IMovie 10.0.2 did not install
I have version 10.0.1 installed and was very happy to see the update to version 10.0.2. I ran the update and software update shows that 10.0.2 was installed. However, when I open iMovie and check "about iMovie" it still shows as version 10.0.1 and I still have many green high res photos and blank thumbnails. If I run software update it now says no updates available.
Any help is appreciated.
Jack
Same issue here too. On my iMac 27, it has downloaded 4 times and in Software Update it indicates it was "installed" all four times. But in iMovie it still shows Ver 10.0.1 in the About iMovie graphic. I have not tried to use it yet. Software update is trying to download it again for the 5th time. At 2Gigs a download, my ISP is having a fit. What is the name of the file downloaded for the update to 10.0.2? Where does it go? It is not showing up in the Downloads folder, presumably since it is already "installed?" Why doesn't the Installation fully complete - assuming it is not. Incidently, on my Macbook Pro, it installed correctly and completely the first try.
Similar Messages
-
Imovie did not install, imovie did not install
idownloaded imovie but it did not install i cannot find the application
Unless you have an iOS device, you need to download it from the Mac App Store(or install it from an iLife DVD or the computer's original disks if the computer's running 10.6.8 or earlier) and not the iTunes App Store.
(87521) -
A few weeks ago an itunes upgrade did not install properly on my PC so I had to uninstall itunes and everything associated with it. I was able to reinstall itunes and it works fine including syncing with my ipod. However, now whenever I open my email (outlook) a box pops up stating MobileMe Services has stooped working. This happens a couple of times after I click to close the program. This a nusance and really slows down getting to my email. From what I've found MobileMe was something that used to be used by itunes to sync mobile devices but is no longer used by itunes. I can't find a way to remove this MobileMe from my PC. I've tried going into Contol Panel then Programs and Features to uninstall it but there is no button there to uninstall it. Any suggestions on how this can be removed?
Do you have a backup that you can restore from? Your old hard drive seems to be the problem.
-
On September 24, I got a message from the App Store saying there was an update of the Operating System on my MacBookPro laptop - OS X 10.9.5 - once I updated it, I got a message saying that there was an error in the update and that it did not install properly and that I should re-install the update. I have no idea how to do this. Can anyone help me?
You can manually download the Combo update if in doubt of the integrity of the OS 10.9.5
install on top of what you have, backups are always a good idea.
OS X Mavericks 10.9.5 Update (Combo) -
My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?
I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that are causing the problem.
I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
Kernel Extensions:
com.oxsemi.driver.OxsemiDeviceType00 Version: 1.28.7
com.rogueamoeba.InstantOn Version: 6.0.2
com.rogueamoeba.InstantOnCore Version: 6.0.2
com.Cycling74.driver.Soundflower Version: 1.5.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[not loaded] com.adobe.fpsaud.plist
[not loaded] com.adobe.SwitchBoard.plist
[not loaded] com.bombich.ccc.plist
[not loaded] com.dymo.pnpd.plist
[not loaded] com.intego.BackupManagerPro.daemon.plist
[not loaded] com.micromat.TechToolProDaemon.plist
[not loaded] com.microsoft.office.licensing.helper.plist
[not loaded] com.orbicule.witnessd.plist
[not loaded] com.sierrawireless.SwitchTool.plist
[not loaded] com.stclairsoft.AppTamerAgent.plist
[not loaded] org.macosforge.xquartz.privileged_startx.plist
[not loaded] pcloudd.plist
Launch Agents:
[loaded] com.divx.dms.agent.plist
[loaded] com.divx.update.agent.plist
[loaded] com.epson.epw.agent.plist
[loaded] com.lacie.raidmonitor.daemon.plist
[loaded] com.lacie.safemanager.daemon.plist
[loaded] com.micromat.TechToolProAgent.plist
[loaded] com.orbicule.WitnessUserAgent.plist
[loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
[not loaded] .DS_Store
[loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
[loaded] com.divx.agent.postinstall.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.propaganda.dejavu.dvmonitor.plist
[loaded] com.valvesoftware.steamclean.plist
[loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
iTunesHelper
Synergy
TomTomHOMERunner
Dropbox
3rd Party Preference Panes:
Déjà Vu
Flash Player
Flip4Mac WMV
GR-55
Paragon NTFS for Mac ® OS X
Perian
Printopia
TechTool Protection
Witness -
The latest version of iTunes did not install properly on my Windows 7-64bit PC. I am getting the following error message: "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services."
I have tried the following troubleshooting steps without success:
Restart PC
Uninstall iTunes and attempt to reinstall
Verify that I am signed in as an administrator
Download and save iTunes64Setup file, right-click, and run as Administrator
Disable Norton antivirus software
Any suggestions would be greatly appreciated!Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
MTP USB Device did not install
New PC, Windows 7, Office 2010, My Blackberry desktop software does not see my 9530 Storm I've downloaded new desktop software, but keep getting an error that my MTP USB device did not install when I connect my 9530 to the USB Port.
BACK UP YOUR REGISTRY!!! Editing the registry can be (read: IS) dangerous and can cause no end of pain if done incorrectly.
- To Back Up your Registry: Click START menu and click RUN. Type REGEDIT. Click File, then choose Export and type a name for the Registry Backup, something like REGBACKUP012015 or whatever works for you.
- Click Export and let it export the registry to a file.
- To fix the issue: Follow the folder tree on the left to: HKeyLocalMachine > System > Current Control Set > Control > Class
- Find {EEC5AD98-8080-425F-922A-DABF3DE3F69A} down the LEFT hand side and click on it.
- Under the list on the RIGHT hand side find UpperFilters
- Right-Click UpperFilters and click Delete
- Close the registry editor and restart your PC (without the iphone attached).
- Once restarted and logged back in, plug in your iphone and voila! Windows will actually choose the correct driver. -
I did not install bonjour when I installed itunes now everytime I go to the itunes store I get the blue screen. How to download bonjour? Do I have to re install itunes? If I do, will my music be lost?
I'd try the following document first:
iTunes for Windows: System restarts, blue screen, or quits unexpectedly when accessing iTunes Store -
Java-Applet-Plug-In shows up in Safari, but I did not install Java
Hello,
in Safari, when you click on "Help" and then on "Installed Plug-Ins", you get a list of all Plug-Ins installed. Beside the Quicktime- and PDF-Plug-Ins there's also this Plug-In listed:
I wonder what this is, because I did not install Java on my fresh installed Mountain Lion.
Second thing I wonder about is this: By the fact that this Applet is listed under "Plug-Ins" what affect does it have, when I uncheck the Option for Java in Safaris securtiy options? Do I also need to uncheck "Plug-Ins", or can I leave it as it is? Same questions, if I pretend Java is installed.
Thanks alot for clearing that up! Again, there's a huge security issue with Java, as seen in recent news. And excuse my English.After being connectred to a charging source overnight
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Just bought 64-bit Windows 7, which detected and reInstalled my All-in-One's Printer and Copier, working well, so I don't want to buy new, but did not install Scanner. My 1310 Series installation disk was not for Windows 7, actually, nothing past Vista and XP, and Win 7 doesn't seem to be recognizing even new dIsks, taking it in tomorrow for a D-Drive. Is there a 1310 Series installation disk for Windows 7? My All-in-One is actually year 2004 , 1315xi, and when I bought it, only the Series disk would install it. The printing and copying equipment works so well that I do not want to buy a new printer. Would I have to first UnInstall the whole thing to use new installation disk to include Scanning? Thanks in Advance.
This question was solved.
View Solution.You need to have the TWAIN driver for the 1315xi in order to use the scanner.
There is no Windows 7 scanner software available from HP.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee. -
I have lost my iMovie program and I can not install a new one. My computer says that it is not possible to download anything on my main drive
How full is your drive? You need at least 10/15% of free space.
-
Apparently a recent update did not install correctly and we get a message: Service (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start systen services, How do we fix this?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
i recently have ipad but before i sell it i made a back up of it and by an iphone when i put all the date on my iphone some files and software did not install is there anything i can do to recover the lost data? please help
I don't think you're on iOS 5, I think you're using iOS 6. That's the latest version.
Unless you've used iCloud to back up your documents, you won't be able to restore them. And for future reference, you don't have to uninstall Pages to update your iPad anymore. Sorry about this. -
While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?
The installer should have gone into your Apple Software Update folder:
C:\USERS\<user name>\AppData\Local\Apple\Apple Software Update
Right mouse click the msi file and select INSTALL -
Media Encoder update 4.1 did not install correctly?
I updated Production Premium package to 4.1 when it became available, 31. May.
Now when I check updates, Adobe Media Encoder 4.1 update is still on a list. Somehow it did not install correctly.
It is working OK and version shows 4.1.0.107.
The only problem so far I've noticed is not connected to AME but Premiere: it do not accept .VOB files.
Similar hardware (PC) / software combinations are working OK with other collagues here in our studio.
If I install the AME update again, after downloading and installation "The updating process is finished"
prompt pops up, but the update installation is not complete.
What is preventing AME to install correctly?
Just now I can not uninstall the complete package.First thank you Harm for trying to help.
I'm just learning to use this forum. Your most useful hint was on another thread, and
I could not give you points there. I've also found many of your other posts useful in these forums.
Thanks for those as well.
And because this is Premiere forum I prefer not to hassle with my After Effects problems here.
But no, I don't get full interface at all, just usual MS error message: "Color Finesse has encountered a problem and needs to close..."
I think the most apparent reason is my heavy project, vast amount of material, lots of HD compositions and only 32 bit XP with 4 Gigs of RAM.
When I tried to make a new HD project with less material, Color Finesse's full interface opened just fine.
And because my project's color correction needs were simple foreground to background balancing for bluescreen shots, I managed to do it with Levels.
Maybe you are looking for
-
even when typing this, my cursor got stuck for a few seconds and then characters appeared
-
Queue Concurrent Processing using PL/SQL notification
I have a queue that I need to have the processing done concurrently no matter how many messages are in the queue. Currently one 1 message is processed at a time, but I need at least 10 processed at once. Each message could take up to 3 minutes to p
-
Getting a error when trying to launch brtools
Hi all, Could anyone please help getting the following error while trying to launch brtools. ukbsfspg:tnxadm 35> brtools BR0651I BRTOOLS 7.00 (32) BR0252E Function stat() failed for '/usr/sap/TNX/SYS/exe/run/brarchive' at location BrFileStatGet-1 BR0
-
ABAP statement for deleting the content of a infocube
Hello, does someone know a abap statement or Babi to delete all data from a info cube?
-
Outlook (Outlook Web Access) to Prompt on Logon
I have a system that automaticly logs into Windows 2008 R2. I would set Outlook Web Access to prompt at logon. That way I can logon as a different user