Imovie 9.0.9 wont import my ipad 2 imovie project. How do I import my project and finish it on my mac?

I have an Ipad 2 and I made a trailer using the imovie. I imported it to itunes but when I open up my imovie on my mac and try to open it, I get an error saying it cant import. Am I doing it wrong? I want to edit it on my mac because of the stupid zoom feature that cuts off the sides of the video.

Hi Craig,
I also got the second problem. The storyboard on iMovie trailer has all these missing videos. If I import them on my iPad it doesn't find them.
If you find a solution it would be much appreciated to share it here ... I'll do the same.
Thanks,
Rafael

Similar Messages

I recently got a new computer and it wont sync with my ipod. How can i get my music and stuff on my computer

I recently got a new computer and it wont sync with my ipod. How can i get my music and stuff on my computer?

iPods and other iDevices are not backup or storage devices.
Copy the ENTIRE iTunes folder (and all other desired data) from the old computer to the new computer.

My iPad was stolen, how can I have it blocket and/or send to the iPad a message to get it back

My iPad was stolen, how can I have it blocket and/or send to the iPad a message to get it back

If you enabled Find My iPad on it before it was stolen, and if it is still turned on and connected to the internet with Find My iPad enabled, you can do this by going to icloud.com as explained here: http://help.apple.com/icloud/#/mmfc0f0165.

Hi, I am trying to download IOS7 to my ipad. The programme has locked at the 'Choose a Wif-Fi network' page, a box says 'joining other network' but the page is greyed out and can't move from it. How can I clear this screen and finish the download. Thanks

Hi, I am trying to download IOS7 (not sure if it's 1 or 2) to my ipad. The programme has locked at the 'Choose a Wif-Fi network' page, a box says 'joining other network' but the page is greyed out and can't move from it. How can I clear this screen and finish the download. Thanks

Hello Den53,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430?viewlocale=en_US
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
Best of luck,
Mario

How can i import photos from ipad to itunes, how can i import photos from ipad to itunes

How can I import photos from my iPad to iTunes on my Windows Vista PC?

I'm puzzled! I had received a set of jpg files through an e-mail on my ipad. For reasons unknown to me, they got saved to my (only) album, that had an irrelevant name. When I tried to change the name of the album, I received a message that I could only change the name of the album after importing them to the computer where (as I recall) iTunes resided. After much huffing and puffing, I managed to import the photos, to the Windows computer, but they wound up in a Windows Photo Gallery directory, where I put them into an appropriately named album. Now, how do I get them back to the iPad. (I also learned, I think, that iTunes will have nothing to do with the photos.
Roger

SC import fails with "import successfully" in log. How to perform import?

Hello SDN!
I can't import SC SAP-SHRWEB.sca from Development to Consolidation system. At firts import process was finished with 'import failed' state and with followed log:
20080416094446 Info   :Starting Step Repository-import at 2008-04-16 09:44:46.0570 +6:00
20080416094446 Info   :Component:sap.com/SAP-SHRWEB
20080416094446 Info   :Version :MAIN_CRM50VAL_C.20060914085157
20080416094446 Info   :1. propagation request is of type TCSSoftwareComponent
20080416094457 Info   :Propagatable:0af61b4e430511db8c9d0030057116fe exists allready in the repository. No import necessary.
20080416193724 Fatal :VcmFailure received
20080416193724 Fatal :caused by Exception:com.tssap.dtr.client.lib.deltavlib.VcmFailure: Not Ready [(pre||post)-condition failed: Not Ready]:Not Ready [(pre||post)-condition failed: Not Ready]
com.tssap.dtr.client.lib.deltavlib.VcmFailure: Not Ready [(pre||post)-condition failed: Not Ready]
     at com.tssap.dtr.client.lib.deltavlib.impl.AbstractCommand.checkedExecute(AbstractCommand.java:196)
     at com.tssap.dtr.client.lib.deltavlib.impl.VersionSet.integrate(VersionSet.java:160)
     at com.tssap.dtr.client.lib.deltavlib.impl.VersionSet.integrate(VersionSet.java:148)
     at com.sap.cms.tcs.client.DTRCommunicator.integrateChangelist(DTRCommunicator.java:544)
     at com.sap.cms.tcs.core.RepositoryImportTask.integrateResource(RepositoryImportTask.java:816)
     at com.sap.cms.tcs.core.RepositoryImportTask.processRepositoryImport(RepositoryImportTask.java:367)
     at com.sap.cms.tcs.core.RepositoryImportTask.process(RepositoryImportTask.java:651)
     at com.sap.cms.tcs.process.ProcessStep.processStep(ProcessStep.java:77)
     at com.sap.cms.tcs.process.ProcessStarter.process(ProcessStarter.java:206)
     at com.sap.cms.tcs.core.TCSManager.importPropagationRequests(TCSManager.java:447)
     at com.sap.cms.pcs.transport.importazione.ImportManager.importazione(ImportManager.java:176)
     at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.execImport(ImportQueueHandler.java:500)
     at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.startImport(ImportQueueHandler.java:113)
     at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImport(CmsTransportProxyBean.java:648)
     at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImport(CmsTransportProxyBean.java:620)
     at com.sap.cms.pcs.transport.proxy.LocalCmsTransportProxyLocalObjectImpl0_0.startImport(LocalCmsTransportProxyLocalObjectImpl0_0.java:1742)
     at com.sap.cms.ui.wl.Custom1.importQueue(Custom1.java:1432)
     at com.sap.cms.ui.wl.wdp.InternalCustom1.importQueue(InternalCustom1.java:2815)
     at com.sap.cms.ui.wl.Worklist.onActionImportQueue(Worklist.java:978)
     at com.sap.cms.ui.wl.wdp.InternalWorklist.wdInvokeEventHandler(InternalWorklist.java:2866)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
20080416193725 Fatal :caused by Exception:com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: VcmFailure received: Not Ready [(pre||post)-condition failed: Not Ready]:communication error: VcmFailure received: Not Ready [(pre||post)-condition failed: Not Ready]
com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: VcmFailure received: Not Ready [(pre||post)-condition failed: Not Ready]
     at com.sap.cms.tcs.client.DTRCommunicator.integrateChangelist(DTRCommunicator.java:563)
     at com.sap.cms.tcs.core.RepositoryImportTask.integrateResource(RepositoryImportTask.java:816)
     at com.sap.cms.tcs.core.RepositoryImportTask.processRepositoryImport(RepositoryImportTask.java:367)
     at com.sap.cms.tcs.core.RepositoryImportTask.process(RepositoryImportTask.java:651)
     at com.sap.cms.tcs.process.ProcessStep.processStep(ProcessStep.java:77)
     at com.sap.cms.tcs.process.ProcessStarter.process(ProcessStarter.java:206)
     at com.sap.cms.tcs.core.TCSManager.importPropagationRequests(TCSManager.java:447)
     at com.sap.cms.pcs.transport.importazione.ImportManager.importazione(ImportManager.java:176)
     at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.execImport(ImportQueueHandler.java:500)
     at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.startImport(ImportQueueHandler.java:113)
     at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImport(CmsTransportProxyBean.java:648)
     at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImport(CmsTransportProxyBean.java:620)
     at com.sap.cms.pcs.transport.proxy.LocalCmsTransportProxyLocalObjectImpl0_0.startImport(LocalCmsTransportProxyLocalObjectImpl0_0.java:1742)
     at com.sap.cms.ui.wl.Custom1.importQueue(Custom1.java:1432)
     at com.sap.cms.ui.wl.wdp.InternalCustom1.importQueue(InternalCustom1.java:2815)
     at com.sap.cms.ui.wl.Worklist.onActionImportQueue(Worklist.java:978)
     at com.sap.cms.ui.wl.wdp.InternalWorklist.wdInvokeEventHandler(InternalWorklist.java:2866)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
20080416193725 Info   :Step Repository-import ended with result 'fatal error' ,stopping execution at 2008-04-16 19:37:25.0338 +6:00
I applied note 989010 and reimport SC. File processed about 5 hours and after that it still have 'import failed' state but in the log there is a message:
20080417124350 Info   :Starting Step Repository-import at 2008-04-17 12:43:50.0291 +6:00
20080417124350 Info   :Component:sap.com/SAP-SHRWEB
20080417124350 Info   :Version :MAIN_CRM50VAL_C.20060914085157
20080417124350 Info   :1. propagation request is of type TCSSoftwareComponent
20080417124351 Info   :propagatable:0af62b4e430511db8c9d0030057116fe not known in repository:http://UIT-EP-01:51000/dtr
20080417124351 Info   :Import propagatable:0af62b4e430511db8c9d0030057116fe from archive:SAP-SHRWEB into repository:http://UIT-EP-01:51000/dtr
20080417124351 Detail :start of importing propagatable:0af62b4e430511db8c9d0030057116fe to repository:http://UIT-EP-01:51000/dtr
20080417124359 Info   :Propagatable:0af61b4e430511db8c9d0030057116fe imported successfully.
Please help me to import this SC or provide me a detail way how to clean DTR, my track and other that may be necessary to clean from SC and reimport all SCs again.
Regards, Lev

Hi Lev,
To your question to clear the track
You can delete your track as described in the below link, and then recreate the track and reimport.
Link: [Deleting Track|http://help.sap.com/saphelp_nw70/helpdata/EN/33/71fe94e1834af8b5bd3c0e1de5ab41/frameset.htm]
Do not forget to delete DTR workspace.
Do reward points if you find the link useful.
Cheers,
Sandeep

HT4236 as per my earlier question about deleting duplicate pictures from my Ipad- You asked how they were imported- I imported my pictures from my camera to my MacBook and then synched. suggestions have not worked to remove pics. hopefully something will

In response to all of your responses. I imported my pictures from my camera- that worked fine. I tend to use Iphoto.
Then I synched my MacBook and Ipad 2, that worked fine except when I synched my Ipad for it's normal 2 week synching it copied the pictures again. Now I want to get rid of the duplicates/triplicates- my albums were also broken up and need to be reorganized. I have tried all of your suggestions - thank you-
have gone to the Apple store with no success.
highlighting the pictures and then hitting delete does not work.
Trying to delete them thru my Mac does not work
highlighting and then going to edit does not have a delete
Did not find Image Capture in apps.
Any other suggestions would be appreciated.
Geri

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

HT204022 i had an ipad and mac air,,my concern is all my photos from my iPad is still there i already tried to delete and transfer it to my mac air but still some of photos from photo stream still in my iPad how can i completely delete all photos from my

im having a prob on how to tranfer all my photos from my ipad including the photostream and completely delete all my photos in my ipad,,help,,

im having a prob on how to tranfer all my photos from my ipad i
To transfer your photos:
Transfer and erase the Camera Roll:
Connect the iPad to your computer and launch Image Capture, iPhoto, or Aperture.
Select your iPad in the Devices list and click "Import all".
When the import finishes, you can erase the contents of the Camera Roll, if you want. That would be the quickest way, but deleting it on the iPad in the Photos.app would be safer, but more work.
Delete photos and video clips you synced to your computer using iTunes: Connect your device to your computer and, in iTunes, deselect the photos and video clips you want to remove from your device. Click Apply, and click Sync.
Delete the Photo Stream contents:
How do I delete photos from My Photo Stream?
You can delete photos from your photo stream the same way you delete other photos from your iOS device or Mac. Just select the photos you want to remove, and tap the trash can icon or click Delete. On your PC, select the photos you want to remove from your photo stream, right-click, and then select delete. When you delete a photo from Photo Stream on one device, iCloud will automatically delete it from the Photo Stream album or view on your other devices. Learn more about deleting photos.
-- Léonie

How do you transfer ical data and address book from a mac back up to an ipad?

I have a HD back-up from my mom's dead imac g5.
I am sending her an iPad, and would LOVE to have here Address Book and iCal data so she has that all set up.

If you want to transfer a large amount of files, the best way would be to use an external drive. If you do not have one, consider the option of using Target Disk mode, so you just have to get a Thunderbolt cable; this is the fastest option.
To use Target Disk mode, connect the Thunderbolt to the MacBook Air and the MacBook Pro. Then, start up your MacBook Pro and hold the T key while it is starting up until you see the Thunderbolt icon in the display. Now, go to the MacBook Air, open a Finder window and you will see the MacBook Pro hard drive in the sidebar, so access to them and transfer the files you want to.

When your ipad is disabled how to connect it to iTunes and get the password

Please help!!!

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I just bought my first mac computer and want to transfer music, photos and movies from my ipad 2. how do i do that?, I just bought my first mac computer and want to transfer music, photos and movies from my ipad 2. how do i do that?

I just bought a mac computer. I have had an ipad 2 and want to transfer the music and photos from the ipad to the mac. Can i just hook up the ipad to the computer or is there something else I need to do or buy? Thanks

>download "minamp"
>google "winamp plug in apple ipod"
>Install both
>plug Ipad into computer and you will be able to transfer files off pad.
Worked with my Ipad version 1 not sure about 2.
Wouldn't be easyier for transfering files from computer to computer?

I have 1 iphone (work), 1 ipad (personal), 2 itunes accounts (1 personal, 1 work), and 2 computers (1 personal-mac, 1 work-pc), how do/can I use stuff from both accounts on the iphone and ipad?

any suggestions would be most appreciated!

Yes!
Luckily, if you be very careful and pay attention to what you have selected in itunes, you can separate these things
Basically, in iTunes, there are tabs at the top for Summary, info, apps, etc..
These tabs control PER DEVICE what syncs between itunes and the device.
Therefore, you can plug iPhone 4S #1 in, and select to sync contacts with address book, then do so. Then plug iPhone 4S #2 in, and not choose to sync with address book. iTunes will keep these settings separate. However, in that situation for music and apps, you would check to sync both on both, in order to get all music and apps on each.
The only thing to watch out for, each computer 'user' has only one set of address book and ical, meaning that if you want to sync both phones to the computer, but dont want to mix contacts, only one phone will be able to sync contacts and/or calendars. Basically, each category in the Info tab will only hold one device's information, so you CAN do contacts with iPhone 4S #1, and calendars with #2.

When I upgraded from LR 3.6 to LR CC none of my "Print Module User Templates" were imported to LR CC. How do I import these template?

If anyone can help it would be much appreciated. Thanks Darold

If anyone can help it would be much appreciated. Thanks Darold

How do i import a 5h recording?, how do i import a 5h recording?

It seems i am limit to a 2h recourding when i try to bounce it

Is this an audio recording?
If so, reduce Logic's tempo to the lowest number possible and see if that does it.
This used to be a fix years ago but I thought the "number of bars" limitation was lifted a long time ago.
What version of Logic are you using.

How do I import movies from camera?

Hi.
I have a Lumix FZ38 camera. Although iPhoto 6 does not recognise the make or model, it does at least let me import still photos.
But how do I import movies? They are in "Motion JPEG" format, but neither iPhoto, Quicktime or iMovie recognises them. I can navigate in Finder to a camera directory called PRIVATE where I can see the movies in a sub-folder, as .MTS files. How do I get them into iPhoto, or failing that, onto my Mac?
If I had chosen to record using AVCHD Lite they would be in H.264 and therefore not a problem, but the 'Quick Record' button which I use records in this other format.
(I'm not about to upgrade my hardware or software BTW, so please don't suggest that.)

You need to use iMovie for these movies, but there's a particular protocol needed for getting MTS >format material from your camera to the app. I have no idea if iMovie 6 supports it or not. Post on >the iMovie forum for more.
I will try - thanks.
iPhoto doesn't support AVCHD Lite which is a proprietary version of the AVCHD format peculiar to >Panasonic. I know that recent versions of iMovie do support this material. I have no idea if iMovie 6 >will, again post on the iMovie forum for more.
I thought H.264 was widely supported by Apple (e.g. on iPods etc)? The MacWorld reviews suggested this wouldn't a problem.
(I'm not about to upgrade my hardware or software BTW, so please don't suggest that.)
Well you may need to be realistic about the chances of software from 2006 supporting formats that >didn't even exist then.
I'm not being stubborn for the sake of it. My computer is a good balance of 2006 hardware and software. I'm not even sure that iLife '09 is compatible with a G5? And even if it was I'd barely use it (iTunes yes, but that's not iLife; Photoshop yes, ditto) so shelling out for it, just for a version of iPhoto isn't an option really. I just want a way to replay my movies outside my camera, is all. H.264 was one of the reasons I bought that camera (I've read about that format for literally years in Mac magazines.)

Imovie 9.0.9 wont import my ipad 2 imovie project. How do I import my project and finish it on my mac?

Similar Messages

Maybe you are looking for