IMovie 08 won't import .mov files

I've just installed iLife 08. The only video iMovie 08 will import are ones I have saved saved as movies from the previous version of iMovie. It doesn't seem to recognize any of the .mov files. In addition, I have several .avi files, can they be converted to a file that the program will recognize?

Here is the same! The iMovie 08 wont import .mov files. Even if I made it in the iWork/Keynote with H.264 or MPEG4 codec. You can work with the .avi files , they are opening in iMovie well, and you can edit them also. But not the .mov files. Strange...
Message was edited by: Laximus

Similar Messages

IMovie 09 won't import .mov files

Running iMovie 09 (v8.0.6) under 10.6.5 on MBP 13.
I'm trying to import a couple .mov files from an external hard drive. In the dialog box that results after choosing File:Import:Movies, I can navigate to where the files are, but their names are grayed out so I can't access them.
Any ideas?
BTW, problem does not occur with .mp4 file.

Here is the same! The iMovie 08 wont import .mov files. Even if I made it in the iWork/Keynote with H.264 or MPEG4 codec. You can work with the .avi files , they are opening in iMovie well, and you can edit them also. But not the .mov files. Strange...
Message was edited by: Laximus

IMovie Won't Import MP4 Files

For some reason iMovie '11 won't let me import videos. Specifically, I'm trying to add MP4 files that I copied to my hard drive from my GoPro HD 960. For GoPro users, I used the R2 (720p) format. They open properly in QuickTime and VLC but can't be imported into iMovie (or iPhoto). When I select File-->Import-->Movies and browse to the directory where I saved all the .mp4 files on my hard drive, they're all greyed out. And actually, it seems that just about no video files at all on my computer can be added (all greyed out)--even other MP4 files.
I downloaded MPEG Streamclip but that says "unrecognized file format" when I try opening the videos. I also installed Perian and rebooted.
In case it helps:
- I have an Intel MacBook running OS X 10.6.8 with iLife '11
- QuickTime info for the video format says "H.264, 1280 x 720, Millions; AAC, 2 channels, 48000 Hz"
- VLC says "Stream 0 (Video) - Codec: avc1" and "Stream 1 (Audio) - Codec: mp4a"
Any ideas? This is incredibly frustrating!

Why iMovie Won't Import MP4 Files?
Technically, iMovie does import MP4 video. However, iMovie only import MP4 files that are encoded with MPEG4/AAC or H.264/AAC data. And yet, MP4 is a video container format that may contain various audio and video codec (and sometimes even subtitle streams included). If the MP4 file is not encoded with iMovie support codec, iMovie will refuse to import this kind of MP4 video.
How to Solve Can't Import MP4 into iMovie?
In order to successfully import all kinds of MP4 files to iMovie, a recommended solution is to convert iMovie unrecognized MP4 to iMovie supported video format.
iDealshare VideoGo is just the right MP4 to iMovie Converter which can convert various MP4 to iMovie supported MPEG-4, MPEG-2, MOV or DV. Besides converting MP4 to iMovie, iDealshare VideoGo also helps to convert other video formats including AVI, WMV, MPEG, VOB, MOV, AVCHD, MTS, M2T, M2TS, TOD, MOD, XAVC, FLV, MKV, SWF, 3GP, MVI, ASF and etc to iMovie video format.

Premiere CS6 won't import mov files, the message: "file has no video or audio streams" shows up instead. How can I import the files?

Premiere CS6 won't import mov files, the message: "file has no video or audio streams" shows up instead. How can I import the files?

MOV is a wrapper that can contain many different codecs. The message you get is indicative of a distribution codec inside the MOV wrapper. You may need to convert the material to an editable codec before importing.

How do I rectify the issue that AE (CC) won't import mov files on Windows 8.1. (It's the most current Quicktime).

How do I rectify the issue that AE (CC) won't import mov files on Windows 8.1. (It's the most current Quicktime).

troubleshooting QuickTime errors with After Effects

DVD studio Pro won't import .mov files

My dvd studio pro 4.2.2 from final cut pro 7.0.3 won't import .mov files. Any suggestions?
Thanks,
Chris

Ask this on the Final Cut Studio forum.

LR 5.3 won't import .mov files from iphone 5s

I'm running Mavericks and LR 5.3 and have had trouble importing video files from my iphone 5s. All of my software is up to date. It seems that LR is having trouble connecting to the dynamic link server. It doesn't work even when I disable my firewall. I've already purged my video cache in LR. Is there anything else I should try?

There are many, many posts of this nature in these forums. See, for example:
iphoto won’t import mov video
For many, rebuilding the XPC helper cache solves the problem off the bat. In terminal try this, and reboot:
sudo /usr/libexec/xpchelper --rebuild-cache
The above posted by Andy Ball on a thread related to a similar problem with Aperture:
Re: Import video to Aperture library on Mountain Lion
Other things to try:
1. create a fresh iPhoto library and try that. (hold down opt while launching iPhoto)
2. create a new OS X user (in system preferences) and try there.
In my case – and many cases – neither of those things work either, which means the problem is system wide. Again suggesting that the xpc helper solution might work. But for me it did not either.
There are other suggestions that there are conflicts with Perian (on Yosemite) and flip4mac. In my case uninstalling both of those didn't solve it either.
So maybe one of those solutions will work for you, results apparently vary. But this is a huge unresolved issue many others are having as well. I have a case with a senior apple advisor open, still unresolved. His suggestion of course, at this point, is an archive and re-install. I'm not ready to go there yet.
BTW, another thing he had me try was to import the file with Image Capture (which works). Then open it in QuickTime Player X. Then try exporting to 480p. Does QuickTime crash? It does for me.
My summary:
1. Files successfully import with Image Player.
2. Files play with QuickTime Player X.
3. QuickTime Player X crashes when exporting to 480p.
4. Files import with iMove.
5. Files fail to import with iPhoto (unrecognized format as with OP)
6. iPhoto import failure/errors are system wide and not specific to a library or a user.
7. rebuilding xpchelper cache and rebooting in my case does not resolve issue.
8. same videos import fine in iPhoto on a totally different system (laptop running same versions of OS X 10.10 and iPhoto 9.5.1)

IPhoto won't import .mov files from iPhone

I'm trying to import the photos and videos from my iPhone and the following screen shows up:
I've only had this trouble since updating to Yosemite. Any help is appreciated.
MacBook Pro (17-inch, Mid 2010)
8GB Memory
2.53 GHz Intel Core i5

There are many, many posts of this nature in these forums. See, for example:
iphoto won’t import mov video
For many, rebuilding the XPC helper cache solves the problem off the bat. In terminal try this, and reboot:
sudo /usr/libexec/xpchelper --rebuild-cache
The above posted by Andy Ball on a thread related to a similar problem with Aperture:
Re: Import video to Aperture library on Mountain Lion
Other things to try:
1. create a fresh iPhoto library and try that. (hold down opt while launching iPhoto)
2. create a new OS X user (in system preferences) and try there.
In my case – and many cases – neither of those things work either, which means the problem is system wide. Again suggesting that the xpc helper solution might work. But for me it did not either.
There are other suggestions that there are conflicts with Perian (on Yosemite) and flip4mac. In my case uninstalling both of those didn't solve it either.
So maybe one of those solutions will work for you, results apparently vary. But this is a huge unresolved issue many others are having as well. I have a case with a senior apple advisor open, still unresolved. His suggestion of course, at this point, is an archive and re-install. I'm not ready to go there yet.
BTW, another thing he had me try was to import the file with Image Capture (which works). Then open it in QuickTime Player X. Then try exporting to 480p. Does QuickTime crash? It does for me.
My summary:
1. Files successfully import with Image Player.
2. Files play with QuickTime Player X.
3. QuickTime Player X crashes when exporting to 480p.
4. Files import with iMove.
5. Files fail to import with iPhoto (unrecognized format as with OP)
6. iPhoto import failure/errors are system wide and not specific to a library or a user.
7. rebuilding xpchelper cache and rebooting in my case does not resolve issue.
8. same videos import fine in iPhoto on a totally different system (laptop running same versions of OS X 10.10 and iPhoto 9.5.1)

PE8 won't import .mov files

I am using a new installation of PE8 on a new computer. When attempting to import .mov files I get a message saying that the file type is not supported or the required codec is not installed. .mov files should be supported and there was never a problem on my old machine.
Some history. The files were digitized on a mac using final cut pro and then transferred to this windows 7 computer. I renamed the files to .mov as I have always done in the past without issue.
Any ideas?

MOV is but a wrapper. A lot of stuff can be inside them. This ARTICLE will give you some background.
As Steve asked, where did the files come from?
If you are on a PC, and the material was captured on a Mac, it is likely that there is a CODEC, specific to the Mac, and not available on the PC. If that is the case, then the ONLY way to handle the files is to Capture on the Mac, but with an X-platform CODEC.
Good luck,
Hunt

IMovie Won't Import Any Files

I've previously imported all of my GoPro videos into iMovie for editing without any issues. Suddenly, when I try and import my most recent GoPro videos, it acts like it is going to import and displays the "Processing Event" box. Then nothing happens. I thought that was strange so I tried to import videos shot on my iPhone as well. They also did not work. I've now gone through and tried to import several different video formats and I always get the same response. It acts like it is working, then nothing shows up.
At the bottom of iMovie, I have the "Show All Clips" selected, so any available clips should appear in the event. None of the files I'm trying to import are grayed out or anything, and I've never had issues in the past. Not sure what has suddenly changed. Please help.

Here's some additional information that is more frustrating. I opened iMovie on my Mac Book Pro and did the same import on the same GoPro files and it worked fine. No issues. I can't figure out why it won't import on my iMac. I also just updated my iMovie software to the latest version, and still no luck.

Imovie won't import AVI files since upgrade to imovie 06

Hey everyone
I've just upgraded to imovie 06. Everytime I try to import movies made on my Digital Camera a sign saying: 'Error during Import, The file could not be imported: Unknown Error.
I didn't have this problem before upgrading to imovie 06. I wonder if anyone can help?
See ya
Bevan James Eyles

Hi BJE:
When you upgraded, did you upgrade your quicktime as well?
Sue

FCP 4 HD won´t import mov files

Hi,
I exported a clip with the QT conversion option and added a few of the menu´s special effects (lens flare, sepia, etc.). The file opens all right with QT, but when I try to import it to FCP, I get an error message. This also happens if I try to open the file from my desktop using the "Open with..." option and select FCP.
I had no problem importing the file to iMovie, so I am really puzzled about this...

File error: 1 file(s) recognized, 0 access denied, 1 unknown
I get that message. I wanted to know if you found a solution. I am using Final Cut 4.5
I just started getting error messages whenever I try to import a file. Whatever file I choose gets a window that says:
"File error: 1 file(s) recognized, 0 access denied, 1 unknown"
Never had a problem with Final Cut before. I'm baffled. Please help. I already tried trashing the preferences.
I am not able to import any type of file at all. Quick time movies, audio, livetype, etc. I have been able to import all these files for several months. Now for no apparent reason I am unable to import files.
I have looked at different discussions of this same problem. There seems to be an access problem. The files are valid. They will open with Quicktime. They will import into iMovie.
So the problem seems to be that FCP cannot access the files.
Anyone know the solution?

HELP! VIDEO IN CS6 EXTENDED WON'T IMPORT MOV FILES, ONLY JPEG

Hello. I have a problem with the video editor in my CS6 Extented. I have the newest updates (checked an hour ago), and restored default preferences before beginning the first video exercise in Chapter 10 of "Adobe Photoshop CS6/Classroom In A Book". The book came with practice files on a DVD. I installed those (for chapter 10) into my PC. Following the book's directions to create a new video file, everything is fine, and works just as shown in the book, until I import the 9 sample files (6 Jpegs and 3 MOV files). After placing these files onto the timeline, I am instructed to resize the duration of the JPEGs to 3 seconds, that works. But when I go to resize the MOV files, they will not expand. When I zoom in all the way, they are clearly empty place holders, of no lenght. The marker says they are "01F", which looks to me like 1 frame. Yet looking at the files before importing them in to Photoshop and placing them on the timeline, the first two files show as being 11 seconds long, and the third MOV file is 37 seconds long. And, I can play all three files on my Windows media player. But again, as soon as I place these on the time line, they are reduced to a sliver of just one frame, that can not be expanded.
I placed these files first using the method described in the book, which is to "Click the video menue in the Layer 0 track, and choose Add Media." I then went to the lesson 10 folder on my internal hard drive, shift selected the 9 files as directed, then clicked open.   I turned off my PC and then rebooted, three times, always getting the same results. I then went and looked at some on-line traing videos, where they showed selecting the video files, then clicking on the "+" at the right end of the time line, and that did the same thing, moving the JPEGs fine, and chopping the MOV files down to one frame.
As another clue, before creating the video file in the exercise, the book directed me to load the finished file that they supplied, into Photoshop, and to play that in Photoshop, to see what the final project would look like. I did that, and the video played fine. And the book instructed me to note how the files in the timeline matched up with the files in the layers panel, and all of that looked just like in the book. But I can NOT get the video/MOV files to move in to the time line when I do it as instructed.
And I am running Windows 8.1, on a brand new pc with a fairly highpowered dedicated video card with 3 gig of on-board ram, and 16G of ram in my PC.
What do I do?   Thank you, Chuck
[ private info removed by admin ]

Thank you Silkrooster!   I did the download of Quicktime and re-did the video training exercise, but this time it worked flawlessly! Thanks, Chuck
PS: As I entered the forum, I noticed someone else with the exact same problem that I had. But that person was able to ask their question in a couple of simple sentences instead of my long ramble!

IMovie won't import gameplay files from Elgato.

I recently got an HDPVR (The Elgato Game Capture HD) to record gameplay from my Xbox 360. I recorded about an hour of gameplay and used the Elgato's software to import the file into iMovie. It began it's import but got hung up on a part that said "Generating thumbnails." It would say that it would take about a minute but this estimate would climb until it said "about an hour." I've left it overnight and still no import. I tried to close out iMovie (eventually having to force quit it) and start again but now everytime I reopen it, it returns to that same point, refusing to continue on and I have to force quit out of it everytime. Any suggestions on how to fix this problem? Please help.

bobebaba wrote:
… It is MP4 file, 275 MB, 20 minutes.…
iMovie is by concept for camcorder imports.
20min crunched into tiny 250MBs means highly compressed - iM has to convert it into an editable intermediate.
20min crunched into tiny 250MBs means 'exotic' codecs - mp4 is a container, or media-wrapper, no 'format'. when it comes to DivX and stuff like that, you have to manually convert BEFORE import into iMovie.

Premiere Pro CS5 won't import mov file?

Mac Mini OSX 10.6.8 2.4GHz Duo Core Intel 8GB RAM: Quicktime 10.0(128)
I have serveral MOV files that a Camera Crew shot raw footage then recaptured to MOV for me but now I found out that I can't import these files into Premiere CS5, I get a codec miss or unavailable error. I can't even play this MOV file in QT, it says I need a codec. I don't have Final Cut Pro or iLife. What is the codec I need and where can I get the codec to Import my MOV files into Premiere Pro? Or is there a way for me to recapture these files?
Here's a screenshot of the MOV file info. Thanks for any help, I'm new to Premiere

You may have been given video encoded with the Apple ProRes codec. Apple provides free decoders you can install that may be able to help you out.
http://support.apple.com/downloads/Apple_ProRes_QuickTime_Decoder_1_0_for_Windows
http://support.apple.com/downloads/Apple_ProRes_QuickTime_Decoder_1_0_for_Mac
If these don't work, you video may be encoded with an Avid codec. Avid has their full range of codecs available for free. What's nice is that you can both read and record with them.
http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=392959&ssdFilterCommunity15=1 408&ssdFilterCommunity13=0&ssdFilterCommunity11=0&ssdFilterCommunity10=368&ssdFilter_Searc hKeyWord=codecs&page=1&ssdSearchOperator=0&ssdFilterCommunity3=0&Hilite=codecs
Hope this helps.

IMovie 08 won't import .mov files

Similar Messages

Maybe you are looking for