IMovie 11 - VoiceOver not working

I can see my track in my iMovie project, but I cannot hear it.  If I go to audio trimmer I can listen to it there, but when I click done it doesn't work. I do not have the yellow triangle I have read about in other posts.  Please help!

If the problem is isolated to a single Event, then this may work for you.
Shut down iMovie.
Navigate to that event in the Finder. Move the iMovie Cache, iMovie Stabilization, and iMovie Thumbnails folders to the trash. Take care not to delete any of your original clips (which are not in these folders).
Now, restart iMovie and give it time to regenerate the thumbnails. That should fix it.
If that diesn't work, try trashing your preference file, as described here. https://discussions.apple.com/docs/DOC-4061

Similar Messages

  • TS3391 iMovie 11 is not working. I try to open it and it says it is generating thumbnails for one of my previous projects. All the commands are gray. I have to force it to quit. I just want to capture clips to start a new project.

    iMovie 11 is not working. I try to open it and it says it is generating thumbnails for one of my previous projects. All the commands are gray. I have to force it to quit. I just want to capture clips to start a new project. I googled the problem and there were discussions about deleting files in various folders and renaming clip extensions. I don't like the solutions I saw there and I am not sure they will work.

    Nobody replied so I called Apple. They seemed to think they could fix the problem but I had to agree to pay about $20 first. I told them to put it down as a complaint. I only want to use the software I bought. I can't see that it is my fault it is malfunctioning. I guess I will have to pay. It doesn't seem right.

  • IMovie '09' is not working correctly

    My iMovie '09 used to work fine, and now everytime I try to work on a movie project, the program freezes after I perform one action, and I'm have to force quit the application. My software is completely updated. Any ideas?

    Hi
    Force Quitting - induces small (to sever) errors on Your hard disk eventually resulting in a major crash.
    When one must do this (very rarely) then one should do also
    • Trash the pref file involved - as iMovie pref file here
    • Run Repair Permissions - Disk Util tool
    • Run Repair Hard Disk - also Disk Util tool - BUT do be able to do this You need to start Mac from DVD or external hard disk - one can not do brainsurgery on one self.
    Yours Bengt W

  • Can't use audiobooks AND Genius? And VoiceOver not working for radio?

    Anyone know how to resolve this? In order to transfer audiobooks, I have to disable the automatic syncing from my nano. But it seems that this means that I lose the ability to transfer the Genius mixes that are created in iTunes.
    Also, after much hassle, finally got VoiceOver to work, but it only works when I"m playing music that I already have stored and it won't work for songs on the radio... any ideas?

    I'm not sure about the Genius working with audio books, but from what I understand, when you say that you want VoiceOver, iTunes goes through your music list and makes that voiceover prompt for each song thats in their. It can't do that with the radio because the songs aren't preinstalled on the ipod.

  • IMovie stabilize command not working

    I imported a couple video clips from Aperture, but iMovie stabilize function is not working for them. Are some types of clips not able to be stabilized? I followed the help direction exactly - select the clip, click the Stabilization button - but nothing happens.
    Any ideas?

    After muddling around for longer than I want to admit, I discovered that once I made a movie project, I could use the Stabilization button. The other editing buttons worked on the clips directly before added to a movie, so I expected Stabilization to do the same.

  • My iMovie & iDVD does not work properly at all.

    When I try to share a movie in iMovie, it says "Unable to prepare project for publishing". As well as "The project could not be prepared for publishing because an error occurred. (Error in user parameter list)". Also, it wont import any videos no matter what the format is. I have uninstalled the program & re-installed it but nothing seems to work.
    iDVD does not let me create a project and edit it. It also does not let me create a DVD.
    I have an '07 Macbook w/ Snow Leopard operating system and I have run out of ideas as to why these 2 programs are not working for me.
    Please help!!!

    First try Resetting it: Hold down the home and sleep button, ignore the red OFF slider, wait for the Apple logo then let go.
    If that does not work, Restore your iPhone in iTunes from your backup.
    If that still does not fix it, Restore your iPhone and a new phone (not from backup) and see how it works. If it is doing fine you have a app you are using that is probably causing your problem. Load them one and a time until the problems recur and you will have found the one that is a problem.

  • I want to download iMovie again bc not working with out having to pay again?

    I want to download imovie 2013 because its not working properly but everytime i go to the apps store its asking me to pay $14.99.  I dont want to pay again?

    Open App Store, click on the Purchase icon in the toolbar. Locate your iMovie entry in the list and click on the Install/Download button on the right. If you don't see it in the list it may be hidden:
    Mac App Store- Hiding and unhiding purchases

  • Ipod shuffle voiceover not working

    I have a 4th gen. ipod shuffle. Fairly recently, the voiceover stopped working. The button still works. When I press it, the music that's playing becomes quieter for a few seconds. However, the robotic voice that says the song titles is missing. I have voiceover enabled. The ipod was exposed to magnets, but none of the music was affected. Could this have somehow caused the voiceover to stop working? More importantly, how can I fix it?

    The Shuffle makes use of flash storage, versus using a traditional hard drive that makes use of a magentic read/write head. So no, the magnets would not have had any affect on the iPod. 
    As for the issue with VoiceOver, have you tried a simple reset yet to see if that makes a difference?
    Resetting iPod shuffle
    Otherwise, can you think of anything else that may have changed with the Shuffle since the last time VoiceOver was working properly on it?
    B-rock

  • Imovie - Audio overlay not working on some HELP

    Hey Guys,
    i trying to make a movie and i made loads in the past, and managed to get audio over a cut away. For some odd reason it is now not working, it is on one of the clips, but even with that it chooses when it wants to work, on a few it has a yellow triangle with ! in it, and i thought o i moved file location, so i even replaced it, and it did not work, :/ i have tried turning the speaker thing off and deattaching the orignal audio clip and movign the new clip of audio in and delete the actule clip one, that did not work, i tried having both playing at same time that did not work, just the orginal sound thing, i know the sound is there as when i have it on itunes on the right i can click play n it plays, but it ownt in movie, i have also closed down all paths so its not open anywhere else. it is stressing me out sooooo much and any help is appricahted, i just cant understand why it all worked yesterday but it wont today and on any other new footage n clips i place in. :'(
    regards
    K

    You're welcome. Glad I could help. Sound issues are one of those weird things that can originate from a number of sources. The important thing is it works!
    Please mark this post "solved" to the right of my name (you'll need to log-on to the forum). Helpful for others looking for a solved solution to a similar question, also helpful for me.
    Aloha from Big Island.

  • IMovie Capturing Sound Not Working???

    So today I tried using my capturing button in iMovie and I was able to capture video but the sound isn't being recorded. It use to work last month, which was the last time I used iMovie but it stopped working. I looked at my settings but everything looked normal but maybe I over looked something. Any ideas?
    P.S.
    I also tried to do a voice over on another video in iMovie to see if my mic is working and it is working. Help?

    Let me update my question...
    So today I tried using my capturing button in iMovie (from the iCam) and I was able to capture video but the sound isn't being recorded. It use to work last month, which was the last time I used iMovie but it stopped working. I looked at my settings but everything looked normal but maybe I over looked something. Any ideas?
    P.S.
    I also tried to do a voice over on another video in iMovie to see if my mic is working and it is working. Help?
    Macbook Pro Mac OS X (10.4.11)

  • Setting Duration of Photos (still clips) in iMovie '11 Does Not Work

    Howdy -
    I realize there are already similar posts to this one, but so far as I could tell, most of them involve (& focus on) transitions, whereas my issue is strictly with setting the duration for which a photo is held in iMovie.
    Effectively, I am trying to get a 'stop motion' feel from iMovie. I deselected the auto-apply 'Ken Burns' to all photo imports in the project preferences and figured I would edit the photo duration afterwards, given that the shortest possible duration in the project preferences is 1s, which is much too long. That is where I run into trouble: the "duration" field is acting up a great deal - sometimes it won't even respond to my entering different numbers, other times it will. Sometimes when it does respond to my typing numbers, it won't let me type anything in the decimal position. When it does let me type something in the decimal position, e.g. 0.2s, when I hit enter, it re-sets the time to 2.0s. I've tried different formats for entering time (0:00:2; 0:00:02; 0,2; with & w/out 's' etc) - all to no avail.
    I'm very curious to know if anyone else has reported this problem, & if so what the solution is.
    In case anyone else is having this problem, I did find a workaround:
         1. Import your photos as necessary
         2. Select one photo and manually crop to desired time scale (e.g. 0.3s)
         3. "Trim to selection"
         4. Select that same clip & bring up the window for editing the duration, check the "apply to all stills" box.
         5. voila - amazingly this works.
    Although this is a perfectly easy workaround, I'm a little disconcerted by the fact that iMovie won't repond properly & would be very interested to understand why.
    Thank you in advance for your help.
    Kind regards,
    Rax.

    Hi Rax,
    This may not help, but in iMovie Preferences there is an option to display time down to the frame level. So, rather than entering time as a decimal, you enter each time component separated by a colon. So, 2.5 seconds would be entered as 2:15 - that's 2 seconds and 15 frames (for NTSC or 30 fps formatted video).
    See this screenshot:
    As I mentioned, this may not help. At times I've also had trouble adjusting the duration of stills, even though I have my preferences set to display time at the frame level. Transitions can cause issues with stills duration. In most cases, a transition can be no longer than half the duration of the shortest clip on either side.
    Notwithstanding the transition methodology, my feeling is that there is a bug in iMovie that causes problems with stills duration in certain circumstances. This applies to both iMovie '09 and iMovie '11 (also possibly '08).
    John

  • IMovie, Garageband, iWeb not working?

    Hey everyone, I recently got my macbook back from repairs (RSD). Everything hardware wise could'nt be better. However recently when tring to use iMovie, it loads the file I plan on working on then doesn't do anything. Just quits. No "quit unexpectly" pop-up either. I tried other iLife apps and Garageband did the same exact thing. In iWeb, it starts up but it won't let you do anything (creating a new page, etc.) Iphoto and iCal seem to work just fine. Any suggestions, or do I have to do a restore and repair?? Thanks everyone.

    Hi, NotreDewey.
    See my "Multiple applications quit unexpectedly or fail to launch" FAQ for advice on troubleshooting this issue.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • IMovie '09 iSight not working

    I'm sorry if I don't describe this correctly -- I'm the opposite of tech-savvy!
    I'm trying to record a video using iMovie, but I get an error message each time: "No camera connected. To import video, please connect a camera." (I'm using iMovie '09 version 8.0.6 on an early 2009 iMac running OS X Yosemite, version 10.10.3) But my built-in iSight works when used in every other application, including when I try to record straight from YouTube. I know my iMac and my version of iMovie are both horrendously old, but I'd thought that since I'm running the latest OS, I'd be able to download the latest version of iMovie from the App Store for free -- not so!
    I've been looking around the Apple Support pages for a good hour trying to see if anyone else had this problem, but iMovie '09 seems like it's not frequently discussed anywhere. I tried clicking links to an Apple support page in multiple Support Community answers describing my exact problem...and the links invariably went straight to a 404 error page.
    If there's a way I can get around this problem without paying for a new version of iMovie, that'd be wonderful -- but any advice anyone can give is more than appreciated. Thank you in advance!

    I'm sorry if I don't describe this correctly -- I'm the opposite of tech-savvy!
    I'm trying to record a video using iMovie, but I get an error message each time: "No camera connected. To import video, please connect a camera." (I'm using iMovie '09 version 8.0.6 on an early 2009 iMac running OS X Yosemite, version 10.10.3) But my built-in iSight works when used in every other application, including when I try to record straight from YouTube. I know my iMac and my version of iMovie are both horrendously old, but I'd thought that since I'm running the latest OS, I'd be able to download the latest version of iMovie from the App Store for free -- not so!
    I've been looking around the Apple Support pages for a good hour trying to see if anyone else had this problem, but iMovie '09 seems like it's not frequently discussed anywhere. I tried clicking links to an Apple support page in multiple Support Community answers describing my exact problem...and the links invariably went straight to a 404 error page.
    If there's a way I can get around this problem without paying for a new version of iMovie, that'd be wonderful -- but any advice anyone can give is more than appreciated. Thank you in advance!

  • IMovie Rewind Clip  not working

    Hi, From iMovie Tutorial I should be able to Modify a clip ie Slow Motion, Instant Replay, Rewind. When I highlight the clip in project and then go up to my Modify button, open table the buttons for Slow Motion etc all have the speed & % keys in grey (not black) how can I enable these keys to work? My iMovie version is 10.0.1
    Thanks Wylo

    After muddling around for longer than I want to admit, I discovered that once I made a movie project, I could use the Stabilization button. The other editing buttons worked on the clips directly before added to a movie, so I expected Stabilization to do the same.

  • Really imovie HD6 DOES not work with snow leopard

    I was planning on buying a new computer a mac pro quad
    Does imovie HD 6 work on the new OS?
    please help
    thanks
    scott

    "..Does iMovie 06 use QuickTime?.." ..I understand that iMovie uses some elements of QuickTime for display, for transitions, etc. (..Maybe you don't remember that until QuickTime was altered, a while ago, you could specify the duration of a transition in PAL in iMovie, but the timing matched only NTSC frame rates..)
    "..I have QuickTime Pro 7.6.4 for OS 10.5.." ..I had - still have - QuickTime Pro 7.6.3 for 10.5 (Leopard), but I chose to keep that while installing 10.6 (Snow Leopard).
    "..Should I back it up somehow?.." ..erm; d'you mean Backup using Retrospect or Time Machine, or d'you mean 'back up' as in revert to an earlier version? I'd think 7.6.4 is perfectly OK, and I always Backup to a separate disc before doing a big installation (..e.g; Snow Leopard).
    "..I thought that 10.6 included QuickTime X, and deleted the older QuickTime.." ..It does include QuickTime X, but at installation it offers you the opportunity to keep your older QuickTime version, too. It doesn't necessarily delete the older QuickTime.
    "..So it looks like iMovie 06 and 10.6 are "Good", but is the compatibility of QuickTime X also an issue here?.." ..Dunno. No compatibility problems seem to have arisen for me, but then I haven't used iMHD6 a lot since upgrading to 10.6. I notice you've posted repeated queries about whether still clips continue to play properly in iMHD6 with 10.6 ..I've had no problems with still clips: they run for the correct duration, and accept transitions before and after, etc. Maybe I have no compatibility problems because I still have QT7. Both of them - QT7 and QT X - work happily along with each other, and both can be open simultaneously.
    "..(I STILL hope for a iMovie 06 upgrade someday.).." ..I don't think that day's gonna come. Steve looks forward, not back.

Maybe you are looking for

  • How to output column of text to array

    Hi, In attached vi,  How can I output all column of text into 1D array? I only able to read the first line. Thanks. Attachments: 1.vi ‏8 KB

  • How do U display

    How do U display the <b>overall Result</b> of the <b>characterstic</b> Not Key figures(Like assume that Country ID ) PLz Mail Me at <b>[email protected]</b>

  • Logististics issue--one vendor code is supplier & provides services too.

    Hi all- We are LSP company & have recently implement ECC6.0--an issue has cropped up. how can i maintain only one vendor code( his address details,income tax number,service tax number are the same) who provides services and is also my supplier--what

  • Staroffice Basic, Calc, passing and using ranges

    Okay, I was trying to transfer a VBA function from Excel to StarOffice. The routine call looks like this: =PS_MUL($K$22:$K$277 ; $L$22:$L$277 ; $F$22:$F$277 ; F22) That is, there are three ranges, and a value input. Here is my attempt at STAROFFICE's

  • Why are mxml docs showing as Unix executables?

    Every time I save an mxml file, either from Flex builder, TextMate, or BBEdit its icon shows as a Unix executable (and it does indeed have execute set). Why is this, and how can I ensure it always just shows as a plain text file, which is what it is?