan you have. Thanks!
ErinW_VZW
Follow us on Twitter @VZWSupport
Hey Erin how about you confirm to Elector and others that you HAVE to pay for tethering on Nationwide plans and that if you are using a 3rd tethering app to bypass paying you are violating the terms of service. They don't seem to believe me.

HT1476 After update to either iOS 7.0.3 or 7.0.4, my iPhone 4S won't charge. I'm using charger and cable that came with the phone. Nothing else changed.

I'm using charger and cable that came with the phone. Nothing else changed.
I think it was the update the iOS 7.0.4 that I did last night. I woke up this morning with my battery almost drained and the charging function going off and on every few seconds, like it would start charging then disconnect, then reconnect repeatedly.
I've tried restarting the phone and hard restarting the phone several times, but I'm getting really low on battery by now (under 20%).
I've tried cleaning the connector with a little isopropyl alcohol, and blowing it out with compressed air. Though I can't be 100% certain, it's very unlikely my connector died exactly at the same time I was updating my phone. Especially since it appears I'm not the only one with this problem.
And now, after the last hard reset, my phone doesn't even recognize the charger at all, or being connected with the USB cable to my MacBook Pro.
I turned off my phone so when I go to the Apple Store it will power up one last time, but besides that I'm out of ideas.

Just back from Genius Bar and two other people at my table had the same problem. Their 4Ss aren't charging either. One of them had a fried board according to the tech. At least my HW checked out OK. It just won't charge.
The tech tried to tell me that it was because my connector was corroded, which I told him was kind of a weak argument since evidence points to that the update has something to do with it.
They're seeing a lot of these and it looks like they already have a script.
Luckily I had enough juice left to recycle it for like $180, so I picked up a 5S with a new 2 year.
It looked to me like this is going to blow up pretty big. Like class action lawsuit big.
If you have an iPhone 4 or 4S, and you haven't updated it to iOS 7, don't for now. See if a patch comes out that doesn't brick your phone. Or get an induction charger maybe? Don't just update and expect absolutely no problems because too many people are having problems right now.

My iPod touch 4th gen. Won't charge with a enercell charger that I've used since December. It will only charge with the apple USB cord that came with it. And even the takes it about 6 sec. To realize its charging. Help me fix this?

My iPod touch 4th gen. Won't charge with a enercell charger that I've used since December. It will only charge with the apple USB cord that came with it. And even the takes it about 6 sec. To realize its charging. Help me fix this?

Yes, I've been using it for months. And I can charge other devices with it. (my iPhone) but something weird just happened..... I kept on pluging it in the iPod and sometimes it would start to chàrge then sometimes it won't charge. Charges every time with the iPhone though.

HT4623 I used iTunes to update my 4s which is now frozen. Picture shows the charger cord with an arrow to the iTunes logo. Computer won't even recognize that my phone is plugged in. I have tried the hard boot. Nothing works...

Please help with my iPhone 4s. I updated to OS 8 using iTunes. It had an error and no my phone is frozen. It shows the pic of the charger with an arrow pointing to the iTunes logo. I have tried a hard boot. I plug it into iTunes. My computer won't even acknowledge it is plugged in. Any tips???

Sounds like it is time to call Apple and make an appointment to take it in for them to examine it and find out what is wrong with it.

Can I use a 5v 1000mA charger with the 700?

I have a usb car charger that outputs 5v and 1000mA. I think it came with an older Nokia but I am not sure. Is it safe to use this with my 700?

@Nokosaurus
Use a Nokia AC-10X with my 700 which outputs 1200mA with no issues.
Happy to have helped forum with a Support Ratio = 42.5

Can i use a 85 watt charger with a new macbook air

Can i use a 85 watt charger with a new macbook air that comes with a 45 watt charger. One says its 14.8 volts and the other is 20 volts.

To be clear, the wattage of the adapter is not the power delivered to the Mac, but rather the power the adapter is capable of delivering.
Think of it as the difference between a 200 HP and a 400 HP engine; both can drive at a certain speed with no issues, the difference is what happens if you floor the gas pedal.
The same is true between the higher wattage power adapter that comes with the iPad and the one that comes with iPhones; you can use the higher wattage adapter to charge and iPhone with no issue, but if you try and use the iPhone adapter to charge the iPad it may work, but it will take much, much longer.

Request for sample reports developed using report designer

Hi All,
Request for sample reports developed using report designer.
Thanks

Ramesh,
right now there really is no way to solve what you are looking for. There partial solutions, but you will not be able to force a page break in a dynamic report.
Here is what I have faced, and what I have come up with so far:
I have a series of reports that have the same column heading, but spread over 5 pages in a fixed structure. I need to be able to re-use the header and the general report design with 6 reports. Here is my solution:
1. Create an outline of the report. I did all the formatting by creating a report section for each page. You can force page breaks between the pages. Upgrade to patch 1502 (came out last week) and you will see some new functionality (such as fit to page, page numbers, etc).
2. Insert all you page breaks and do all the formatting.
3. Insert an infoprovider. Once in, you can just drag and drop the key figure cells into your formatted report.
4. Create additional modification for formatting as needed.
This fixes my problem (for now), but I had to do a lot of work to come up with this. Also, the latest patch (1501 and 1502) has created an issue for me - there is a null exception when I try to use a variable or a filter value in the report body - I can't save the report. I have an OSS message out, but our BASIS guys are going to be taking the lead on troubleshooting this.
The reason that you are seeing some customers on the new pages is probably because of "how the cookie falls" - they just fit that way.
I am trying to be positive and overcome the limitations that are in place right now. If my technical issue is solved, I would recommend upgrading to the new patch (1403 is the latest stable one in my opinion)
good luck
Pavel

Has anyone gone to Europe from US and used the IPAD charger with only a plug adadpter and had no problems?

Has anyone gone to Europe from the US and used the IPAD charger with only a plug adapter? I want to be sure I won't burn up my IPAD.

Just using an adapter will be fine. The charger can handle to 220V just as well as the 110V

I have an Anker Astro 3 charger with a 9V and a 12V setting. Which should I use to recharge my new Ipad (3)?

I have an Anker Astro 3 charger with a 9V and a 12V setting. Which setting should I use for my new (3) Ipad?

Hi there,
You use only the 5 volt USB ports. Not the 9 volt and Not the 12 volt one either. The voltage must be 5 volts. 9&12 volt ports will damage your device. Below is a link to the Anker Astro 3. Check out the link. Take a look at the first picture of the Anker Astro 3. It's the photo that shows two USB ports to the left of center of the battery. Anker always labels its ports. The ones I have are labeled on the back of the battery where each port is. The product description says that there are 2 5 volt USB ports for a total output of 2 amps. So you would use one of those for your IPad 3. Hope this helps you.
http://www.amazon.com/Anker%C2%AE-Astro3-10000mAh-Multi-voltage-output/dp/B005NG KR54/ref=sr_1_1?ie=UTF8&qid=1361603389&sr=8-1&keywords=Anker+astro+3
And here is the product description,
Product Features
Huge Capacity, 10000mAh / 3.7V; 4-5 full charges or add 40 hours of talk time to your iPhone 5 / 4S / 4G / 3GS, 3-4 full charges for Samsung Galaxy S3, a full charge for iPad / iPad 2 / Samsung Galaxy Tablets, or 400%+ to most mobile phones' battery life. Also able to charge higher 9V / 12 V devices including netbooks, tablets, digital cameras, DV recorders, PSP, NDS, NDSL
Multi-voltage supports most your mobile devices: Dual 5V 2A USB ports for most smartphones, charge one device with up to 2A output, or dual devices at 2A total max. In addition, 2 voltage options of 9V and 12V can charge your SLR camera, netbook, etc; LED indicates charge level
Portable & stylish design; Easily fits into your bag to provide instant power; PERFECT for long plane flights, road trips, or whenever you need to charge your mobile devices wherever you are
Reliable Lithium Polymer battery ensures high quality; 500+ recharge cycles over the life of the battery
Package includes: Anker External Battery / 12 connectors for most phones / 6 tablet connectors / 1 UL-listed AC adapter / 1 DC power wire / 1 USB spring power wire / 1 convenient travel pouch
› See more product details
Cheers!

Immediate Request to developers: WARN TO USE CHARGER with update !

Similar Messages

Maybe you are looking for