Imovie 11 crashes when selecting Tirles or Transitions

I just loaded ilife 11 and I discovered that imovie crashes whenever I click on Titles or Transitions. All updates are done.

Hi
May be help or at least ideas from this
Not knowing the origin to Your problem - General approach when in trouble is as follows.
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Delete iMovie pref. file
iMovie pref. file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named. (one or more of these)
com.apple.iMovie.plist
com.apple.iMovie3.plist
com.apple.iMovie7.plist
com.apple.iMovie8.plist
com.apple.iMovie9.plist
com.apple.iMovieApp.plist
and find
com.apple.iApps.plist
While iMovie is NOT RUNNING - move this/these file/s out on to desk-top.
Now restart iMovie.
If You run Mac OS X.7 or more - then the Library in the User-account folder is invisibly and need to be set to be viewable. IT IS NOT in the Library on Root level (when opening MacintoshHD - first window = root level)
( It can be done like this: Open Terminal, then enter: chflags nohidden ~/Library
Press return, then restart, and it will always be visible until the next major update, when you do the same thing again. )
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple’s Disk Utilities application)
• Disconnect all external hard disks and try - FireWire, USB/2, AirPort or Net-work connected.
To work OK I prefer FireWire AND it must be Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - WILL NOT DO for video - neither for iMovie or FinalCut or iDVD any version ! This also includes any USB-memory sticks.
• Garageband-fix. Start it, Play a note and Close it. Re-try (Corrects an audio problem that hinders iMovie)
• Screen must be set to Million-colors
• Turn off Mac and disconnect Mains/Power for 20-30 minutes - will at least re-set FW-port
• Third party plug-ins that doesn't work OK (not relevant for iMovie’08 or 09 or 11)
• Problems in iPhoto Library can affect iMovie to crash on start-up. Re-build this first then try to re-start iMovie.
This You do by
_ close iPhoto
_ on start up of iPhoto - Keep {cmd and alt-keys down}
_ now select all five options presented
_ WAIT a long long time
• iMovie updated ?
• QuickTime updated ?
• Mac OS version ?
• Program miss-match. iMovie 4 - will not work under Leopard
• Program miss-match. iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
• Program miss-match. iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (will work under Leopard and Snow-Leopard)
• Program miss-match. iMovie’08 v. 7.1.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (will work under Leopard and Snow-Leopard)
• Program miss-match. iMovie’09 v. 8.0.6, Mac OS X.5.8 AND QuickTime 7.6.4 - is OK (will work under Leopard and Snow-Leopard)
From LKN 1935. (in this case = iMovie HD (5), I tried it all, but nothing worked.
Your answer (above) has been helpful insofar as all the different trials led to the conclusion that
there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
to my Sony camcorders worked properly as it did before.
Lennart Thelander
I run "Cache Out X", clear out all caches and restarts the Mac.
Yours Bengt W

Similar Messages

  • IMovie Crashes When Trying to Do Transitions

    I just started using iMovie '08 on my MacBook and whenever I click on transitions, iMovie crashes. Then this report comes up.
    Process: iMovie [1341]
    Path: /Applications/iMovie.app/Contents/MacOS/iMovie
    Identifier: com.apple.iMovie7
    Version: 7.1.4 (585)
    Build Info: iMovieApp-5850000~26
    Code Type: X86 (Native)
    Parent Process: launchd [270]
    Date/Time: 2010-09-11 16:35:39.397 -0400
    OS Version: Mac OS X 10.6.4 (10F569)
    Report Version: 6
    Interval Since Last Report: 778293 sec
    Crashes Since Last Report: 14
    Per-App Interval Since Last Report: 9183 sec
    Per-App Crashes Since Last Report: 9
    Anonymous UUID: 1B087614-29D0-47AD-97CD-5B4E7BE085AE
    Exception Type: EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread: 0 Dispatch queue: com.apple.main-thread
    Dyld Error Message:
    Symbol not found: _CGCMSUtilsGetMD5Signature
    Referenced from: /System/Library/PrivateFrameworks/GraphicsAppSupport.framework/Frameworks/Quart zComposer.framework/Versions/A/QuartzComposer
    Expected in: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    Model: MacBook2,1, BootROM MB21.00A5.B07, 2 processors, Intel Core 2 Duo, 2.16 GHz, 1 GB, SMC 1.17f0
    Graphics: Intel GMA 950, GMA 950, Built-In, spdisplaysintegratedvram
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.10
    Bluetooth: Version 2.3.3f8, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST9320325AS, 298.09 GB
    Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N, 7.24 GB
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x1d200000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x5d200000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x7d100000
    I am running on Snow Leopard and this has really been bugging me. I really don't want to reinstall the operating system. I have tried many things including deleting iMovie preferences as well as reimporting the files. It is also the most up to date version of iMovie '08 after doing a software update. Any help would be great.

    Wish I could help but I'm having the same problem
    I've tried emailing apple but no response

  • IMovie crashes when trying to access transitions

    hi folks, seems since I last got an update for iMovie, every time I hit the button to access transitions, the application crashes. It doesn't matter whether it is the button, the keyboard shortcut or the drop down menu the same thing happens - anyone else having this problem?
    cheers
    Tony

    Go to the Apple menu>about this mac>Info>Hardware>Graphics>is Quartz Extreme listed "supported"?
    http://docs.info.apple.com/article.html?artnum=303683
    Make sure your software is up to date.

  • IMovie crashes when importing video

    iMovie crashes when importing video

    I agree with Keydogg. Here it is step-by-step.
    Try a "File Import" instead of "Camera Import":
    _ Quit iMovie '09
    _ Create a folder in your desktop & name it "Flip_videos"
    _ Mount your Flip camera to the Mac
    _ Copy your video files from the camera to the "Flip_videos" folder in your desktop
    _ *Eject / Disconnect* your Flip camera from the Mac
    _ Launch iMovie '09
    _ *Go to* "File > Import > Movies..."
    _ Browse to the "Flip_videos" folder, Select "Create New Event"
    _ Click Import
    Let me know if that helps!

  • I create a project w/iMovie and I have two problems:  When I try to finalize the project iMovie crashes; when I share to DVD sometimes it crashes also; if I can successfully send it to DVD and then burn a DVD there are wavy lines on the screen.  Help!

    I create a project w/iMovie and I have two problems:  When I try to finalize the project iMovie crashes; when I share to DVD sometimes it crashes also; if I can successfully send it to DVD and then burn a DVD there are wavy lines on the screen.  I'm uising photos in my project, not video.  Help!

    You can split a project in two by doing this.
    1) Go to the Project Library View.
    2) Select your project, and click FILE/DUPLICATE PROJECT. Give it a name like "your project name - part 1".
    3) Do this again. This time name it "your project name - part 2"
    4) Open Part 1 for editing. Delete everything in the second half.
    5) Open Part 1 for editing. Delete everything in the first half of the project.
    At the end you should have your original project, plus the same project in two parts.

  • Imovie crashes when i try to view the video full screen or export it. How do i fix this?

    iMovie crashes when i try to view the project full screen and export it. How do i fix this?

    Close out of the camera app, double tap the home button and completely close out of the app.
    Then do a reset, no data loss.  Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    Then check your camera roll again.

  • Photoshop CS6 crashes when selecting tools

    Hi, I'm having the same problem as a few other members (Photoshop CS6 occasionally crashes when selecting tools)  and have updated the driver on my HD5770 card to the latest version (8.961.0.0) as this is the recommended fix. Unfortunately this hasn't fixed the problem.
    Here is the error report from the most recent crash.
    This is very irritating as I inevitably lose some of my work when the application crashes.
    What else do you suggest as a fix?
    Steve

    I installed 12.3 and restarted my computer. This did not solve the problem.
    I've reinstalled Photoshop twice as well with no developments.
    Then, I found this thread: http://forums.adobe.com/message/4289204
    My card (Radeon X 1300 / X 1550) is not listed in the "Tested video cards for Photoshop CS6" section.
    If I go to Edit->Preferences->Performance, and mouse-over the "Graphics Processor Settings" section, it says "Photoshop detected an error in your display driver. Update or reinstall the driver and check Use Graphics Processor to retry".
    Is there any way around this?

  • InDesign CC crashes when selecting text

    Hello folks!
    I have a serious issue here on my Windows 7 64bit notebook:
    InDesign CC (and also CS6 before) keep crashing when selecting text.
    I was still on CS6 when this failure appeared first. The strange thing is, it happens not always. When InDesign is opened new it will not crash instantly (most times). After some selecting random text a few times InDesign will crash with the well known "InDesign doesn't work anymore" message. There seems no pattern while selecting text (like special characters, certain fonts, whatever).
    Tried to use CC – no luck! still crashing.
    After some research in the forum I read, that this is very rare issue only occuring if there are more than 1 Windows accounts with both InDesign running. Indeed I made new account shortly before the first time this happened.
    But sadly even after I completely wiped the second account, all my InDesigns (CS5, CS6, CC), all prefs, and also all fonts (as recommend in a thread with people havong trouble with just the type-tool itself) and all registry thingies the problem remains. Why?
    Please help, it really kills the productivity.
    Thanks in advance for everything!

    Well, wonky extension seems like a good idea, but can be withdrawed because I haven't installed one.
    The font issue is also equally probable. As already mentioned: The interesting aspect here is, that both InDesign CS6 and CC will crash. It happened the first time when Windows decided to blue screen and f*** up my account (I wasn't able to log in anymore, I had to made a new one). I once read in another thread that there is a problem occuring when having multiple Windows accounts with InDesign running. Re-installing InDesign didn't help. Font problem after all?
    I have installed at the moment:
    MainType
    NexusFont
    Typograf
    and some small others, like: dp4 Font Viewer or FontViewOk

  • JVM crashes when selecting non-default printer in ReportViewer in NATIVE dialog.

    On ReportViewer frame i have the print button active.  If i click the print button (Native dialog) and select a printer other than default printer, the JVM crashes.  Any idea how to fix it?
    Thanks

    I wanted to provide little history of what I am trying to achieve.  Currently, I have the following code:
    PrinterJob printJob = PrinterJob.getPrinterJob();
            if (printJob.printDialog()) {
                String printerName = printJob.getPrintService().getName();
                String printJobName = printJob.getJobName();
                PrintReportOptions printOptions = redirectPrinter(printerName, printJobName);
                sendReportOutputAndClose(reportClientDoc, printOptions);
    I want to capture the number of copies user selects from the dialog.  When I do printJob.getCopies(), it always returns 1.  Not sure how to get that # of copies user selected.  I also wanted to the dialog to be in Native mode because I don't want to give access to modify Margins and other page properties which are part of COMMON dialog mode.  If I create the dialog printJobAttribute.setDialog(JobAttributes.DialogType.NATIVE); then VM crashes when selecting a non-default printer but I am able to get the number of copies.  The key is I need to use NATIVE dialog and get the number of copies.  One option is to display in COMMON dialog mode and then hide the "Page Setup" and "Appearance" tabs.  Can this be done ?  I am new to Java and Crystal so any suggestions would help.

  • Elements 13 crashes when selecting Print

    Elements13 crashes when selecting Print from the File menu.
    Rebuilding the Preferences file will bring the Print menus back, but only temporarily.
    No error message, Windows advises the program must be shut down.
    Win 7, 16GB RAM, Elements 6 on the same computer works fine.

    Hi ,
    You are going through File menu > Print or File menu > Order Prints .
    Meanwhile go to Edit menu > Preferences >> Adobe partner services .
    Click "Refresh Button"
    Click "Reset Account"
    and "Clear On-line Serves data" also.

  • JVM crashes when selecting a CLOB in a OracleCallableStatement

    Hi all:
    We have a lot of places in our codebase where we "batch" a no. of
    selects using the OracleCallableStatement for better performance (i.e.
    save multiple roundtrips to the db). Recently we upgraded to Oracle
    8.1.7 and converted the LONG column in one of our tables to CLOB. Once
    we did that, every place in the system where we use a "batch" select
    (using refcursor) the JVM crashes (no stack trace, just the infamous Dr.
    Watson on NT and SIGBUS SEGV on Solaris)
    We are running wl510 sp10 , driver is weblogic oci (oci817_8).
    Here is a sample code
    cstmt = (OracleCallableStatement)con.prepareCall(
    "BEGIN \n"
    + " OPEN ? FOR SELECT A, B, C FROM TAB1 where ..;\n"
    + " OPEN ? FOR SELECT X, Y, Z FROM TAB2 where ..;\n"
    + " END;");
    cstmt.registerOutParameter(1, Types.OTHER);
    cstmt.registerOutParameter(2, Types.OTHER);
    cstmt.execute();
    rs = cstmt.getResultSet(1);
    Is there an update or patch for the driver which resolves this issue?
    thanks much,
    mohan

    I wanted to provide little history of what I am trying to achieve.  Currently, I have the following code:
    PrinterJob printJob = PrinterJob.getPrinterJob();
            if (printJob.printDialog()) {
                String printerName = printJob.getPrintService().getName();
                String printJobName = printJob.getJobName();
                PrintReportOptions printOptions = redirectPrinter(printerName, printJobName);
                sendReportOutputAndClose(reportClientDoc, printOptions);
    I want to capture the number of copies user selects from the dialog.  When I do printJob.getCopies(), it always returns 1.  Not sure how to get that # of copies user selected.  I also wanted to the dialog to be in Native mode because I don't want to give access to modify Margins and other page properties which are part of COMMON dialog mode.  If I create the dialog printJobAttribute.setDialog(JobAttributes.DialogType.NATIVE); then VM crashes when selecting a non-default printer but I am able to get the number of copies.  The key is I need to use NATIVE dialog and get the number of copies.  One option is to display in COMMON dialog mode and then hide the "Page Setup" and "Appearance" tabs.  Can this be done ?  I am new to Java and Crystal so any suggestions would help.

  • K recent upgrades my mac laptop to lion. Since then iMovie crashes when i try to export a movie project. I ofter get a message that says not enough memory in the heap zone. What can be done?

    I recent upgraded my mac laptop to lion. Since then iMovie crashes when i try to export a movie project. I ofter get a message that says not enough memory in the heap zone. What can be done?

    I recent upgraded my mac laptop to lion. Since then iMovie crashes when i try to export a movie project. I ofter get a message that says not enough memory in the heap zone. What can be done?

  • IMovie crashes when I try to insert titles.

    iMovie crashing when I try to insert titles. Have added titles before successfully.

    Try Re installing the app.

  • Imovie crashes when i try to share my movie

    Imovie crashes when i try to share my movie and its very frustrating. Help

    Hi MFells,
    If you are having issues with an app that keeps crashing or unexpectedly closing, you may find the following article helpful:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Regards,
    - Brenden

  • IMovie crashes when I try to share with iTunes.

    iMovie crashes when I try to share with iTunes.  I want to view it on Apple TV.

    Hi MFells,
    If you are having issues with an app that keeps crashing or unexpectedly closing, you may find the following article helpful:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Regards,
    - Brenden

Maybe you are looking for