IMovie '11, what steps am I missing, when I go to SHARE, IDVD is grey and not activated, only ITUNES and MEDIA BROWSER? I want to burn a DVD.
iMovie '11, what steps am I missing, when I go to SHARE, IDVD is grey and not activated, only ITUNES and MEDIA BROWSER? I want to burn a DVD.
Share your movie to the Media Browser. Then, in iDVD, drag your movie in from the Media Browser at the bottom right.
THe Share to iDVD option is only activated if your source material is DV or AVCHD.
Similar Messages
-
Under SHARE, IDVD is grey, what step am I missing? Only MEDIA BROWSER and ITUNES is active?
I'm unable to SHARE my IMOVE since IDVD is grey and not active, only MEDIA BROWSER and ITUNES. I'm using ITUNES '11.
Hi
A. I don't know
B. I think that THERE ARE A MUCH better choice to do - ! ! !
As Share to Media Browser is OK
(I NEVER use Share to iDVD from within any iMovie versions as the result will be bad to even worse)
Use this and Share as LARGE (Not HD - also degrading result)
Now Close iMovie and Open iDVD and Import movie from Media Browser - This will result in as Good result possibly when movie comes from iMovie'08 or 09 or 11.
If You want even better result then use
• iMovie up to HD6 - or -
• FinalCut any version
So that the material exported over to iDVD is fully interlaced - as DVDs are so and as SD-Video quality is so as Standard. (There are no HD-DVD quality (but academic - very rare and needs special players))
Yours Bengt W -
I am trying to change the font on my emails; I follow the instructions exactly going to Preferences, Fonts & Colours, then I set the preference - I then go back to my message and it reverts to Helvetica. What step am I missing?
There is a display bug, but it still works okay -
I prefer Arial to the default Helvetica, so that's what I set -
When I first open a new message window, it displays Helvetica as the font -
However, as soon as I type the first character, it switches to showing Arial as the font -
...and actually enters in Arial. -
iMovie 11 audio issues. Fine in timeline, but when rendering to iTunes or Media Browser, audio from certain portions of movie files are heard in places where it shouldn't be !
I have created a project where I have a montage of photos and video clips edited together with music under. Some audio portions of the video files are being muted in some areas and those portions are being heard in another part of the project. This is not for all video clips only certain ones.
The project plays fine in the timeline, but when I render the project thru iTunes or Media Browser, this is when the project goes corrupt.
I tried detaching the Audio from the video clips and this somewhat worked, but the original problem still exists with certain audio still being heard where it's not supposed to be.I have a fix - or rather, a workaround.
WARNING: It is lengthy, but still far better than starting a new project from scratch.
I had this same issue and none of my transitions/clips were at custom speeds, nor did I have anything else weird going on. Unfortunately there is nothing you can do within iMovie to fix this, at least there wasn't for me. iMovie is BY FAR the buggiest software I have ever used and if you haven't already spent hours slaving away on a project, you are so much better off using just about anything else to edit your video.
...But let's assume you have already spent many hours working on your project and you don't want to start all over. Well then, you have at least one option.
It's a pain in the neck, but it's infinitely better than restarting your project from scratch.
This will require:
A software called Soundflower (which is free) and some kind of audio editing software (I use Logic, but really any should work).
1.) You're going to need to export your video with the messed up audio. Typically if you're audio is messing up, you're video is at least usually working just fine (at least it always does for me).
2.) You're going to need to open that video in your audio software and import only the audio. If your software doesn't give you this option, then you're going to need to record the audio from your video using the audio software and Soundflower. You can find tutorials on how to do this, but it's honestly pretty straightforward once you start playing around with you Mac's audio I/O settings. Remember to have your computer's volume all the way up when doing this.
3.) Watch/listen to your video and make notes of where the audio errors occur. I HIGHLY RECOMMEND writing down times too, as they will be extremely helpful later.
4.) Now were going to rip some working audio from the iMovie project itself. Go back into your iMovie project and only play back audio while in the edit window for this step. Do NOT play your project back in full screen.
This part is key: if you try to play back your project from the beginning the audio will usually still mess up. So, what you're gonna have to do is go back on your edit window timeline right before these errors occur and play that specific clip back while recording this working audio with Soundflower and your audio software. Essentially we're only recording the parts of the audio where these errors occur, so try to do this in order if you can. Try to leave several seconds of audio in before the error - that way we can use it as reference when we construct our new audio track.
5.) Now in your audio software you should have your original error-filled audio track and the new clips that we just captured. This part can be painstaking if you're not familiar with audio editing softwares, but as you'll learn, it's really not that hard.
You're going to look at your original audio track and compare it to your new working audio clips. You should be able to notice where those new clips are supposed to go by looking at the identical (or close to identical) waveform shapes in your original audio track. The two should correspond with one another. If you don't understand what I mean right now, you will when you start playing around with the audio. This is why marking times is very important.
Take your new clips and split them up if you haven't already, that way you can drag them around and edit them separately from one another. Essentially your going to line these new clips up with original and then replace the original parts with new ones.
We need to get this as precise as possible, so start off by getting them as close as you can with your naked eye, and then use a zoom tool to zoom in as much as possible so that you can get them lined up PERFECTLY, or at least extremely close. In some softwares you can just drag these new clips on top of the old track, but most of the time you will need to actually cut out the old piece and replace it with the new one. In doing this, zoom in and make sure that you are NOT cutting out a bigger space than your new clip will fill - otherwise you will have small gaps in your audio.
VERY IMPORTANT: Also make sure that this new audio track starts at the EXACT SAME time as your original - otherwise your new audio will be out of sync.
I know this part can really suck if you're not used to audio editing, but at this point, there is little other choice.
6.) Once you are done with this, export your newly pieced together audio track.
7.) Now open iMovie and create a NEW project. Re-import the video that you exported earlier that has the messed up audio. This might take a while, so just be patient.
8.) Then right click the clip and select "Detach Audio". This will do just that - allowing you to edit the audio separately from the video. Now delete this audio.
9.) Now, import the new, perfect audio track that we just made and make sure that it starts at the start of the project. Make sure it's in sync and that everything works.
Now just export your new video with the working audio and you should be done. Since we have given iMovie the audio with no editing actually being done in iMovie, it does not have to generate its own audio now and you should have absolutely no errors now - unless there is some that you forgot to take out earlier.
YOU'RE FINALLY DONE!!!
I know this entire process *****, but if you're that far into your project, there is little else that you can do. Now you've learned your lesson:
DON'T USE IMOVIE EVER AGAIN.
I hope this helped! -
my iphone 4 says activation required and then connect to itunes and when i try to connect it wont what do i do (i cant use it at all) :'(
i got it from O2... and it dosent do anything when i plug it into my laptop it dosent come up at all or connect to itunes
-
My computer crashed and I have to buy a new one. What happens to my Contacts, Photos, etc when i use the new computer? I do not have an iTunes backup.
Do you have the iCloud set up? If you don't you need to buy a third party software that will do it for you when you plug your phone into the new computer. You can google: iPad/iPhone/iPod to Computer Transfer. You have to pay for the software but it's really a life saver and you get free updates for life. It'll save you a lot of pain and suffering in the future. I've used it many times.
-
The camera icon is missing when i take a video,i cant take pictures on my iphone 4s and itouch 5th gen.it started when i updated it to ios 6.0.1
Sorry I'm so late responding; I've been away.
http://support.apple.com/kb/TS3694#error1611
The error means that your antivirus or firewall is blocking the update process. -
HT1212 What to do when you have not synced to itunes and when it says to connect to itunes?
what to do when you have not synced to itunes and when your ipod says connect to itunes?
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
My MacBook Air is not charging and not lighting to orange and green, try what I saw in the net by pressing (shift-ctrl-option power button) but still same problem not charging,only it turned off but when I turn it on again nothing happens.. Pls tell me
Wrong forum. This is the iPad forum.
-
I have iPod Classic in Disk Mode and what do I do next cause it's not showing up in iTunes?
Does the iPod appear on your desktop as an external hard drive? Has the iPod ever successfully connected before? Disconnect your iPod and reset it using the Select (Center) and Menu button combo. Then reboot your Mac, open iTunes, and reconnect your iPod to a high powered USB 2.0 port and see if it's recognized.
Have you worked through all the troubleshooting here?
iPod not recognized in iTunes and Mac desktop
B-rock -
Hello Community, I hope ya'll can help me. I have a Dell Laptop with a 32-bit Operating System, running Windows 8 with Media Center. I Upgraded to Windows 8.1 recently. Some of my Apps I had with Win. 8 were not compatible with 8.1. This next is my problem, When I install iTunes everything downloads fine until I click finish. @ windows pop up, 1 after the other. The 1st one says, " Application Apple Support not found, Uninstall iTunes and try download again. " Then a second window says, " Error 2 ", "The iTunes Application cannot run without the Apple Support ...." What is this "Error 2" and is there a fix for this? I appreciate everyones knowledge in helping me come to a solution. as I aint no hi-tech redneck! Thank you, Bob Bryan
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2 -
Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
Thanks for any suggestions.I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
Now I am back on my Mac. I meant the following: Batch Change the date for a large range of photos, that should have a date stepped in increments.
Select all Photos at once and use the command "Photos > Batch Change".
Then set the date for the first photo and select an increment, e.g. one minute.
Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date. This way it will be unnecessary to change the titles or filenames. -
why my iPod (6th generation)not appearing in iTunes and all my songs are gone but the data is the same with last time when got songs.
I understand that your iPod nano is not recognized in iTunes. The following troubleshooting assistant may provide a resolution:
Apple - Support - iPod nano (6th generation) - iTunes Troubleshooting Assistant
http://www.apple.com/support/ipodnano/6th_generation/assistant/itunes/
If the above did not resolve your issue, choose an applicable article below that best describes your issue.
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Mac OS X
iPod not recognized in iTunes and Mac Desktop
MacBook and MacBook Air: iPod won't mount when connected via USB hub
What to do if your computer won't recognize a USB or FireWire device
Thanks,
Matt M. -
When I set up my iphone, I logged in to my own itunes and icloud but it recognized my phone as "Owner's phone" which is my husbands, so when I synched it, it was his apps, etc...help!!
I would do this:
1. on the phone in settings/general/about in the name tap there and give the phone a name that you can recognise.
2. open itunes on your computer and attach th ephone using a cable
3. Click on edit then preferences then on the devices tab in itunes on the computer and have a look what backups are there (assuming you backup to the computer nand not the cloud. Is the backup of your ol dphone there?
4. Log out of whatever apple ID you are are in when your click on itunes store in itunes on your computer and log in with your own ID
5. With your phone attached to the computer and itunes open select your phone in the left column and right click on it and click on restore. It should allow you to choose the backup that you wish to restore from. Choose the back up of your old phone and not your husband's phone
I assume you have your own ID and that you are not sharing IDs -
My 3G S iphone cannot open, it displays only iTune and a USB cable signs, please what can i do
My 3G S iPhone cannot open. When powered on it displays only iTune and a USB cable signs.
Please what is the renedy.
Regards.
IkeTry to connect in recovery mode, explained here: iOS: Unable to update or restore
Maybe you are looking for
-
TS4002 Can I change my iCloud email address to a different name of mine ?
Can I change my iCloud email address to a different name of mine ?
-
How do I turn on -XverboseTimeStamp without restarting the server?
The execute method on the getDiagnosticCommand seems pretty handy for invoking things programatically. I can turn on verbose GC with this command, but how can I turn on the verbose timestamps so I know when the gc occured (without restarting)? Thanks
-
Hi All, There is a program which generates the excel sheet from an ALV report. I want certain fields in the excel sheet to be in large bold font. Can anyone please suggest me the possible way to do it. Thanks and regards Rohit
-
Prevent internal hard drive from being unmounted?
I have an XServe with two internal hard drives. The second hard drive is just for data storage. I have a work colleague who needs to get on this server periodically, using Apple Remote Desktop, to connect via afp to a second server in order to copy d
-
Cannot select mobile device when visiting Store wi...
I have problems browsing Store with my Firefox v10 browser. Same problem occurs even using Firefox on Linux (Fedora 16) or on Windows 7. Selecting mobile device is totally impossible because some failing CSS, javascript, or whatever browser dependent