IMovie '11 will no longer show project or open the project file

Upon finishing a project, I was ready to do a Share > Export Movie command, and opted first to do a restart on my computer (by first doing a File > Quit in iMovie).
Now my project no longer shows up in the projects pane!
While the import of the original footage still exists in the Event Library pane, the project is nowhere to be found in the Projects Library pane.
In addition, while the project file that sits in my iMovie Projects folder is there, it will not open! 
When I option click it to open with iMovie, iMovie launches normally (displaying no messages) but does not show the project in the projects pane! 
What has happened here?  The iMovie Projects folder is on my internal hard drive and I have not ever moved any files around. Is there any way to get it back?
I have tried to open my project file on a different computer that is networked in the same room, but the same happens: iMovie launches normally, however the project does not appear in the the Projects Library pane. 
As a test, I have created a couple new projects that I have named "Test1" and "Test2" and they indeed show up normally every time I launch iMovie or do an "open with iMovie" command from the iMovie Projects folder.  But my origional project just doesn't work. Please help!
If this is of any help: my origional project comprises of a 26 minute MOV file that I have simply imported in iMovie and have added subtitles (no transitions).  I had been working for two days on it, and there were 2 times early on when I had to force quit iMovie because I was getting the spinning ball - I was worried about whether the changes were saved, but each time they were indeed saved and I could access the project normally. (I had considered this was caused by a shortage of memory, so I did not think anything of it.) Since then and up to the moment of the problem, I had occasionally shut down or restarted my computer (by first doing a File > Quit in iMovie) with no problems up to now.  
Looking through the forum, I have tried 1) logging in/out, 2) logging in as a visitor, 3) creating a new admin account, in addition to 4) subtracting the iMovie preferences file from the Library, but nothing has worked.
Any help would be greatly appreciated!
I'm running Mac OSX 10.7.5 and iMovie '11 version 9.0.8 on an iMac 27 inch, 2.8 GHz i7 with 4 GB ram. 

Are you running Time Machine?

Similar Messages

  • "Internal SD card unmounted" shows everytime I open the gallery, file explorer

    I am really frustrated I hope someone can help me in here! So I have tried everything I've seen in here. I also did factory reset which seemed to work out  fine for a few hours then now its showing that message again! It sometimes gets fixed on itself then goes crazy again after a while.

    So I found out the only way I could make it work perfectly again is to erase all data. Settings>storage>erase sd card. Before I did it i backed up all my photos, videos, etc. on a pc cause it will delete EVERYTHING. So I erased sd card, copied backed up files back to the tablet and it worked  like before. Yay

  • My WD external hard drive will no longer show up on my Macbook pro.

    My WD external hard drive will not longer show up on my macbook pro.  The light turns on and you can hear it running but it won't show up either in finder or in the disk utility.  This happened a while ago but I really want to get all my photos off the hard drive.  Is there anything I can do to get my computer to read it again or get my data off of it?
    I don't have access to another Mac to test it. 
    Thank you

    dead sata bridge card. very common problem.
    see all about it here:
    Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
    verify HD on another Mac however, if same, dead SATA card most likely

  • My ipod touch 4g just updates today on itunes and the update caused more trouble than good. My ipod will no longer show me the battery percentage in the top right hand corner and also I am not allowed to drag other applications to the bottom panel.

    My ipod touch 4g just updates today on itunes and the update caused more trouble than good for me. My ipod will no longer show me the battery percentage in the top right hand corner and I am not allowed to drag other applications to the bottom panel. Also my itunes doesn't allow "enable disk use" anymore. Can anyone help? My ipod now says that it's the 4.3.4 version

    - Unjailbroken iPod never showed % battery.  Just the icon.
    - Unjailbroken iPod Touches never had a disk mode.
    - What happens when you try to drag a wiggling app to a empty space in the bottom? Does it move and snap back?

  • IMovie showing one thing on the project window and different one in preview

    I have create an iMovie project with iMovie 08. On the project window I could see my pictures as I have imported, in the perfect order and with the correct orientation. I just installed iLife09 and I opened the project on iMovie09. The project window shows pictures in a random order, the orientation of some pictures are wrong (upside down, portrait etc). But to my surprise if I play the video or move the mouse over the pictures it shows the correct picture on the preview window.
    What's wrong ?

    I'm having a similar problem. Any fixes?

  • In iMovie when I move my curser through pictures in the project, I have an empty screen or it shows the first picture only..what might be the problem?

    In iMovie when I move my cursor through pictures in the project, I have an empty screen or it shows the first picture only..what might be the problem?

    Try putting the iPad into recovery mode and see if that fixes it : http://support.apple.com/kb/ht4097

  • TS3789 I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until

    I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until proven for example ios6 on iPhone with that stupid map app instead of google maps.
    I just want to buy and hear my iTunes music and videos on my apple tv, could before cant now. Thank you apple. Time to pack up the apple tv and start torrenting without the ios-bs.
    Disheartened apple fan.

    Welcome to the  discussion forums.
    Try going to synching in the sources menu on your tv and selecting 'change itunes library', when it gives you the passcode check itunes to see if the tv is showing up as a new device, if so try entering the pass code. It may be that your tv is seeing itunes as a different library because of a recent upgrade.

  • This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal.

    This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet it remains. What do I do, I need your help PLEASE.

    Hi
    Error -50 paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Video codec
    • streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Klaus1
    You need more free space on your hard drive.
    jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    Where do Your material come from
    • Camera
    • External hard disk
    • USB-memory
    And all are connected so that iMovie can find it ?
    Yours Bengt W

  • Unable to prepare project for publishing. the project could not be prepared for publishing because an error occurred. (project is too long)

    I have an imovie project that is less than 20 minutes long. i tried to publish it a couple of times and it seemed like it was finished but it never published. i tried one more time and got an error message saying "unable to prepare project for publishing. the project could not be prepared for publishing because an error occurred. (project is too long)". i know the project isnt too long. i am trying again but the error message only comes up after i waited 2 hours for it to finish publishing. PLEASE HELP

    oh and ive tried publishing to almost everything. straight to idvd, to media browser, i tried both hd qualities and also the large quality. no luck with any of those

  • I have made an imovie on my ipad and for some reason the final edit will not keep. When I open the actual projct to edit, it is the way I want it, but when I look at the actual movie

    I have made an imovie on my ipad and for some reason the final edit will not keep. When I open the actual projct to edit, it is the way I want it, but when I look at the actual movie and what loads up to youtube is the version prior to this final fix. I have tried fixing it at least twenty times. The open to edit version has the video the way I want but when I upload it to youtube, its not the version I want to show.

    Well, assuming all of the above, Notifications, etc., it just might be time for a visit to the Apple tore genius center for a session with the techs.  See if it is a fault in the hardware or just an iOS reinstall is the answer.
    One more thing you could try, backup so you have a record of content, then restore to factory conditions be an Erase All Contents and Settings.  Then restore from the backup you just made.  That has helped some with WiFi problems, may be it would work with your problems.
    But with that behavior of another app with problems, the geniuses looks like a less stressful thing to do.

  • IMovie 09 freezes each time I open the project I'm working on. Help?

    iMovie 09 freezes each time I open the project I'm working on. It has worked perfectly fine the past week, but now it won't load different aspects of the screen. For example, when I role over the screen the video will play in the small play back screen, but I can't actually see the film strip or make any changes. Any suggestions? I need to finish this video for work - would love any help!

    Try trashing iMovie's preference file. See this User Tip by AppleMan1958:
    https://discussions.apple.com/docs/DOC-4061
    The Tip relates to iMovie '11. For iMovie '09 the preference file is named "com.apple.iMovie8.plist" and will be found in your Home folder Library/Preferences (NOT the Library folder at the top level in Macintosh HD).
    John

  • Created project in imovie. Trying to move to iDVD to burn. the project in imovies is great. When I view the project in iDVD the audio is messed up. What am I doing wrong?

    I created project in imovie 10. When I send it to idvd to burn copy the audio is not in right places. Some muted audio is not muted and other audio clips are with wrong video clips. I don't know what I am doing wrong. Help.

    I'm not sure what you mean by iMovie 10 (there is no such version). However, if you mean iMovie '09 (version 8) or iMovie '11 (version 9) there is a fix I can suggest.
    If you have used slow motion or fast motion in your video, you MUST use only the presets on the speed slider, which are: 12.5%, 25%, 50%, 100%, 200%, 400% and 800%.
    If you have used custom settings by manually entering speed percentages (different to the presets), you will almost certainly experience audio glitches in the exported movie. These glitches are not evident in preview (before sharing) but appear only in the exported movie (as you have experienced).
    The fix is to re-visit your project and adjust all speed changes to the preferred preset percentage. This can be a pain, as you may have to re-sync video and audio - but it is the only fix (unless you want to go through a very convoluted process). After adjusting the speeds to the presets, you will of course have to re-export the project.
    Note that the glitch is well known in iMovie '09, but may have been fixed in iMovie '11. Which version are you using?
    John

  • ITunes will no longer play my music, all the albumss are there but it if I click on a song to play it I get a message saying " The song (name of song) could not be played because the original file coul not be found. Would you like to locate it."

    iTunes will no longer play my music, all the albumss are there but it if I click on a song to play it I get a message saying " The song (name of song) could not be played because the original file coul not be found. Would you like to locate it."

    You get this message because  iTunes can’t find the file. This can happen for a number of reasons:
    The song file or a folder in its path was renamed
    The song file or the folder it is in has been moved
    The song file has been deleted
    The device containing the song files e.g. external drive is not accessible or the drive letter has changed.
    Do any of these aply to you?

  • Suddenly my iTunes will no longer sync video taken on the iPhone. Why?

    Suddenly my iTunes will no longer sync video taken on the iPhone. Why?

    I have this question too.  I made my own video on my iPhone 4S.  I want to put it on my iPad.  I synced it to my iPhoto, and trying now to move it to iPad.  The computer WILL NOT do this.  Why not? I occasionally get messages it's not in a correct format, but for God's sake, I filmed it on the phone, in whatever format Apple uses.  ***?

  • HT4859 when you go to do this it say that your iPod or whichever device will no longer be backed up to the computer it is currently backed up to, what exactly does that mean? Will i not be able to sync my iPod from that computer?

    when you go to do this it say that your iPod or whichever device will no longer be backed up to the computer it is currently backed up to, what exactly does that mean? Will i not be able to sync my iPod from that computer? Please help me and answer either or both question detailed thanks

    Normally when you sync your device it is automatically backed up to your computer as the first step in the sync process.  When you choose to start backing up your device to iCloud, iTunes stops automatically backing it up on your computer when you sync.  That's what the message is telling your; that you are now backing up to iCloud and not to your computer each time you sync.  You can still manually back up to your computer any time you want by going to the Summary tab and clicking on Back Up Now under Manually Back Up and Restore.
    You can still sync your device as you did before, it just will no longer back up automatically when you do.

Maybe you are looking for

  • How do I edit FrontPage sites with Dreamweaver 8 without messing them up?

    I have to edit a friend's Front Page site using Dreamweaver without messing up her ability to publish also. I'm running Dreamweaver 8.0. I already installed an extension for dreamweaver mx called "Import Front Page Site Wizard for Dreamweaver" but it

  • Create Virtual NICs of a Teamed Interface

    Dear All,             I am building a Hyper-V Failover Cluster.  I have created a team (two physical nics) which I plan to only use for Cluster Communication, Heartbeat and Live Migration.  I have following questions: 1.  How to create virtual NICs o

  • Scope not found intermittent error

    We are using Oracle 10g R2 and BPEL 10.1.3.1. Our application consists of 2 processes. Process 1 invokes process 2 asynchronously and waits for a response. We have observed that when instances are being created for process 1 and at the same time resp

  • ClassNotFoundException and Serialized Session ??

    Hi,           I am in the process of tidying up our installation of Weblogic Server 5.1           SP7 (Linux Red Hat 6.2). In doing this I am attempting to take some of the           old code installed in different places on the server and create a W

  • Error Installing Biztalk Adapter for Enterprise (BT2013)

    Hi everybody,  I'm attempting to install the adapter for enterprise application, the machine is a win7-64 (phisical) and previously in this laptop had BT 2010. I guess that is something related to the previous version of BizTalk.  The message is: "An