IMovie 11 project library does not play in viewer, iMovie 11 project library does not play in viewer
When I have my project library window open, and I want to view one of my projects in the viewer, it shows no video playing.
When I have my project library window open, and I want to view one of my projects in the viewer, it shows no video playing.
Similar Messages
-
Hi
I have problems with my imovie 09. After several days of work with an imovie project I was again about to start editing my project after startup of my mac. I played through the project and everything seemed fine, but when a movie clip was moved infront of a still picture instead of after, the whole project became uneditable and unplayable. When trying to play the project in full screen mode a totally different project is played. Shutting Imovie and/or the mac down does not help. In some cases I have managed to get the red cursor moving along in my project. However, no movie is played in the screen in the right hand corner, -it is totally black, and the audio is again from a totally different project. I am not able to export the project as all the export options are grey. Some of the other projects worked fine and some did not, -and the functionality seemed a bit random from time to time after rebooting/ exiting and reentering imovie. My first guess would be that this is a memory porblem. However, looking at my activity monitor it seems that I'm only using 1.73 GB of system memory of a total of 4....I have tried remove old projects and also quite a bit of clips in my library to minimize memory use. Now it seems that all the rest of the projects are working fine, but my current project is still corrupt. I have tried copying the first clip of my project into a blank project, but it will only play in full screen mode, not in the screen in the right hand corner.
I am working on a mac mini with 2.26 Ghz intel Core 2 Duo, 4GB 1067 MHz DDR3.
I would be very grateful if anyone out there could help me out...Is my project totally corrupt beyond the point of no repair? Why has this happened, and how is it possible that something like this can happen without any kind of warning?
Thanks!Thanks for your reply AppleMan1958. Unforunately the playback problem was only experienced in the project described, - all other projects played fine....and I tried a lot of different ways to do it...so I really believe the whole project, including the playback (which did not work in the editing window in the right hand corner either, -nothing was shown there and the red marker line would not move across the project) just suddenly become totally corrupt...However, after deleting the project as described above and installing imovie11 I have done the whole thing over again and completed the project without problems this time.
But thanks for the tip anyway! -
My project in imovie says source unavailable after I moved the events to the backup drive. It is connected and shows up in the events library. I can see the pictures but they won't play without the source. What do I do.
I moved it because I did not have room on my hard drive to import my latest video. I take videos my grandkids basketball games then edit them as projects. I don't have room to move the whole events library back to my hard drive. Can I move part of it at a time.
I filled up my 1 TB back up drive so got a 3TB to move my video projects to. Do I have to move both the i photo videos and the projects to the 3 TB drive together some how. When can I delete them off the hard drive .
I moved all the i photo library to the 3 TB drive and deleted them out of i photo. That is 87 GB which I don't have room for on my hard drive.
I think when I use the export movie to my hard drive it works but will I still be able to edit it later if I want. Is it best to do quick time or i tunes if I use the export feature. -
When selecting playback from itunes library on Mac (purchased album from itunes!) i get random song played from that album and my selected song disappears from view. Nothing to do with shuffle.Mac OSX 10.6.8. Help, doing my nut in!!
What is your iTunes version?
If iTunes 11, have you checked the "Up Next" list? If it is not empty, try if clearing "UP Next" will help: -
I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD. The digital breakup does not show in playback on the computer. I understand there is a file I need to delete and reboot the computer and imovie will rebuild the file in the program. Help!
My method is to use the DAW in standard recording mode, and set up the camcorder entirely separately. After recording, I automate the audio mix with fader moves and effects, then export ("bounce to disk") a full-fidelity AIFF, 16-bit 48 kHz stereo file (most videos use 48, not 44.1). I use iMovie '11 to import the video from the camera, then import the stereo audio file and match it up to the camera audio by dragging it into the iMovie Project. Make the waveforms visible, it's not too hard to align.
Then, use iMovie's "Export as Quicktime" feature. Here, by going through the menus and options, you can control the audio compression (for example, 256k instead of 128, although 128 seems to be enough for YouTube).
AppleMan1958 posted a YouTube video about controlling iMovie's export options that may help:
http://www.youtube.com/watch?feature=player_embedded&v=vJg-909lx2s#! -
When I click to pay my songs in the library they will not play and it shows a circle with an exclamation point within it. What does that mean, how do I fix it, and how will it play my songs again? They used to play before on my Iphone4 with no problem, but since I upgraded to the Iphone4s there is an issue.
I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.
-
I created a new project using iMovie. I was trying to make changes and when I went to play it back I only get music and no pictures/video. What can be done to fix this? I don't want to loose the whole project.
There are various causes for this error, see [[Firefox is already running but is not responding]] for details.
-
Movie 11 will not play any of the projects I have created over the past several months. It will play iMovie events. Anyone else having this problem? Please help - Thanks
Thanks for the suggestion...
I just got back from the Apple Store for the second visit with the Mac Genius to try to resolve the problem.
First visit we trashed the iMovie 11 application and reinstalled iMovie and ran a software update. Upon relaunching we were pleased that all projects and events ran perfectly from both the HD and the Drobo.
After lugging my 27" iMac back home and restarting it the same problem appeared. I returned to the Apple store for a second visit. This time I left the iMac at the store overnight. The apple service guys were able to duplicate the problem and wiped my hard drive. There appears to be a bug with iMovie 11 (not confirmed) and an elevated report was submitted to Apple engineers.
I am leaving my "old" projects and events on the external drive unless I need to import them. I am not going to restore from back up and will use a "clean" version of iMovie11. No guarantees the problem won't come back. This issue consumed a TON of my time.... hopefully Apple can fix iMove11. -
I created project in imovie 10. When I send it to idvd to burn copy the audio is not in right places. Some muted audio is not muted and other audio clips are with wrong video clips. I don't know what I am doing wrong. Help.
I'm not sure what you mean by iMovie 10 (there is no such version). However, if you mean iMovie '09 (version 8) or iMovie '11 (version 9) there is a fix I can suggest.
If you have used slow motion or fast motion in your video, you MUST use only the presets on the speed slider, which are: 12.5%, 25%, 50%, 100%, 200%, 400% and 800%.
If you have used custom settings by manually entering speed percentages (different to the presets), you will almost certainly experience audio glitches in the exported movie. These glitches are not evident in preview (before sharing) but appear only in the exported movie (as you have experienced).
The fix is to re-visit your project and adjust all speed changes to the preferred preset percentage. This can be a pain, as you may have to re-sync video and audio - but it is the only fix (unless you want to go through a very convoluted process). After adjusting the speeds to the presets, you will of course have to re-export the project.
Note that the glitch is well known in iMovie '09, but may have been fixed in iMovie '11. Which version are you using?
John -
Sometimes my ipod does not down load my entire library when I sync up with itunes, even if I have items loaded in the play list and can see them in the play list in my itunes when I check my ipod play list some items are missing part 1 will be there but part two is not. Why?????
How is your iPod configured to sync music from your iTunes library? In other words, what options and configurations do you have enabled from under the iPod's Summary and Music configuration panes in iTunes?
B-rock -
Project will not play, but video in event library will
Sorry for the quality, it was the quickest setting I could upload. The video explains it pretty well.
http://www.youtube.com/watch?v=l2D126H3mGMLikely that your project is corrupt. Did you happen to work on the project for a very long period of time without closing iMovie? Since iMovie has no "save" or save as feature, I quite long projects regularly to force iMovie to save my project...I do the same before Sharing/Exporting a Project to QTime, Media Browser, or just to file...this way I at least know I have a saved version before Sharing.
Also likely that any new projects also will have the same outcome.
Easy to test if you start by pulling your iMovie Projects folder to Desktop so that no possible corrupt projects affect others. You can always move your Projects folder back or move the individual projects back one at a time...your Events should not be affected. -
Shuffle does not play all songs in the library
I've uploaded about 10 new songs, and they show in the library but they are not playing. Do I need to re-set the Shuffle?
I have the same problem with my iPhone 3GS, without any doubt the shuffle mode is not playing all songs. I have 600 songs, and I only use the shuffle mode. Of these 600 songs:
- 50 have never been played in 6 months (play counter: 0)
- 256 have been played less than 3 times
- 129 have been played less than 7 times.
- Remaining songs, except from the top 4, have been played from 8 to 79 times.
The first four have been played respectively: 511, 319, 223, and 127 times. There obviously is a bias :\. I've mostly never heard more than half of my playlist (and again: I only use shuffle mode).
If you find a solution, please let me know -
I previously made an iMovie project, but with the new version of iMovie (10.0.1) I cannot import the project. How do I retrieve and import my old iMovie project?
You have to upgrade your iMovie 9 projects from iMovie 10 before you can use them. See:
http://help.apple.com/imovie/mac/10.0/#mov902ad0c31
Geoff. -
HT1420 I can not play purchased book in my library, what am I doing wrong? Thanx!
Haayelp Pleeeze!
I tried what I think is everything and it still would not play!What happens when you try to play it, and are you sure that it's an audiobook and not an ibook (which can only be read in the iBooks app on an iPad, iPhone, iPod Touch) ?
-
Entire frame of mini-dv video clips do NOT show in the iMovie '11 viewer in playback mode
I am editing a wedding video in iMovie11 that was recorded on a mini dv tape. When I move video clips from the event library to the timeline, the entire frame is displayed in the timeline. However, the entire frame of the video clip does NOT show in the iMovie viewer or when I playback the video. I exported the video and burned it to a dvd using Toast 11 pro. The video recorded to the dvd as it was showing in the iMovie viewer... the full frame does not show. I would certainly appreciate any advice as to how to solve my problem. THANK YOU!!!
Is your video shot in 16:9 aspect ratio or 4:3?
You can go to File/Project Properties and set the aspect ratio for the project.
When you get a clip that does not match the project's aspect ratio, you use the Rotate, Crop, Ken Burns tool on the middle toolbar to specify how it should be treated.
FIT will place the entire clip in the movie, and will letterbox (black bars) so that it fits.
CROP will fill the screen, but will cut off the top and bottom of your frame. -
Project will not open for Editing from Project Library
Help! I'm a teacher who puts together a 5 minute news show each week. I was almost done last night when imovie crashed. I tried to get into the project library and can see my project with everything done but the titles and sound. I select it and hit the edit button and nothing happens. I double click and nothing happens. In the project file, the project has a turned down right corner. Save me ! This is due first thing in the morning and I still have all the tweaking to do to the sound and titles.
Thanks!
dmunrohchsOpen the file with Preview and do a Save As. Either change the format or keep the tiff. That should fix the files so they can be viewed normally in iPhoto. If the problem is due to an alpha channel in the file this will fix the problem.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Maybe you are looking for
-
hi friends, i have 0date infoobject as one of the fields in a cube. data is uploaded into cube correctly. when i checked data in cube it's in correct format 20.12.2006, but when i checked in bex report it shows 12/20/2006. how to convert it into dd/m
-
How can I set up 2 email accounts in Mail
It's me again. I'm trying to set up Mail 2.1.3. in 10.4.11. I have 2 email accounts. I can enter one just fine but it won't take another. When I try, it says that I "already have a POP account". How do I set up 2 email accounts? I see where I can ent
-
Force JAXB to use custom base class on a per complexType basis?
I know I can <superClass="Blah"> in <globalBindings> to make all classes use "Blah" as a super class. Is there a way to get a complexType to use its own user defined base class? I'd like the JAXB compiler to generate the following classes for the sch
-
I can't choose songs or skip songs without battery running out?
whenever I choose a song or skip a song, it always comes up with the 'no battery remains' message. this happens especially when choosing songs. no matter how much i charge it, once the message comes up i can't get it to play music once i turn it on a
-
I am getting a "cannot get mail" "the connection to the server failed" message, how can I get my emails again?