IMovie 9.0.9 sound does not play
Have gone back to iMovie 9.0.9 due to DVD burn issues with later version.
Been working hard on a movie of trip to Holy Land and have selected three songs for the pictures used so far. Until today, the songs all worked great, but today (computer has NOT been turned off) all of a sudden there is no soundtrack audible. I can see it, but no sound during playback. Ideas? Thanks
Hi Douglas,
Welcome to Apple Support Communities.
Take a look at the article linked below, it provides tips that may be able to resolve the sound issue in you iMovie project.
iMovie is missing audio on import, export, or playback
http://support.apple.com/kb/ts2289
Cheers!
-Jason
Similar Messages
-
I am getting no sound on my macbook pro. The sound does not play when I plug in headphones either. I have tried making it louder quieter, restarting my computer, HELP!
There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. If your model has an audio-out (headphone) port, and anything is plugged in, unplug it before putting the system to sleep.
3. If you've installed something called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and reboot. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed an equalizer called "Boom" or anything similar, update or delete it and reboot.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Reboot and test.
9. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
10. Reset the NVRAM.
11. Reset the SMC.
12. Reinstall OS X after backing up all data. For a possible shortcut, see this thread.
13. Make a "Genius" appointment at an Apple Store. -
Imovie iDVD finished but DVD does not Play in ALL DVD players?
I have made several DVD movies over the years and sometimes when i go from imovie> idvd> finished DVD
1. it does not play in ALL dvd players? why?
2. or sometimes plays in some DVD players?
3. sometimes plays in computer( apple) dvd but not always?
Is there something i have to due before, after or during rendering so that the finished DVD plays in all DVD players
thanksHi
*I do put paper labes on discs --*
NEVER DO THAT - The ability to get them perfectly centered is near to impossibly
DVDs are many tims more sencitive to missaligmement by 1/100 or 1/1000 of a millimeter.
CDs often can handle this - but still not advicably.
I do.
• Use only Verbatim (Taiyo Yuden - also recommended by many - no own experience)
• DVD-R (no +R or +/-RW)
• Burn at an as slow speed possibly eg x1 with iDVD08 or higher or Roxio Toast™
or Apple Disk Util tool
• NEVER under 25Gb free space on internal boot hard disk (others not important)
• I use a Cleaning-DVD from time to time
• I burn max 3 DVD at a time then cool for 20min
• I use the Cleaning DVD on my other players as well
On Quality.
*DVD quality*
1. iDVD 8 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies up to 120 min.) - BEST
• Best Performances (movies less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08) / Best Quality (in iDVD6) (movies up to 120 min.) - slightly lower quality than above
2. From
• FCE/P - Export out as full quality QuickTime.mov (not selfcontaining, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 this can also be set)
This can also be done with (Apple) Disk Util tool.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while befor next batch.
iDVD quality also depends on:
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JESDeinterlacer3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS: They are plabacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD08
Pro Quality (only in iDVD08)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choise)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD08
2. Project info: Select Professional Encoding - only in iDVD08.
Region codes:
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes:
1 = US
2 = EU
Yours Bengt W -
I am playing recorded video from a Sony HDR-HC1 through the DV out and capturing in on location. All goes well(except for some red frame video) during capture, good video and audio. I captured three times. On one occasion the audio played back. The other two it did not. Audio will not play back in PP CS3. The file is an AVI T2. The same clips play back fine in Edius 3.6 with good sound.
Any tips on what is wrong?
KentHey There and Welcome to the mac forum!!!!
Could it be possible that you moved or even trashed the audio files you were using? If so then they get trashed in imovie to.
Next time, transform the movie into a Quicktime movie (once you are completely done the project). Once you have done this, you can move or even trash any of the elements of your movie (even the footage) but this will make your actual imovie project useless (The Quicktime one will be fine).
I hope this helps,
-Hooked -
In Flash, the sound only plays if the file is started from the beginning. The sound doesn't play if starting from anywhere other than the beginning.
This is very frustrating when trying to sync the animation with the sound as it's not possible to scroll back and forward with the sound playing. The only way the sound works is if it is started from the beginning.
If anyone can help that would be fantastic.
ThanksHi Jeromie,
Many thanks for your help. Here is some additional information, which may shed light on the problem.
I am using Flash Professional CC 2014.0 release, Build 14.0.0.110
The computer I'm using is then iMac running OSX version 10.9.3 Build 13D65 2.7 GHz Intel Core i5
I am using Flash, not a web-based editor that leverages Flash Player.
"a direct link to the project or tool would be useful in allowing us to attempt to reproduce the problem" - Not sure how to do this, how can I add the project to the forum?
Many thanks once again for your help, let me know if you need more information.
Cheers
Michael -
IMovie '11 v9.0.9 Does Not Play Anything
iMovie '11 v9.0.9 doesn't play anything. It won't play projects, it won't play events from the library. Nothing. When it starts, it asks to generate thumbnails. I select yes, and it does nothing for hours. The activity monitor shows < .5% CPU usage during that time.
I'm running iMovie '11 on a Late 2006 24 inch 3 GB RAM with 1.5 TB free hard drive space on OSX 10.7.5 with all updates completed.
Suggestions are gladly welcomed.
Happy HolidaysAnyone???
-
Sometimes Sound does not play when playing multiple Sounds simultaneously
This is also a best practices question, too.
I built a game that uses a lot of different sounds (about 48 I think). Many are short, less than a second, and a few are longer, music cues, etc.
Example problem: Sometimes when there are a lot of sounds playing and a music cue is suppose to fire, the music sound doesn't play. I made a trace on the function that plays the music sound, and that function does execute. Are there limits on how many sounds can be playing simultaneously? (This doesn't only happen to a particular sound , could be any sound)
Also, as far as best practices, If there is a sound that could be played multiple times simultaneously, should a new instance of that sound be created each time its played? If there is only one instance of that sound, will the previous playing of that sound be cancelled when called to play again?
Thanks,
AdamThanks.
I guess I could add channels to an array as they start and remove them from the array when they are done playing to keep track. That way when an important sound, like a music cue, is suppossed to play I can check the array stop enough sounds to allow the music cue to play. Hopefully it wont be too much overhead with all those listeners. -
I don't know if I have posted this on a correct location (kinda new here).
I am trying to demonstrate the effect of multiplying a constant to a waveform. I have a sound file read by Sound File Read Simple.vi. Then I am trying to scale the amplitude of the signal by a constant number. I've tried three methods for this: the Numeric Multiplication, the express VI Scaling and Mapping, and the scaling and conversion VI of Signal Express. The waveform shows that the amplitude of the scaled signal is indeed scaled, but when played thru the play waveform VI, the sound level is still the same, no matter how much I am scaling the input. Does anyone why is this so? Also, I really wanted to show that scaling an audio waveform results in a louder waveform. How do I do this? As much as possible, I've wanted to use simple VIs as the class is an introduction to signal processing and the students (and so am I) are still finding our way into LabVIEW (we used to use MATLAB in the course).
Attachments:
scaling.vi 69 KBJaymeW wrote:
Hi kirkbardini,
According to this article about Low Volume From Sound VI, you can use a scalar multiple to increase the volume of a sound saved to a .wav file, so you should be able to do this before playing it. Does that not work for you?
That information is for Labview 7.x and hence outdated. As mentioned before. Labview do a normalization before sending data to the sound card. As you know sound cards are most often 16 or 24 bits. And in most cases data input to a sound card is in DBL type. After normalization the data is converted so the floating point value 1 represent full scale output on data sent to the the sound card DA. To get any further I suggest kirkbardini take the time needed to send us his/hers current code. Then we may solve things from there
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far) -
When I create my movie on iMovie it plays great. Then I try to burn it to a dvd and it doesn't play well on the dvd. It either gets stuck at parts or slows down or skips a little. I try to save it to my theatre and burn it that way. Or I have added it to my documents and burned it that way. Either way worked. Any tips, ideas, help or solutions would be very much appreciated. This is driving me crazy and i am wasting so many dvds! Thanks!
bertjones00 wrote:
It reads other DVD's just fine. I've tried playing commercial DVD's and homemade movies and they all work just fine. I'm also able to create and read data discs with no problem. I'm only having trouble playing this one particular DVD movie. I'm able to play the movie in my PS3 with no problem and can play it in a regular HDMI DVD player. I'm not sure if my computer doesn't recognize the encoding for the movie or if I need to download another type of software to play the movie. Someone suggested that i try using PowerDVD to see if it could play the movie.
Ok then tell me this what is that DVD your having problem watching then? And what Region Code are you from like Euro is Region 2 and so on??? Could be the Region problem on the DVD doesn't match your drive Region as well?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015- -
Sound does not play with most of my clips
How do I get the sound to work on video clips? Some do and some do not. I unclicked Draft mode.
Not much we at Adobe can do to get the AC3 codec installed on your computer, we don't produce it. But someone else on the forum here may have some tips to help you out. All I would suggest is following the same basic troubleshooting steps used to help installed Adobe products. But if you are getting an error message, I'd start by searching the internet for it.
-
I'am creating a movie in my Mcbookair I realised that when add a background music, or even effects from the software, the imove does not play it. it plays only the video sound.
can someone help me?Sorry but reset is probably the best root
But as for music player crashing with 200 songs, that is not your problem !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' -
HM1200, BH99b, JabraBT2045 bluetooth headsets do not play music from ipad, ipod touch 4th generation, although it does pair ok. Why is that if it is compatable, why it does not play any music or sound via bluetooth headsets. When I pair the headsets to Mac it does play music via bleutooth headsets! Please help me! Also, how to connect several or two bluetooth headsets to one device: Mac, or iPad iPod touch 4th generation? Please, reply as soon as possible!
Your iPad has built-in WiFi. You cannot and don't need to use the USB dongle.
Look in Settings > WiFi. Find the SSID of your wireless router, tap it's name and enter the WiFi password. -
I created in iMovie, and extracted audio from one of the clips to use in the title sequence. All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?
I am on a MacBook Pro with OS 10.6.7 running iMovie '11 and iDVD 7.1.1. Thanks for any input.
-
Hello to everybody,
the following problem occurs:
after transferring the whole Macsystem (MBP 2010) to a new model (MBP2014) I have a problem using Adobe Audition. It does not play any sound, when starting a window tells me, that some hardware has changed, audio channel assignment says unknown... the audio devices are found..
btw: Adobe Premiere does work, it plays the video as well as the audio. I already killed Audition and re-installed it... but no changes, what can I do?
Thanks for any ideas.
ArneAsk in the AU forum and be much more specific, beginning with what version you actually use.
Mylenium -
Video does not play, sound does
I recently upgraded to iLife 09 and iMovie 09 and am having trouble. I downloaded my .mts files to my MacBook and then converted to .mov at 1280 x 720 using Voltaic. They play fine in QuickTime (though the sound and audio do seem just a wee bit off). When I import to iMovie ... the clips do not play. Audio plays. I select "Large Files" instead of original.
MacBook
OS X 10.6.3
2 GHz Intel Core 2 Duo
1.5 GB 667 MHZ DDR2 SDRAM
iMovie 09
Canon Vixia HF20I'm going to answer my own question for those searching with the same problem. I really do not know why, but using Voltaic to convert to .mov, which produced some pretty high quality but large files, didn't work well with iMovie 09 (worked fine with 08). When I converted to MP4, which resulted in a much smaller file, it worked but quality of course suffered.
The good news is, I no longer need Voltaic with 09 because it converts my HF20 files on import if you just connect the camera. Quality is good.
I suspect the problem is sheer size. 09 must have greater computing needs and that combined with the large .mov files, the MacBook just couldn't keep up. But that's a guess.
Maybe you are looking for
-
How can I execute an IE browser window from within my java application?
I am programming a java application that requires me to execute a browser application and point to a specific web site. How can I do this? I cannot seem to find any examples on the web.
-
Passing parameters for a query throught XML and capturing response in the same
Hi All, I have defined a RequestParameters object and i am passing paramerts for a query through XML and trying to capture the result in the same and send back to the source. In this case i am send XML from excel. Below is my XML format. <?xml versio
-
My settings menue is in chinese language (help)
Whenever i enter my settings menu for the new (webcam live ultra for notebooks) all the words are in japanese or chinese. How can i get these to be displayed in english? thanks' leo kowal
-
Sax parser returned an exception while trying to print/export in PDF
Hi all , I am getting an error as below when I am trying to export and print my report in PDF and also into POWERPOINT. Sax parser returned an exception. Message: Entity 'nbsp' was not found, Entity publicId: , Entity systemId: , Line number: 40, Col
-
Can't Run my programs on Win2000
Hi I developed a program on my win. 95 computer with JDK1.2. It worked fine on my Win95 PC but it doesn't run on my Win 2000. When try to run the appletview I get an error message that says,"The exception unknown software exception (0xe06d7363) occur