Imovie 2 titles at the same time?

I'm trying to put two different titles over the same clip so that they will be displayed at the same time - one in the upper third that will remain for the duration of the clip, and one in the lower third that will fade midway through the clip.
Every time I try to drag on the second title, it just replaces the first one. How can I get both to be displayed simultaneously?

abc337 wrote:
I'm trying to put two different titles over the same clip .... How can I get both to be displayed simultaneously?
not possible. that way.
what you can do:
• create a new Project
• add your clip, add your title #1
• export that project
• re-import that mov into iM, add title #2
and Welcome abc337 to the  boards ...

Similar Messages

How can I change the font to multiple titles at the same time?

Hey guys, quick question. I have a bunch of titles and lower thirds in my project and my producer decided that he didn't like the font we were previously using and wants to change it to a new one. He seems to do that pretty often. Is there a way to "globally" change the font to multiple title cards at the same time instead of clicking on each one separately and doing it manually for each one? And if there is no way to do that does anyone have any ideas on how to make it easier?

If you have any idea of design and fonts you would understand that "Title Cards" are not "exactly the same" if you change the font... because all fonts are not equal! Lower thirds are probably even more restrictive because they have design elements in them.
If you work with "change their mind producers"...the deal that goes with that is suck up their changes. (on a salary or otherwise)
I was just saying there is no way without scripting ..to change a title ( graphic) en masse ( in Premiere) and get it working because of font differences.

IMovie v6.0.3 and iMovie 08 install at the same time?

Can I have 2 version of iMovie installed at the same time? I want to view and maybe use the new version (in iLive08), but everything I have heard about it is not good. I'd like the option to keep the version 6.0.3.
Thanks

I don't have iLife 08 but AFAIK unlike earlier versions it doesn't overwrite iMovie 1-6.
And besides, if you copied & renamed earlier versions before installing iMovie 1-6, the old version co-existed very nicely with the new version. For example: you want to keep iMovie 4 before installing iMovie 5-6: duplicate iMovie, rename the duplicate as iMovie 4.0.1, install iMovie 5-6 -> voila: you have iMovie 4.0.1 and iMovie HD (5-6).
Some people have almost all iMovie versions in their Applications folder for testing purposes

Imovie downloading twice at the same time??

I was prompted for an imovie download/update but didnt have the hard disc space initially. I have now sorted that problem, but it looks like iMovie is downloading twice at the same time?? In the status bar under Launchpad it has two progress status alternating and when I open Launchpad, both progress details are listed under iMovie. is it possible that it is double downloading? Considering it is 1.94GB and I am pressed for hard disc space, I dont want it on here twice. New to Macbook if that isnt already obvious!

Hi cathygiliam,
Thanks for visiting Apple Support Communities.
If it seems like an iMovie update is downloading twice and you have concerns about available hard drive space, the best option may be to cancel the download(s) and start over.
To cancel a download in App Store, in the toolbar, click Purchases, find the app in the list, hold down the Option key, and then click Cancel.
To cancel a download in Launchpad, hold down the app icon until all the icons start to jiggle, and then click the app’s delete button (x).
To cancel a download in the Finder, click the app's delete button (x).
Mac App Store: Buy, download, and install apps
http://support.apple.com/kb/PH11493
Follow the steps in this article to download the update again:
OS X: Updating OS X and Mac App Store apps
http://support.apple.com/kb/ht1338
Cheers,
Jeremy

HT2488 Is there a way to highlight a lot of folders at the same time to replace underscore between the title words with a space? If it's possible can someone please explain in easy to follow steps for somebody not good with the mac .. Thanks

Is there a way to replace, on a list of folders at the same time, underscore between title words on a folder with a space? If someone has the know how could they please explain in real simple to follow way for somebody not good with Mac .... Thanks

You need a "bulk renamer" to do this.
I personally use ABetterFinderRename, but there are cheaper and some that are free. ABFR has a free trial.
Renamer4Mac is cheap. Check the App Store too.

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

App to record screen and capture video from camera at the same time?

For the love of God, why is it 2013 (the age of YouTube and such), and I can't find an app that lets me record my hdv camera (canon hv30) AND the computer screen at the same time? I make piano tutorials on YouTube and my current workflow is so horrendous that I havent even made a video in almost a year. What should take 30 minutes, takes 5 hours. Here is my current shi**y workflow.
1. I use iMovie Hd to capture hdv camera
2. I use QuickTime X to capture the screen (i record a virtual keyboard display that lights up the keys I am playing)
3. I have to use a DAW to record the piano sound and my voice since iMovie hd doesnt have the ability to record audio from a separate source than the camera, for some **** reason. (opening up and setting up all three programs takes about 8 minutes)
4. I press "record" on all three programs as quickly as possible to make syncing easier. (my videos are about 7 minutes long, so this part takes about 7 minutes)
5. After I record all 3 things, I export the video from iMovie into a friendlier format to edit in another video editor since iMovie doesmt have the ability to overlay the screencap over another video (****). (25 minutes)
6. I render the audio I recorded in the DAW into a wave file. (another 10 minutes)
7. I import the camera footage, the screen cap, and the audio file into the video editing program. (another 5-10 minutes)
8. I sync the audio and video clips since they were recorded separately (2 minutes)
9. I do all the edits (add intro, cut unwanted footage etc) (10 minutes)
10. I re-render the footage into a final video file. (about 30 minutes)
This is fu*****g ridiculous. There is no ONE program that does everything I need, just diferrent programs that have a feature I need, but is missing another. For example, a program called "screen flow" let's me record the screen, a camera, and an external audio source all at once, but for some frisking reason, it doesmt support "hdv" cameras (basically anything that records HD). Then, there are programs that record HD, but can't record the screen at the same time. This is only an issue since I am on a Mac, since apparently there are countless of programs that can do all the things I need at once (so I don't have to resync, and render things like 3 times each) and many of them are even free (such as xsplit) but they only work in Windows. For the love of God why? It's 2013 for christs sakes. It shoudnt take me 5 hours to make a 7 minute video. If it wasmt for this turn-off, I would have thousands of piano tutorials on yourtube already.
So my question. Is there an app that fixes my workflow and allows me to do all the things I need in one program? If there isn't such a program, why isn't there one?

maybe you have outgrown or just need to look at the "pro" applications instead.
Other pro audio applications
https://discussions.apple.com/community/professional_applications/other_pro_audi o
http://www.apple.com/support/logicexpress/
http://www.apple.com/support/logicstudio/
http://www.apple.com/support/finalcutstudio/
At the least, check out their communities.

Can you opening multiple albums at the same time in Photo (not iPhoto)?

When converting the iPhoto library to Photo most of the albums that were in place in iPhoto converted to albums in Photo . . . .but not all. Some were retained as events mainly those that were folders within an album. In order to move them to the right album I would like to have multiple albums open at the same time (side by side) so that I can make sure not to duplicate photos or move them to the wrong spot.
I cant see how to do this, it seems that I can need to open one album and check phots and then close to look within and other and rely on memory. There must be a more efficient and accurate way to do this?

All of the events in iPhoto were converted to albums and are located in the Folder titled iPhoto Event in the sidebar of Photos.
You can't open multiple albums at the same time. You can create a smart album that will do essentially the same thing with the following criteria:
Album is "A"
Album is "B".
The smart album will display all of the photos in those two albums.

Working on 5 movies at the same time and one will not open. It is there and will play but won't open and I can't share it or move file.

Working on a project with 5 movies at the same time andone movie project will not open I can see it and play it but can't open to work on it or share or copy it, what should I do?

WHat version of iMovie?
ANd for iPad or iPhone?
Are you having issues opening a video you took on the device?
OR an issue opening a project you previously created?

How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

How can I use the built-in Isight camera and an external video camera at the same time?
I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
Thanks

Simple question with a not so simple answer.
(a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations. Digital video is processor intensive. The only way to know if your Mac can do this it to try it. If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus. You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
(b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
Other iMovie versions work slightly differently.
iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
iMovie 8 (from iLife '09) is slightly different as explained in this article:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
(3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
(If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
(4) For FaceTime, launch the app and click the Video menu item.
If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
(5) I do not use Skype oir Oovoo. For those or other apps, see Help for each app for info on how to select your desired camera.
Message was edited by: EZ Jim

How to count frequency of two signal at the same time ?

Hello every one
please help me with this one i am really stuck.
The situation   : I have two square wave signal, and i want to measure the frequency of both of themat the same time.
the problem : Error -50103 occurred at DAQmx Read (Counter DBL 1Chan 1Samp).vi:3
Please see the attachement.
i also have 3 analog inputs to be measured.
but i dont have any problem with the analog inputs,,,multiple analog inputs can easily be measured,,,,,but the prob lem is in the digitl (square wave ) signals.
Attachments:
i want to use two counter input.GIF ‏54 KB
two counter tasks1.vi ‏250 KB

NI has an excellent overview of the accuracy and tradeoffs of the different freq measurement methods titled "Making Accurate Frequency Measurements." To boil down the essence of it, the (possibly) increased accuracy of the 2-counter method depends on a relatively long collection / accumulation time which would in turn typically limit the rate at which you could update your measured freq value.
Now let me offer some friendly but blunt advice. LabVIEW makes it easy to collect data. However, there are many other factors affecting the usefulness of that data. I support the dictum: "It is hard to measure *well*."  Choice of sensors, their sensitivity to environment, various sources of noise, an understanding of the decision to be made from the data, programming methods, etc. And even more etc.
What I mean is that just because a hardware freq measurement can be performed that is precise to 1 part per million, it would be very RARE in a test that ALL of those 6 significant digits prove useful. In your app, the measurements are presently only approximately correlated in time. And the gap of blind time between measurements will usually represent a much longer period of time than the measurement itself.
Analogy: suppose you had a 100 minute film at 25 frames/sec for a total of 150_000 frames. Now start selecting individual frames that are separated by some random # of frames between about 200 and 500. In the end, you may end up with a sequence of 400 frames in the correct order. Each individual frame is VERY accurate, but the collection of all of them can zip by in 16 seconds and not give you a much understanding about the movie.
What would usually work out much better is to sacrifice some accuracy in order to collect a greater quantity of frames. You trade off the instantaneous accuracy for the overall coherency.
Sorry, got on a roll...   Back to your question. My own preference is almost always to avoid consuming hardware resources when not truly necessary. I've been toying with counters for many years and have still never once deployed an app using a 2-counter frequency measurement. I do the 1-counter measurement and save the other counter(s) for other purposes.
If you've got an M-series board, the 80 MHz timebase allows you to measure a 500 kHz pulsetrain with a quantization error of only about 0.06% (1 part in 160). There's a pretty fair chance that whatever physical process emits that pulsetrain isn't appreciably more stable than that
-Kevin P.

How can I export several versions at the same time?

Greetings -
I'm looking for something that I may just be missing, and hoping someone here can point me in the right direction.
Basically, I'd like to be able to select an image in my library and export several versions at the same time. For example, I select a photo and export JPG, TIFF and PSD versions in one shot without having to run three separate export requests - essentially a batch action. I can't imagine that this isn't built in already - I'm just assuming that I'm missing something obvious.
Thanks in advance for any advice anyone might have.
John.

Fwiw, I've not seen this requested before.
This kind of Export option is very typical, Kirby, when the rendering of the exported version will take a long time, for example for video or audio. Then you can share several formats at once, to render a version suitable for the web, for viewing on the computer, or the iPhone at the same time. That is really useful, if you render a movie at a full HD resolution and don't have to do it again for an iPhone/iPod version.
QuickTime 7 does this for the "File > Export for Web" option, for example. You can get three versions of your final movie at the same time.
And I just checked, the new iMovie Theater does this as well, when sharing a movie to the Theater:
When you add a movie, trailer, or clip to the Theater, iMovie creates versions of your movie tailored for local playback, playback on an iOS device, and streaming.
Come to think about it - exporting a webpage from Aperture will also export thumbnail sized images plus a larger version for downloading.

How can i record 2 sources at the same time ?

Hello. I am a piano tutorial guy on youtube and am always trying to improve on the quality of my vids and so i go tan HD cam to record the videos in HD (canon HV30) . I also have this little app called "midikeys" and all it does is show a piano layout on the screen and the keys i press on my keyboard , light up on the on-screen keyboard. I want to know how to record my camera and that "midikeys" onscreen piano at the same time . i have a make shift workaround to doing this but it makes things a whole lot more complicated . i basically record the cam by imp[orting the live feed, and at teh same time a have quicklime recording the "midikeys" on the screen . is there a way to do it together ? thanks

Welcome Pianohero to the  iMovie boards..
.. is there a way to do it together ?
I dare to say: no way..
the hurdle to go is that 'keys visualizer' ..
as far as I understand, it does show 'live'.. and doesn't create quicktime movies, right?
so, you would need a 'screengrabber' tool as SnapZ or - better, but $$ - Screenflow.
such a screengrabber would create 'video files' of the action taking place on your monitor.
in a second step, you have to convert these files into something usefull in iMovie.
third step, you need an editing software which allows 'picture in picture' (=two video tracks). this an option in iMHD6 plus a plugin from geethree.com, or in iM09 or in FinalCutExpress ..
if anyone has a less complicated workflow..

When in i-tunes 11 mac, how do i search for a song as well as a genre at the same time?

when in i-tunes 11 mac, how do i search for a song as well as a genre at the same time?

If you mean searching for a song that you already have in your Library, then you can select "Music" first. Then, go across horizontally to Genres and select that; then by using the drop-down menu found under "View" & (of course) select "View Options"-- you will be presented with a limited # of choices to sort by.
My iTunes 11.0.5 shows 4 parameters to choose from: Title, Artist, Year and Rating. Then you can sort & finally...
Enjoy,
mm~

How to access multiple attributes of a node at the same time in XML AS3

     <chapter id="1" title="">
     <screen title="lesson">
     <swf>EXCEL/CH01/CH01_S01.swf</swf>
     <ltitle>Chapter 1</ltitle>
     <rtitle>Setting Up a Workbook</rtitle>
     <prompt>Choose a lesson</prompt>
     </screen>
     <screen title="lesson" tasks="3">
     <swf>EXCEL/CH01/CH01_S02.swf</swf>
     <ltitle>Chapter 1</ltitle>
     <rtitle>Setting Up a Workbook</rtitle>
     <prompt>Click Next to continue</prompt>
     </screen>
I have 2 attributes of screen node which are title and tasks.
how can I access these 2 attributes at the same time in AS3
Is that correct:
excel.chapter.screen.(@title == "lesson").@tasks
Thanks alot in advance.

var excel:XML = <data>
<chapter id="1" title="">
<screen title="lesson" tasks="">
   <swf>EXCEL/CH01/CH01_S01.swf</swf>
   <ltitle>Chapter 1</ltitle>
   <rtitle>Setting Up a Workbook</rtitle>
   <prompt>Choose a lesson</prompt>
</screen>
<screen title="lesson" tasks="3">
   <swf>EXCEL/CH01/CH01_S02.swf</swf>
   <ltitle>Chapter 1</ltitle>
   <rtitle>Setting Up a Workbook</rtitle>
   <prompt>Click Next to continue</prompt>
</screen>
</chapter>
</data>;
trace(excel.chapter.screen.(@title == "lesson" && @tasks == "3").toXMLString());
Note that for this to work (and not throw an error) every screen node needs a tasks attribute.
In your sample code, the first screen node did not have a tasks attribute, in which case an error is thrown when using @tasks == "3"

Imovie 2 titles at the same time?

Similar Messages

Maybe you are looking for