IMovie '09 - HOW TO ALTER THE TIMING IN TRANSITIONS & CLIPS ????

I did this in iMovie "08 BUT I can't seem to do it in iMovie'09. HELP!!!!

I just figured out HOW to solve my own problem. I MUST BE A GENIUS !!!!

Similar Messages

How to stop the timing out of web Discoverer Plus

I was working in Plus, and it drove me crazy that I would loose my work because I kept my session open and it would time out.How to stop the timing out of web Discoverer Plus?
Thank you,
Olga

Please check Discoverer configuration guide which tells you which parameter to change in preference file(pref.txt).I think you change the value.

How to alter the appearance of Notification in Worklist

I am trying to work out how to alter the appearance of the reponse section of a workflow notification accessed via the worklist.
I have set up three options in a Lookup group. They appear as a row of buttons across the bottom. As a contrast in the PO Approval workflow notification Oracle has the Lookup list as a drop down box with the options.
How is this done, where can I find some documentation?
Thanks,
Michael

The number of possible responses (buttons) determines whether buttons are rendered or a pop list is shown
I am trying to work out how to alter the appearance of the reponse section of a workflow notification accessed via the worklist.
I have set up three options in a Lookup group. They appear as a row of buttons across the bottom. As a contrast in the PO Approval workflow notification Oracle has the Lookup list as a drop down box with the options.
How is this done, where can I find some documentation?
Thanks,
Michael

How to fix the Timing issue in Discoverer reports

Hi,
While running the discoverer report in Discoverer plus is taking more than 1 hour to complete( Gen.time + Extract to excel)
where as the same report completes quickly in discoverer desktop.
how to fix the timing issue in discoverer plus
Thanks
Srinivas

Timo Hahn wrote:
There is a problem with autoHeightRows and columnStretching used together in 11gR1.
Have you tried without columnStretching?
Or have you tried if it works in 11gr2?
TimoHi Timo, Thank you very much for taking time to respond to my question.. :)
Back to my question...
I tried removing the columnStretching although my requirement really requires this but no effect really happens even if I remove this.
Based on my investigation on the generated HTML, I notice the following items:
1. A table is being wrapped in a div that is being set at a fixed height.
2. On first load, if your autoheight rows is set to 6, the framework is setting a height of 96px to the div. This height would almost cut the last row of the table.
3. If you try to refresh the page or try to re-PPR the component, the framework resets it to 102px which causes the last row to be fully displayed.
My only concern is that IE is perfectly displaying this while Chrome and FF are having problem.
Based on my understanding, the framework is messing up the height only on first load. Not sure but this is how I see it. I am really not confident also on my findings
and I would most likely hear other's comment.
Thanks.

I know i can slow down speed in a movie clip but can i and how do i slow down a transition clip? specifically the scrolling credits. it goes so fast i cant read it

i know i can slow down speed in a movie clip but can i and how do i slow down a transition clip? specifically the scrolling credits. it goes so fast i cant read it

never mind i found the answer

How to alter the contrast/brightness/invert/smooth of an image? (beginner)

Hey,
I'm new to image manipulation and processing and have been told to use Java 2d with Image/ImageIO/MediaTracker/BufferedImages already in order to load and save my image, but I just can't find any nice way to learn how I would go about altering at least the brightness and contrast of the image I loaded up into the buffered image tracked by MediaTracker. After this I will be needing to invert and smooth the image then make a histogram, ais there any good tutorial or book to teach me how I woudl go about modifying the pixels within the image because so far I have no idea about what to do for the algorithm or what filter/classes/methods I should be doing from here. Can anyone help me out on how to start manipulating the images? I've seen a few random examples which don't really explain how the things work and I want to understand how to do the algorithms and processing though.

The book Filthy Rich Clients by Chet Haase and Romain Guy does a pretty good job of explaining how to work with images.
Its companion [website |http://filthyrichclients.org/] has links to code samples. Check out chapters 4 and 8 in the Examples section.

How to alter the materialized view defintion with -- For update clause

My db version is 9.2.0.3
My orginal materialized view difination does not have "for update " clause.
how can i alter the mview defination to inclused and exclude the "for update" clause.
I dont want to drop and recreate the mview with for update clause. But I what to change the existing definition.
Please suggest.
Thanks
Naveen.

I already have the view definition in place. I want to change the exising defination, by adding the "for update " clause. Is it possible with any " alter mview ... " syntax.
Below is my existing syntax. I don't what to drop and recreate. Just want to alter the existing definition , with for update clause.
create materialized view test
pctfree 0
tablespace DATA storage (pctincrease 0)
build immediate refresh start with sysdate next (trunc(sysdate+1) +1/24)
with primary key
disable query rewrite
as select * from test@isource;
Please suggest!
Thanks
Naveen
Edited by: user12096071 on Apr 8, 2010 2:56 PM

How to adjust the timing of any effect in After Effects?

I want to make a building shatter at a specific time in my video (using the shatter plugin). However, when I add the effect, it doesn't seem to give me any options on adjusting the timing. I think it has something to do with a stopwatch, but I don't know how to use the stopwatch thng.
PLEASE HELP!
Thanks

If you type "shatter" in the Search Help field at the top right corner of AE the first link takes you to the After Effects / Simulation effects help page. If you click on Shatter effect (the sixth link in the list) It will take you to the specific instructions for the Shatter effect where the force and radius are explained in the first paragraph. There are also links to a bunch of tutorials and other resources for the effect. Farther down you will find a more detailed description of the Force 1 and Force 2 controls including the quote that Todd gave above.
I'm not doubting that you gave a look before answering, but far too many folks expect that everything in AE has a simple click and solve solution. The more you read, the more you use the help tools and the community resources, the more you'll learn how things work and the better and faster you will become at your craft. I actually spend about 2 hours a week just reading over things in the help files that I haven't looked at for a while, just to keep up. I also use the Search Help field in AE all the time to check out other possible techniques used by others in the AE community. If you get in that habit then you will become a better artist in less time. Relying on user forums for a click and solve solution won't do much to help you learn how AE works.

How to alter the default profile for multiple users

I am trying to alter the default profile assigned to users during user creation to a new profile. I know to change the profile for one user using the syntax
alter user abc profile profileabc
The issue I have is that there are 100's of users under default profile and changing for each of them manually would be difficult. The approach that I see is to write a shell script where I connect to the db and get a list of all the users with default profile. Then I loop through the file making connection to the db each time and executing the alter statement.
Please help if you think that there can be a more efficient approach to this.
Thanks

alter user abc profile profileabcspool newsql.sql
select 'ALTER USER '|| USERNAME || ' PROFILE NEWPROFILE;' FROM DBA_USERS;
SPOOL OFF
@newsql.sql

How to alter the display names of grouped items in a document library?

Very odd issue I want to sort items in a document library by the value in a field, that is no problem. The issue is I want them display NOT in alphabetical order for example I have a list that is grouped into 3 groups (Cases, Forms and Support). When you
look at the page they are grouped in alphabetical order from top to bottom, I want them to show up as (Cases, Support and Forms). I tried creating column with with a value 1,2 or 3 with the "3" value attached to "Forms" items and the "2"
to the "Support" item them sort per Grouped value and that works BUT the grouped names appears as "1" "2" or "3". I need them to show as (Cases, Support Forms).
I was wondering if there is syntax to alter the display name while editing within Designer similar to the syntax used to change the display name of a long hyperlink when quoting it in an email or forum submission??
I want:
<FieldRef Name= "Grouping"/> to diplay the three groups by names other than the values in that column, the display names.

Hello,
This might be helpful:
http://sharepoint.stackexchange.com/questions/78958/change-header-on-group-by

How to alter the DEPENDENCIES in a table oracle 10g

I am using Oracle 10g.
I had created a table with DEPENDENCIES='disabled' i.e, default dependencies access.
Now i want to ALTER the table which has DEPENDENCIES='enabled';
Can you give me the ALTER command
Thanks

What is it that you're trying to accomplish from a business perspective?
So far as I'm aware, there is no DEPENDENCIES setting for a table. There is a ROWDEPENDENCIES setting that controls whether ORA_ROWSCN tracks the SCN of changes at the block or at the row level. Is that what you're lookinig for?
Justin

How to alter the alv tree node text?

hi
i want to alter the alv tree node text, many people say it cann't be changed, but
i look into the sample code 'BCALV_TREE_04', the average funtion(select a column and then select average function in the tool bar) can alter the tree node text dynamically.
i try to look into the source code, the it's the sap standard code, all the funtions that user input, it goes to the statement " CALL METHOD cl_gui_cfw=>dispatch.", and i don't understand what this statement do, can someone helps me?

hi
good
The ALV tree report produces uses OBJECT METHOD functionality in-order to produce a
tree structured ALV output.
The creation of an ALVtree report first requires the creation of a simple program to build the ALV
details such as the fieldcatalog and to call a screen which will be used to display the ALVTree.
The screen should be created with a 'custom control' where you wish the ALVtree report to appear.
For the following example it will have the name 'SCREEN_CONTAINER'.
http://www.sapdevelopment.co.uk/reporting/alv/alvtree%5Calvtree_basic.htm
reward point if helpful.
thanks
mrutyun^

How to read the error message like clipping positive or -ve in Tektronix oscillioscope 3012B

During acquiring the Sine wave or triangular wave from TDS3012B, if the amplitude or Max or min is clipping, how do you read the error? I used *ESR?, first time when I ran the error query program, it gave me Error message saying it is clipping, after that If I run again,the error query , It would not give me the error message, I couldn't reproduce it, eventhough but On the screen if I measure, Amp, min and Max it says that it is clipping positive or -ve. I was wondering how to read the error message while aquiring the data? If any one could help me that would be of great help.. Thanks

Usually, reading the error status register clears it. I'm not familiar with this particular model of scope but you may have to initiate a new acquisition in order for the scope to generate a new error. Another possiblity is that a new error will be generated when the vertical scale changes. Unless someone posts with an answer, I'd say that your best bet to get an answer is to contact Tektronix technical support.

How to change the speed of a clip without frame blending?

Hi,
I changed the speed of a clip to 200%. I expected Premiere to drop every second frame. Instead, there is some frame blending making my progressive footage interlaced. For some reason, the frame blending cannot be disabled by using the Use Frame Blending option.
How can I make Premiere simply dropping every 2nd frame?
Thanks in advance!

In my test, all I need do was right click the clip and make sure Frame Blend was not checked.

IMovie 10 - how to delete rejected portions of a clip

I have read all the discussions and connot figure this out. I can view rejected clips, but have no way to delete them or put them in Trash. If I select Move to Trash it trashes the whole clip. Thanks for any help.

Hi
I wanted to delete the "rejected" portions of a clip. I made iMovie show only teh rejected clips and deleted them all. I realized now that iMovie deleted the whole clip that included portions that were marked as favorites, unmarked, not just the rejected. Luckily I do have the original files elsewhere but I threw away a couple of hours of work.
If i have a long clip and I want to get rid of "bad" / "useless" sections of what is marked rejected there should be an easy way in iMovie. Is tehre?
if I split a clip does the original file gets split or not? Is tehre a quick way to do that without a too much cumbersome workaround?
thanks
stefano

IMovie '09 - HOW TO ALTER THE TIMING IN TRANSITIONS & CLIPS ????

Similar Messages

Maybe you are looking for