IMovie 6 isn't recognizing the camcorder
I have tried it with two different cameras now and two different fire wires and each time the iMovie screen says "no camera connected". I took the camcorder to my office and it is working fine with iMovie 9. any ideas as to what is going on?
Welcome to Discussions, smarty30
what is going on?
Troubleshooting needed to determine.
Does one of these help?
http://docs.info.apple.com/article.html?path=iMovie/6.0/en/imv1041.html
http://docs.info.apple.com/article.html?path=iMovie/6.0/en/imv1128.html
http://support.apple.com/kb/TS1924
http://docs.info.apple.com/article.html?path=iMovie/6.0/en/imv1005.html
If nothing there helps, post back whether you are using same camcorder(s) and cables with iMovie 9 as with iMovie HD 6.
If NO Firewire device properly connects with your iMovie HD 6 Mac, reset FW:
http://support.apple.com/kb/HT1317
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.6) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight
Similar Messages
-
I movie 09 on my Macbook Pro isn't recognizing the presence of my Sony handycam dvd201E - nor does it offer options - any advice please? dave R
I have a MacBook Pro 15 inch early 2011.
The new features available in OS X Yosemite like Continuity, Handoff,etc are not supported in this model.
I did upgrade RAM to avoid any possible slowdown.
I found replacing the HD with SSD is too expensive for a 4 years old model.
Replacing the CPU/GPU is not for amateurs.
If you think that rebuilding a Mac part by part is a viable option, please go ahead and rebuild it.
Best. -
HT4796 my PC isn't recognizing the mac
I'm setting up my Mac for the first time and trying to transfer everything from my old PC. The mac is recognizing the PC, but the PC is not recognizing the Mac. There is a password on the mac that I have to match to the PC, but the PC isn't recognizing the Mac.
let's work through a few of the usual suspects. see:
iTunes for Windows doesn't recognize my audio CDs
... and these resources might be helpful with that:
Using CD Diagnostics in iTunes for Windows to troubleshoot CD/DVD drive issues
iTunes for Windows: Updating the firmware on your CD or DVD drive
Updating the drivers on your Windows PC
Where to find firmware for your CD/DVD drive -
IMovie 11 isn't recognizing my Canon GL2
I plug my GL2 in the computer and iMovie 11 isn't reading that it is plugged in... how do I fix it?
Hi
You are connecting it via FireWire ?
See if You find help here.
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W -
New iPhone 6 Plus crashed during ios 8.1 update and iTunes isn't recognizing the device
I deleted a bunch of pictures and music on my phone to have enough storage space to back up my phone. I decided to update my phone first (ios 8.1) and it seemed to be going smoothly. It's hard to remember exactly what happened but when it was almost complete, something went wrong and it indicated that it hadn't installed correctly. It said I needed to clear more storage space in order to complete the installation so I restarted the phone. When it turned back on, I attempted to install the update again (the storage wasn't an issue) and it immediately went into "verifying install" mode before shutting off. Now I only have the screen that indicates I need to plug it into iTunes but the device isn't recognized when I plug it in. Powering it down, holding down different buttons, etc. doesn't work! Help!
Which OS?
iOS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538
Mac: http://support.apple.com/kb/TS1591 -
Sorry I didn't realize the above was just a subject line.
I have been trying to download java for my macbook pro, but for some reason the function is not recognizing the internet. I am on and have checked several times .... I have checked through both safari and firefox but to no avail. Thanks for any help anyone can give.Not really a reply just some added info:
This is the error message I get saying the internet is not on, but clearly as I can send this message it has to be:
To open “Java Preferences,” you need to install a Java runtime, but you are not connected to the Internet.
I am connected through Wi-fi if that makes a difference. -
Macbook pro 2012 isn't recognizing the built in audio output
It is only recognizing the headphones jack, even when it is unplugged, there are no red lights and when I unplug the phones it is just like they were plugged, I ow this because it doesn't change the volume like it was suposed to do if it was recognizing the built-in output
iWelcome to the Apple Support Communities
First, try plugging and unplugging the headphones again, and check that "Internal Speakers" appears in System Preferences > Sound > Output.
If it doesn't work, reset the PRAM > http://support.apple.com/kb/HT1379 This will reset the speakers settings, so it will work properly when you start in OS X. If not, open System Preferences > Sound > Output, and choose "Internal Speakers" -
I'm importing photos from a Nikon d5200 in RAW format and iPhoto says it doesn't recognize that file extension (.nef). The movie files came off just fine. And when the initial window comes up in iPhoto asking if I want to import all photos or just the selected ones, I can see all the RAW file images as usual. They just won't import.
What version of iPhoto? Has this Nikon RAW ever worked with your Mac and this version of iPhoto?
You need iPhoto '11 version 9.4 or higher for RAW support for the D5200 - http://support.apple.com/kb/ht4757
LN -
Facebook isn't recognizing the photos in iPhoto.
I haven't been able to upload anything since I updated my computer to Mountain Lion a few months back. I can open and view my pictures just fine, but when I go to upload the photos to a new album, my computer will just sit there and think... and think.... and think until I get so frustrated and just walk away. It never opens and "sees" all my photos.
Anyone else had this issue? Is it from the recent update? Thanks!Welcome to the Apple Support Communities
First, try plugging and unplugging the headphones again, and check that "Internal Speakers" appears in System Preferences > Sound > Output.
If it doesn't work, reset the PRAM > http://support.apple.com/kb/HT1379 This will reset the speakers settings, so it will work properly when you start in OS X. If not, open System Preferences > Sound > Output, and choose "Internal Speakers" -
Creative Cloud isn't recognizing my Photoshop needs an update to the CC 2014.2
Creative cloud isn't recognizing the latest update for photoshop. How can I update it?>
thanksRun the cleaner tool and reinstall from scratch.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium -
On IMac 10.9 After I import a movie file from the camera memory card to Imovie 10.0.1 it acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it works now? Anyone know? Thanks, Filippo
I would like to know this too. I imported a lot of files, then Imovie crashed. I went back in and they are not in imovie at all.
I reconnected the camcorder to import again and though they are still on the camcorder, I no longer see them in the available list of files to import. I'm sure there is some sort of simple setting somewhere that reveals all files even if it thinks they are imported.
Thanks -
Model Name: iMac
Model Identifier: iMac12,1
Processor Name: Intel Core i5
I reset my apple ID password here on the website, but my computer isn't recognizing my new password. what should I do? I just need to update my adobe flash player but it keeps asking me for my password but won't take my new password I just updated."If you've forgotten the Apple ID password how did you log in to make the last post?"
Exactly! The password I used to log on here and write my post I figured was the same Apple ID password I would use to reset my computer login password. But my computer isn't recognizing it as the correct password so it wont let me update my login password. I have 2 user accounts on my computer.
As far as the link you provided, I already looked to that for help earlier. It states:
Choose Apple menu > System Preferences, click Users & Groups, click the lock to unlock it, then provide an administrator name and password. Select a user, then click Reset Password.
I did these steps, but I don't remember my admin password. The question is: How do I reset my admin password so I can reset my log in password.
Is my admin password the same password I use to log onto this website to post questions? If so, like I said previously, I already reset that password and my computer isnt recognizing it. -
I had to get my hard drive replaced from Apple, I lost all of my music obviously. My question is, how can I get all my music off of my iPhone onto iTunes? Since it's a new hard drive, the iPhone isn't recognizing this as it's home computer.
You will need to use third-party software to transfer music from your phone to the iTunes Library. I recommend Phone to Mac - Pod to Mac | Macroplant.com.
-
I have an Ipod touch and when I connect it to my computer using a usb cord it isn't recognized, how can i get the songs that I purchased off of this iPod without syncing?
For Windows see http://support.apple.com/kb/TS1538
For Mac OS X see http://support.apple.com/kb/TS1591 -
My ipod nano isn't recognized on my computer any more. I bought new music and i can't get it to my ipod. I also bought a shuffle and the same thing happened.
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem
Maybe you are looking for
-
How can i store a picture file in a table using sql
can anyone help me to store a pic file in a table using sql
-
How i fixed my Itunes sound (windows)
Hello, I along with many members of this forum have been having serious sound issues. I have somehow managed to fix it tonight, as well at quicktime playing the distorted green videos. I did 3 things, and i dont know which 1 did it, but i encourage e
-
Using adapter specific message attributes in SOAP adapter configuration
Hi, Can you please let me know how to use adapter specific message attributes in receiver and sender SOAP adapter configuration. If possible , with example.
-
I am experiencing severe banding in Photoshop CC 2014. 5K imac, Nikon D810. 16 Bit Tiff in both Adobe RGB and Profoto RGB. It seems to be something new. OSX Yosemtie 10.10.1 It appears when using gradients. Help?
-
2013 Mac version 10.10 memory issue
Hey all, not enough free disk space? I got my mac w/ the 8GB memory almost full... I can't really save/download anything anymore. How can I use the space in the storage which is nearly 1TB... I clearly have room for stuff on there (?) Thanks... rooki