Imovie 09 fade in & out not working!

hello all, I'm new to the forum. So i was editing these movies right? and the fades were working perfect with the mp3s. so i finish THAT project and started a new one and the fades don't work anymore, and a open a NEW project and they didn't work either. have a mac mini with 4gb ram at 667 mhtz. all of the sudden the fades stop working for these SEPARATED mp3 files. (separated meaning they are NOT audio files that were DETACHED from the video. They are just ADDED mp3 (music) files as background music). so what gives people?!

they are all true. i CLEARLY state that. all i did was try different methods to fix the issue and ONE of them worked temporarily. just keep in mind that MY mp3s, wav, aif, caf, m4v or whatever EXTRA audio i'm adding to the clips aren't working. and by EXTRA i mean background sounds/music and such. sorry to sound blunt, but instead of asking me all these questions (so that we can find a solution faster) is there something that shouldn't be done or something that is causing this issue? is there a certain quicktime i should have? or certain codec?
i believe its easier to STATE something that can cause a problem to ANY specific situation regardless of the situation, rather than ask a bunch of questions that can relate to the problem. this way, the "helper" can provide the "need" with INSTANT information and can cut the process in half. see what i mean?
don't get offended, i'm not trying to be an a$$. its hard to sound friendly in text form. i'll add some smileys
but yea, back to my problem. i did manage to fix it for like two minutes, but the problem came back. should i reinstall?

Similar Messages

  • Fade In/Out not working

    Hi
    Applying Fade Ins or Outs seemed to have stopped working. Using either the crossfade tool or specifying them in the Inspector, they appear graphically correct, but audio-wise, no fade.
    Crossfading between regions is working fine.
    Using ordinary uncompressed mono aifs.
    Haven't used Logic for a couple of months, so wondered if something has broken/changed in the last couple of minor updates.
    Are there any factors, other than audio file-type, that will prevent fades from working?
    Using Logic 9.1.3 on OS 10.6.5
    Thanks for any feedback
    Steve

    Hi
    I'd do a boatload of simpler troubleshooting before I did a complete re-install!
    Try these steps when you have some downtime:
    1) Only a specific project affected, or same for any (including starting from a default blank template rather than any user-made one)?
    Specific project.... corrupted or other problem?, any project... "Logic" problem?
    2)
    Login as a different user (if need be make a new user account with 'Admin' access). Repeat test 1
    If the problem goes away, it's likely Logic Preferences in the original user account are corrupted.
    (Note there could be other reasons.... ! )
    HTH
    CCT

  • CS5 Aplha Fade Out Not Working

    Has anyone encountered the alpha fade in CS5 not working when fading a graphic out? Example, I want to fade out a graphic symbol from 100% to 0%. When I try to make my fade to 0%, the alpha slider snaps to 100%. Hopefully someone can help out.

    Okay, I think it's faster with a visual. Let's focus on the "train" layer. As you see I have four keyframes, the first set fades up from 0 to 100 and the last set is supposed to fade out from 100 to 0 but the the last keyframe where the playhead is, won't go to 0.

  • Soundblaster X-Fi Titanium Optical Out not working???

    Hey friends,
    I purchased a Sound Blaster X-Fi Titanium PCIe yesterday to run on Windows 7 64bit to trigger VSTi instruments. I can hear the VSTi play fine when I have headphones plugged into the soundcard but I want to send the audio sound OUT via the Optical Out into my Steinberg MR86x firewire audio card. ?
    I can see the light on the optical cable but no sound seems to be being sent from the sound blaster into the steinberg card.
    ?Now before people start saying you cant do that, I have have been doing this for the last 3 years and it has been great apart from my RME Audio card is not compatible with Windows 7 64bit hence why I purchased the soundblaster.
    I really am at a loss as to what I can try next, I have been through this forum and tried a few recommended tweaks but nothing? Am I missing something obvious here?
    I am using the following drivers
    Driver: v2.7.008 Windows 7 64bit
    DTS Connect: for Windows 7 64bit
    Also in the Audio Control Panel / SPDIF I/O all options are greyed out apart from the Digital Output tickbox, I only want to use this card for Audio as in creating music or specifically for triggering VST synths.
    I would really appreciate any advice
    Thanks in advance
    KiloHurtz

    Re: Soundblaster X-Fi Titanium Optical Out not working?I have same card, same?OS?and lots of problems.
    Analog outputs(control panel->sound->speakers) disappears when boot or reboot, sometimes it works week, sometimes a hours. When it works, it's works ok, but suddenly during boot,?all sounds is lost, when trying launch for example Creative Audio Control Panel this message appears: There are no supported audio device available. You need to close the application. Click OK to close the application now.
    And when analog outputs disappears, no any sound via SPDIF, even it shows in notification area and control panel->sound and in device manager.
    I have owned card about two months, once change card in warranty, and?several uninstall, cleaning traces, reinstall and card works for while?and?out of blue, when boot computer, no sounds at all and only way to get sounds back is driver uninstall, cleaning and reinstall.
    Creative Customer Support seems to be clueless, but make Technical Support Request if problems continue. And all other too, if problems like that appears, contact to Creative, maybe they really try?to do?something abuot it and not just send instructions how to uninstall and reinstall drivers.

  • Tv out not working on ios 8? please tell me what is problem?

    When i update my iPhone 4s to iOS 8.1 tv out not working .     Help mee plzz

    If those numers are ordered correctly it sounds like you are using a faulty charger with your iPhone.  It should charge faster with the charger than a USB port as the charger supplies a higher current.  Different batteries are going to charge differently based in part on differences in the ways they have been used.
    Try using your friends charger with your iPhone and see how long it takes to charge compared with your charger.

  • Audio fade in and  out in imovie 11 with a transition not working

    When I fade audio out and fade audio in imovie 11 with a transition in between the fade would not work. If I remove the transition they would work. How can I fix this. If i reinstall life 11 would it lose my would or repair the issue.

    I am having the same problem. I found a decent workaround:
    At the point where you want to fade out, record a voiceover (using a mic) of silence. In other words, cover the microphone and record nothing for a second or two.
    Then go into the audio settings for this voiceover and select the "ducking" checkbox, and change the setting so that all other tracks go to 0% sound when the voiceover is playing. The ducking feature has a built-in fader, so this way, when the silent voiceover comes on, it fades out the other track(s)--effectively giving you a fade-out effect on any concurrent track.
    Not a perfect solution but can help...good luck!

  • Fade in Fade out not working on Rollover Image for Captivate 6

    Hi
    I am totally baffled with this issue.  When I use Fade in 0.5 sec and Fade Out 0.5 seconds on a rollover image, it will not work.  I even changed the default on my preferences for rollover images and it still will not work and does not show in my accordian panel in properties.
    If I use Captivate 5, I do not have any problem.  Any suggestions?
    Thanks
    Jeff

    Are you forgetting that a rollover object has two parts?  It has a hit area and the object that appears when you mouse over the hit area. Each part can have different settings in the Properties tab. In a  rollover caption, the object that appears is a text caption.  In a rollover image, the object is an image.
    If you select the rollover object on the timeline, the Properties you see for it in the Properties tab are for the hit area.  So having fade in or fade out set there will not affect the object that appears on mouseover.
    If you select the caption or image on the stage in Edit mode, the properties shown in the Properties tab are for that specific object and can be different from the hit area of the same rollover object. 
    In your case, make sure that your image is set to have fade in or fade out.  Fading on a hit area of a rollover object is not really useful at all.

  • After renaming and moving to my desktop an iMovie project, i can not open it. I moved it back to iMovie but still it is not working. I noticed that there is not an Event Folder for the project. Can someone help me?

    I renamed an iMovie project, then I moved it out of iMovie to my desktop. It did not work from there. Finally I managed to move it back to iMovie, but still does not work. I can't edit it, it does not even appear as an option. I found out that the Event Folder for this Project is gone. Is this the problem? Is there a way I can get it back? Can somenone help me?? Obviously after so many mistakes you can tell I am new on this. Any help will be appreciated it!!!!!

    OK Let's take a step back.
    If you imported video clips from a camcorder there would be an Events folder in the Movies/iMovie Events/ folder.
    You have the option as you import from a camcorder to send your Event to an external drive instead. In this case, it would be in the iMovie Events folder at the top level of the external drive.
    If your project has no video clips, but only photos, there may be no events folder, only links to iPhoto.
    Similarly, if your camera imported your video clips to iPhoto, and you used the iPhoto event in iMovie, then your clips are in iPhoto, and there is no separate iMovie event.

  • MacBook video out not working

    Hi there
    I bought the mini-dvi to s-video/composite output to connect my MacBook up to a TV while away from home (to watch TV and movies) but it doesn't work. First I suspected the old TV, but works OK with the Wii connected. Then I thought it was the cable, but I tried a new cable and the sound works fine, so that's not it. Then I suspected the adapter, but when I got home I connected it to my wife's MacBook and it worked fine.
    So, looks like I have dodgy graphics card hardware?
    The MacBook detects that the adapter is connected, so some of the pins are working OK. I just can't get a signal from my MacBook to the TV and the auto detect does not work.
    Anyone got any ideas? The computer is no longer under warranty and I don't have time to take it to the dealer (it takes them three weeks to turn around a fault!) so I'm guessing that I'll have to open up the device myself and check for some bad connections?
    Any advice is appreciated!
    Regards... Jonny.

    Video out under 10.5.2 works fine for me and for a colleague of mine with a more recent MacBook Pro. I'd wager it's a problem with your Leopard install, not a universal one.
    Also, FYI, Apple doesn't read these forums; they're just for user-to-user help. If you want to leave MacBook Pro feedback for Apple, do so here:
    http://www.apple.com/feedback/macbookpro.html
    But again, I do not believe yours is a universal issue. We'll be happy to help troubleshoot though. What do you mean the image is "unstable"? Could you take a digital photograph of the external monitor's screen and upload it somewhere?

  • Digital video out not working

    For some reason on my 2011 Mac Book Pro the digital video out does not work?  It works just fine using the minii adapter for analog video out, but not for digital?
    Any advice much appreciated!
    Thx
    Mark

    It is working exactly as it is supposed to. You didn't read the description properly before buying.
    Video mirroring is available on the iPhone 4S, not the iPhone 4.
    Video out needs to be supported by the app you are using.

  • IMovie in iLife '08 will not work on a PowerBook G4 and....

    What a pain.
    1) Install the new OS X Leopard -- discover iMovie and iDVD no longer work
    2) Get the new iLife 08 -- discover the new iMovie does not work on a PB-G4
    Model Name: PowerBook G4 15"
    Model Identifier: PowerBook3,5
    Processor Name: PowerPC G4 (3.3)
    Processor Speed: 1 GHz
    Number Of CPUs: 1
    3) Okay Apple what do we do now?
    4) Is this a forced hardware upgrade???
    Thanks for the help.
    All the best,
    jh

    Our powerbooks can not run iMovie'08. Not enough horsepower.
    That is why we are offered a free download of iMovie '06.
    Joe

  • System.out not working on eclipse

    Greetings...
    I am no longer a newbie on Java, but I have been facing an issue lately that I have been unable to resolve myself, even though it seems to be something so silly.
    I have been using eclipse for development, and by developing a simple "Just to practice" code I have found myself unable to use System class or any of its methods at a certain point. See the code below:
    package one;
    import java.util.Scanner;
    public ClassOne {
    public static void main (String args[]){
    Scanner reader = new Scanner(System.in); /*Works just fine here*/
    int x = 0;
    System.out.println("Type in the number of objects expected"); /*Does not work at all, like if System was something I could not use at all. Not an identifier */
    Scanner readertwo = new Scanner(System.in); /*System does not work here either*/
    }Even if I rewrite the code after that, by erasing the import statement and all other System references in the code, System does not work again.
    If anybody has ever faced the same issue and knows what I am doing wrong and what I can do to fix it, I'd really be grateful.
    Thanks to all, and happy 2009.
    Santana T

    Santana_Thiago wrote:
    It works on NetBeans.
    On eclipse I get the following error:
    ERROR: JDWP Unable to get JNI 1.2 Environment, jvm->GetEnv() return code = -2+
    *JDWP exit error AGENT_ERROR_NO_JNI_ENV(183): [../../../src/share/back/util.c:820]*+
    The funniest thing is that if copy and paste the code from somewhere else into eclipse it works. What a drag!!!!
    Thank you.
    Santana TNever seen that error but it sounds to me that your Eclipse installation is screwed up!

  • I have iMovie '11, and I am unable to access mpeg HD video files that I want to edit.  The files are fine (I can open and watch them using VLC), but I cannot seem to import the files into iMovie. File Import does not work.  Any suggestions??

    More detail: I have a bunch of mpeg HD video files that were shot on a SONY HDR-HC3 Handycam camcorder.  I would like to edit these into a single video production.  I can access and view the mpeg files using VLC (Quicktime does not work with them).  However, I seem to be unable to get the mpeg files to interface with iMovie '11 -- I cannot use the File --> Import command, nor can I drag-and-drop them into iMovie.
    Is there something anyone might suggest to get this to work?  Or are these files incompatible with iMovie?  If so, I assume I must purchase a different video editing software program (e.g. Adobe Premeir Pro).  Suggestions???
    Many thanks in advance for your time and consideration

      Yes, I tried that.   The files were ordered by their original numbers as imported from the camera, but I batched them through Phocoshop to downsize all of them into a more manageable file size.   I opened that destination folder from quick time  from where it said select image sequence.   I clicked on the first one and opened it.   The result was a large image with an arrow indicating a movie was ready to go.   When I pressed the arrow, though, I realized it had only imported that one frame so there was no movie.   The files are Jpgs and are about 450 KB each. 
        To your knowledge are there any links to iMovie tutorials or quick time tutorials that may address this situation?  Maybe there will be one I haven't looked at yet. 
        Thanks

  • Iphone for VGA Video Out not working

    We have the Iphone/iPad VGA to Monitor connector. We tested it with 3 different iPhone 4 phones... It worked on 2 of them, but the 3rd woudn't work. What possible reason would it not work? The 3 phones had software of 4.3 and higher...

    Dr. L,
    The previous iPod's did not support component video out for newer televisions that support it. The box for the older Video out cables do not say they support the iPhone.
    The current video out cables are available in either component or composite video out. They also say they support the iPhone on the box.
    In addition when shopping the Apple Store online for iPod or iPhone accessories there is a compatibility guide which shows icons of the iPod models or iPhone that are supported.
    Overall my personal experience is that this, and other Apple specific ones, are much smaller compatibility, and downtime driver for IT than many of them I have run across supporting a variety of computer and networking platforms over the last 23 years.
    Hope this helps,
    Nathan C.

  • Video Out not working on Ipod Classic 80gb

    I can't get video out to work on anything. I have a relatively new Onkyo home theater with an iPod dock that has video out cables, and I can't get a picture to show up on the TV. Also, my gym has StarTrac cardio equipment which has video connectivity through a built-in iPod dock. Video is supposed to show up on the TV monitor attached to the cardio machines, but all I get is "no signal".
    Since I can't get either of them to work, is something wrong with my iPod?
    Thanks!

    When you want to show the video on your TV, have you selected TV out in the video settings options?
    If that's not the problem, check this page, http://support.apple.com/kb/HT1454 to ensure you have the correct cable for your iPod, although you need to ensure you have identified your iPod model correctly. Check http://support.apple.com/kb/HT1353 if you're not sure because there is a crucial difference between the Classic and the 5th generation video models. (On the *iPod and iPhone: TV out support* page - http://support.apple.com/kb/HT1454 - look at the third table down, headed *Apple Component AV Cable with iPod Universal Dock or Apple Universal Dock* .) Notice that the Apple Universal Dock and Component cable combination works for an iPod Classic, but not for the 5th gen iPod. My point being; if the STarTrac device you mention has a built-in dock, perhaps it's designed for the iPod Classic, but if you have the 5th gen, it won't work.
    ... and no, I don't know why one dock is called the Apple Universal Dock, while the other is called iPod Universal Dock! Such a similar naming convention only leads to confusion. I know, I had to examine each box in my local store to find the iPod dock among all the Apple docks they had since they thought both docks were identical.

Maybe you are looking for