IMovie 09 BUG ? Amendments to Titles not reflected.

Something irritating happens to me in using iMovie '09.
I made a short 5 mins movie, after testing and what not & after being satisfied, I then goto Share > Export Movie, type a filename then press ENTER. A message then appeared and say "Preparing project ...". After 7 mins, the movie is completed.
Then when I played the movie, I realized I don't like the fonts of the titles. So I went back & amend the Title. Then I repeat Share > Export Movie. When I chose the same filename, it asked me whether I want to replace the old file. So, I clicked REPLACE.
When I opened up the file, it played the old movie (meaning the amendment of the title was not reflected). How come it is still playing the old file ?
Fed up, so I tried again, this time deleting the old file before sharing it again. Doesn't work, I tried deleting old file and naming a new file, it also doesn't work. I notice all this time after clicking Share > Export movie, instead of the message "Preparing Project", the message now says "Exporting Movie".
Being too fed up, this time I tried inserting some photos & then took it away & do more amendments. This time when I clicked Share > Export movie, it says "Preparing Project" and it worked !!
I can only conclude that after you clicked Share > Export movie, if the message says "Preparing Project", it will work but you got to pray that the message that comes out is not "Exporting Movie".
Is it a bug that you must make more amendments than just changing the fonts of the Titles ?
Is this a bug ? Or is there some settings that I missed out ?
Any ideas what went wrong ?
Thanks

I don't see prores 422, I do see aic. I tested this the other day and it offers zero compression, but it still gave me a soft output. I must have done something wrong with the settings. I used the preset for HDV 1080i and it still wasn't good. How do i get proress 422. Do i need to have final cut pro? I hope not.
tx

Similar Messages

  • I created a iMovie with photos, music and titles; shared it with the media browser and burned it on a DVD RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

    I created an iMovie with photos, music and titles; shared it with the media browser and burned it on a DV+RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

    Probably because they don't accept that media.
    Try using Verbatim DVD+DL (if your project exceeds 2 hours) or Verbatim DVD-R if it doesn't.

  • Character string of en_AE and en_IL supported by CS6 is not reflected in a dialog title of plugin.

    Character string of en_AE and en_IL supported by CS6 is not reflected in a dialog title of plugin.
    [Development environment]
    Flex SDK 3.4
    Extension Builder 2.0
    Flash Builder 4.6
    Does development environment have restrictions?

    I have tried that already in my program. Its not
    working.Please elaborate.In my program i have tried the following lines. Those println statements are not printing anything. As i am using NetBeans IDE i can see that the program is not exiting, neither the dialog box is disposing, I am explicitly clicking Stop Build/Run to exit out of the application. I think only its becaming invisible when i am clicking on the [ X ] close button.
                    frame.addWindowListener(new WindowAdapter() {
                            public void windowClosing(WindowEvent e) {
                                    System.out.println("Inside frame.addWindowListener");
                                    LoginDialogTest.this.dispose();
                                    System.exit(0);
                    //control is not coming here
                    LoginDialogTest.this.addWindowListener(new WindowAdapter() {
                            public void windowClosing(WindowEvent e) {
                                    System.out.println("Inside this.addWindowListener");
                                    LoginDialogTest.this.dispose();
                                    System.exit(0);
                    });

  • IMovie 10.0.1:  Stabilization doesn't work.  I have tried several times, it just grays out.  Also, fonts, font size, color of title not working.  What's the skinny?

    IMovie 10.0.1:  Stabilization doesn't work.  I have tried several times, it just grays out.  Also, fonts, font size, color of title not working.  What's the skinny?

    PROBLEM SOLVED!
    I went to my device manager on my Windows 7 PC and found the Bonjour service in my Services and Applications section. I set it to manual and BANG iTunes started working like it's supposed to.
    Unfortunately, I let my IPad get stolen on 17 Jan so I'll probably wait until after April to replace it with an IPAD 2!

  • Compiled CHM File Does Not Reflect New Project Name

    I have read many of the experts' responses to posts and found them extremely helpful. However, I have not seen one that addresses my issue.
    I have RH HTML Version RH8. I renamed a project via 1) File - Rename Project and 2) Single Source Layouts - Primary Layout - Properties - Output Folder and File Name.
    Two problems are: 1) The Project Folder name still reflects the old project name and 2) The CHM file still reflects the old project name.
    As a result, the output Help that the user sees still has the old project name in the title bar.
    All generated files as well as the RoboHelpHTML Project File were changed to the new project name, just as the RENAME PROJECTS Help says it should. However, the CHM file does not reflect the new project name as it says it should.
    1) Can I change the Folder name that was created when I compiled the Help file to the correct name?
    2) Can I change the FILENAME in the SELECT OUTPUT FOLDER AND FILENAME  window?
    3) Can I / should I rename the TOC and Index filenames from the old project name to the new project name? (Help says that changing the project name does not change these file names and it didn't.) 
    Will any of these actions correct the problem? I appreciate any help you can give. 

    Welcome to our community
    Try File > Project Settings.
    And if that doesn't get it, try the Project Set-up pod, windows and change the Window Caption.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie.  Is there someway to refresh the IPhoto event in IMovie?

    Background:  I'm transferring file folders from a Visa laptop via an external hard drive to my IMac.  In the folders are photos and videos from different cameras.  SO I first tried to import to IMovie but it would not recognize any of the files.  So then I imported into IPhoto and both photos and videos were imported and I created events for each folder.  When I first opened IMovie I had to wait for it to create "thumb nails".  Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events.  I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie.    I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie. 
    I'm doing this on three events with about 100 photos and videos.  But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie.   I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.  
    Appreciate any tips or pointers.
    OBTW this is my first question as a first time Apple owner. 

    It was suggested I move this question to IPhoto or IMovie which I did. 
    Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
    I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

  • Indent changing is possible but changes are not reflecting after refresh

    Hello all,
    I am facing one issue with alignment in the BEX. i need to changed the the result rows. initally the indent is 2 , am changing it to 1 and saving as existing report. after  refreshing the workbook. the changes are not reflecting. can anybody provide me some inputs on these. any help is appreciated.

    Hi Priya,
    You need to Implement the following SNOTE's for these changes.
    Union Budget 2015: As per Finance Bill 2015, the Government has implemented amendments to existing sections and introduced new sections in the Income Tax Act. Changes have been made in the following topics:
    Tax Surcharge Rate
    Increase in Conveyance Allowance
    Section 80
    Sukanya Samriddhi Scheme: The Government has launched this new deposit scheme for the minor girl child. This is a savings scheme that can be opened by the natural (biological) or legal guardian of a girl child aged below 10 years. Related Notes:
    2139208 - Union Budget Changes – 2015
    2138605 - Sec80C: Sukanya Samriddhi Scheme
    Upcoming Developments:
    PF Admin Charges Revision
    Professional Tax for Mizoram & Nagaland states
    Average Rate of Tax
    Regards,
    Venkat Polisetty

  • Custom theme changes are not reflecting after SP upgrade in Portal 7.3

    Hi,
    I am facing issue with a custom theme after the upgrade of Portal 7.3 from SP7 to SP12.
    The landscape has the integration of Web Dynpro ABAP components in Portal. The custom font color set for the field name is not reflecting, instead it show the font color in blank.
    Looking for your inputs.
    Thanks, Ansar

    Hi Priya,
    You need to Implement the following SNOTE's for these changes.
    Union Budget 2015: As per Finance Bill 2015, the Government has implemented amendments to existing sections and introduced new sections in the Income Tax Act. Changes have been made in the following topics:
    Tax Surcharge Rate
    Increase in Conveyance Allowance
    Section 80
    Sukanya Samriddhi Scheme: The Government has launched this new deposit scheme for the minor girl child. This is a savings scheme that can be opened by the natural (biological) or legal guardian of a girl child aged below 10 years. Related Notes:
    2139208 - Union Budget Changes – 2015
    2138605 - Sec80C: Sukanya Samriddhi Scheme
    Upcoming Developments:
    PF Admin Charges Revision
    Professional Tax for Mizoram & Nagaland states
    Average Rate of Tax
    Regards,
    Venkat Polisetty

  • The logo for the application has been changed in Azure portal, but it's not reflected during the login

    Hi Azure support,
    my name is Linda, Office365 technical support. I want to ask one Azure question on behalf on my customer. she has AAD_basic subscription.
    she tried to change logo of one application, but failed. she followed the steps as below:
    1. add the "Logo" in the application;
    2. logo not reflect in the login page.
    I cannot attach the screenshot, if you want, you could email me v-linsha
    hope you could give some suggestion and resolution. thank you.

    Sometimes I know I haven't changed anything in the external file. In this case, the supposed conflict seems to be a bug and I overwrite with Lightroom metadata without exception (but with fingers crossed) - that bug has been reported.
    Other times however, I have edited the file in an external editor, and its possible that the external editor wants to add some information that may be worth having, or it may be that its lost the original information - this is when its a dilemma:
    If I overwrite disk file with Lightroom metadata, I may be losing what the external editor added.
    If I overwrite Lightroom metadata with disk data, I may be losing what Lightroom had and the external editor dropped.
    This scenario has not been reported as a bug, since I don't know if it is one. If I could see the difference between the two, then I'd know.
    Rob

  • Commit not reflected in multiple instances

    Hi,
    I have 2 instance myapp1 and myapp2 for the db myapp. The version is 10g. When I run a procedure to insert multiple records and commit in one instance, it is not reflected in other instance for atleast 2-3 minutes. I believe it should happen instantly.
    Can anyone throw light on this?
    Regds,
    noneda

    Are you on 10gR1 or 10gR2?
    On 10gR1, max_commit_propagation_delay(as sybrandb said) parameter can affect the delay of commit propagation. You need to check this parameter or browse metalink for bugs.
    On 10gR2, this parameter is deprecated and commit is propagated without delay. So you seem to on 10gR1. If not, you need to check metalink for similar phenomenons.

  • Changes to business rules in EAS not reflecting in planning

    Hi Friends,
    One of my client is facing the issue issue.Could anyone help on the issue.
    When a new business rule is created or changed in EAS, the changes are not reflected in Planning. A stop and restart of the service is required to see the new business rule or a change to a calculation.
    This is a consistent error we are having in development.
    Thanks in advance.
    Regards.

    Hi,
    First I would check to see if any patches relate to the issue you are having.
    I would then log the issue with Oracle to see if they can help any further and it could be a bug.
    It sounds like the cache may not be getting updated so planning doesn't see any changes, restarting clears the cache and objects are read directly from the database tables so you can the changes, that is just a guess though.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Update of static LOV data display condition is not reflected in comp export

    Hi team,
    here is another possible little bug in 4.0.1.
    I updated the conditional display for one entry in a static LOV.
    This change is correctly reported in page 4000:4111 in the last updated column, but it is not reflected in the more general last updated column for the entire LOV component (page 4000:4110).
    This affects also the component export where the updated static LOV does not appear in the first places if i sort the report by the most recently updated column (page 4000:688).
    Flavio
    http://oraclequirks.blogspot.com
    http://www.yocoya.com

    Suda,
    1. I am currently on SBO 2005A PL 20, I've checked the issue of the "last purchase price" not being refreshed in the BOM on PL 36 .... Incidentally, the system behaves in the exact same fashion. I heard I can force the data refresh by using a format search, do you know how to do it?
    2. If I don't use "last purchase price", instead using "My price list", thus I can use "Update parent items globally" to update the BOM. To achieve this goal, you suggest to use DTW, which I am still trying to figure out, meanwhile I've checked the SAP SDK and found the table ITT1 contains a column "PriceList" , which flags the certain price list being used. Can I reset this field to flag my price list without affecting data integrity?
    Thanks...
    Edited by: Rui Pereira on Apr 29, 2009 1:15 PM
    Edited by: Paulo Calado on Jun 17, 2009 1:08 PM

  • File name changes not reflecting in library AND Nano...

    When I make changes to songs(title,artist,etc) in my ipod library these changes do not reflect on my nano if those songs are currently on the nano.
    For example: if I change a song name in the library, if that same song is on my nano, it will still remain the same and not make the changes itself.
    I don't understand b/c on my shuffle, any time I would make a change, whether in my library or on the shuffle, the change would reflect on the other end.
    If I name a song 123 in the library and that same song is currently on my Nano as 321 it won't make the change to 123 unless I do it myself again. Once in the library and again on the nano playlist. It seems whenever I make a change it should be the same no matter where the song is located. Is there a way to make the changes show no matter where the song is located ?????????

    Well something isn't right. I have my shuffle connected to. They both have the same songs and once I make changes to songs that are on both the nano and shuffle, the shuffle shows those changes but the nano doesn't. The nano doesn't even after I hot the sync button. It's like the files on the nano are totally seperate files and they aren't connected to the library.
    Cliffs:
    I have the Nano to manual mode and I'm hitting the sync button but the changes do not take place but the shuffle does. Am I missing something?

  • Anyway to "UN" Ken Burns stills globally or as default bringing in jpeg's?  New to iMovie. I have 3 titles that build.  First is logo, add prod't name second line, add date 3rd line.  They shift when dissolving between them. Title function NG for this.

    Anyway to "UN" Ken Burns stills globally or as default bringing in jpeg's?  New to iMovie. I have 3 titles that build.  First is logo, add prod't name second line, add date 3rd line.  They shift when dissolving between them. Title function NG for this.
    The people at the Apple store gave me a long, tedious workaround which is open Pages and bring in logo.  Export it as a PDF.  Open the PDF in Review and then "Save As" a jpg to the desktop and drag and drop into the imovie.  Even with this process, the text will sometimes shift.  When it works, it looks good, the logo comes up, then the second line fades in under it as part of the build and then the third line completes the graphic.  It would something this easy and straight forward would be easy. 
    HarveyV

    I did the work around for the titles/jpg's in this short video. 
    I'll try your fix on the next one.  I have 22 short 3-5 minute videos to produce
    and I'm on number 5.  This should save me a bunch of time. 
    It would appear that you know more than the guy at the Apple Store. 
    Thank goodness for on-line forums.
    I already tried fixing them individually as you suggested,
      by going the crop/fit route.  However, even then,
      the second in the series had always shifted. 
    The first and the third images lined up, but not number 2.. 
    So  I brought in all the images, (1, 2 and 3).  
    and then the 2nd image again and put it in the third position
    in the sequence on the time line. I deleted the "original" 2nd image.
    So I had 1, 3, then 2.  Then I dragged and dropped the correct number two
    into position two and it worked.  So what happens is that the
    client logo appears, then that stays put and the next line dissolves in
      and then the third dissolves in.  They are three separate titles, but they
    are aligned perfectly so that they build as I dissolve between them.
    I think the problem with the edit copy route would be that while
    I could edit/copy the logo, I couldn't position text through the
    iMovie text function exactly as it only gives you middle or bottom third etc.
      Each title with the product name is positioned individually depending on
    length and number of lines. By going through Pages, I can position the logo
    and the text exactly.  Also, some logos are horizontal, while others
    are square etc., so text positioning is crucial.Anyhow,
    I'll try the global approach for the next one and see how that works.
      Thanks very much for your insight and especially for your prompt reply.
    I trust you're inside on this gorgeous July 4th because you're
    making money on your computer. ;-)HarveyVOn 7/4/2011 3:57 PM, Apple Support Communities Updates wrote:
    > Apple Support Communities <https://discussions.apple.com/index.jspa>>>>       Re: Anyway to "UN" Ken Burns stills globally or as default>       bringing in jpeg's? New to iMovie. I have 3 titles that build.>       First is logo, add prod't name second line, add date 3rd line.>       They shift when dissolving between them. Title function NG for...>> created by AppleMan1958 > <https://discussions.apple.com/people/AppleMan1958> in /iMovie/ - View > the full discussion > <https://discussions.apple.com/message/15552380#15552380>> ------------------------------------------------------------------------>> I am baffled by what you are asking...but if you are asking how to > turn off the Ken Burns effect, you can do it for future photos you add > by going to File/Project Preferences and setting the default initial > photo placement to FIT or CROP rather than Ken Burns.>> For a global change on photos that are already in your project, pick a > photo. Open the Rotate, Crop, Ken Burns Tool. Select FIT or CROP.  > Exit the tool. Now select this same photo and EDIT/COPY.>> Now, EDIT/SELECT ALL.>> Finally, EDIT/PASTE ADJUSTMENTS.../CROP ADJUSTMENTS.

  • List view web part not reflecting changes made to list view in SharePoint Designer

    Dear All,
    When adding a list view web part containing a view modified in SharePoint designer (e.g. conditional formatting applied, or group headers modified) I'm finding that the changes made in SPD are not reflected in the web part. 
    For example, I go into SPD edit a view, and the view appears correctly when I go back into SharePoint, however when I link to the view within a list view web part it results in losing the changes made in SPD. 
    Becasue it's a publishing page I'm unable to edit the contents of the web part in SPD.
    I'm sure this is expected behavior but how do I get around this?
    Thnaks,
    MDB

    Try below
    http://stackoverflow.com/questions/19533998/sharepoint-designer-doesnt-show-anything-in-list-and-libraries-link
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/a63a1894-6b1d-420a-95dd-b6c546eab34d/updates-made-to-sharepoint-designer-2010-workflow-do-not-show-up-on-the-server?forum=sharepointcustomizationprevious
    http://stackoverflow.com/questions/5959521/sharepoint-designer-saves-the-changes-but-it-does-not-affect
    http://social.technet.microsoft.com/Forums/en-US/1e9a8c27-bbc5-4a6f-8daf-4b243182f543/changes-in-sharepoint-designer-2010-not-showing-in-sharepoint-server-2010-page?forum=sharepointadminprevious

Maybe you are looking for