IMovie 8 and Titles?? Plz Help

How do you get a title for iMovie to go in the middle of a video clip. I like making youtube videos and would like to explain what certain things are is in the video.. but the problem is whenever i drag a title to the middle of a clip it does not put the title in... If there is any way of doing i would like to do it.
I find that if you put the title at the end and drag it to the clip point you want it works but it take way to much time
i do not know if i have to save anything but i would enjoy this because out of the whole imovie 08 the titles are the coolest part the app.
Thanks for Reading this if you know anything plz reply
-Nick

Drag the title to the top of the middle of the clip. Drag it to where you want the title to start. Then you can click on the title to give it focus and you can adjust the end point by dragging the right side of the title as a handle.

Similar Messages

Sir i have iphone 4s i brought second hand and i dont no icloud id and password plz help me

sir, i have apple iphone 4s i brought second hand and i dont no icloud id and password plz help me.
<Personal Information Edited by Host>

It's a bad idea to post your IMEI number and I've asked the Hosts to remove it.
If the phone had been locked by the previous owner only he can unlock it, either by providing you with the passcode or by removing it from his list of devices.
If you are unable to contact the previous owner and get him to do this then I'm afraid your phone cannot be unlocked and is useless; there is no way round this.

Did all the resets and still wifi connects and disconnects , plz help

did all the resets and still wifi connects and disconnects , plz help

I upgraded Apple TV late last week. Last weekend I rented a couple of movies from Apple TV. I watched one immediately, and was going to watch the other one the next day. On Sunday I opened up Apple TV to watch the film, and..... NOTHING THERE. I could see 'purchased movies', 'top movies', etc., at the top of the bar, but no mention of rentals. Even the film I'd watched (which obviously you can see for 48 hours) had disappeared into a black hole in Apple TV. I have been charged for these movie, and sent in a complaint.
My airplay seemed to be fine, but.... last night, my computer was not seeing an Apple TV or showing an airplay sing, so I restarted and the Apple TV and airplay sign returned. If I chose to watch the film on the computer it started up immediately, if I chose airplay, I got the first image of the film and the loading sign going on and on (round and round) forever. The film never started. I restarted my Apple TV, the same. I restarted the computer, the same. I tried with various programmes and no go.
iMore has the following suggestion. I am not sure if this will help. It sounds a PIA, but if I can't get airplay to work, I might try it: http://www.imore.com/how-restore-2nd-or-3rd-generation-apple-tv-back-factory-set tings-itunes

Hello I upgraed my iphone to ios 7 but its dosent work like app stor dosent install any brogram or update programs and its slow and stuck plz help me

Hello
I upgraed my iphone to ios 7 but its dosent work like app stor dosent install any brogram or update programs and its slow and stuck plz help me

My iPhone 5 wouldn't start after I turned it off a few minutes after writing this. It went into recovery mode and I had no choice but to connect to iTunes on PC and restore.
I restored to factory setting first, just to validate my phone was okay. For a second consecutive iOS update, the iPhone 5 did not update smoothly while connected to PC and iTunes - I had to retry two times before the progress bar for the update showed. (The exact same problem with the restart occured when I updated to 7.0.4.)
The good news is that I was ultimately able to restore the iPhone 5 to factory settings while running iOS 7.0.6. I did have a backup from about a month ago lying around and was able to successfully restore with that as well, so the damage done is almost negligible since I had my contacts, notes, mail, etc. backed up to iCloud.
Once I completed both restores, the sync with iTunes worked fine.

Error while trying to synchronize Audio and MIDI. plz help i cant hear anything

plz help me i cant hear nothing and its says: Error while trying to synchronize Audio and MIDI.
Sample Rate 38536 recognized.
Check conflict between Logic Pro X and external device. ???????? PLZ HELP

It means you are overtaxing the CPU, likely with just one (3rd party-)software instrument plugin. Ignore the word "external", in this context it often means "3rd party plugin".
So what synth is it? Since you're Dutch, it's probably one of the trancy dancy synths, such as Albino, Diva, Sylenth or Massive... I could be wrong though...
The best way to avoid this message is to Freeze the track with the guilty synner - however, a frozen track cannot be edited, so if that is a problem, you will have to make the synth itself run lighter, which can be achieved by turning of internal effects that are ON the synth itself, especially reverb.
http://help.apple.com/logicpro/mac/10/#lgcpf1cbfd51

We are unable to start your subscription plz help me ladies and gentlemen PLZ HELP ME!!!

i just need help because every time i type in my serial number it just says unable to start your subscription plz help me people

-LogiKzzz we will not able to solve this issue for you in a public setting as we will require personal information to resolve the issue. For the best assistance, I recommend our chat support at http://adobe.ly/rSZYR5. Our chat representatives can provide a personalized experience to resolve the issue you have described.

Hiii . i have encountere a problem . my notes app are not syncing in my ipad and iphone . plz help

hiii . i have encountere a problem . my notes app are not syncing in my ipad and iphone . plz help

Hi marcmartineau,
I'm not sure why this is happening, but I think I'm seeing the same thing. Many times when I get an email on the iPad or iPhone with a picture attached, I don't see the picture but instead just a placeholder icon.
I have found a work around though to at least see the picture. If I forward it and include the attachment, I see the picture in the outgoing email. I can even save the image from the sending email if I really don't want to send it. If i do send it to myself, chances are I will see the picture in the email when I receive it even though it's just a resend of the original.
weird.

About XML/XSL and Javascript : Plz Help Urgent

Hai , I am developing one module which invloves XML database ,XSL and Javascript.
In this I want to transform XML data to XHTML form using XSLT .,
I have done this ,(using xsl templates ,In my form two radio buttons one dropdown box and two text boxes are there .).
All the information which ever is displayed coming from XML .,
But I want to validate this elements (which are in xslt ,ie checking text box is empty or not ..)
Where I have to add script in XSL .,
Plz give simple example on this ,
I am sending this code ,plz have a look at this ,,
XML -----+ ---XSLT---------------> XHTML(HTML) (where validation is required)*
Hotels.xml
==============>
<Services>
     <Service>
          <Hotels type="radio" title="Hotel" groupname="service" default="true"/>
          <HotelsFlights type="radio" title="Flight+Hotel" groupname="service"/>
     </Service>
     <Hotels>
          <Destination title_d="Destination :">
               <DestinationPlace type="OPTION" id="" title_d="Select Destination" value_d="Select Destination" defalut="true"/>
               <DestinationPlace type="OPTION" id="" title_d="Aruba" value_d="Aruba" />
          </Destination>
          <HotelChoice title_hc="Hotels :">
               <choice type="OPTION" id=" " title_h="AmsterDam Manor Beach" value_h="AmsterDam Manor Beach"/>
               <choice type="OPTION" id=" " title_h="Wyndham Aruba Beach" value_h="Wyndham Aruba Beach"/>
          </HotelChoice>
          <Dates>
               <CheckIn type="INPUT" title_dt="Check In :" id="chkin" name="chkin" size_dt="10" maxlength="10">mm/dd/yyyy</CheckIn>
               <CheckOut type="INPUT" title_dt="Check Out :" name="chkout" size_dt="10" maxlength="10">mm/dd/yyyy</CheckOut>
          </Dates>
          <RoomNos title="No.of Rooms :">
               <room type="OPTION" id="" titl="1" valu="1"/>
               <room type="OPTION" id="" titl="1" valu="2"/>
               <room type="OPTION" id="" titl="1" valu="3"/>
          </RoomNos>
          <Submit tile="Search :" type="submit" id="search" value="Search"/>
     </Hotels>
</Services>
Hotels.xsl-
------------->
<?xml version="1.0"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="html"/>
<xsl:template match="/">
     <html>
     <head>
     <script language="javascript">
     function RadioFunc()
          var result;
          alert(" Radio ");
          result +=document.write("<TABLE >");
          result +=document.write("<TR><TD>"+'Praveen'+"</TD></TR>");
          result +=document.write("</TABLE>");
          alert("Result "+result);
     function validateForm()
          alert("Before validating");
          var chkindate= document.getElementById(chkin).value;
          alert(chkindate);
     </script>
     </head>
     </html>
     <xsl:apply-templates/>
<xsl:if test="@value_d='Select Destination'">
                    alert("Please Enter Destination");
          </xsl:if>
</xsl:template>
<xsl:template match="Services" >
     <form name="myform" action="two.jsp" method="get" >
          <table bgcolor="lightgreen" width="350" height="200" border="1" >
          <tr><td><xsl:apply-templates/></td></tr>
          </table>
     </form>
</xsl:template>
<xsl:template match="Service">
     <table border="0" align="center" valign="top"><tr>
     <xsl:for-each select="*">
          <td align="left"><xsl:value-of select="@title"/></td>
          <td align="center">
          <input type="{@type}" onClick="RadioFunc()">
               <xsl:attribute name="Name">
                    <xsl:value-of select="@groupname"/>
               </xsl:attribute>
               <xsl:attribute name="value">
                    <xsl:value-of select="@value"/>
               </xsl:attribute>
               <xsl:if test="@default='true'">
                    <xsl:attribute name="checked"/>
               </xsl:if>
          </input>
          </td>
     </xsl:for-each>
     </tr></table>
</xsl:template>
<xsl:template match="Hotels/Destination">
<xsl:value-of select="@title_d"/>
     <SELECT id="dest" name="dest">
     <xsl:for-each select="*">
          <xsl:element name="{@type}">
               <xsl:value-of select="@value_d"/>
          </xsl:element>
     </xsl:for-each>
     </SELECT>
</xsl:template>
<xsl:template match="Hotels/HotelChoice">
<xsl:value-of select="@title_hc"/>
<SELECT id="hcid" name="hcid">
     <xsl:for-each select="*">
          <xsl:element name="{@type}">
               <xsl:value-of select="@value_h"/>
          </xsl:element>
     </xsl:for-each>
</SELECT>
</xsl:template>
<xsl:template match="Hotels/Dates">
<table><tr>
<xsl:for-each select="*">
          <td>
               <xsl:value-of select="@title_dt"/>
          </td>
          <td>
          <xsl:element name="{@type}" >
               <xsl:attribute name="size">
                    <xsl:value-of select="@size_dt"/>
               </xsl:attribute>
               <xsl:attribute name="maxlength">
                    <xsl:value-of select="@maxlength"/>
               </xsl:attribute>
               <xsl:attribute name="value">
                    <xsl:value-of select="text()"/>
               </xsl:attribute>
          </xsl:element>
          </td>
</xsl:for-each>
</tr></table>
</xsl:template>
<xsl:template match="Hotels/RoomNos">
<table align="center"><th>Travellers</th>
<tr><td><xsl:value-of select="@title"/></td>
<td><SELECT id="rooms" name="rooms">
          <xsl:for-each select="*">
               <xsl:element name="{@type}">
                    <xsl:value-of select="@valu"/>
               </xsl:element>
          </xsl:for-each>
</SELECT>
</td></tr>
     </table>
</xsl:template>
<xsl:template match="Hotels/Submit">
     <table align="center" border="0" >
     <tr>
     <td align="center">
          <input type="{@type}" onclick="validateForm();">
               <xsl:attribute name="value">
                    <xsl:value-of select="@value"/>
               </xsl:attribute>
          </input>
     </td>
     </tr>
     </table>
</xsl:template>
</xsl:stylesheet>
======================================================

Hi
This is not the forum for this type of question ...sorry. Try the XMLDB forum, XML DB
Tim

Imovie and Ipad2 crashing, help!

When using Imovie on the Ipad 2, whenever I try to import photos from Iphoto nothing shows up, then when I try to grab a photo from camera roll, it crashes Imovie. Location settings are on.
any suggestions?
thanks,
pat

Thanks for letting me know that you found my iSight info helpful, brimx
From your subsequent posts, you seem to have determined that it is unlikely that iSight is the cause of your problems.
With new, different, and unrelated problems appearing across different applications every couple of hours, your software may be damaged.
It is also possible that your hardware is failing, so backup your important files now!
I do not use iNtel Macs or Windows, so I do not know, nor can I test, the answers to your latest questions.
If you do not get the answers you need here and cannot find them in Apple's Intel-based iMac Support page and Boot Camp Support page, you may want to service help from your retailer, Apple, or an Apple-Authorized Service Provider. You will certainly want to get these problems corrected while your Mac is still covered by warranty.
If you want to continue to try to resolve the problems yourself, search or start new topics in the Using your Intel-based iMac Forum.
Because you have such widespread trouble, I would suggest that you concentrate in the iMac forum, but if you can narrow down the problems to one or two issues, you could post in the appropriate forum regarding Boot Camp, Front Row, or Installing & Using iPhoto '08.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

Plot function and Interpolate Plz Help!!!!

Im trying to obtain a plot from the following function ( see attached file) a I-V curve and then from the plot i wanna determine values for "I" when values of V are specified. I wanna do this without using cursers but programmatically.(possibly using interpolate functions) .. I hope someone can help me..thanks a lot
Attachments:
eq.JPG ‏10 KB

lil_zu wrote:
...is it possible to plot this function without solving?
No! You cannot plot a function unless you can solve it (either analytically or numerically).
Do you have an image of how it is supposed to look like?
What are typical ranges for I and V?
Do you have a link to a website that explains your application?
LabVIEW Champion . Do more with less code and in less time .

I forget my iphone 5 passward and i cant remove the ownership passward and so plz help me this topic coz what can i do?

i forget my iphone 5 passward and i can't rem ove it because i update the software and when my phone finally done then asking the ownership passward so i forget it. so what can i do i solved this probleum. thanks
i buy this phone in my friend so my friend is not here so i will be waiting your cute answers
thank's

Hi bilalusman,
If you are having issues with the password on your iPhone, you may find the following article helpful:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Regards,
- Brenden

When I use VPN on iPad 2 ,it disconnects alot and frequently,plz help me

Hi friends,when I use VPN on my new iPad 2 ,the VPN disconnects a lot and frequently in short periods,please help me,is there any solution???

You should provide more detailed info, like who is your VPN provider, what VPN protocol (PPTP, L2TP, IPSec,) whether you're on home Wi-Fi, public Wi-Fi, 3G and if public Wi-Fi or 3G, then geographical location. (i.e.: Starbucks on 5th & Broadstreet, Detroit.)

My touchpad does not work wiel the keyboard is active #minecraft and gaming plz help.

Hello I would like to ask a question, question for the sake of all gamers WHY CANT I LOOK AROUND WIEL MOVING IN GAMES LIKE MINECRAFT , GUILDWARS, WORLD OF WARCRAFT ALL OF THOSE GAMES REQUIRE YOU TO LOOK AROUND WIEL ADVENTURING.But no my new HP Pavilion wont disables my touch pad for some reason wiel my keyboard is active ! No thanks.....
Please help me figure this out I have tryed settings but I cant really find anything so your Answers will help Me and other fellow gamers who have boaght new Hp's.
Thanks -NorthOp1909

HI @KnowGamesOrNo
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
How Do I Find My Model Number or Product Number?
I grasp that you would like to disable the touchpad while playing games as it is causing interference.
Here is a link to Using and Troubleshooting the TouchPad or ClickPad (Windows 8) that should aid in that endeavor.
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

My hp mini 110: bios update screen is displayed but the process repeats again and again, plz help

My HP mini 110-3107tu: At startup HP Bios update screen is displayed with message "The system BIOS is being recovered"....Writing new BIOS image.....
Next message is displayed Verifying new BIOS image...
Thereafter "The System BIOS recovery is complete" message appears. But this process repeats again and again. Please help.
Is there a solution, how i can recover my netbook or should I take it to the service center

I have searched far and wide for a workaround that does not involve sending it to HP. Unforunately, I was not able to find such a workaround.
As a last effort, you can try these steps.
1. Power off the notebook completely.
2. Hold the windows key + b keys simultaneously.
3. Power the notebook on while holding those keys and keep holding them.
4. Let the keys go when you get a message about BIOS recovery.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

SharedObject and hitTestObject plz help!

Hi,
Im trying to get Flash to rember if the logo_mc has been hitTested with the holder, and if it has when the movie is played again it appears in the box
and not the original spot.
var mySO:SharedObject = SharedObject.getLocal("ObjectPlace");
var logo_mc:Sticker = new Sticker ;
addChild(logo_mc);
mySO.data.my_x = logo_mc.x = 150;
mySO.data.my_y = logo_mc.y = 100;
if (! mySO.data.my_y)
logo_mc.x = 150;
logo_mc.y = 100;
logo_mc.addEventListener(MouseEvent.MOUSE_DOWN, onDown);
function onDown(e:MouseEvent):void
var my_mc = e.target;
my_mc.startDrag();
logo_mc.addEventListener(MouseEvent.MOUSE_UP, onUP);
function onUP(e:MouseEvent):void
logo_mc.stopDrag();
if (logo_mc.hitTestObject(holder))
logo_mc.removeEventListener(MouseEvent.MOUSE_DOWN, onDown);
removeChild(logo_mc);
holder.addChild(logo_mc);
logo_mc.x = 15;
logo_mc.y = 10;
mySO.data.my_x = logo_mc.x;
mySO.data.my_y = logo_mc.y;
else
mySO.data.my_x = logo_mc.x = 150;
mySO.data.my_y = logo_mc.y = 100;
mySO.flush();
Thanks Pavel

Think I got it working
var mySO:SharedObject = SharedObject.getLocal("new");
//mySO.clear();
logo_mc.x = mySO.data.my_x;
logo_mc.y = mySO.data.my_y;
trace("! mySO.data.my_x = " + ! mySO.data.my_x);
trace("mySO.data.my_x = " + mySO.data.my_y);
if (! mySO.data.my_x)
trace(mySO.data.my_x);
trace("no hit");
logo_mc.addEventListener(MouseEvent.MOUSE_DOWN, onDown);
logo_mc.addEventListener(MouseEvent.MOUSE_UP, onUP);
logo_mc.x = 150;
logo_mc.y = 100;
if (logo_mc.hitTestObject(holder))
trace("hit");
logo_mc.removeEventListener(MouseEvent.MOUSE_DOWN, onDown);
logo_mc.removeEventListener(MouseEvent.MOUSE_UP, onUP);
else
logo_mc.addEventListener(MouseEvent.MOUSE_DOWN, onDown);
logo_mc.addEventListener(MouseEvent.MOUSE_UP, onUP);
//logo_mc.x = 150;
//logo_mc.y = 100;
if (logo_mc.hitTestObject(holder))
trace("hit");
logo_mc.removeEventListener(MouseEvent.MOUSE_DOWN, onDown);
logo_mc.removeEventListener(MouseEvent.MOUSE_UP, onUP);
function onDown(e:MouseEvent):void
var my_mc = e.target;
my_mc.startDrag();
function onUP(e:MouseEvent):void
logo_mc.stopDrag();
if (logo_mc.hitTestObject(holder))
trace("hitTestObject");
logo_mc.removeEventListener(MouseEvent.MOUSE_DOWN, onDown);
logo_mc.removeEventListener(MouseEvent.MOUSE_UP, onUP);
logo_mc.x = 435;
logo_mc.y = 68;
else
trace("else");
logo_mc.x = 150;
logo_mc.y = 100;
mySO.data.my_x = logo_mc.x;
mySO.data.my_y = logo_mc.y;
mySO.flush();

Ipod touch and games, PLZ HELP!!!!!!!!!!!

on the itunes store it says that ipod games work with all video ipods, do the games work with the ipod touch?
Message was edited by: scottyrod

At present the web-based games are the only ones available:http://www.apple.com/webapps/games/
WiFi access is required for these web-apps. Games from the iTunes store will not work.
Later next year, after Apple releases the Software Development Kit to developers in February, it's likely that games will start to become available.
regards
mrtotes

IMovie 8 and Titles?? Plz Help

Similar Messages

Maybe you are looking for