IMovie 08 slowing down

Subject: I movie slowing down
G5 Imac @ GHZ PowerPC
1.5 GB DDR SDRAM
Hard Drive 234 GB 125 available
Leopard 10.5.1
Imovie ‘08 7.1(506)
Help! This is becoming a big deal in my life when I expect to have time to edit and things just slow down so I can’t work on my projects. I may have to go back to Final Cut Express, but I like the promise of quick and easy editing.
I did import and edit a 2 minute tape a few weeks ago and was successful. Now I can’t seem to do another project.
iMovie 08 seems to have a tough time playing back video, importing video, making edits, when i hit a button it seems to take a few seconds to react.
I have run disc permissions, I have switched to thousands of colors vs. millions.
Help?
Todd

You can't do it within iMovie 08, but you can using external (free) software.
Details are here:
http://karsten.schluter.googlepages.com/slowmowithim08
Karsten is a major contributor to these discussion groups

Similar Messages

  • Imovie slows down then freezes while importing from camera

    I am trying to import a movie from my canon hv10. I've never had problem the last 2 movies I did. but this time around it starts importing, and a few clips later, slows down to 1/8th time. then freezes. The camera is still playing but it has stopped importing. I have tried to pause it to let it catch up. Restarting it numerous times. It is being imported into my 500 GB hard drive. I have 400 GB available. It's worked before in HD. Any ideas? anything would be helpful, I've searched every single message board so far. thanks.

    I had a smilar problem. it came up when I changed OS to Leopard OS X 10.5.
    My Imovie HD 5 had been working fine until then under earlier OS versions, both in LP as well as in normal mode. Then all of a sudden importing stopped eery few seconds.
    I checked many discussions in this forum and tried a lot of suggested solutions, to no avail. I have now come to realise that Leopard is the problem, not the camera, the cable, or preferences or good old iMovie HD.
    I simply went back to an older laptop (iBook) running OS 10.3.9 and iMovie 3 . No problem whatsoever importing clips (just had to start a new project about every 20 minutes of clip import). Then attached my external harddrive via firewire, copied the projects to the Hard Disk and then opened them with iMovie HD 5 and bingo: the project was OK and could be further worked on.
    So that does not solve the basic problem, but is not too complicated as workaround.

  • Imovie - slowing down and speeding up videos?

    Hi, i have the latest imovie and i'm having difficulty knowing how to speed my videos up and slow them down. I can't find the option to do that. On the older version of imovie, i clicked ' media '
    but the one i got from ilife..i'm just not sure.
    Anybody know?

    Bengt Wärleby wrote:
    ... Always a better way of doing it.
    .. hmm, well.. nor sure about that 'better'.. I'm receiving a lot of 'help' mails esp, for that advice.. that JESDI app is a beast, and some people fail to mangle it
    but, IF you manage to use it, the results are superb due to the pro-feature of 'frame blending', I excessively use it now for all my soccer-videos.. the iMovie slowmo often fails to avoid stutter on final DVDs.. with JESDI, I feel like a broadcast director

  • IMovie slowing down and stops

    Hi there,
    I've got a strange problem and i could not find anything on the web.
    I'm working with iMovie for over a year with no problems.
    Recently I wanted to edit a (already capured) project.
    If I press the start button, the movie starts running but not smoothly.
    After a while (or when I use the slider) the movie goes into a slow motion and stops.
    It's like pulling out the plug of a film machine.
    The sound is playing on normal speed for about three seconds en then stops.
    I've had this problem with OSX 10.3.9 and with the new 10.4.5 version.
    The captured movies and projects are stored on a external firewire hard drive (Maxtor one touch 160Gb firewire/USB 2.0)
    I've tried to operate this disc on the USB 2.0 port but the problem does not go away.
    I also installed the firewire update driver from Maxtor but with no succes.
    My system works perfectly with all other applications including Logic pro
    There is enough memory installed and the system is "heavy" enough (dual 1.8 G5 with more than 1 Gb memory)
    I hope someone knows a solution for this problem
    Greetings,
    Richard

    Thanks for the quick replies on my question.
    Well, My internal hard drive is only 80Gb!
    That's why I bought a 160Gb External.
    Until January iMovie worked fine with this configuration.
    I don't have so much expierience with Apple, but with PC's it was often a conflict with other programs.
    Can this be the problem with my Almighty Apple??
    Perhaps it's because I've installed Adobe CS1?
    (adobe can cause lots of problems and errors in a PC enviroment)
    The transfer rate of the External hard drive isn't the cause because Logic pro runs perfectly good.
    And with multitrack audio you absolutely need a high transfer rate.

  • Is there a way to speed up or slow down video clips in iMovie using the iPad?

    Is there a way to speed up or slow down video clips using iMovie on the iPad? I do not have an Apple computer...just the iPad.

    No.
    There are other apps that can to time shifting, or speed effects.
    iMovie cannot.

  • Does using an external HD slow down iMovie?

    I have stored about 6000 photos on my hard drive. I believe it may be slowing down my computer, so I have thought about buying a separate drive just for iPhoto and iMovie. Would that be a good idea? If so, would I expect the program to run more slowly when working from this external drive? It was suggested to me that I buy the NewerTech ministack V2. That drive is available in a number of sizes. Should I select 320, 400, or 500GB, if I buy that one? Do you have other suggestions? Thanks for any advice you can offer. I am not a techie, I just like to make movies. Miriam

    It seems that you're sensibly thinking ahead, and preparing for any trouble!
    The external disc(s) wouldn't normally be backed up to .Mac, but if you copy your iPhoto Library and Movies to another destination - as well as to the disc you'll normally keep them on - then you should be well covered.
    Your Mercury On the Go drive is probably quite small (60GB or 80GB), so why not use that for your iPhoto Library?
    I've got 11,000 photos in my Library, and it uses up 33GB. So you could easily fit your 6,000 photos on your On The Go drive. Moving your iPhoto Library onto that external disc would clear, say, 16GB or so from your internal disc; enough for another hour's worth of DV video editing.
    Then you could use a larger capacity external FireWire disc for backups - instead of the On The Go ..and backups would probably run faster - and you could also edit movies on that fast disc, as long as you kept a backup of them on another disc!
    Editing movies which are on an external fast FireWire disc generally allows things to run faster, as the internal disc can simultaneously do its own 'housekeeping' duties, or swapping things in and out of memory, or reading bits of program from the internal disc ..while all video data transfers happen exclusively on the external disc.
    That's the way professionals edit: always keeping video files on a fast external - or second internal - disc.
    The only problem which comes to mind is that some Canon camcorders don't like to be on the FireWire circuit along with any other FW device, such as a separate external disc. If you do have a Canon camcorder, you may need to import to your Mac's internal disc first, then disconnect the Canon camcorder and then copy that imported video to your external disc for editing.
    But it's late here, and I gotta go to bed ..bye for now!

  • Can't Fast Forward/Slow down in iMovie

    I have the new iMovie and i took a video on my laptop with the iSight camera and will not let me speed up. Please help!

    kasia_plus3 wrote:
    I made my movie from still photos, but I hope It doesn't matter?
    Yes, it does matter. The speed controls don't work on still images.
    Instead you want to change the duration of the clip. Select the clip, click the Adjust Button then choose Clip Information (the little "i"). Enter the duration you wish you clip to last.
    Changing the duration effective speeds up or slows down the clip with still images.
    Matt

  • On iMovie for iPad2, is it possible to speed up and slow down voices?

    On iMovie for iPad2, is it possible to speed up and slow down voices? (in order to sound like a chipmunk for example) I know that it can be done on a Mac, but what about iPad?

    It it possible to speed up or slow down music from my iTunes file?
    http://www.bulletsandbones.com/GB/GBFAQ.html#changeimportedtempo
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    cut
    http://www.bulletsandbones.com/GB/GBFAQ.html#cutsection
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    http://www.bulletsandbones.com/GB/GBFAQ.html#cutsectionnospace
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    blend
    open GB's help and search for "curve"
    I am using music from my iTunes.
    http://www.bulletsandbones.com/GB/GBFAQ.html#importfromitunes
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • In iMovie '11 how do I slow down my credits at the end of my movie.  I typed them in, but the speed is too fast.

    I have iMovie '11, and I can't find how to slow down the "credits" I've typed in at the end of my movie.  I guess
    it would be the scrolling speed.

    Credits scroll at the speed that is necessary for the scrolling to complete by the end of the clip.  So, to slow them down, simply prolong the duration of the scrolling credits title clip by selecting and draggging out the yellow boundary.
    Geoff.

  • Chronic slow-down of iMovie functions

    I've used several versions of iMovie over the last few years, now running iMovie 09 version 8.05.
    Nearing the end of my first project, all 23 minutes of it, and the whole app has started to slow down badly, just like in the old days of the first iMovie run on the first iMac with OSX.1.
    So why now is my Quad Core having problems skimming through the opening shots of a 23 minute film? Most of it skims through OK, but the first 3 or 4 mins lock it up for several seconds instead of skimming over as it should.

    yes, same thing has happened to my iMovie '09, just in the past week. I have a MacBook Pro w/ 4GB RAM, tons of HDD space, and have gone through several iMovie restart/OS X reboot cycles. I have also followed the suggestions from other threads including deleting all my cache, deleting the iMovie preferences, rebuilding my iMovie library, and reinstalling iMovie completely.
    But as it stands now, iMovie is almost completely unusable. I get the spinning beachball constantly, I can't skim video, it stutters and hiccups constantly while trying to move clips around. Plus, some of my clips in the event browser don't play in the playback window - i hover over them for preview, hit spacebar and I get audio, but the preview window stays black. When I move the clips into the Project Library, playback works in the preview window.
    As I said, this is a recent thing - w/in the past week. Before then, it was working great. Now, it's unusable.....

  • Why do GarageBand, iMovie, Photobooth, and Hulu and Youtube videos slow down my whole computer?

    I have a higher end 13" MacBook Pro running OSX Snow Leopard 10.6.8 that I purchased in August of 2010. About a month ago, I was using iMovie to edit a project when all of a sudden it started responding extremely slowly. Like, near impossible to work on my project slow. The whole computer was lagging, the mouse was unresponsive and I could barely use the gestures on the trackpad to get to different programs. Eventually the pinwheel of death showed up, and I quit iMovie. As soon as it closed, everything returned to normal. I restarted the computer to see if that would help, but as soon as I opened iMovie again, the whole computer started lagging. I then noticed that the same problem occured when I used GarageBand, iPhoto, Skype, and when I watched Hulu or YouTube videos. With all of these programs/sites, everything is running fine beforehand, but when I open them up, chaos sets in. This problem doesn't occur when I use other intensive programs like Photoshop or Illustrator, nor while I'm browsing the web. The only web problems are when I watch a video. Any video. Other than that, web pages are as quick to load as ever, and I can use the computer normally for any other task. This is seriously a problem because I use iMovie and GarageBand for school a lot, and my grades depend on me being able to use these programs effectively. All of these problems have persisted with these apps since that first instance about a month ago, and no significant changes occurred to instigate them. In attempts to solve the situation, I have cleared my cache, freed up space on my drive (I have 56 free gigs out of 320), I have verified and repaired the disk permissions, and I have downloaded the Apple provided Trojan removal tool for Snow Leopard. This seemed to work for about 10 minutes, but the apps and videos quickly started lagging and slowing down my whole computer again. If anyone else has experienced anything like this, I would love to hear exactly what has happened to you and to see what you did to [try to] fix it. Thanks for reading all of this, I need all the help I can get right now. Also, I can't watch The Daily Show or The Colbert Report on Hulu anymore, and it's killing me! Thanks again.

    It's very difficult to say without knowing more about your system. There are a number of possibilities. First, your 13" lacks a discrete GPU, so the CPU is doing the work that a GPU would have done as far as decoding video streams, etc. Each video stream will consume considerable resources from the machine, and if you have multiple things running with video streams being decoded (for example, a browser with video Flash or cumbersome animation and iMovie running at the same time), then that may be a factor.
    Additionally, it could be that you are memory constrained. You didn't post a picture of the process list from activity monitor or the memory usage stats, but you probably want to look and see what the memory and CPU usage is and who's consuming what. Some applications are pretty inefficient. For example, if you have iPhoto open and have thousands of images, the indexed metadata and thumbnails are all stored in RAM. iMovie pulls in clip thumbnail sets - (and worse, it has to do on-the-fly transcoding video assets from some cameras that don't encode the video using the parameters it expects to make indexing frames easier). Again, this would show up as periodic spikes in CPU activity for the app.
    You seem to have plenty of disk space, that's not likely to be a problem.
    Check if Time Machine is running. Time Machine introduces a performance impact, but it's exacerbated by the presence of frequently changed large files (e.g., you don't want Time Machine backing up your video projects while you are working on them).
    Lastly, you may consider checking the console for error messages. This might reveal background processes that might be bogging down the system, or things like filesystem/disk errors. If there are errors in the filesystem, when you access certain portions of the disk, the OS and applications can slow down or lock-up as a result.

  • New iMovie ?  can not fast forward or slow down clips ??

    Can anyone help me?
    When i try to fast forward or slow down a clip in iMovie i can see the option in "Modify" menu but it does not allow me to select the options

    The clip must first be in a Project before you can speed it up or slow it down.
    You can't modify a clip when it's just in an Event.
    Matt

  • Imovie '8- SPEED UP/SLOW DOWN

    I know that the speed up/slow down option was taken off of imovie '8. My question is, what do I do? I have heard through the grapevine that you can download imovie '6 which does have that editing option, but I can't figure out how to do that? thanks for your time.

    1) Upgrade to iLife 09
    or
    2) A free option is to use JES Deinterlacer. Karsten Schluter has a [tutorial on his excellent web site|http://sites.google.com/site/karstenschluter/slowmowithim08].
    There are no legal free downloads of iMovie 06.

  • Slowing down or expanding a video clip in iMovie for iPhone 4

    Is there a way to expand a short video clip in iMovie for iPhone 4? I can expand a still image, but not a video clip. I would like to take a video clip that lasts 2 seconds and expand it to 15 seconds or longer. The video clip could be slowed down.
    I can do this with still images, so I would think I would be able to do this with video clips. For example, when I insert a still image it defaults to 2 seconds with the ken burns effect. I can then expand or shorten the still image to last as long as I want (from 2 seconds to 10 seconds, for example). However, when I insert a short video clip I am not given that option. When I grab the crop button and try to expand the video clip it stops at the end of the clip.
    Any suggestions?

    Thanks Joe, hopefully Apple adds this feature to iMovie soon.

  • When i try to burn my iMovie to a dvd it does not play correctly. It gets stuck or slows down at parts...please any tips, ideas or help? Thanks

    When I create my movie on iMovie it plays great. Then I try to burn it to a dvd and it doesn't play well on the dvd. It either gets stuck at parts or slows down or skips a little. I try to save it to my theatre and burn it that way. Or I have added it to my documents and burned it that way. Either way worked. Any tips, ideas, help or solutions would be very much appreciated. This is driving me crazy and i am wasting so many dvds! Thanks!

    bertjones00 wrote:
    It reads other DVD's just fine.  I've tried playing commercial DVD's and homemade movies and they all work just fine.  I'm also able to create and read data discs with no problem.   I'm only having trouble playing this one particular DVD movie.   I'm able to play the movie in my PS3 with no problem and can play it in a regular HDMI DVD player.   I'm not sure if my computer doesn't recognize the encoding for the movie or if I need to download another type of software to play the movie.  Someone suggested that i try using PowerDVD to see if it could play the movie. 
    Ok then tell me this what is that DVD your having problem watching then? And what Region Code are you from like Euro is Region 2 and so on??? Could be the Region problem on the DVD doesn't match your drive Region as well?
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Maybe you are looking for

  • How can I disable ALL public access to profile dat...

    I don't know how you Micro-shunts manage to do it, but ever since the forced migration to the Micro-shunt version of the Skype client, it is getting prgressively worse with every iteration. I'd been a very happy Skyper until the enslavement -- sorry,

  • Downloaded up-dated iTunes which crashes at end of iPod touch Sync

    I have a new iPod Touch (ios5) and just downloaded the latest version of iTunes and when I try to Sync the iPod iTunes crashes before it has finished syncing.(It's done this about 3 times). Is it a bug in the new version of iTunes?

  • Smudge tool paints white

    My Smudge tool is acting like a white paint brush, how do I get it to smudge in Photoshop CC?

  • My MacBook Pro cd drive won't work what do I do?

    I had to unplug the cd drive and now I doesn't do anything, like it is not connected to my computer.

  • Sharing in GUI Issues

    This should be fairly simple I hope. I use openbox with thunar and thought it might be a nice idea to use the thunar shares plugin. Installed and followed the instructions on the wiki page to the letter. For some reason when I try to create a share i