IMovie 10.0 export problems

I am trying to export/share to film a 1 hr imovie presentation.  When exported about half of the clip audios are only static.  These problems are after the first 38 minutes.  However there are a number of clips in this time that have the proper audio that goes with the clips.  I have tried to export/share  a few of the affected clips in a separate movie and the audio is fine when I do that.  Has anyone had this same problem?  Not sure if it is in the clips or the rendering.
Thanks

Thank you so much QuickTimeKirk - there are times when the obvious eludes me!

Similar Messages

  • IMovie full quality export problem...

    Hello,
    I filmed a widescreen video with a mini dv cam, which runs flawlessly smooth and clear as a bell at full screen in iMovie... but when I export it in either a full quality .dv, or the highest quality .mov and play them at nearly full screen in Quicktime, the playback is choppy.
    How do I export a copy of my video that plays as smooth as it does in iMovie?
    Thanks!

    I am using the expert settings for quicktime export
    If you want full quality, then you must use the Full Quality preset.
    The expert settings don't export full quality even if you choose .dv output:
    http://www.sjoki.uta.fi/~shmhav/iMovieHD_6_bugs.html#expertsettings
    But that doesn't fully explain your original problem, though.
    Disclaimer: I don't benefit from the link.

  • Imovie to fb exporting problems

    Im trying to share an imovie video to FB but gives incorrect user name or password error, and I already verified that the info is correct. What can I do?

    See my reply in your later thread:
    https://discussions.apple.com/thread/4273960?tstart=0

  • IMovie'08 export problem

    I'm running into a problem with iMovie'08.
    I developed a QuickTime component for importing our internal format video into iMovie. It works well with iMovie HD. But when I import my video into iMovie'08 and export it to 3gp or m4v file, I find the video lost(the audio is cerrect ).
    I can build movie and preview it correctly, and I'm sure my 'imdc' component put out pictures, but the exported video is black.
    The ElectricImageComponent, Apple's sample code, got the same problem.
    I don't know what changes were made in iMovie'08 exporting process.
    I need help!

    Welcome saintsdabu05 to the  iMovie boards ..
    iMovie is no all-purpose-editor. .. it is meant by concept to import from camcorders.. which mostly use dv, ADVHD or mp2 as codecs ..
    .avi is just a container, some say wrapper.. can contain all kind of codecs.. some codecs show this weird effect: imports fine into iM08, but on export no pic.
    convert your flv into 'dv-stream' and off you go ..
    hint for future use:
    try to be more discriptive in your topic line.. 80% of posts here are 'emergency calls' ...

  • IPhone 4 to iMovie to ATV2 Export options

    What is the best way to export a movie shot on iphone4 edited in iMovie 11 and exported to ATV2?  I see the share feature but it does not seem to have HD which I though iPhone 4 did??
    Help please. Thanks

    AAAaaand still nothing. 
    Okay, a little update for me: i updated to iOS 7 (and despite severeal reviews I've read, it actually runs pretty darn good on this older model phone, better than iOS 6 in most ways, only a video lag issue that I was expecting from the reviews, but not as bad as many claimed, and everything else the reviewers were wrong about), and today got it's bugfix update.  Mainly I just wanted to see if the itunes transfer of Pages files to Word files suddenly decided to start working.  Nope, it didn't.
    Another thing I've tried, before and after the update, is e-mailing the files rather than transferring through itunes.  It was a vain hope, but my thought was maybe itunes was corrupting the files in some way.  Well, my story is a little longer now, and the 10 pages of gobbledegook is now 15.  E-mail made no difference.
    One thing I have not mentioned is exporting the files in .pdf format, that has always worked beautifully.  Problem is, I can't easily edit those files.  The easiest way is to copy and paste the body of the document into a word file, but after that I have to reset all of the carriage returns, and some spacings (mostly the double space after a period, exclamation point, or question mark; it gets turned to a single space).
    This is why I want the export to .doc to work, so I don't have to constanly re-edit after just switching the file between computers (i do regard the iphone as a computer with a phone built in).  Why doesn't it work?  Can it be fixed?  How?  Of the, at this point, 79 views, someone must have an idea of what to do?

  • IMovie can not export

    I use iMovie to create stop motion video, but when I hit "export movie" and wait for about 3 minutes.
    After it finish export movie, I can not find that file (.mov) in my Mac.
    How to solve that problem?

    Then I would go trough my list of troubleshootings.
    *Not knowing the origin to Your problem - General approach when in trouble is as follows.*
    • Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
    • Delete iMovie pref file
    iMovie pref file resides.
    Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
    and is named. (one or more of these)
    com.apple.iMovie.plist
    com.apple.iMovie3.plist
    com.apple.iMovie7.plist
    com.apple.iMovie8.plist
    and find
    com.apple.iApps.plist
    While iMovie is NOT RUNNING - move this/these file/s out on to desk-top.
    Now restart iMovie.
    • Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
    • Garageband-fix. Start it, Play a note and Close it. Re-try (Corrects an audio problem that hinders iMovie)
    • Screen must be set to Million-colors
    • Turn off Mac and disconnect Mains/Power for 20-30 minutes - will at least re-set FW-port
    • Third party plug-ins that doesn't work OK (not relevant for iMovie’08 or 09)
    • Problems in iPhoto Library can affect iMovie to crash on start-up. Re-build this first then try to re-start iMovie.
    This You do by
    _ close iPhoto
    _ on start up of iPhoto - Keep {cmd and alt-keys down}
    _ now select all five options presented
    _ WAIT a long long time
    • iMovie updated ?
    • QuickTime updated ?
    • Mac OS version ?
    • Program miss-match. iMovie 4 - will not work under Leopard
    • Program miss-match. iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
    • Program miss-match. iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (will work under Leopard and Snow-Leopard)
    • Program miss-match. iMovie’08 v. 7.1.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (will work under Leopard and Snow-Leopard)
    • Program miss-match. iMovie’09 v. 8.0.6, Mac OS X.5.8 AND QuickTime 7.6.4 - is OK (will work under Leopard and Snow-Leopard)
    From LKN 1935. (in this case = iMovie HD (5), I tried it all, but nothing worked.
    Your answer (above) has been helpfull insofar as all the different trials led to the conclusion that
    there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
    iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
    to my Sony camcorders worked properly as it did before.
    Lennart Thelander
    I run "Cache Out X", clear out all caches and restarts the Mac.
    Yours Bengt W

  • Keynote export problem

    I am trying to export a keynote project with an imported GB soundtrack to itunes so I can burn it to a disk. I follow the instructions but only the first slide gets exported. What do I need to do?

    Ok, I fixed the problem.  I exported the Keynote presentation as a Quicktime video.  It had the glitched slide, that didn't display right.  I imported the movie into iMovie.  I exported the one slide as a picture file, and then in iMovie, I pasted the picture into the position where the slide was missing.  That only took me a day to come up with.  Seems to have worked.  Hopefully someone will end up benefiting from this.
    SrMac

  • Imovie: i am having problems sizing my image

    imovie: i am having problems sizing my image when i convert the cells into a 'project'.
    I can see all the image in full, - until i drag it into project area, then in the view window the image is too large and is cut in half.
    i have adjusted the PAL size . large full view etc..
    I tired exporting and even when exported to quicktime, the image is cut in half.
    does anybody have any idea what the problem is?
    thanks

    Hello lucglobal68,
    The following article contains information regarding the options you have with cropping (or not cropping, if you'd like the entire image to show) images in iMovie.
    iMovie '11: Crop video clips or still images
    http://support.apple.com/kb/PH2232
    Cheers,
    Allen

  • Hi Expert , crystal report export problem. system not responding

    Hi,
    crystal report export problem. system not responding.
    Thanks
    Rajkumar Gupta

    Dear Raj,
    Please try this
              Try
                Dim oSubReport As CrystalDecisions.CrystalReports.Engine.SubreportObject
                Dim rptSubReportDoc As CrystalDecisions.CrystalReports.Engine.ReportDocument
                Dim rptView As New CrystalDecisions.Windows.Forms.CrystalReportViewer
                Dim rptPath As String = System.Windows.Forms.Application.StartupPath & "\" & rptName
                Dim rptDoc As New CrystalDecisions.CrystalReports.Engine.ReportDocument
                rptDoc.Load(rptPath)
                rptView.ShowExportButton = True
                rptView.ReportSource = rptDoc
                For Each oMainReportTable As CrystalDecisions.CrystalReports.Engine.Table In rptDoc.Database.Tables
                    oMainReportTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
                Next
                For Each rptSection As CrystalDecisions.CrystalReports.Engine.Section In rptDoc.ReportDefinition.Sections
                    For Each rptObject As CrystalDecisions.CrystalReports.Engine.ReportObject In rptSection.ReportObjects
                        If rptObject.Kind = CrystalDecisions.Shared.ReportObjectKind.SubreportObject Then
                            oSubReport = rptObject
                            rptSubReportDoc = oSubReport.OpenSubreport(oSubReport.SubreportName)
                            For Each oSubTable As CrystalDecisions.CrystalReports.Engine.Table In rptSubReportDoc.Database.Tables
                                oSubTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
                            Next
                        End If
                    Next
                Next
                'Setting Paper
                Dim rawKind As Integer = 0
                Dim printSet As New System.Drawing.Printing.PrinterSettings
                For i As Integer = 0 To printSet.PaperSizes.Count - 1
                    If printSet.PaperSizes.Item(i).PaperName.ToUpper = PaperName.ToUpper Then
                        rawKind = CInt(printSet.PaperSizes.Item(i).RawKind)
                        Exit For
                    End If
                Next
                Dim MyTest As New SaveFileDialog
                rptDoc.PrintOptions.PaperSize = CType(rawKind, CrystalDecisions.Shared.PaperSize)
                rptDoc.ExportToStream(ExportFormatType.Excel)
                'rptDoc.SaveAs("C:\TBKING.xls", True)
                '''How to export the report
                Try
                    Dim CrExportOptions As ExportOptions
                    Dim CrDiskFileDestinationOptions As New _
                    DiskFileDestinationOptions()
                    Dim rename As String
                    rename = rptName.Replace(".rpt", "")
                    Dim CrFormatTypeOptions As New ExcelFormatOptions
                    CrDiskFileDestinationOptions.DiskFileName = _
                                                "c:\Report\" & rename & "_Export_File.xls"
                    CrExportOptions = rptDoc.ExportOptions
                    With CrExportOptions
                        .ExportDestinationType = ExportDestinationType.DiskFile
                        .ExportFormatType = ExportFormatType.Excel
                        .DestinationOptions = CrDiskFileDestinationOptions
                        .FormatOptions = CrFormatTypeOptions
                    End With
                    rptDoc.Export()
                Catch ex As Exception
                    MsgBox(ex.ToString)
                End Try
                '' end by kevin shah
                rptView.Show()
                rptView.ShowExportButton = True
                Dim oFrm As New System.Windows.Forms.Form
                rptView.DisplayGroupTree = True
                rptView.Dock = System.Windows.Forms.DockStyle.Fill
                rptView.Location = New System.Drawing.Point(0, 0)
                oFrm.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
                oFrm.Controls.Add(rptView)
                oFrm.Name = "Report Viewer"
                oFrm.Text = "Report Viewer11"
                oFrm.ResumeLayout(True)
                oFrm.WindowState = System.Windows.Forms.FormWindowState.Maximized
                oFrm.TopMost = True
                oFrm.ShowDialog()
            Catch ex As Exception
                objMain.objApplication.MessageBox(ex.Message)
            End Try
    By pressing this button XLS file be generated on C:\report\
    Hope this will resolved the issue
    Thanks
    Kevin

  • How do I share a new project on imovie if the export option is greyed out and not an option?

    how do I share a new project on imovie if the export option is greyed out and not an option?

    nicoleking wrote:
    ... I heard that if you bring in your old iPhone, they will give you a new one with some kind of fee, but I don't know how that works.
    https://discussions.apple.com/message/22920500

  • CS4 Audio Export Problem

    Hi
    I'm fairly new to CS4 and have picked up an audio export problem, more than likely with a setting of sorts. For some reason when I export to MPEG2 -DVD via the Media Encoder, the video portion is fine as well as any audio that has been placed and edited on tracks audio 1 and 2 in PP. However, if there is additional audio placed on tracks 3 or 4 for example (say a music MP3 overlay) then this does not come out ... only audio placed on tracks 1 and 2 in PP come out. I have checked the obvious like making sure the tracks aren't muted etc but to no avail. Also tried changing from PCM audio to MPEG ... Stereo to 5.1 mixdown ... nothing doing.
    Any help would be greatly appreciated.
    Thanks and regards
    Videoman 1
    SA

    Thanks Harm ... got SnagIt and with a few helpful YouTube tutorials ... am in business. Hunt and John, also thanks ... the other method equally as good. Now, I have attempted to attach my screen shot which should display my CS4 timeline and associated audio monitor windows above. By the way, this was for a wedding and as indicated, you will notice an MP3 lying in audio track 3 which as mentioned is my problem as it is not audible after render via Media Encoder. But remember, the moment I slip this MP3 up into audio track 1 or 2 above ... problem solved. I know there must be something small like a setting gone wrong or incorrect. As mentioned, any help would greatly appreciated.
    Thanks to you all.
    Regards Paul ( Vryheid, South Africa )

  • Export Problem in LR 3.5

    Hi folks,
    I have been working with LR 2.7 for a while now and was happy with it.
    PC - Win XP - LR3.5
    Photo's stored on external hard disk (K:)
    The RAW captures of a Nikon 3100 I recently won were not being recognized/imported by LR 2.7 and I installed the 3.5 version to see if it was any better. I would have to buy it anyway by the time I switch to Win7. In 3.5 the Raw files were imported, the settings of 2.7 were nicely taken over but now and I cannot export the files I have worked on to the K: drive of the external hard drive as I used to do with 2.7.
    I get the message 'The folder could not be found' though it is set in the Export Window and I am looking at it in Win Explorer.
    The original RAW captures are on the D: drive but that was always the case with 2.7 as well... I am doing it exactly as I used to with 2.7.
    I tried with a photo from an older folder of my usual camera and everything works fine there.
    The problem seems to be only with the Nikon files. Now I start wondering if there is something with raw format of this Nikon camera that is putting LR in a twist...
    Anybody any ideas to help me out?
    Thanks and grts
    Nil

    @ web-weaver:
    Of course they go to a different folder and they also get different
    titels/names once processed in LR. The originals are always RAW (NEF) and I
    export them as jpg or tiff files depending on what more I will do to them.
    @ ssprengel:
    I get the message when I have renamed the file in the export window, set
    the folder it has to go to and hit export.
    In the 2.7 version I got it already when I tried to import.
    As I said, this only happens with the Nikon (NEF) RAW files. With the
    Olympus (ORF) RAW files I have no problem at all and had no problem in LR
    2.7 either.
    I cannot see anything wrong in the Export panel nor in Preferences.
    Plug in is Metadata Wrangler and has been updated to the latest version >
    no joy...
    I tried import/export with jpg files and no problem there.
    Yesss! Got it! What I had overlooked was a question mark next to the folder
    in Library (sooo small). A rightclick and telling LR where it was solved
    the problem. Strange, though, as it has never done this before... the main
    folder and the path are still the same as the ones that work perfectly with
    Olympus exports... just a different subfolder named Nikon and another named
    Test... Also strange that if I started off with jpg, it was no problem
    either...
    Anyway, thanks a lot for shaking my senses for me
    Nil
    2011/12/10 web-weaver <[email protected]>
       Re: Export Problem in LR 3.5  created by web-weaver<http://forums.adobe.com/people/web-weaver>in
    Photoshop Lightroom - View the full discussion<http://forums.adobe.com/message/4075999#4075999>

  • Export problems- it's renaming my MOVs to strange things and they're huge!

    Hey guys,
    strange fcp export problem. I have a 10 minute anim compressed fcp project, 1920x1080, 30fps on a top-of-the-range macbook pro with external terabyte HD. I did a test export a couple of days ago, because our deadline is really soon, and that all worked fine - a 10 minute quicktime, 100% anim codec, was 26GB. That was fine. I did another test clip, just a spinning bitmap for 10 mins, from AfterEffects with similar, succesful, results and file sizes.
    Now, however, when I export, it comes out as 60GB, and FCP changes the filename to something which is the first half of the filename I chose, and a strange number for the second half which is different each time I try it. Something like "filena#CF342.mov", for example. This file seems to have video in it OK, but it's 3 times the size, and the data rate is much higher, too high to play back.
    The only changes I've made since my successful test are replacing many of the low res previews with hi res versions, and adding 1 minute to the end. And I changed my QMaster setup, not sure if that's anything to do with it.
    Anyone got any ideas? I'm getting pretty worried.....
    thanks in advance....

    Thanks for the quick reply! No, don't think that's the problem. The new render doesn't have an alpha channel - it's Animation 100% Millions (not Millions+), and I don't think that would add more than 25% to the file size anyway. It also wouldn't account for the strange renaming of filenames. And the increase in length is only 10%. The file size has tripled!
    The final delivery format was going to be animation, 1920x280, because it's going to projected on a 30m wide cinema screen and live TV tomorrow night but our playback solution (while it handles the test files ok) can't handle the data rate of these strange new files: it's 800mb/s, which is pretty ridiculous.
    The renaming of the files suggests (to me at least) some kind of bug/error, but it doesn't report any kinda error in either fcp or quicktime.
    Plan B is to recompress the strange big file using h264 which gives an ok quality and is 10% of the size. Reason I'd like to do it animation is I need to do several versions with different gamma, so I need to do further processing on the rendered file after it's dumped from FCP.
    Any thoughts? I'd like to get to the bottom of this.
    one thought - I didn't tick "recompress all files" and some of the source DOES have alpha - would it be taking the alpha channel even though I didn't ask for it?

  • Export Problem Solved (new problem)

    I had posted earlier about export problem it was a silly mistake as i had kept hide extention on dats y it happened
    Now problem is when i export the exported video has some pixcels and it hangs in between dunno wats wrong

    What's a pixcel?
    Pixel?
    All video has pixels.
    Seriously, your question is completely incomprehensible.

  • CS4 Export Problem

    I have an external hard drive to which I export my encoded CS4 video files once I have finished editing.  The problem is that, in doing so, space seems to be used also on my C drive.  I need to find and delete these files on my C drive once my PP project files are rendered to my external drive.  I have looked in temp files but they not there.  Can anyone advise me on this?

    That's done it S.V.  Many thanks!
    Lewis B.
    Date: Mon, 13 Sep 2010 11:13:53 -0600
    From: [email protected]
    To: [email protected]
    Subject: CS4 Export Problem
    I'm a newbie so don't take my word as gospel buuuuttt....
    If you're using Vista you might be making the same mistake as me. Go edit>preferences>media, hover the mouse over the media cache files location (i.e. C:\yadayada) and TYPE that into the bar at the top of the my computer. Don't click through and try and find it, TYPE it like you would an internet address in a web browser.
    Silly Vista.
    >

Maybe you are looking for