IMovie 08 minor problem, hovering on "Done" while capturing from a camera..

In iMovie 7.0.1, when I am capturing from a camcorder, when I hover over "Stop", it shows "Click here to begin recording" instead of "Click here to stop...". The same is with when I am capturing with the iSight camera, it shows "Click to begin recording". This is a minor problem, but might confuse some computer illiterate folk and should be fixed in the next update.

Thanks, I'll pass that along.
If she's upgraded her OS or QT beyond this point, which she's probably done -- in all innocence -- then to get it to work, she'd have to re-install earlier versions of both OS X and QT? Or buy a new, considerably more expensive version of FCP?
Wow! That's a bummer.
Hal

Similar Messages

Is it Possible to Mark Chapter while capturing from camera?

While capturing from camera there are incidents (like obvious mis-speaks, etc.)that I would like to mark during the shoot when they happen to facilitate finding them while editing.
Is this possible to enter a chapter marker or something during live capture?
Open to any other suggestions.
Thank you.
I am using FCP 7.0.3.

After about a year of manually noting the time code and notes, I finally found a solution to the problem of marking chapters during a live shoot.
Final Cut Pro X will not allow you to mark a file while capturing it, probably because it does not actually change the raw file. However I just found a piece of software that will do the trick nicely. It is called Cut Notes. The only catch is that you must have an iPad to run it.
You can purchase it from digital rebellion for $9.99 at
http://www.digitalrebellion.com/cutnotes/
You start Cut Notes at the same time that you begin to capture, and it will start a timeline, identical to the one in FCP. Then for every edit point, you simply tap a key to insert the timecode along with either a pre-determined note or manually entered note as to the event. For example I have a note key that says MisSpeak, the opertator just taps it when I mis speak and it saves the time code and the MisSpeak title into a text file. I have another note key same for "walked off screen." You can Edit any number of note keys you may need. Then when finished, Cut Notes will email the file to your computer, simply import it to FCP as chapters using a free utility available at the same website. Awesome!!!
The only caveat is that you must import the file with markers before you do any editing to the project in FCP.
Hope this is helpful.
jac

Is it possible to monitor audio through my mac while capturing from a tape in FCPX

Is it possible to monitor audio through my mac while capturing from a tape in FCPX?

I am sure that as you import a tape you will hear the audio as well as see the video.
Have you got FCP X?
If not, download the free 30 day trial.
http://www.apple.com/finalcutpro/trial/

How do I get photos from the iPhoto import folder to the iPhoto library? It uploaded, but hung while deleting from my camera, so no imported photos are in the iPhoto library.

How do I get photos from the iPhoto import folder to the iPhoto library? It uploaded, but hung while deleting from my camera, so no imported photos are in the iPhoto library. I watched it upload about 400 photos, one by one. They're somewhere, but they don't appear in the iPhoto library. As iPhoto was deleting them from my camera, it got hung up, then a message came "you should eject before disconnecting a device." I hadn't touched the camera. The message came by itself. I couldn't get iPhoto to respond, so I disconnected the camera and did a Force Quit. Opening it back up, the pictures were gone. Can somebody help me?

What version of iPhoto are you running? Assuming it's iPhoto 9 or later Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

GF4-TI4200VTD8X capturing from analog camera

I have got a problem to capture from analog Sony Hi8 video camera. I have used the video in on TI4200 and the winproducer/wincoder program. But I could not see my camera image and the video files in the program. How can I capture from analog camera (Video in socket)? I have already installed Ndivia capture driver. Please help me. Thanks. My e-mail address is [email protected] ?

Hi,
I have exactly the same problem.
I installed all the latest drivers both from nvidia and msi, the the card (gf4-ti4200vdtX8) works with no problems, but I dont have any input device in the IniputSources folder in the WinProducer program.... (i am connecting an anlog camcorder) why??
Thanks in advance.

IPad 2 - iMovie - will not display any videos or pics from my camera roll.

iMovie won't display any vids or pics from my camera roll. All the vids are taken using the iPad. Help?

Probably a privacy issue.
Check your privacy settings.
On the iPad, click SETTINGS
then PRIVACY
then PHOTOS
Look for iMovie and turn it ON

HT1338 why I can't do capture from the camera in final cut pro x?

why I can't do capture from the camera in final cut pro x?

why I can't do capture from the camera in final cut pro x?

Problem erasing MacBook drive while booted from external drive

Hello,
I'm booted on a MacBook Pro from an external drive, and I want to erase the drive inside the MacBook using Disk Utility from the external. For some reason or another, it won't let me do this.
When I click on the Erase tab (whether clicked on the disk itself or the volume "Macintosh HD") and try to erase it, it returns with the error:
Disk Erase failed
Disk Erase failed with the error:
Could not unmount disk.
When I try to install an image onto the drive, I get a similar error, except it says "Operation not permitted."
When I tried it while booted with an OS X DVD, it worked fine.
As far as I know, I should be able to do this while booted from the external HD.
Any solutions to this problem?
Thanks,
Jason

Hello Jason and welcome to the discussions. You could try to re-partition the internal drive while booted from the external. Using disk utility from the externals Application/Utilities folder click on the internal drive (the manufacturers #, should be above the internal name) and select the partition tab.
change the partition table and then restore it back to the original. This will wipe out all the partitions and should show the drive as empty. Then I would erase all the free space using the erase tab and selecting your Macintosh HD or whatever you named your new internal startup drive the click on the "erase free space" button. Select "zero out deleted files" then erase. It will warn you that the drive is full when it gets near the end...thats okay just click to ignore or proceed. That should do it.
Cheers,
Glynn

Error while capturing photo by camera

I am developing an Windows Store App in WP8.1. I need to take photo through camera and save it and use it for showing but it throws exception everytime.
Link to my project is Link to my project
My code is--
async private void capturePhoto_Tapped(object sender, TappedRoutedEventArgs e)
try
MediaCapture mediaCapture = new MediaCapture();
StorageFile sf = await ApplicationData.Current.LocalFolder.CreateFileAsync("My Picture", CreationCollisionOption.GenerateUniqueName);
ImageEncodingProperties img = new ImageEncodingProperties();
await mediaCapture.CapturePhotoToStorageFileAsync(img, sf);
catch
It throws an exception Object must be initailized and if I use InitalizeAsync it shows System.Exception and message is Text related to the Exception could not be found.If I use this code
private static async Task<DeviceInformation> GetCameraID(Windows.Devices.Enumeration.Panel desired)
DeviceInformation deviceID = (await DeviceInformation.FindAllAsync(DeviceClass.VideoCapture))
.FirstOrDefault(x => x.EnclosureLocation != null && x.EnclosureLocation.Panel == desired);
if (deviceID != null) return deviceID;
else throw new Exception(string.Format("Camera of type {0} doesn't exist.", desired));
async private void InitCamera_Click(object sender, RoutedEventArgs e)
var cameraID = await GetCameraID(Windows.Devices.Enumeration.Panel.Back);
var captureManager = new MediaCapture();
await captureManager.InitializeAsync(new MediaCaptureInitializationSettings
StreamingCaptureMode = StreamingCaptureMode.Video,
PhotoCaptureSource = PhotoCaptureSource.Photo,
AudioDeviceId = string.Empty,
VideoDeviceId = cameraID.Id
StorageFile sf = await ApplicationData.Current.LocalFolder.CreateFileAsync("My Picture", CreationCollisionOption.GenerateUniqueName);
ImageEncodingProperties img = new ImageEncodingProperties();
await captureManager.CapturePhotoToStorageFileAsync(img, sf);
I found the error ------ The requested attribute was not found. (Exception from HRESULT: 0xC00D36E6)--
Can anybody help? I just need to capture photo using camera and save it for use

Hello,
This is a very generic error and the cause depends on the API call that is generating the error. What API is causing the error?
If I remember correctly photo mode and video streaming mode are mutually exclusive. Try setting the PhotoCaptureSource to VideoPreview.
I hope this helps,
James
Windows SDK Technologies - Microsoft Developer Services - http://blogs.msdn.com/mediasdkstuff/

IPhoto shuts down while uploading from my camera

I have loaded pics from that camera before. Now, shuts down while uploading. So, I closed Iphoto and tried again. Same. Checked for updates. I opened Iphoto without the camera attached and it wants to upload the same pics. I try, and it quits.
On a side note, Last night I could not print. It did not see the printer. Checked the printer with a PC. Works like a champ.
Thanks,
Bud

Bud,
Welcome to the Apple Discussions.
Look just inside your Home/ Pictures/ iPhoto Library folder for a folder named "Importing." If you see it, drag it out to the desktop. Launch iPhoto and see if that clears up the attempt to import. Use the Finder to look inside the Importing folder - if it has files you need in your library you can go ahead and import them.
Warning: Do not make any other changes to the items inside the iPhoto Library folder from the Finder, as damage to your library can result. If you don't see an "Importing" folder, then leave everything alone and report back.
Regards.

Encoding DV to ProRes 422 while capture from camera

Is It possible to capture a DV tape encoding with ProRess 444?

but if you're trying to integrate DV into a project that is already predominantly made up of ProRes footage, whether it's from DigiBeta or HDCAM, it would decrease render times.
Not by much. I'd opt for the minimal rendering over the file size that would happen with the change in data rate.
Don't we always preach to have all your footage in the same codec whenever possible?
There are exceptions.
Shane

Problem regarding offset length while upgrading from 4.7 to ECC 6.0

Hello Friends,
We are upgrading our system from 4.7 to ECC 6.0, during the this I have come across one problem in custom program. Program is not syntactically correct. It's giving error at write statment. WRITE : W_LFA1 +3(1429) to T_FILE. W_LFA1 is having of type LFA1. Error is "The sum of the offset and length (=1432) exceeds the length of the start (=1232) of the structure." Can anyone guide me in this.

Hi Chetan,
This should be an unicode error.
Try to replace your write statement by WRITE : W_LFA1 3(1429) to T_FILE and see.
Regards
Sayee

Problem in getting object while shifting from java1.4 to java1.6!!

hi all, i stored my object in file using serialization in java1.4. now i am shifting to java1.6 and when i am reteriving the object, i am getting the exception
java.io.InvalidClassException:data.SessionDVO; local class imcompatible; stream classdesc serialVersionID= -78952647 .... , local class serialVersionID= 45628....
This is the version id error. One solution is to define the class versionID in SessionDVO class which static and final, so cant be changed at runtime. but since i didnt define it earlier in SessionDVO class , so while reteriving the object , i am getting this error.
Can anyone help me in this case???
below is the code which im using for reteriving the object
                                        FileInputStream fis = new FileInputStream(filePath);
                                        ObjectInputStream in = new ObjectInputStream(fis);
                                        SessionDVO session = (SessionDVO)in.readObject();

hi dear on windows when i am using Mac serialVersionID it gives me this error
java.io.InvalidClassException: data.SessionDVO; local class incompatible: stream classdesc serialVersionUID = 4640646385536229406, local class serialVersionUID = -3687353918251388251
private static final long serialVersionUID = 4640646385536229406L;
when i change versionID to this versionID on windows it shows me error
    java.io.InvalidClassException: javax.swing.text.AbstractDocument; local class incompatible: stream classdesc       serialVersionUID = -116069779446114664, local class serialVersionUID = 6842927725919637215when i use versionId below one
private static final long serialVersionUID = -116069779446114664L;
then it shows me this error
java.io.InvalidClassException: data.SessionDVO; local class incompatible: stream classdesc serialVersionUID = 4640646385536229406, local class serialVersionUID = -116069779446114664now i am confused which i should use here???

Problems of Port Configuration while upgrading from 4.0B to ERP 6

Hi all,
We are upgrading a system from 4.0B to ERP 6. Will there will be any problems from port configuration side? If any please tell what they might be.
thankyou.

Hello,
We have upgraded from 4.6C to ECC6.0 and did not have any port config issues.
Things to look for:
- RFC destinations, do they still work
- directories used in File type ports, are they still there (they should be)
Hope this helps a bit
Regards
Greg Kern

Problem with sap script while transporting from dev to quality server

Hi experts,
In dev server i am getting correct output in sap script.But when it is transporting to quality server alignment is different.Printer name is same both in dev and quality.Please give an answer for this query.
Thanks
suresh

Hi Suresh,
This could be a problem with the Sapscript buffers. Try running the report RSTXDELL on the system to clear the Sapscript buffers?
To do this you can use RSTXDELL report with default settings except it is better to have * instead of the current client number in the Client field.
After this, create a new spool and see if the problem is resolved?
Regards,
Aidan

IMovie 08 minor problem, hovering on "Done" while capturing from a camera..

Similar Messages

Maybe you are looking for