Imovie 4.1 will not interface with my camera
I am using a sony handi cam. I have a imac powerpc with OS.4.11. The software is not finding the camera. Please hlep
What camera model is it?
Do you use a Firewire cable?
Try this:
http://www.danslagle.com/mac/iMovie/usage/5020.shtml
Similar Messages
-
Imovie on mac will not sync with devices
Imovies created on my imac and shared to theater are not showing up on my ipad as they're supposed to automatically. Why could this be?
Hi Mataserda,
Welcome to the Support Communities!
Have you downloaded the latest version of iMovie for iOS on your iPad? When you tap Theater at the top of your screen, do you see any of the movies you've sent there, or is the issue with specific movie(s).? Are the clips less than 15 min in length?
iMovie (2013): Share to “iMovie” Theater
http://support.apple.com/kb/PH14731?viewlocale=en_US
iMovie Help for iPad: Use iMovie Theater
http://help.apple.com/imovie/ipad/2.0/#knad8e3650ff
Play a movie or trailer
To open the Theater, tap Theater at the top of the screen.If you don’t see Theater at the top of the screen, tap the back button.
Tap a movie or trailer, then tap the Play button to play it full screen.If you’re playing the movie directly from iCloud, tap the HD Off button to view a higher-definition version of the movie.
If your movies from iCloud don’t appear in the Theater, go to Settings > iCloud > Documents & Data, and tap to turn on both Documents & Data and iMovie.
Cheers,
- Judy -
Magic canvas photo software will not interface with snapfish
I have a touchsmart pc 520-1047c. I have windows 7. When in the magic canvas photo program there is a button to link to snapfish. you must put your snapfish user id and password. Even though I am entering the correct information, I am receiving a message that the log in failed. I tried to report this error to HP support, but they had me remove the magic canvas software, and then try to restore it. Long story short, it cannot be reinstalled without doing a system restore. They also had me remove and restore the magic canvas photo program. These actions did not fix it. I am 100 percent sure that I am entering the correct log in info. Any ideas on this?
I aslo have a problem with the magic canvas music program. I have all my itunes purchased and converted cd's in my itunes library. The music program sees all of my albums, both converted and purchased, but won't play the purchased ones. The message is that itunes can't be found. This is a new installation of itunes 10.6.3. This problem may be caused by the newer itunes version not being compatible with the latest music program.
Both of these problems aren't deal breakers since I can post to snapfish directly within snapfish, and I can play my itunes purchased music within itunes, but I think that these softwares should be updated to fix these problems.Hello silverjoe,
Let me start off by saying that I'm not entirely versed in the magic canvas software, but want to see if we can come to some kind of resolution.
With that being said I'm relying on this support documention in regards to using the Touchsmart photo application and uploading to Snapfish.
HP TouchSmart Desktop PCs - Using the HP TouchSmart 5.0 Software
From my understanding of reading the section where it starts talking about snapfish ( HP TouchSmart Photo ) there are other options available, Facebook and Flicr. Do those accounts work? If you create a new snapfish account (not ideal, but it at least helps us isolate the issue) does it work?
As for your music issue. So all music you have purchased in itunes doesn't get seen by the music application. Do you happen to know if these are DRM protected files? You say it may be a new installation of itunes 10.6.3, do you know if they worked on previous versions of itunes?
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical. -
I have always been able to sync by plugging into my computer Mac OS 10.6.8 which does not interface with icloud. Now my iphone only wants to sync calander and contacts via icloud and will not sync when plugged in. Does any one else have this issue and or ideas?
Do you have the latest version of iTunes? If not, get it at:
http://www.apple.com/itunes -
I have a G5 which I intend to keep.
Now that I have updated my iphone 4s to iOS 7.0.
I cannot add music to my iphone or upload photos to iphoto.
I have the last itunes 10.6.3. which was supported by apple.
itunes will not interact with my iphone on any level.
Apple made all the equipment I use.
Bentley and Ferrari etc do not stop making parts for their cars?
The least Apple could is.
A. Update itunes to run on a G5
Regarding iOS 7.0 you have totally lost the plot.
We buy apple why?
Quality.
Intuitive interface.
Stable software.
Design.
All that Steve Jobs consider sacrosanct.
Quality is about ongoing support longevity of product.
Its not about trying to sell to every person on the planet, others are way ahead of you.
So try respective the customers you have, it wont be long before theirs a better operating system and your lead in hardware is marginal.
Regards
Glyn Evans
My post on facebook this morning.
If you have an iPhone or iPad do not update to ISO 7 unless you want an operating system that looks like windows 8. The graphics looks like it was designed by a artistically challenged mongoose and the operating system is not intuitive something apple users expect. Overly complicated ugly and generally change for the sake of apples paranoia since the death of Steve Jobs.You need to update iTunes to 11.1 on your PC
-
Hello can some one assit me please. I have purchased a new lap top and copied my old itunes files accross so i do not loose all my music, and have to start again. I can play and see allof my tunes and play these. However I am unable to access the Itunes store through my itunes files. It will not interface at all. I can access itunes store through the Web, but not through the my ituntes file. I have gone in and authorised the laptop through the various process. Highly frustrated already paided a computer person to fix this. However hed deleated all files and started again he had it work and then I turned computer on again and it will not interface from the itune file to itunes, So if I copy a CD it will not tell you the name of the track. I cannot asscess the itunes store to action anything. Please assit me
Regards
KarenI am not an expert, but assuming that you have a Windows or Mac folder with music in it and want to move that to a new laptop, I think you have to import it into iTunes. iTunes needs to associate each file with a link, so copying it over will not associate a link.
Delete the files and try importing. -
I have Mac OS X 10.6.8 and I need to update my iMovie, but it will not let me because I need version 10.7.4 or later. I tried downloading this version but it would not let me because I need 10.7. My question is how do I download 10.7 in order to update my iMovie?
Lion should still be available if you call the online Apple Store. If the Apple Store still has it, they will ask for your Apple ID and credit card number and will then send you a code which you can redeem in the Mac App Store. The Lion installer will download and run automatically.
Confirm compatibility with your current applications and Lion before you upgrade; in particular you will not be able to run any appications that were written only for PowerPC Macs.
Regards. -
Solution when iMovie or FCE will not import AVCHD files or MTS files
Problem: iMovie or FCE will not import your footage from SDHC camera with files in AVCHD structure, or cannot import .mts or .m2ht files (which you may have copied from AVCHD structure. When mounting camera, you can see the camera as disk but iMovie will not try to import footage. If you point Final Cut Express (FCE) to the file structure, it fails to recognize it as a valid file structure. (I have Canon HF10, but understand that this problem is common on many camera models, maybe camera has been turned off at the wrong moment?)
Cause: Faulty file structure on camera or disk
Soultion: Rebuild AVCHD file structure using an AVCHD editing tool. I found multiAVCHD (multiavchd.deanbg.com), which is not perfect, but will do the job. And it is freeware (possible to donate).
I would like comments about others experience - but at least this worked for me:
- Download and install the software (Yes, you need Windows)
- Set the right parameters: mostly default, I didn´t want any recoding. But tick off to keep the source files!
- Select the AVCHD source (or source .mts or m2ts files) and destination
- Start rebuilding: select output for Sony Playstation 3
- Put the AVCHD file structure on a USB stick
*If using iMovie:*
Start iMovie and plug the USB into the mac (virtual disk (.dmg file) or other media should work fine as well). The USB may contain other files as well, but the root of AVCHD must be named AVCHD.
iMovie recognizes the drive as a camera. All is not 100% well, as the dates for making the footage is lost, and the thumbnails are distorted if seen at all, until clicked on. But then import worked for most clips. Some clips gave an error message, but FCE was able to import these (Log&transfer).
*If using FCE:* Use Log and transfer on this file structure (need not be on external disk)
If you have a better solution - please share! I suppose there are other tools out there which may correct the file structure with less side effects and no errors.
If you go for this solution - remember the author of multiAVCHD, he will surely appreciate a donation. I guess everybody will agree that this is worth at least as much as you paid for your SDHC card.
Why a function to correct faulty file structure is not included in iMovie and FCE is beyond my understanding!
I notice many users salvage their footage by converting the .MTS files, using Handbrake etc. But I believe rebuilding the file structure is faster and with no quality reduction.Hi everyone,
I'm hoping someone is still subscribed to this and can help.
I have a Sony HDR-SR10. Yesterday I was able to connect it to my iMac by USB and view all the footage in the import window of iMovie (08).
Last night, to save time sorting at home, I took it to work with me and using the software that came with the camera installed on a Windows PC went through to see which files were rubbish and could be deleted before importing to speed up the transfer on to my mac.
Today, my Mac won't recognise the Camera!?!?!?!
Have I inadvertently reformatted the .MTS files or the camera itself, to windows or something? CanI change it back??
I'm currently creating a new disk image of the camera on my Mac in the vain hope that it will work and be recognised by the Mac as a camera. I can see from the progress box the following text:
Creating Image "Sony Camcorder Media.dmg"
=====Progress Bar=====
Reading (WindowsFAT32 :1)...
Which is why I think I've done something seriously wrong!! .. because it mentions windows!
HELP! HELP! HELP!
I have my entire honeymoon and the first year of my son on this camera and I want to edit with iMovie! Especially as I just paid for iLife 09 upgrade! -
I have tried uninstalling and re-installing iTunes and my pc still will not connect with the iTunes Store. I have tried just about every suggestion on the web to no avail, please help.
When I click on the store it just never opens, I do not receive any message. I try to "refresh the page" and nothing. While having the store selected I go to "help" and check for updates and i get a message; "The iTunes updatte server could not be contacted" and it prompts me to check my internet connection which is fine. None of the items under the "Store" respond with anything.
I ran a iTunes Diagnostics/ Under "Which Tests do you want to run" I check only "Network Connections" and the results that I receive is...
Network connectivity:
Network interfaces, verified
iTunes Store connectivity:
Internet connection, verified
Secure link to iTunes Store, FAILED
Does this help? -
Hi all,
I have an extremely strange issue on my rMBP which has not been solved yet despite over 2 hours on the phone with Apple support, and another hour after being put through to a Senior Advisor, and several online chats.
I have a Apple Certified Refurbished Late 2013 Retina Macbook Pro, which has a 2.3Ghz i7, 16GB of RAM, 500 Flash Storage and the NVIDIA discrete graphics. It was purchased in December 2014 on the Apple Store. It is running 10.10.2.
For some reason, my computer WILL NOT register with iCloud. Messages and Facetime both would not work, my iPhone 4S which is capable of text message forwarding would not recognise it and allow me to turn it on. Handoff, Continuity and Instant Hotspot - basically any of the features to do with iCloud or connecting to another device - do not work.
Originally I believed it was just an issue with Messages and Facetime so I reinstalled the OS back to 10.10.1, but that did not solve the problem. All my Messages contacts kept on coming back as 'not registered with iMessage' and I could not turn on SMS Relay either.
I contacted Apple on Wednesday night and ended up talking to several different people, the Senior Advisor was the most helpful - really tried to help me figure out what was wrong, and to fix it - wonderful help, really was. They used screen sharing and were quite confused. They figured out as well that Handoff, Instant Hotspot, and all those other features don't work either. At this point, they made me update to 10.10.2 to see if it was an issue with the update, but to no avail.
Eventually, the SA checked my iCloud account and saw that the computer hadn't even connected to iCloud, and wasn't even showing up as one of my devices, despite the fact that I had signed into iCloud on this computer.
The SA told me that he suspected it must have been something to do with hardware, but didn't know what it could be. He said the only time he had seen this before was on a refurbished laptop when the serial number hadn't been put back on, but my serial number was there, so he said it must have been something to do with Bluetooth or Wifi.
Wireless seems to work completely fine, but there is a strange thing with Bluetooth in which within System report says that the computer is not discoverable or connectable, despite the fact that in the Menu Bar it says it is on and discoverable. It becomes discoverable and connectable once you toggle the switch in System Preferences.
I was planning to book a Genius Bar Appointment as suggested by the SA, but something strange happened today - all of a sudden, some (not all of them) of my iMessages from earlier today came through. Still no working Handoff or Facetime or Continuity, but now I am starting to wonder what is really wrong.
Despite the fact they said it was hardware (especially Bluetooth), what could explain why it (seldom) or will not register with iCloud? Can anybody shed some light on the situation and whether a Genius Bar appointment could help fix it?
Cheers and thanks in advance.Needed to add some clarification here:
iCloud shows me as signed in, but Calendars are NOT checked
Internet Accounts shows Calendars as syncing -
I have a Macbook and iPhone and like to back up to iCloud. However, my work computer runs Outlook 2003, which I know will not work with the iCloud. The company has no plans to update anytime soon. Since the calendar and contact list on my office computer are my primay ones, I hard sync through iTunes. The problem is that any data synced from Outlook 2003 to the iPhone from iTunes does NOT later backup to iCloud. Is there a solution?
I have the same problem with Outlook 2003 and Win XP which the multinational organisation I work for standardises on and will probably stay with forever!
-
My Apple TV (1st Gen) will not synch with iTunes on my Laptop
I've been trying to do this for a while, it shouldn't be too difficult i think.
All i want to do is synch all the content on my laptop with my Apple TV (and vice versa) so all the content including photos and home videos is the same on both my Apple TV and my laptop.
Some points:
There's enough hard drive space on both
I'm using Windows 7 ultimate on my laptop
The correct port exceptions have been added to Windows Firewall
I have purchases on both my laptop and Apple TV from the iTunes store
We're using a wireless network and it while it's possible to get them both cable wired, it would be a pain
Home networking is set up in iTunes on my laptop
I've set up my Apple TV to synch (not stream) with my account on my laptop
Both iTunes and Apple TV are up to date with their downloads
I think that's it - am i missing anything, or should this now just work?
Cheers
DavidAs per the question, really...
"My Apple TV (1st Gen) will not synch with iTunes on my Laptop"
There's no error messages
Only the films i've bought on my AppleTV appear on my AppleTV
It's been synching for over 4 hours and hasnt got past the first film and the progress bar is not moving
David -
Razr Maxx Calendar will not sync with Exchange Calendar
My Thunderbolt synced fine....just switched to the Razr Maxx Friday and the Calendar will not sync with my Exchange Calendar. Email and contacts are syncing fine.
Gapam wrote:
I guess I'm screwed. My Razr HD calendar won't sync with Google - apparently all my events were on the phone calendar and not Googe calendar. After following prior posts, I cleared the data on my phone's calendar - now my events are gone and I don't know when my next appointments are. Any way to retrieve that data? Any way to sync the two calendars - or to make sure the darn appointments are placed on the Google calendar and not the stupid phone calendar?
You have to select the Google/Gmail account as the location where to save the event. In the screen where you are adding the info to create the event there is a spot for choosing which calendar to save it to. This is where you pick the Gmail calendar. -
FIXED (for me at least): iPhone 3gs will not sync with Gateway NV79
I’ve spent months trying to fix this miserable problem with getting my iPhone 3gs to sync with my new Gateway NV79. Gateway will not help. Their technical support is genuinely worthless. Microsoft blames Apple and Apple blames Gateway.
My old iPod Nano syncs to my Gateway NV79 without a problem. I’ve tried all of the proposed fixes but other posters with no success.
But I do believe I’ve discovered a real fix (for me at least). Here’s my setup:
• Gateway NV79 running Windows 7 64 bit edition
• iTunes 10
• iPhone 3gs running OS 4.02
The USB ports needs tweaking to get the iPhone 3gs to sync to the Gateway NV79. Follow these steps without your iPhone 3gs connected to the Gateway NV79:
Step 1: Go to Control Panel
1. Open Control Panel
2. Click Hardware & Sound
3. Click Power Options
4. Make sure Balanced is selected and click Change Plan Settings
5. Click Change advanced power settings
6. Expand USB Settings
7. Expand USB selective suspend setting
8. Change On Battery setting to Disabled.
9. Change Plugged in setting to Disabled
10. Click OK
Step 2: Go to Windows Explorer
1. Open Windows Explorer
2. Right-Click Computer (not your computer name)
3. Click Properties
4. Click Device Manager
5. Expand Universal Serial Bus Controllers
6. Right-click first Generic USB Hub
7. Click Properties
8. Click Power Management
9. Uncheck Allow the computer to turn off this device to save power
10. Click OK
11. Right-click second Generic USB Hub
12. Click Properties
13. Click Power Management
14. Uncheck Allow the computer to turn off this device to save power
15. Click OK
16. Restart your computer
After your computer restarts, login and connect your iPhone.
You must complete both steps. Step 1 is required for Step 2 to stick.
There are a few things that may happen. iTunes may start syncing immediately and fail with an error. Don’t worry. If the sync fails the first time, restart the computer with the iPhone still connected. Now, iTunes will either take you to setup screen to connect your iPhone or the sync may restart. In my case, the setup screen came up and I DID NOT CHOOSE TO RESTORE. Pick the first option to add your iPhone. The sync will restart and may or may not finish. Don’t worry, if the sync fails, restart your computer again with the iPhone still connected and this time the sync will work.
Here’s the problem: the iPhone 3gs will not sync with the power management enabled for the USB ports on the Gateway NV79.
Good luck.If you cannot update your computer, you will not be able to sync your phone. The requirements are:
Mac system requirements
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.1 or later (free download from www.itunes.com/download)
iTunes Store account
Internet access -
I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?
You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Maybe you are looking for
-
Hello, when i am creating the request i am getting the following request Error Creating Request. There is a Two Stage Workflow for which i have configured the following steps: 1) created a Initiator with Attributes like Functional area with Condition
-
IMessages not going through on iPhone 5 iOS 7
My iphone 5 with iOS 7 isn't sending iMessages. Regular text messages go through immediately almost always. I am using the phone at home, at work, places I've been before the iOS 7 update & hadn't had a problem until i updated my phone. Sometimes tex
-
Mobile Me gallery sorting issue
I recently upgraded iLife from '08 to '09. I am having an issue when I publish and event to my Mobile Me Gallery where its not sorting the photos correctly in the gallery. They don't seem to sorted the same way as I have them in the event when I publ
-
I am writing a Universal app. I have a dto (MobileProject) that has several properties, one of which is ShortName. In my ViewModel, I have a property (SelectedProject) to hold which item is bound to the SelectedItem in the ComboBox. private M
-
I am using the forms 6i. And i have a problem with attach Object Group. After attach, the form do not execute. I have a question: What the values the Object Group utility on the registry? Or if another sugestion... Thanks, so much. Martônio.