IMovie 6.0.4 will not install
Just bought a new iMac today. While installing new software, found out that the computer states that iMovie 6.0.4 will not install. What gives?
You have 6.0.4, you want 6.0 > 6.0.3 ONLY 6.0.4 looks for iLife '08.
You can get iMovie 06 in a number of ways. You cannot download it FROM APPLE any longer (it was free for a time). You can also find iMovie 06 on the iLife 06 install disc. You can buy iLife 06 on Amazon or eBay. WELL WORTH EVERY PENNY!
iMovie 6.0.4 requires that iLife 08 is already installed. iMovie 6.0 thru iMovie 6.0.3 has no such requirement. There are no known functional differences between 6.0.3 and 6.0.4. If you install iMovie 06 from the iLife 06 disk it will probably be version 6.0 or 6.01. However you can update the software to 6.0.3 from Apple's Web site.
http://www.apple.com/downloads/macosx/apple/application_updates/imoviehd602combo .html
http://www.apple.com/downloads/macosx/apple/application_updates/imoviehd603.html
If you want to have both iMovie 06 and iLife 09 (and most do) just install iMovie 06 first, then iLife 09. You are now UN-STOPPABLE!
Similar Messages
-
I recently had to erase all of the data off my hard drive and re-download osx mountain lion. I tried to re-download imovie but it won't let me! it keeps saying an error has occured, please help!
There is no such thing as iMovie 8.
iLife 08 is the suite of apps you purchased and it includes iMovie version 7 (that will not install on your machine).
iMovie 6.0.4 is a free download for those that have installed iLife 08 and you are allowed to download that version after the iLife 08 installation (the other applications):
http://www.apple.com/support/downloads/imovieHD6.html -
Hi, I have iPhoto'09 v8.1.2 (424). I have downloaded v9.2.1 update and it will not install.
Keeps asking for me to have v 9.0 or later. Now i have downloaded 9.1update plus 9.1.3 and they will not install either.
Do i need 9.0 and if so where do i get it? THANKS nomadregNo, iLIfe is a suite of applications: iMovie, iPhoto and GarageBand (earlier versions of the suite also contained iDVD ad iWeb).
Regards
TD -
I have a 27 inch iMac with maverick os. my current version of iMovie (10.0.6) will not open older projects i created in iMovie 9.0.9. I can find the projects and they have a ".rcproject" file extension
Thank you GeeD. I'm still stymied.
I have moved the Event and Project Folders to the "top-layer of the drive" as the instructions state, right alongside the System Folder, Users Folder and Applications Folders.
When I open iMovie 10.0.8, the Events and Projects Folders are empty:
When I select File/Update Projects and Events, I get an alert box that says iMovie couldn't find any:
Not knowing exactly what is meant by the "top layer" in the instructions, I moved the Events and Project folders back inside the "Movies" folder where I found them (but then not where I would call the "top" layer, but rather "iMac/Users/Home/Movies/iMovieProjects". Then I tried to "Update Projects and Events" and received the same alert: "iMovie could not find any projects or events to update."
Then I tried to update iMovie 9.0 (iMovie '11 version 9.0 (1073)) to version 9.0.9 .
[As an aside, the nomenclature of iMovie drives me nuts. The latest version is 10.0.8, which us newer than iMovie '11.]
Back to the update of version 9.0 to 9.0.9.
Presumably because I have version 10.0.8 installed, I got this alert box:
So, I cannot update version 9.0
and I cannot "Update" the Events and Projects created in version 9.0. -
Syncing iPhone - applications will not install message
After some trouble with my two month old iPhone4S I did a Master reset after a full backup. Now when I want to restore the application most of them (not all) will not install on the phone. Doing them one by one looks good in iTunes but on the phone I get the message "Application 'xxx' will not install". Any ideas on how to proceed?
If that's my only option then I may just buy it from the App Store and see if that works. It would cost me at least that in gas to get to my "local" Apple store. It just seems weird to me. All of a sudden iPhoto and iMovie stop working. I completely reset my macbook and I still get the same error. I've done the "Hardware Test" and the DVD looks flawless. I'm really just throwing my hands up.
-
A few days ago my iphoto stopped working. I did a complete factory reset on my macbook (10.6.8) and now the applications on the "Applications Install DVD" will not install. It just keeps saying "an unknown installation error occured." Recovering any of the old pictures and videos is not necessary, I just want iPhoto, iMovie, etc... to work
If that's my only option then I may just buy it from the App Store and see if that works. It would cost me at least that in gas to get to my "local" Apple store. It just seems weird to me. All of a sudden iPhoto and iMovie stop working. I completely reset my macbook and I still get the same error. I've done the "Hardware Test" and the DVD looks flawless. I'm really just throwing my hands up.
-
I am trying to use and education program that needs Java applets and it will not run on Safari. IE will not install from the web. How do I get a browser that will work to install so I can use this program when I travel.
Try using FireFox. IE will only run on a Mac if you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive. -
I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul -
I tried to reinstall iTunes 10.5 on an older PC using Windows XP. iTunes will not install. Tthis is the full error message. Could not open key: HKEY_LOCAL_MACHINE\software\classes\CLSID\{063D34A4-BF84-488D-B699-E8CA04DDE}
Please HelpI was able to solve this problem using the utility explained in this post:
http://blogs.msdn.com/astebner/archive/2006/09/04/739820.aspx
Thanks!
Dell Windows XP -
iTunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
tt2 -
Quicktime will not install on my PC - also stopping iTunes from working
Quicktime and iTunes will not install on my Vista SP 1 PC, Whenever I try to install either I get the following error message;
Quicktime - "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
iTunes - "The installation of Quicktime did not complete successfully. iTunes requires Quicktime."
From my iTunes error message I hope that by correcting the Quicktime error the iTunes should in turn be fixed.
I am using the latest installers for each and I can't understand why this is happening,
I have tried completely removing my old version of Quicktime and tried to copy my other PC's Quicktime folder into this one however that has not worked. I have also tried using the latest installers multiple times however I always get the same error message.
Please help me fix this error where Quicktime can't install,
Thanks
JamesSays windows install package does not operate yet I can install other programs.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.) -
I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.
Welcome to the Apple Support Communities
One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
First of all, open > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there -
The new ACR 5.5 update will not install in Elements 7.0
Hello All:
This situation is now becoming ridiculous (well, for me that is). I just tried to install the new ACR 5.5 update and it is "unable to install" into Elements 7.0. I downloaded the update several times, unzipped the install file, but when trying to install, it just gives me a message that it is unable to install and to hit the "quit" button.
I have a Vista 64 Bit system with 12 Gigs of RAM. I've installed Elements 7.0 and Lightroom 2.5 on my system - all with no problems. For some reason, I could never get Photoshop CS-4 to install at all and I've been through the mill trying to install Photoshop - but nothing worked and had to eventually give up. Trying to get Adobe support for CS installation on my 64 Bit system has been ridiculous in this regard as each and every time I called, I was connected with some techrep located in India who all they did was "parrot" back what I told them - how frustrating. But as I mentioned, Elements 7.0 and Lightroom installed just fine.
The previous ACR 5.4 installed just fine into Elements, but now...ACR 5.5 will not install. It tells me that I do NOT have CS-4 installed so it cannot install. What's up with that? Has Adobe stopped supporting the latest ACR upgrades for Elements? What gives?
Does anybody just have just the newest ACR 5.5 plug-in by itself that they can send me so I can just put it in my plug-ins folder (or a place where I can download it)? Adobe used to just have the plug-in that you could unzip and copy and paste and put it into your plug-in folders - but not anymore. Now they make it an 82 Meg install program and thus some of my problems.
Can anybody help here? Why does the install program look for CS-4, yet overlook Elements 7.0 completely. Helpppppppppp.
BenHi Benherrmann,
Sorry to listen that you havent been able to install the Camera Raw 5.5 plugin.
But as far as my knowledge goes for PSE, PSE never lists Camera Raw plugin for updates in the Updater Preferences dialog i.e., if you will launch Help->Check for updates, a updater window will open. If you will check the preferences of that updater dialog, it will tell you that it never checks for updates for Camera Raw plugin unlike what happens in Mac. In Mac Camera Raw updates does get installs just by installing PSE(v6 of course as there is no PSE7 for Mac. Hopefully there will be a v8 for Mac by the end of october as seen in the last release).
Dont know exact reason why Adobe had configured it in that way? why there is some difference between Win and Mac.
So it prompts me that somehow you need to install Ps CS4 on the machine to get the patch installation through updater. Although this is not Ps forum, would you mind telling what error/issues are you facing while installing Ps CS4?
Regards,
Ankush -
Java applet will not install in browser
My VI will not install a JAva Applet. I jsut keeps saying "Installing Java Applet" and it never prompts for an install or anything. Any ideas? Is there something extra that I need to do that I am not realizing? I attached a screenshot of the window where is says installing.
Solved!
Go to Solution.
Attachments:
Capture.PNG 54 KBHow are you trying to install the java applet? Through a website? Calling an installer?
Could it be that the applet already installed on the computer?
Has it ever worked?
Applications Engineer
National Instruments
CLD Certified -
Macbook Pro SMC update 1.3 will not install
Greetings,
I am having problems getting the latest SMC update to install on my 15" Macbook pro. My built in drive has a boot camp partition, so I understand if the update won't install using that. But When booting off freshly GUID partitioned and HFS+(journaled) formatted Firewire 400 drive (Leopard installed and updated to 10.5.7) SMC 1.3 update will not install and gives same error "Your firmware can not be updated because the hard drive partition scheme may not be supported. You must be booted from a GUID partition or RAID scheme." Huh?
I tried the update pushed down by software update, and a manual download.
Current SMC version showing in system profiler as 1.16f10
Anyone else experience this or have any suggestions?"...hit the hardware start button, get gong, machine starts to boot, something briefly flashes on the screen"
Hi Bob, you have to hold down the start button(5-10secs) until you hear a long tone. Then let go and everything is ok.
You'll also see the progress bar install the update, that is what the brief flash was but because the button wasn't held for a few seconds, it didn't take.
Message was edited by: musashi88
Maybe you are looking for
-
Open pdf in IE using #toolbar = 0 does not display read mode menu
I m trying to open up a pdf document using IE 9 and Adobe Reader XI and if I have the toolbar hidden the first time the document displays the read mode menu bar does not display. I have to refresh the browser to get the read mode menu to display. Ho
-
Importing Accounts in OIA through flatfile
Hi Experts, I have configured OIA provisioning server for a flat file feed. I have accounts to be imported in a csv file in the below format. responsbility,reponsbilitystatdate,responsbilityenddate are multivalued attributes schemafile name<correlati
-
[svn:fx-trunk] 15702: * Package and class level javadoc for the
Revision: 15702 Revision: 15702 Author: [email protected] Date: 2010-04-26 09:16:12 -0700 (Mon, 26 Apr 2010) Log Message: Package and class level javadoc for the flex2.compiler.[css,extensions,fxg,i18n,io] packages. Includes some dead code
-
Since today my Creative Cloud starts only with white background and nothing else. I reinstalled it two times, but the Problem still excists. Thx for help BP
-
Can i use Oracle Express to publish Oracle Forms on the web? I know I can use Oracle Express to publish Oracle Reports on the web. thanks, fz