IMovie 11 file size differs from the size it becomes in iDVD

I've made a movie in iMovie 11, and the file size in the finder information window says that it is 667MB, but when I sent it to iDVD it was too big for a single dvd. What are my options? Really would rather not have to chop things out...

Just to clarify, and to add to zyfert's advice, the Best Performance encoding setting allows a duration up to one hour only, including themes and menus, for a single layer DVD. High Quality and Professional Quality give you up to 2 hours (as mentioned by Lennart). But to maintain optimum quality, it's probably best not to exceed your current project duration of 95 minutes (you may need an extra few minutes for menus).
I appreciate that all this can be inferred from Lennart's and zyfert's excellent advice, but just wanted to expand on it a little.
John

Similar Messages

Is there a way to "print" a raster image to a size differing from the artboard, just as w/vectors?

when you print from illustrator you can specify to fit a paper size
that's different from the artboard being used. I want raster images that differ in size from the artboard - is this
possible? Or would figuring out the pixels based on a dpi and a sheet size be the equivalent?

I'm not clear what you describe. Sounds to me like you are confusing the rasterization on the printer/ in the printer driver with actually resizing. All that happens when you fit content on a page for printing is to change the overall ratio of paper vs. content vs. rasterization grid and that is a mere technical thing. Works for vectors and bitmaps. however, AI having a track record of being extremely picky about what it prints, you'd probably do better saving a PDF and printing from Acrobat.
Mylenium

Library size differs from Vault size

I just made a new Aperture Vault. My Aperture Library file is 41.66GB. My Vault file is 35.41GB.
Why are these different?
I have consolidated the library as well, so I am sure that the issue is not related to referenced files.
Thanks,
~BC

Thanks for that. Does my vault size (85% of the library size) seem about right to you?
I only ask because the whole point of the vault is to be sure nothing is lost ... so I want to be sure I have this set up properly.
Thanks,
~BC

Can tablespace block size different from the database block size

I have a 10.2.0.3 database in Unix system.
I created a database used default block size of 8k. However, the client application requires 16k block size database. Can I work around to create a tablespace that has 16k block size instead of drop the database to recreate the database.
Thanks a lot!

As Steven pointed out, you certainly can.
I would generally question, though, whether you should.
- Why does the application require 16k block sizes? If this is a custom application, it almost certainly doesn't really require 16k blocks. If this is a packaged application, it probably doesn't really require 16k blocks. If 16k blocks are a requirement for support, I would wager that having the application's objects in 16k block size tablespaces in a database with 8k blocks would not be supported.
- Mixing block sizes increases the management complexity of your database, potentially substantially. You need to specify a completely separate buffer cache for the 16k blocks, a buffer cache that would not be integrated with Oracle's automatic SGA management functionality. Figuring out how to split up the buffer cache between 8k and 16k blocks tends to be rather hard (particularly if the mix changes over time), which means that DBAs are going to be spending substantially more time managing the SGA in this sort of system than in a vanilla 10.2.0.3 system. And that DBAs will have many more opportunities to set things up incorrectly.
Justin

Sequence size different from clip size = need to render?

Dear All
I would like to edit DV-Pal clips (720*576) in a sequence that has identical settings except the frame size: 1440*576. The final product is then a video with the width of 2(720576).
If I drag into that sequence a clip, FCP asks me to render it. Is there a way around this (for a basic real time edit)? I lowered render options (in sequence settings) to a minimum, still it needs to render. I lowered sequence resolution to half the desired output (720*288) still it wants me to render.
I coudn't find any thread discussing this problem.
thank you,
Hynek

Dear Michael
I don't intend to do a stereoscopic movie. Still I see similarities, or am I wrong.
I would like to run different clips next to each other, and sometimes I would like to stretch one clip over the whole 1440*575 canvas (of course loosing some image at the top and bottom).
The only way I found around rendering my sequence all the time, is to edit my video in a 720*576 sequence by dragging two clips in, resizing them to 50%, and putting them next to each other (each on a different track). Once I have done my edit I take each cut into the 1440*576 sequence and I scale each clip to 100 percent (with copy attributes). I have to do some repositioning of the clips on the canvas (again time can be saved with copy attributes). Then I render it all ONCE.
now is there an faster way? can I learn something from your work flow?
greetings,
H

The waveform of output from file is different from original one

I've a new question about displaying a waveform from a text file. The waveform which its data is from file is different from the original one.
I attached image files which included my two vi files and 3 waveform. In the compressed file, "ReadData_Waveform1.jpg" is a image of waveform from "ReadData.jpg" vi file with the configuration of "Transpose" is True,
"ReadData_Waveform2.jpg" is a image of waveform from "ReadData.jpg" vi file with the configuration of "Transpose" is False,
"WriteData_Waveform.jpg" is a image of waveform from "WriteData.jpg" vi file.
I attached the source file of waveform with text format as well.
Please help me to solve this question if there is anyone who can figure it out.
Thanks, Andy.
Attachments:
Question.zip ‏154 KB
data.txt ‏55 KB

Hi Andy
If you transpose the data when you write it, you also have to transpose it when you read it.
Just have a look at the simple example attached. I write data and read it again. Each file operation is called with the default-value for transpose (false). The data is read correctly.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
data.vi ‏35 KB

How to get the byte[] size dynamically from the StreamMessage object

Hi all,
Using JMS, I am receiving the FDF file as StreamMessage from the queue and attaching it to the PDF file which is present in the local system.
For that, I have written the code as follows:
{color:#0000ff} Message msg = jmsTemplate.receive();
if(msg !=null && msg instanceof StreamMessage)
StreamMessage message = (StreamMessage) msg;{color}
{color:#ff6600}//hardcoded the byte array size value
{color}{color:#0000ff} byte[] bytes = new byte[{color:#ff0000}856{color}];
System.out.println("read msg="+message.readBytes(bytes));{color}
{color:#0000ff}PdfReader pdfreader = new PdfReader("D:\\Managing_Workflows_No_Comment.pdf");
PdfStamper stamp = new PdfStamper(pdfreader, new FileOutputStream("D:\\12345.pdf"));
FdfReader fdfreader = new FdfReader(bytes);
stamp.addComments(fdfreader);
{color} {color:#0000ff} stamp.close();
{color}{color:#000000}The above code is working fine except with the hardcoded of {color:#ff0000}byte array{color}{color:#ff0000} size value{color} which is given in {color:#ff0000}RED{color} in color.
Can anybody know, {color:#000000}*how to get the byte[] size dynamically from the StreamMessage*{color} object ?
Any help would be highly beneficial for me !!!!
Thanks and Regards,
Ganesh Kumar{color}

When you create your stream message you could add an property to your message, something like streamSize that would contain the number of bytes in your stream message. Then you could get this property from the message before declaring your array.
Tom

When I insert a photo from iPhoto into my iMovie, the photo that appears in the movie is different from the one that I inserted - why is this and how can I make it work properly?

When I insert a photo from iphoto into imovie, the photo that appears is different from the one that I inserted. Why is this and how can I make it work properly?

WHat version of iMovie, and iPhoto?
THIs forum is for iMovie iOS (iPads, iPhones).
Are you talking about iMovie for Mac?

How to save files (example:csv) from the different subVI to the same folder of main VI?

I would like to save files (example:csv) from the subVI to the same folder of main VI? Please help! Thanks.

CP_AT wrote:
I would like to save files (example:csv) from the subVI to the same folder of main VI? Please help! Thanks.
I don't understand the problem. You write in the program where to save files, and it saves them there. Do you mean something else?
Cameron
To err is human, but to really foul it up requires a computer.
The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
Profanity is the one language all programmers know best.
An expert is someone who has made all the possible mistakes.
To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
LabVIEW Unit 1 - Getting Started
Learn to Use LabVIEW with MyDAQ

The preview of my brush is different from the results... Hard to explain (Pictures to help)

Out of nowhere, my brushes started acting up. The preview of my brush is different from the results. Im attaching a picture of my cursor preferences as well as an example of whats going on!
Please help me out!

Which version of mac os x and version of photoshop are you using?
See if going to System Preferences>Accessibility>Display and the setting the Cursor Size to Normal resolves the issue.

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date is created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD

How can i AppendText to richTextBox only if the text is new(different) from the text that is already in the richTextBox ?

Code
public void ScrollNews()
listsext.Ext(page);
combindedString = string.Join(Environment.NewLine, ListsExtractions.myList);
richTextBox1.SelectAll();
richTextBox1.SelectionAlignment = HorizontalAlignment.Right;
richTextBox1.AppendText(combindedString);
scrollerText = string.Join(Environment.NewLine, ListsExtractions.myListWithoutLinks);
scroller1.TextToScroll = scrollerText;
if (NewsLevels.newsLevel && NewsLevels.shouldStart)
UpdateTextControls();
scroller1.Start();
NewsLevels.shouldStart = false;
if (NewsLevels.newsLevel == false && NewsLevels.shouldStart)
UpdateTextControls();
scroller1.Start();
NewsLevels.shouldStart = false;
string[] rlines = richTextBox1.Lines;
richTextBox1.SelectionStart = 0;
richTextBox1.SelectionLength = rlines[0].Length;
richTextBox1.SelectionColor = Color.Red;
richTextBox1.Select(rlines[0].Length, rlines[1].Length + 1);
richTextBox1.SelectionColor = Color.Green;
RedColorAlert1();
if (lines == null)
label5.Text = "0";
else
label5.Text = lines.Length.ToString();
The line is:
richTextBox1.AppendText(combindedString);
I'm calling this method ScrollNews every X minutes with a timer.
The way it is now it will AppendText all the time. But i want it to Add the combinededString only if the text in combindedString was different from the text that is already in the richTextBox. Somhow to keep all the time the last text and compare it and
if there is a new text then appen it.

public void Scroll()
listsext.Ext(page);
combindedString = string.Join(Environment.NewLine, ListsExtractions.myList);
richTextBox1.SelectAll();
StringBuilder sb = new StringBuilder();
sb.Append(combindedString);
richTextBox1.SelectionAlignment = HorizontalAlignment.Right;
richTextBox1.AppendText(combindedString);
The problem is that now it will keep adding to the richTextBox the content in combindedString over and over again. I need somehow to check each time if the content in combindedString already exist in the richTextBox if not meaning it's new content then AppendText
it.
If it's the same already exist do nothing don't add it.
EDIT
I write to a text file the content of the ombindedString variable .The first content the lines is the combindedString:
המשטרה עצרה אמא ל2 ילדים קטנים שבעלה נעצר בחשד למעורבות בעלה בכריתת עצים
15:03 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189935.shtml
אדם החשוד בעבירת מין בקטינים נעצר לאחר שהתלונן על 2 שסוחטים אותו על רקע מעשיו
14:50 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189932.shtml
אינדונזיה: 5 הרוגים בקריסת האנגר בנמל תעופה
14:44 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189930.shtml
אום אל-פחם: מספר חשודים עוכבו בחשד למעורבות במימון טרור
14:04 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189914.shtml
אלמנתו של רפ''ק ג'דעאן אסעד, שנרצח בפיגוע הדריסה, ילדה בן
13:05 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189884.shtml
תנאי ליברמן לכניסה לממשלה עונש מוות למחבלים חובת חתימה על מסמך נאמנות
12:39 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189868.shtml
תלמיד תיכון מרחובות חשוד שהפעיל מעבדה ביתית לזיוף תעודות זהות ואישורי מחלה
12:03 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189856.shtml
הצביעות של רענן שקד: האשים את אמהות 3 החטופים ומגנה את חגי הוברמן
11:43 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189848.shtml
And this is a screenshot i couldnt copy the text of the richTextBox1.Text
richTextBox1.Text content image
co uld be that the format of the text in the combindedString and the richTextBox1.Text looks different so it think it's not exist ?
Update:
Not sure if it's important but the combindedString i'm adding the text to it from the variable ListExtractions.myList
myList is List and i build this List like that:
private void ListToStringList(List<string> myl)
for (int i = 0; i < AllNews.Count; i++)
myl.Add(AllNews[i].text);
IFormatProvider provider = CultureInfo.InvariantCulture;
DateTime myTime = DateTime.ParseExact(AllNews[i].original_time, "DyyMMddTHHmm", provider);
string results = myTime.ToString("HH:mm דווח במקור בתאריך : dd.MM.yy : שעה");
myl.Add(results);
myl.Add(AllNews[i].link);
myl.Add(Environment.NewLine);
myListWithoutLinks.Add(AllNews[i].text);
myListWithoutLinks.Add(results);
myListWithoutLinks.Add(Environment.NewLine);
for (int i = 0; i < myl.Count; i++)
myl[i] = Regex.Replace(myl[i], @"\t|\n|\r", "");
And use it:
ListToStringList(myList);

How to transfer files to and from the BB PlayBook

Overview
The following sections outline different methods of transfering files to and from the BlackBerry® PlayBook™.
Wi-Fi® Sharing
Complete the following steps to share files over a Wi-Fi connection:
From the BlackBerry PlayBook home screen, select the settings icon.
Select Storage and Sharing.
Toggle Wi-Fi Sharing to ON.
Tap Properties to verify network identification information. (PlayBook name, password etc)
From a Windows or Mac based computer on the same network as the BlackBerry PlayBook, navigate to the IP address of the PlayBook which can be found under Settings > About > Network.
On a Windows computer, open the Run dialog box and type \\127.1.1.1 (where 127.1.1.1 should be replaced with the actual IP address of the BlackBerry PlayBook)
On a Mac computer, select Go -> Connect to Server... and type smb://127.1.1.1 (where 127.1.1.1 should be replaced with the actual IP address of the BlackBerry PlayBook)
Users will then connect to the media folder which contains several subfolders such as documents, music, photos, videos etc. Users can then move files between the computer and these folders.
File Sharing with a Mac via USB connection
To share files between a Mac and the BlackBerry PlayBook, BlackBerry® Device Manager will need to be installed. Complete the following steps to install BlackBerry Device Manager:
Connect the BlackBerry PlayBook to the Mac.
On the desktop or within Finder, double click BlackBerry PlayBook CD.
Double click the BlackBerry Device Manager Installer to start the installation process.
After reviewing the Read Me and License Agreement click Continue Installation.
Reboot the computer when prompted.
After the reboot is complete and the PlayBook is started, a message may be presented stating that a new network interface has been detected. If this is the case, click on Network Preferences and click Apply.
You may receive the error message "You can't install the 'Network' preferences pane because it is already installed". *** If you receive this message, See the additional notes for further steps, otherwise continue to step 8.
After the PlayBook has been setup in Network Preferences, the PlayBook share will appear on the desktop whenever the PlayBook is connected to the computer.
Click the Playbook icon on the desktop to display the PlayBook share. Users can then move files between the computer and the PlayBook.
File Sharing with a Windows® PC via USB connection
To share files between a Windows based PC and the BlackBerry PlayBook, BlackBerry Device Manager will need to be installed. Complete the following steps to install BlackBerry Device Manager:
Connect the BlackBerry PlayBook to the computer via USB cable.
If BlackBerry Device Manager is not yet installed, the PlayBook will display a screen entitled Installing Drivers.
On the computer, double click the BlackBerry PlayBook CD drive icon.
Open the Drivers folder.
Double click Setup.exe
After selecting the appropriate region and accepting the License Agreement select Install.
Select Finish and then OK to the prompt confirming that the PlayBook will need to be disconnected and then reconnected prior to use.
Once reconnected to the computer, the BlackBerry PlayBook will be mounted as a Network Drive labelled PlayBook [PIN: 500AAAAA]. Double click the network drive icon to access the PlayBook folders. Users can then move files between the computer and the PlayBook.
Environment
BlackBerry® PlayBook™
Additional Information
If you receive the error message "You can't install the 'Network' preferences pane because it is already installed" while attempting to install the Network Device, complete the following steps:
1. Click Ok and Navigate to System Preferences > Network
2. Click Ok to accept the network changes. If you do not see the acceptance prompt, continue to the next step.
3. Click the "+" under the listed device.
4. Click Create on the RIM Network device interface screen
Additional Notes:
File and Folder creation is only available on the playbook within the sub directories of the file structure. No folders can be created on the root folder of the drive. This is by design.
The main folders of the playbook are not meant to be modified renamed deleted or changed. This is by design.
While any file type can physically moved to the playbook the files capable of being opened by the playbook are still limited to KB26606, as well as KB26518.
PLEASE DON'T FORGET TO GIVE KUDOS BY CLICKING THE STAR BELOW. THANKS

After you connect your tablet via wifi in the network, you can also share files doing this:
I personally have windows 7 in my laptops, and when I need to transfer files using my laptop, I open network and sharing center, then I click on see full map and finally I click on the icon playbook-a185, the next screen will show you 2 folders: certs and media.
Another way is opening windows explorer and on the left under network, see the computers listed on the network, find playbook-a185, click on it and will open the folders.
Note: make sure you have file sharing and wifi sharing ON on the playbook. I turn OFF password protect so will be easier to access your files, and when you are done, you can turn password protection ON.
Give kudos by clicking on the start please.
Thanks!!

Why does Photoshop display colors differently from the other applications even in sRGB mode ?

Hello all !
Here is my problem :
Photoshop is set to use sRGB workspace (in edit/colors.../workspace/RVB).
If I understand correctly this is how all native windows applications work.
This means Photoshop and the other applications should display the same colors on a file with a sRGB profile.
Now this is the case until I calibrate my monitor.
When I do, Photoshop colors become different from the other applications (irfanview, explorer, browsers...).
The only way I found to let everything display the same colors is to set Photoshop to use Proofing/RVB Monitor.
What upsets me even more is that Photoshop colors look "better" to me (dark grays seem to dark to me in the other applications.)
I have read that this is because Photoshop takes the new profile into account and others applications do not. But I don't think this is relevant here because everything is in sRGB so the only profile is my monitor's and I think calibration is handled globally by windows : everything (including browsers, explorer, and Photoshop) changes color if I choose to apply the monitor's profile or not with windows color management tool ("use my parameters for this device").
Here is my system configuration :
- Photoshop CS4 (11.0.2)
- Windows 7 64 bits
- HP ZR2440W and DELL 2209WA (these are not wide gamut screens)
I have spent two days trying to figure the logics behind this and really am upset. Any help would be greatly appreciated. Don't hesitate to ask me if there is something that is unclear or some information I forgot to mention.
Thanks in advance,
Yannick

That sounds like an invitation to continue to talk about the issue. Fair enough.
I'm not sure where you're getting "insecurity"... I am just trying to help you help others more effectively.
I invite you to re-read just the first sentence of what you wrote very carefully, putting yourself in the shoes of someone struggling with both the terminology and the concepts:
Photoshop (CMS) reads an embedded ICC profile and CONVERTS it to the custom monitor profile for a theoretical 'true color' display
Think about what "Photoshop (CMS)" might mean to a person who doesn't know the acronym might stand for "Color Management System" (which is I assume what you meant). Adobe themselves don't call it "CMS", they use the acronym "CMM" (Color Management Module). The term "CMS" is used in the computer industry for about a dozen different things.
While a color profile might have been embedded in an image file before it was opened by Photoshop, Photoshop works on documents. A profile is not "embedded" in a document, it is maintained by Photoshop with the document and describes the color values in the document. If Photoshop opens a document without an embedded profile, depending on settings and user choices it might assign a profile or it might even operate on the document without color-management. Oversimplification doesn't help people when they're trying to learn new things unless it's described as such, for example, "This is a bit of an oversimplification..." or "Generally speaking..."
Not every monitor profile is a "custom monitor profile". Quite often a standard profile (e.g., sRGB IEC61966-2.1) is associated with a monitor by the operating system as a default, or a factory profile is installed by a driver package or system update. Your use of the term "custom" is a bit ambiguous and could be read as implying the creation of a profile using a calibration and profiling device specific to the particular monitor.
Photoshop's color management code does not convert an embedded ICC profile at all (read carefully what you wrote). As I said, it transforms color values. That was the key error in your description that prompted me to comment.
If ever there is a time to pick words carefully, it's in a color-management discussion.
-Noel

When I quit itunes it restarts again with the dot under the itunes logo but the iTunes window doesn't open until I click the icon on the dock. Also in the middle of the size vale in the size column the value starts with a number then a ? then a number.

When I quit itunes it restarts again with the dot under the itunes logo but the iTunes window doesn't open until I click the icon on the dock. Also in the middle of the size vale in the size column the value starts with a number then a ? then a number.

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Mac forums.
Regards.

IMovie 11 file size differs from the size it becomes in iDVD

Similar Messages

Maybe you are looking for