IMOVIE 10.0.2 - Shared it via file then sent that to my iPhone ; the 13ses movie is OUT OF FOCUS ! HELP

IMOVIE 10.0.2 - I created a short movie and sharing it via file then sending it to my phone ! however once my iPhone receives it and I watch the movie on my iPhone its out of focus and blurry ! I been trying to figure out why and fix the problem !

Hey, Clinton,
     Thanks for your help!  I was able to go to iMovie 9.0.9 and import video.  I was still curious as to why it didn't work in version 10.0.2, so I contacted Apple tech support.  They were't sure at first as to why it wouldn't work, so they had me delete iMovie 10.0.2 and then re-install it just to see if something had gone wrong when it upgraded.  That didn't change anything.  In the end, they determined that 10.0.2 doesn't support the Hollywood Dazzle DV bridge.  But I have a workaround path from them that I will share so that it's possible to import to 9.0.9, then move it to 10.0.2. 
     1.  Open iMovie 9 (finder/applications/iMovie 9.0.9
     2.  Import from Dazzle Bridge to iMovie 9, note which event you are importing the clips into
     3.  Close iMovie 9
     4.  Open iMovie 10 (probably in the dock)
     5.  File/Import Media...navigate to home(this was my name, on the left side of iMovie, under Favorites)/Movies/iMovie events.  Find the event folder that contains your Dazzle clips (tip-try sorting by date modified to look at recent events.) 
     6.  Select the clips and import.  Click the blue "Import Selected" button on the bottom right.
You may get a message that some files cannot be imported.  Click continue import.  It's a little glitchy.  It imports your clip, and also makes a copy of it, too.  On the copy, the audio is normal, but the video is choppy.  In any case, you would delete the copy, anyway.
Hope this additional information helps somebody else.  Thanks again, Clinton for helping me!

Similar Messages

  • I am trying to move my itunes library from my old pc to my new imac, home sharing is on and I can see the shared library.  My problem is that when I check the shared library to import it to my imac I cannot import it.  Can anyone help me?

    I am trying to move my itunes library from my old pc to my new imac, home sharing is on and I can see the shared library.  My problem is that when I check the shared library to import it to my imac I cannot import it.  Can anyone help me?

    You need to transfer the iTunes Library from the most recent backup you made before the hard drive was replaced.
    You can't transfer the full iTunes Library from the iPad back to iTunes.
    There are third-party Windows applications that will transfer data from an iOS device, but they don't re-create the iTunes Library exactly as it was before.

  • I rented a movie on my iPad but cannot move it to my computer to watch on tv via Apple tv. How do I transfer the rented movie to my computer?

    I rented a movie on my iPad but cannot move it to my computer to watch on tv via Apple tv. How do I transfer the rented movie to my computer?

    I just rented a movie from my iPad2 and tried to play it through my ATV2 with AirPlay and same problem.... This is absurd guys. Apple I know there are copyright hoops to jump through but come on!! The whole pitch behind AirPlay and AppleTV was to make it easy to watch my purchases on my TV no matter what device they were on. Now I've got to hold my iPad in front of my face to watch a movie for nearly 3 hours!! And when I go to the support site I have no option other than to send an email to billing, screw this. I've not bought a DVD since I purchased my ATV2 over a year ago but if you guys are gonna pull this crap then what incentive do I have to continue the use of something that may or may not work the way it was advertised.
    By the way, this is the first time I've had this problem because I normally rent straight off the ATV or my computer, which by the way I was considering replacing my PC with an iPad but looks like you guys aren't ready for me to make that kind of a switch.
    Don't tell us that a product will do XY and Z then put limits on Y sending to Z.
    FIX THIS!!!

  • Can't upload file to Sharepoint "The URL is invalid. It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.

    Hello,
    I do database/SharePoint upgrades for SQL and or SharePoint or moving to new servers frequently.  In a nutshell, I backup the database (run the upgrade tools if necessary), load new server and sql software and restore the db, load but
    not configure SharePoint, and add the content db that was resotred through powershell.  I have never had any big issues with this before.  This time, I have done this same procedure as there is a new domain and new server.  Server and
    SQL 2008R2 and SharePoint 2010 on both old and new servers - just new server and new domain.  I have done this twice now (as it is a virtual server) and I have the same issue.  I can't check anything in or upload anything new.  I get the error
    - The URL '<path to the file and filename>' is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.  I have made sure
    that my database and log files are on a drive that has plenty of space (db is not restricted to grow).  I have made sure my database is not locked.  I have checked to see that I don't have version in my indexed columns in that library (I
    don't have any).  I have checked that my recycle bin is on in central admin.  I am not using RBS.  I have turned on verbose logging and found the following when I searched on the correlation ID from the error message - it is saying invalid
    column name extension.  I am not sure what to do at this point.  I can see there is a column in SQL called extension in the AllDocs table. Thanks.
    09/16/2014 10:41:44.84  w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     Logging Correlation Data       xmnv Medium   Name=Request (POST:http://sqlsp:80/disc/_layouts/checkin.aspx?List=%7B5219EA15-A36A-4162-A188-4B8D518D7E79%7D&FileName=%2Fdisc%2FJigs%20and%20Fixtures%2FJigs%20and%20Fixtures%2FAssembly%2F30%20Assembly%2DGeneral%2FJ30XXA50%2D00%2Easm&IsDlg=1) 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:44.85  w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     Logging Correlation Data       xmnv Medium   Site=/ 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:45.01  w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     Database                       d0d6 High     System.Data.SqlClient.SqlException: Invalid column name 'Extension'.    
    at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)     at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser.Run(RunBehavior
    runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)     at System.Data.SqlClient.SqlDataReader.HasMoreResults()     at System.Data.SqlClient.SqlDataReader.NextResult()    
    at Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean retryfordeadlock)     at Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordeadlock) 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:45.01  w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     Database                       d0d6 High     System.Data.SqlClient.SqlException: Invalid column name 'Extension'.    
    at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)     at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser.Run(RunBehavior
    runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)     at System.Data.SqlClient.SqlDataReader.HasMoreResults()     at System.Data.SqlClient.SqlDataReader.NextResult()    
    at Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean retryfordeadlock)     at Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordeadlock) 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:45.01  w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     General                        8kh7 High     The URL 'Jigs and Fixtures/Jigs and Fixtures/Assembly/30 Assembly-General/J30XXA50-00.asm'
    is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web. 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:45.01  w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     General                        9mpn High     File exception: Microsoft.SharePoint.SPException: The URL 'Jigs and
    Fixtures/Jigs and Fixtures/Assembly/30 Assembly-General/J30XXA50-00.asm' is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web. ---> System.Runtime.InteropServices.COMException
    (0x81020030): The URL 'Jigs and Fixtures/Jigs and Fixtures/Assembly/30 Assembly-General/J30XXA50-00.asm' is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.    
    at Microsoft.SharePoint.Library.SPRequestInternalClass.CheckInFile(String bstrUrl, String bstrWebRelativeUrl, Int32 iCheckinType, String bstrCheckinComment, Boolean bIsMigrate, Int32 iEditorId, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafe... 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:45.01* w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     General                        9mpn High     ...ArrayWriter pUniqueFieldCallback)     at Microsoft.SharePoint.Library.SPRequest.CheckInFile(String
    bstrUrl, String bstrWebRelativeUrl, Int32 iCheckinType, String bstrCheckinComment, Boolean bIsMigrate, Int32 iEditorId, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback)     --- End of inner exception
    stack trace ---     at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)     at Microsoft.SharePoint.Library.SPRequest.CheckInFile(String bstrUrl, String bstrWebRelativeUrl, Int32 iCheckinType, String
    bstrCheckinComment, Boolean bIsMigrate, Int32 iEditorId, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback)     at Microsoft.SharePoint.SPFile.CheckIn(String comment, SPCheckinType checkInType, Boolean
    b... 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:45.01* w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     General                        9mpn High     ...IsMigrate, SPUser modifiedBy) 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:45.01  w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     Runtime                        tkau Unexpected System.Runtime.InteropServices.COMException: The URL 'Jigs and Fixtures/Jigs and
    Fixtures/Assembly/30 Assembly-General/J30XXA50-00.asm' is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.    at Microsoft.SharePoint.Library.SPRequestInternalClass.CheckInFile(String
    bstrUrl, String bstrWebRelativeUrl, Int32 iCheckinType, String bstrCheckinComment, Boolean bIsMigrate, Int32 iEditorId, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback)     at Microsoft.SharePoint.Library.SPRequest.CheckInFile(String
    bstrUrl, String bstrWebRelativeUrl, Int32 iCheckinType, String bstrCheckinComment, Boolean bIsMigrate, Int32 iEditorId, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter ... 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:45.01* w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     Runtime                        tkau Unexpected ...pUniqueFieldCallback) 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:45.03  w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     Monitoring                     b4ly Medium   Leaving Monitored Scope (Request (POST:http://sqlsp:80/disc/_layouts/checkin.aspx?List=%7B5219EA15-A36A-4162-A188-4B8D518D7E79%7D&FileName=%2Fdisc%2FJigs%20and%20Fixtures%2FJigs%20and%20Fixtures%2FAssembly%2F30%20Assembly%2DGeneral%2FJ30XXA50%2D00%2Easm&IsDlg=1)).
    Execution Time=182.518658097607 88fb3615-c87c-4a7c-8e83-d63a551a9b8f

    I have fixed it.  I did a backup of the database and log file 2 times. I also did an upgrade-spcontentdatabase command in the sharepoint powershell.  Not sure why it worked, but I had read online about upgrade issues from WSS2 to WSS3 to 2010
    and I thought maybe something did not fully get upgraded even though this has been in use for 2 years since the upgrade.

  • The URL is invalid. It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.

    Hi all, 
    I'm having this issue on all document libraries when editing its properties, and it is also happening when creating new sub site (when it tries to provision the homepage). This issue is happening in a site collection that was migrated from a SharePoint 2010
    environment. 
    I have investigated every single error message, and none of the search results I found on the web helped, including the issue with having multiple column names mapped to the same database name ("@tp_Editor" error below). The file exists and it
    gets added to the document library but it fails when updating it's properties. 
    Here is logs from the ULS logs related to this issue:
    <nativehr>0x81020030</nativehr><nativestack></nativestack>The URL 'test/sdfsdfsdf.docx' is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.
    SPRequest.AddOrUpdateItem: UserPrincipalName=i:0).w|s-1-5-21-1739618301-713299677-2434533842-6675, AppPrincipalName= ,bstrUrl....
    Non-version conflict error in RunItemEventReceiverExProps.  Exception: Microsoft.SharePoint.SPException: The URL 'test/sdfsdfsdf.docx' is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the
    current Web. ---> System.Runtime.InteropServices.COMException: <nativehr>0x81020030</nativehr><nativestack></nativestack>The URL 'test/sdfsdfsdf.docx' is invalid.  It may refer to a nonexistent file or folder, or refer to a
    valid file or folder that is not in the current Web.    
     at Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String&
    pbstrGuid, Guid 
    Exception while assigning Document ID: The URL 'test/sdfsdfsdf.docx' is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.
    Failed to get output parameter, HR: 0x80131509, Native stack:
    [Forced due to logging gap, cached @ 01/31/2014 16:45:19.56, Original Level: Verbose] Invoking EventReceiver - [Id: {0}]
    System.Data.SqlClient.SqlException (0x80131904): Parameter '@tp_Editor' was supplied multiple times.    
     at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)    
     at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)    
    SQL error code from last error 8143 - Parameter '@tp_Editor' was supplied multiple times.
    <nativehr>0x81020030</nativehr><nativestack></nativestack>The URL 'test/sdfsdfsdf.docx' is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.
    SPRequest.AddOrUpdateItem: UserPrincipalName=i:0).w|s-1-5-21-1739618301-713299677-2434533842-6675, AppPrincipalName= ,bstrUrl=http://
    System.Runtime.InteropServices.COMException: The URL 'test/sdfsdfsdf.docx' is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.   
     at Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, 

    It sounds like you have an Event Receiver attached to your library that might be throwing an internal error and blocking the file from being uploaded. The following errors state that the file that SharePoint thought was uploaded actually wasn't. I would
    focus on what is happening within the event receiver.
    Dimitri Ayrapetov (MCSE: SharePoint)

  • The URL 'filename.xml' is invalid. It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current web

    Hi All,
    We have a form library with around 2000 InfoPath forms submitted successfully, but suddenly from the couple of weeks noticing that, the users are able to submit the form successfully without
    any issues but the referenced .xml file is physically not
    getting saved and the strange thing is it's reference(i.e. xml) is available. When we try opening the form it gives below error.<o:p></o:p>
    “InfoPath cannot open the following file ‘formpath/.xml’
    ”<o:p></o:p>
    When we try viewing the version history, it gives below error:<o:p></o:p>
    "The URL 'filename.xml' is invalid. It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current web"<o:p></o:p>
    I have also looked at the logs but not much information. Can someone help me?
    MercuryMan

    Hi,
    According to the error message, this issue is a typically database related issue.
    1. Make sure that your Content Database in SQL is not full.
    Open SQL management studio and connect to SQL server that have your content DB.
    You can find SQL server name from "manage servers in this farm".
    Right click the content database, click Reports > Standard Reports > Disk Usage to generate a standard report.
    For your reference:
    http://social.technet.microsoft.com/Forums/en-US/178095de-7fba-482c-9be1-94e60b1906e0/sharepoint-2010-error-the-url-item-url-is-invalid-it-may-refer-to-a-nonexistent-file-or
    2. According to KB 894631, this error message will be thrown out when the content database is configured to read-only.
    Go to Central Administration > Manage Content Databases and check if it is the case. Also, recycle the application pool in case the cache was corrupted.
    Thanks.
    Tracy Cai
    TechNet Community Support

  • Ok i have indesign CS6 and all files are stored on a 10.7.5 MAC server.  This just started happening.  When I open a file indesigns is creating a textfile in the same folder?  I need some help on this.

    Ok i have indesign CS6 and all files are stored on a 10.7.5 MAC server.  This just started happening.  When I open a file indesigns is creating a textfile in the same folder?  I need some help on this.

    Ask in the ID forum and be much more specific about your configuration. there could be any number of reasons why manifests, temp files or restore files are created.
    Mylenium

  • UCCX 8 - Dramatic change in the Create File Document step that is used by the Create XML Document step in order to read an XML file

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    For the last 5 years (and in IPCC3.x/4.x,UCCX/5.x/7.x) I've used the same basic subflow to read a XML document that contains holiday dates where the queue should be closed.  I've re-used this script on 20+ client installs and it's always worked.  The structure of the script allows you to pass the path and filename of the XML document as parameters to the subflow. (The document is in the repository)
    I loaded this script in UCCX 8.0.2 recently and it crashed with a Java.IO error.  It looked like it was trying to read the file system directly and not the repository. (In the Linux appliance model this kind of makes sense but why is the step trying to read the file system directly?)
    So I open a TAC case (SR# 615243125) and TAC tells me that the method of using the Create File Document step is not supported anymore and that I should specify the filename directly in the Create XML Document step
    The problem that I see (aside from having to edit all my scripts that use XML files) is that the Create XML Document step is looking for the input to be a type DOCUMENT and not a type STRING.  This seems to imply that I have to hardcode the document in each script that I deploy for a customer.  When it was a string it was easy to construct the full file path from parameters and pass to the subflow.
    Questions to the group
    #1 Am I missing something here?
    #2  Do you assume that you'll be able to load a script that worked fine in UCCX 7 into UCCX 8 and that it should completely function when you're doing everything according to the step reference documentation.
    #3 Cisco didn’t document this in any way that I can find.
    #4 How can you use the Create XML Document step in a fashion that would let you construct the path of the file and the filename previously in the script so you could pass it to a subflow ?  It would seem this functionality has been killed in UCCX 8
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    (Background)
    Create File Document Step
    The input filename is a STRING, could be an explicit path and filename in the repository or a variable that represents that path and string
    The output of this step is a DOCUMENT to be used in the Create XML Document step
    The string FILE_FullPathHolidayFiles references  en_us\folderName\documentName.xml
    The document was properly uploaded into the repository only, NOT trying to directly read c:\foo\blah…
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    The create XML document input can only be a type DOCUMENT

    #1 Am I missing something here?
    You are mixing two different issues together here.
    The Create File Document step is indeed not needed or supported for creating an XML document. That is why there is a unique step; to trigger XML parsing within the MIVR subsystem.
    Accessing the file system is restricted to a single folder within the VOS model (i.e. 8.0+). This folder is not backed up, replicated, or cleaned up automatically. It was intended to give developers some FS access as a temporary swap location only.
    #2  Do you assume that you'll be able to load a script that
    worked fine in UCCX 7 into UCCX 8 and that it should completely
    function when you're doing everything according to the step reference
    documentation.
    Assume nothing; read the documentation and attend one of the dozens of partner training sessions that CCBU put on advising of the upcoming changes.
    #3 Cisco didn’t document this in any way that I can find.
    You're right, I guess, on the Create File vs. XML Document step. AFAIK Cisco never wrote a notice into the Step Reference Guide explicitly stating that you cannot use the Create File Document although the documentation seemed pretty clear to me without it. File system restrictions are documented in the 8.0 release notes.
    Scripting and Development Series: Volume 2, Editor Step ReferenceUse the Create XML Document step to create a logical document that maps a document to another document variable (where the document has already been pre-parsed as an XML document and is ready to be accessed by the Get XML Document Data step).Use this step before the Get XML Document Data step to obtain data from a document formatted using the Extensible Markup Language (XML).
    #4 How can you use the Create XML Document step in a fashion that would
    let you construct the path of the file and the filename previously in
    the script so you could pass it to a subflow ?  It would seem this functionality has been killed in UCCX 8
    No it hasn't; just concatinate a string to build the Source Document parameter the step needs. Example:  "DOC[" + myFilePath + "]"

  • When downloading a file, I select "Save File", but I'm unable to check the box label "Do this automatically for files like this from now on." The box is faded out. It's very tedious when you have to select "Save File" everytime

    Click on the file to download
    The "Open" Dialog Box pops up
    Select "Save File"
    Try to click on the box labeled ""Do this automatically for files like this from now on."
    The box is disable

    Hello melanie90, see : [https://support.mozilla.org/en-US/kb/change-firefox-behavior-when-open-file#w_changing-download-actions Changing download actions]
    thank you

  • Why can I no longer open jpeg files in camera raw in CS2? The option is grayed out in Bridge

    I was forced to download CS2 from the web after Adobe stopped allowing me to register it from my disks and now I can no longer open files in camera raw. Am I missing something?

    As far as i know, photoshop cs2 and adobe bridge 1 (cs2) could not open jpegs or tiffs into camera raw, only camera raw files.
    I believe photoshop cs3 was the first version to allow jpegs to be opened in camera raw.
    Are you sure you had photoshop cs2 before?
    If on the other hand, you can't open camera raw files that you used to be able to open, then you probably just need to update the camera raw plugin to version 3.7
    windows
    Adobe - Photoshop : For Windows : Camera Raw 3.7 update
    mac
    Adobe - Photoshop : For Macintosh : Camera Raw 3.7 update

  • Time Machine: i had a problem with removing old files from trash, that is fixed and the whole reason was to make time machine work. It has been backing up for day and one half. What should I do??

    trash problem resolved. Now time machine is acting up. it has been backing up since yesterday

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Copy the words "Starting standard backup" (without the quotes) on this page and paste into the String Matching text field. Note the timestamp of the last message shown. Clear the text field and scroll back in the log to that time. Post the messages timestamped from then until the end of the backup, or the end of the log if that's not clear.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    Some personal information, such as the names of your files, may be included — edit that out, too, but don’t remove the context.

  • The execution file is too large in ipa,but the swf file is not that big, even with the air runtime.

    Hi,could some one tell me why does this happend.
    the size of the main swf is 16M,named "Loading.swf", when packaging to ipa (target: ipa-app-store), the execution file(named "Loading")  in the ipa is turn to the size of 41M , I know it will intergrate with the whole air runtime into the main executing file, 41-16=25M, but the size of air runtime is far smaller than 25M.
    when comress this exection file info a zip file, the size after compressed is 26M, why,help?
    Thanks in advance.

    Has this ever been resolved?  We are having a similar issue.
    Thanks!

  • Can a spool file be sent as an attachment in the decision step?

    Hi,
    I have z program that runs in background and produces a spool file. Normally, I can use tcode SP01 to display this file. At the end of this z program, I call SWW_WI_START_SIMPLE to send a workflow into SAP inbox. I want to know if I somhow can send the spool file along also? I read about attachment and SOFM object but still can't figure out what I need to do yet. Please help.
    Thank you,
    TH

    Hi Th,
    Check this code if helpful.
    FORM pdf_conversion.
      CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
           EXPORTING
                src_spoolid              = spoolno
                no_dialog                = ' '
           IMPORTING
                pdf_bytecount            = numbytes
                pdf_spoolid              = pdfspoolid
                btc_jobname              = jobname
                btc_jobcount             = jobcount
           TABLES
                pdf                      = pdf
           EXCEPTIONS
                err_no_abap_spooljob     = 1
                err_no_spooljob          = 2
                err_no_permission        = 3
                err_conv_not_possible    = 4
                err_bad_destdevice       = 5
                user_cancelled           = 6
                err_spoolerror           = 7
                err_temseerror           = 8
                err_btcjob_open_failed   = 9
                err_btcjob_submit_failed = 10
                err_btcjob_close_failed  = 11.
    ENDFORM.                    " PDF_CONVERSION
          FORM SPOOL                                                    *
    FORM spool.
      PERFORM display.
      CALL FUNCTION 'GET_PRINT_PARAMETERS'
           EXPORTING
               destination            = 'LOCL'
                immediately            = ' '
                new_list_id            = 'X'
                expiration             = '9'
                in_parameters          = p_pripar
                layout                 = 'X_65_132'
                line_count             = 65
                line_size              = 132
                mode                   = 'DEFVALS'
                no_dialog              = 'X'
           IMPORTING
                out_parameters         = p_pripar
                valid                  = val
           EXCEPTIONS
                archive_info_not_found = 1
                invalid_print_params   = 2
                invalid_archive_params = 3
                OTHERS                 = 4.
      NEW-PAGE PRINT ON NEW-SECTION PARAMETERS p_pripar NO DIALOG.
      PERFORM display.
      NEW-PAGE PRINT OFF.
      CLEAR t_filename_tx.
      CONCATENATE 'c:\temp\' p_mat '.pdf' INTO t_filename_tx.
      CONDENSE t_filename_tx.
      SELECT * FROM tsp01 INTO TABLE t_tsp01
           WHERE rqowner EQ sy-uname.
      SORT t_tsp01  BY rqcretime DESCENDING.
      LOOP AT t_tsp01.
        spoolno = t_tsp01-rqident.
        EXIT.
      ENDLOOP.
      IF sy-subrc EQ 0.
        PERFORM pdf_conversion.
      ENDIF.
    sending that inernal to mail
    FUNCTION z_p_traveler_workflow.
    ""Local interface:
    *"  IMPORTING
    *"     REFERENCE(V_FILE_PATH) LIKE  RLGRAP-FILENAME
    *"     REFERENCE(DOKNR) LIKE  CRVD_A-DOKNR
    *"     REFERENCE(DOKVR) LIKE  CRVD_A-DOKVR
    *"  TABLES
    *"      PDF STRUCTURE  TLINE
    D A T A
      DATA: w_gd_doc_data LIKE sodocchgi1.
    internal table for body content of the email
      DATA: t_message LIKE solisti1 OCCURS 0 WITH HEADER LINE.
    internal table for receivers of email
      DATA: t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
    internal table for attachment data
      DATA: t_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE.
    *internal table for Information about structure of data tables
      DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
    internal tables for attachment data
      DATA: t_xi_pdf LIKE tline OCCURS 0  WITH HEADER LINE,
            t_xi_temp LIKE bapiqcmime OCCURS 0  WITH HEADER LINE,
            t_xi_mime(255) TYPE c OCCURS 0  WITH HEADER LINE,
            t_html LIKE solisti1   OCCURS 0  WITH HEADER LINE.
    for splitting of the filepath
      DATA : BEGIN OF t_split OCCURS 0,
                row(50),
             END OF t_split.
      DATA:  w_tab_lines LIKE sy-tabix,
             w_subject TYPE so_obj_des,                " for email header
             w_file_path1 TYPE string.                 "file path
      DATA : w_lines       TYPE i,
             w_temp(500)   TYPE c,
             w_offset      TYPE p,
             w_lineslen(2) TYPE p,
             w_mimelen(2)  TYPE p,
             w_tabix       LIKE sy-tabix.
      DATA : w_len      TYPE i,
             w_index    LIKE sy-index,
             w_doc_type TYPE  so_obj_tp,
             w_filename TYPE  so_obj_des .
    internal table for gettting personal numbers of quality engineers
      DATA: BEGIN OF t_ztptwf2 OCCURS 0,
            pernr LIKE ztptwf2-pernr,        "personal number
            END OF t_ztptwf2.
    internal table for gettting userids of quality engineers
      DATA: BEGIN OF t_pa0105 OCCURS 0,
            usrid LIKE pa0105-usrid,       " user id of the quality engineer
            END OF t_pa0105.
    move file path to w_file_path
      w_file_path1 = v_file_path.
    *assign subject of the email
      w_subject = text-006.                  "Travaler Document to Approve
    refreshing the internal tables
      REFRESH : t_objbin, t_packing_list, t_split.
      CLEAR   : t_objbin, t_packing_list, t_split.
      CLEAR   : t_xi_pdf, t_xi_temp.
      REFRESH : t_xi_pdf, t_xi_temp.
      CLEAR: w_temp, w_offset, t_xi_temp.
    move attachment data to t_xi_pdf[].
      t_xi_pdf[] = pdf[].
    Reformat the line to 255 characters wide
      DESCRIBE TABLE t_xi_pdf   LINES  w_lines.
      DESCRIBE FIELD t_xi_pdf   LENGTH w_lineslen.
      DESCRIBE FIELD t_xi_temp  LENGTH w_mimelen.
      LOOP AT t_xi_pdf.
        w_tabix = sy-tabix.
        MOVE t_xi_pdf TO w_temp+w_offset.
        IF w_tabix = w_lines.
          w_lineslen = strlen( t_xi_pdf ).
        ENDIF.
        w_offset = w_offset + w_lineslen.
        IF w_offset GE w_mimelen.
          CLEAR t_xi_temp.
          t_xi_temp = w_temp(w_mimelen).
          APPEND t_xi_temp.
          SHIFT w_temp BY w_mimelen PLACES.
          w_offset = w_offset - w_mimelen.
        ENDIF.
        IF w_tabix = w_lines.
          IF w_offset GT 0.
            CLEAR t_xi_temp.
            t_xi_temp = w_temp(w_offset).
            APPEND t_xi_temp.
          ENDIF.
        ENDIF.
      ENDLOOP.
    *move data from t_xi_temp to t_xi_mime
      LOOP AT t_xi_temp.
        t_xi_mime(255) = t_xi_temp-line.
        APPEND t_xi_mime.
        CLEAR  t_xi_mime.
      ENDLOOP.
    *move data from t_xi_mime[] to t_html[]
      t_html[] = t_xi_mime[].
    *move data from t_html[] to t_objbin.
      LOOP AT t_html.
        t_objbin-line = t_html-line.
        APPEND t_objbin.
        CLEAR t_objbin.
      ENDLOOP.
    *fill the body of email
      t_message = text-005.                        "Mail with PDF attachment
      APPEND t_message.
      CLEAR t_message.
      t_message = text-004.    "Please double click the attachment to verify
      APPEND t_message.
      CLEAR t_message.
      concatenate 'COPY FOR VIEWING ONLY-NOT TO BE'
              'USED/PRINTED FOR PRODUCTION' into t_message separated by
    space.
      APPEND t_message.
      CLEAR t_message.
      IF NOT doknr IS INITIAL.
        CONCATENATE text-001                     "The Document
                    doknr
                    text-002                     "and Version
                    dokvr
                    text-003 INTO                "is changed
                t_message SEPARATED BY space.
        APPEND t_message.
        CLEAR t_message.
      ENDIF.
      DESCRIBE TABLE t_message LINES w_tab_lines.
      READ     TABLE t_message INDEX w_tab_lines.
      w_gd_doc_data-doc_size = ( w_tab_lines - 1 ) *
                                               255 + STRLEN( t_message ).
      w_gd_doc_data-obj_langu  = sy-langu.
      w_gd_doc_data-obj_name   = 'SENDFILE'.
      w_gd_doc_data-obj_descr  = w_subject.
      w_gd_doc_data-sensitivty = 'O'.
      CLEAR t_packing_list.
      t_packing_list-head_start = 1.
      t_packing_list-head_num   = 0.
      t_packing_list-body_start = 1.
      t_packing_list-doc_type   = 'RAW'.
      t_packing_list-body_num   = w_tab_lines.
      APPEND t_packing_list.
      IF NOT w_file_path1 IS INITIAL.
        w_len = strlen( w_file_path1 ) - 3.
        w_doc_type = w_file_path1+w_len(3) .
        TRANSLATE w_doc_type TO UPPER CASE .
        SPLIT w_file_path1 AT '\' INTO TABLE t_split .
        DESCRIBE TABLE t_split LINES w_index .
        READ TABLE t_split INDEX w_index .
        w_filename = t_split-row .
        w_len = strlen( w_filename ) - 4.
        w_filename = w_filename(w_len) .
        DESCRIBE TABLE t_objbin LINES w_tab_lines.
        t_packing_list-transf_bin = 'X'.
        t_packing_list-head_start = 1.
        t_packing_list-head_num   = 1.
        t_packing_list-body_start = 1.
        t_packing_list-doc_type   = w_doc_type.
        t_packing_list-body_num   = w_tab_lines.
        t_packing_list-doc_size   = w_tab_lines * 255.
        t_packing_list-obj_descr  = w_filename.
        APPEND t_packing_list.
      ENDIF.
    fill the Receivers
      SELECT * FROM ztptwf2 INTO TABLE t_ztptwf2.
      IF NOT t_ztptwf2[] IS INITIAL.
        SELECT usrid FROM pa0105 INTO TABLE t_pa0105 FOR ALL ENTRIES IN
      t_ztptwf2 WHERE pernr = t_ztptwf2-pernr AND subty = '0001' .
        LOOP AT t_pa0105.
          t_receivers-receiver = t_pa0105-usrid.
          t_receivers-rec_type = 'B'.
          APPEND t_receivers .
          CLEAR t_receivers.
        ENDLOOP.
      ENDIF.
      IF  NOT t_receivers[] IS INITIAL.
    Call the FM to post the message to SAPMAIL
        CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
             EXPORTING
                  document_data              = w_gd_doc_data
                  commit_work                = 'X'
             TABLES
                  packing_list               = t_packing_list
                  contents_txt               = t_message
                  contents_bin               = t_objbin
                  receivers                  = t_receivers
             EXCEPTIONS
                  too_many_receivers         = 1
                  document_not_sent          = 2
                  document_type_not_exist    = 3
                  operation_no_authorization = 4
                  parameter_error            = 5
                  x_error                    = 6
                  enqueue_error              = 7
                  OTHERS                     = 8.
      ENDIF.
      FREE: t_objbin,t_message,t_packing_list,t_receivers.
    i hope this code will solve your problem.
    Sankar

  • R3D File Format Not Supported (even after downloading the REDCINE-X plugin) . . . Help!

    So I'm currently attempting to import my RED footage into Premier CS4.
    I've all ready downloaded the Redcine-X plugin for Premier Pro.
    The Problem(s):
    (1) My media browser acknowledges the file however, it won't play in my
    preview window nor will it import. 
    (2) I'm not given the RED Format Preset in my New Sequence window
    when I attempt to make a new sequence. 
    I was wondering if anyone knows any solutions and could possibly help
    me out, thoughts?

    installing REDCINE-X won't do anything for CS4.
    you need a CS4 plugin:
    REDCODE CS4 Win 1.3.msi
    SUMMARY: Provides native REDCODE media (R3D) support for
    Premiere Pro CS4 (4.0.1 and later) and After Effects CS4 (9.0.1 and later).
    Includes: REDCODE importer (v1.3.0), After Effects Settings Dialog
    and workflow guide. Note: Supports RED ONE cameras up through Build 18.
    unfortunately, it seems to be gone from the RED site.
    hahahahahahaha!!!

  • When I want to update my 4g iPod but when it says "procesing file" an error pop up and says "the time has runned out, please check your internet connection or try again later"

    I have the iOS 4.1.3 and I want to pudate it but I have tried this 10 time but the result is always the same, what can I do? If this useful the # of error is 3259

    So you disabled both the firewall and antivirus?
    You can try a manul update/restore using the instructions here:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

Maybe you are looking for