Imovie burn to idvd

i have created photo slideshow (with music) on it in imovie and i want to burn to a dvd in idvd. everytime i share it the idvd software wants to create a theme. can i do this without a theme?

everytime i share it the idvd software wants to create a theme. can i do this without a theme?
If by this you are asking if you can create an "Auto play upon insertion" DVD, then the answer is "Yes." Simply switch to the iDVD "Map" window and drop you slideshow movie to the start "box" as indicated by the instructions.

Similar Messages

Shimmering once iMovie burned using iDVD

Hi - I have created a presentation (both scanned photos and video clips) in iMovie 6 and burned it using iDVD. The presentation looks great on iMovie, but after I've burned it and watched it on my DVD, there seems to be a "shimmering" effect on some of the photos. Originally I thought it was something to do with the way I scanned the photos. But when I attempted burning it subsequent times, a different set of photos seemed to have developed the shimmering effect. For example, on the first DVD, clips #50-75 had shimmering and in the second DVD, it was clips #60-78 (the shimmering seems to be moving along later in the presentation). Any suggestions on what I have to do to avoid this? Many thanks....

Hi - thanks for the suggested reading. I'm prepared to save the clips at a smaller resolution (640x480) but I'm still confused - why does the "shimmering" effect strike different clips at different times when I burn it on iDVD? If an image would be prone to "shimmering" then shouldn't the effect show up each time the project is burned? Conversely, if it burned properly once before, why would it begin to "shimmer" when the project is burned a second time?

Whenever i try sharing my imovie trailer with idvd it says "The project could not be prepared for publishing because an error occurred. (Error in user parameter list)". How am i supposed to burn it to a dvd then?

Whenever i try sharing my imovie trailer with idvd it says "The project could not be prepared for publishing because an error occurred. (Error in user parameter list)". How am i supposed to burn it to a dvd then?

Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
Please advise, alko80

Imovie project when burned thru idvd looks horrible

I have worked for several months on making my first Imovie. It is about 1hr in length. It combines both narration, video, soundtrack and still images. When I previewed the project on imovie looked great. I can also export thru quicktime and it looks good, but not as good as it does in imovie. When I followed the directions on how to export to Idvd, I was unaware of how poorly the finished project looked in Idvd. I burned it and was let down as all my titles where pixelated and the still images are combing real bad. Also some of the images are jerky in the ken burns effect. I find this frustrating as I can save it as a quicktime file and it looks pretty good (but not as good as in imovie). It appears to me that everything I have tried as far as importing to idvd looks horrible when Idvd gets done with it. In fact even the Idvd menu I made looks pixelated and horrible. I am making this dvd to sell to others and to present at talks I am giving. The quality is so poor I am thinking about bagging the whole project. I noticed on the forums regarding both idvd and imovie many of the questions about the quality degredation in idvd dont get answered. Or when they do get answered, the answer is to purchase final cut or more software in general. What I want to know is can I make my excellent looking imovie look acceptable in idvd? If not, why? Why would mac make a option to make a movie project look good in imovie, but the only way to export it is to make it look horrible? Also, is there a way to make a dvd in idvd that looks as good as my Imovie project (without dropping 1,000$ for more software which I am not going to do as now I don't trust it until I see it first)? What am I missing here?

Hi Adam,
Just some general comments about exporting from iMovie '09. From posts on the forum, and from my own experience, it's best not to use Apple's preset export option "Share to iDVD". You may not have used this, but it produces an AIC (Apple Intermediate Codec) movie that doesn't look good when burned through iDVD, for some reason. Odd, considering that iMovie edits in this format. _The option "Share to Media Browser" gives much better results._
You don't mention what format your source footage is (to the best of my recollection). This may have a bearing on the final result (burned DVD). Is it DV or AVCHD or some other format? iMovie '09 has a reputation for producing less than stellar results with DV footage, due to the way it handles interlaced material. AVCHD footage turns out quite well on DVD after editing in iMovie.
If you have not already tried this, export using "Share to Media Browser". In iDVD, from the Media tab, drag your movie into the background area of the iDVD theme, then proceed to set up the DVD as usual. When sharing to the Media Browser, you have a range of sizes to select from. Try Large (960x540) and also HD (1280x720). I've used both but see little difference, if any, in the final DVD. But I do get quite good results with both. The picture is softer and less saturated when compared with the original AVCHD footage viewed via the camcorder on an HD TV. This is to be expected, given one is HD and the other SD, of course. But it shouldn't be as bad as you are describing.
There are many posts about DVD quality on the forum. As you would be aware, some offer very good advice. Try different methods using a short test project to see what gives the best results for you. Look out for an e-book by Steve Mullen - not free, but some good tips there.
Hope this helps in some way. Quality issues can be frustrating!
John
Message was edited by: John Cogdell

Low quality of burned DVD even if I drag&drop iMovie project into iDVD

Hi all,
I've a iMovie HD project that I want to burn via iDVD (7.0.4).
If I click "Share with iDVD" the quality of the resultung video (which is burned to DVD) is rather poor. As I've read within this discussions, the preferred way is to close iMovie and "drag and drop" the iMovie project into iDVD.
With this way, iDVD (instead of iMovie) will render the movie, which should give a video with far more quality.
Unfortunately, the burned DVD with the "drag and drop" method has the same low quality as the video with "Share with iDVD".
I've done a little research and noticed that the "shared movie" for iDVD (iMovie project->Show package Contents->Shared Movies->iDVD) for a 1:10 video has a filesize of only 32kb!
Is there any way to set the "export" parameters for this "shared movie" (it is a quicktime file)?
The quality of the completed DVD is acceptable if I export the iMovie project to "DV stream" an import this stream into iDVD. But in this case I lose all my chapter markers of the movie ..
Is there any way to export the movie from iMovie HD and keep all the chapter markers for iDVD?
Importing the iMovie HD project into iMovie 08/09 is not an option, as I lose the chapter markers also ..
Thanks in advice,
Kind regards.

Hi,
the iMovie project was created as "DV" project and I imported DV PAL clips. The iDVD preferences are also PAL (25fps) and the quality setting is "professional quality".
I've also tried the setting "best performance" within iDVD (as suggested within this forum), but with the same poor result.
I can see within the iDVD "project info" that iDVD will use "mymovie.mov" within the "Shared Movies->iDVD" of the iMovie project (Show package contents).
As this converted movie is of low quality, I think this is the root of evil.
If I export the movie from iMovie with "Export as DV stream" and import this converted movie into iDVD the quality is ok - but I lose the chapter markers ..
Is there any way to keep the chapter markers?
Kind regards.

Change iMovie project while Burning in iDVD?

I use iMovie to import and process football game clips from our games and scout games. I change some clips, add titles, etc., and then ship it to iDVD for making the .img file. This process works really well.
My question is once I start the .img burning process, can I close the source iMovie project and import a new set of clips (game) into a new project without harming the iDVD burn process?
I'm very hesitant to do this as I'm not sure of the relationship between the iMovie project and iDVD when burning the DVD/.img file. I don't want to harm the iDVD processes by going to another project. Yes, I know that I can probably recover quickly, but this is normally a time driven process done in the wee hours the morning after the football games. I don't want to have to recover and start anything over at that time of night.
My suspicion is that they are independent and I can import a second project while burning the first.
Thanks
Casey
IHS Vikings

... I guess I got a bit dramatic there...
that is the question... (besides the actual "what is showtime?" in about 30min???)
I think, this is a typical Karl Petersen question..
my knowledge stops at:
iDVD uses the .imovie file as a reference, to collect all items needed for conversion; the conversion itself is a step-by-step process (menu, audio, video...); if you now change anything WHILE encoding... e.g. change the ref.mov by editing the project, or, better, delete something (a music file)… then?!
that is a vry tricky process, a kind of "collaboration" as programmers would call it...- I'm no programmer, I'm a user: when finished, I quit iM, launch iDVD, tell my Cube "nitynight" and next morning (450MHz here), my .img is ready to burn on my disk....

How do I get a movie from iMovie 10 to iDVD to burn a disc

How do I get a movie from iMovie 10 to iDVD to burn a disc?

To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

Using OS X 10.8.4. Installed iLife 11 to get iDVD. iMovie ready to burn through iDVD. Attempted burn. iDVD says burn is complete. Burn lines are on DVD R. Same disk cannot be read and is considered blank by computer and DVD player. How do I burn properly?

Using OS X 10.8.4. Installed iLife 11 and got iDVD. iMovie ready in iDVD. Attempted burn. iDVD says burn is complete. Burn lines are on DVD+R. Same disk cannot be read and is considered blank by computer and DVD player. How do I burn properly?

Hello TchrDi,
I suggest this article named Archived - iDVD: Troubleshooting issues with burning discs found here http://support.apple.com/kb/ht1583.
It is pretty lengthy, but also pretty thorough.
Cheers,
Sterling

Once iMovie project is burned with iDVD, picture on TV is cut off on both sides.

I made a movie slideshow using iMovie and used iDVD to burn it to disc. The movie plays fine, but when played on a TV, both sides of the picture are cut off. I inerted the disc into a computer and it plays fine there... I guess the problem is just TV format?

The following is just to illustrate Bengt's comment regarding TV-overscan:
Click to view full size
Click to view full size
OT

Audio gets out of sync after export and burn to iDVD - works in iMovie

I've burned my DVD show twice on iMovie and iDVD and the audio music tracks slowly get displaced over the course of the show (15 min) after exporting and burning to iDVD. It gets pushed back so that it starts later each new track...I've locked the audio to the playhead for each new audio track - however, there are some empty gaps between the tracks, does this have anything to do with the displacement? Or should it not matter since the tracks are locked?
I had it all synced up in the playback on iMovie and had it aligned with visuals, however, after burning, it gets displaced and everything gets off...
Any help would be appreciated, thank you
Chris

The problem:
http://www.dvformat.com/htm/features/2000/800/dv_formatfaq.htm
(Scroll down about two thirds to "What's the difference between locked and unlocked audio?" )
The solution:
Always use 16-bit/48kHz audio.
iMovie: Audio and Video Lose Synchronization
http://docs.info.apple.com/article.html?artnum=61636
A few possible solutions here:
http://www.danslagle.com/mac/iMovie/audio/1001.shtml
iMovie: Improving audio and video synchronization
http://docs.info.apple.com/article.html?artnum=42974

HDV imovie projects lose audio sync when burned in idvd

I have 80 min. HDV projects from imovie sent to iDVD, after burning them onto dvd they play fine then lose audio sync after about 60 min. or so.....

Painful in iDvd to do interviews when they happen to fall over the 60 minute mark, isn't it?
If it's of any consolation, it's more reliable in Apple's FCS2 / FCP => DVDSP.
Toast might be another option worth looking at....
Good luck on this.

Best practice for exporting from iMovie '08 to iDVD

I am looking to find out what is the best practice for exporting from iMovie '08 to iDVD. I have read the other postings that give the basic howto (export to Media Browser then select the video in iDVD). However, my question is a little more technical. I have 1080i HD projects. I am interested in burning them to DVD in the best possible quality. What setting should I be using when I publish to Media Browser?
I am wondering about quality loss due to more than one conversion/compression. I suspect that when I export to the Media Browser then this is occurring. If I am not mistaken iMovie is using something like H.264 for this. Then, when I run iDVD I suspect it will it do another conversion/compression, I think to get to MPEG2. Not only could this result in a loss of quality but also it will take extra time. I am interested to know what others think about this.
Finally, I am looking to create DVDs for a lot of video. I am wondering if there are any USB or firewire hardware devices out there that could speed up the compression. I use the Elgato Turbo.264 when I want to encode to H.264 but I wonder if there is something similar for DVD creation.
Thanks in advance.

the standards for videoDVD are 720x480, and usually mpeg2 encoded..
so, your HiDef project HAS to be 'downsampled' somehow..
I would Export with Qucktime/apple intermediate => which is the 'format' your project is allready, and you avoid any useless 'inbetween encoding'..
iDVD will 'swallow' this huge export file - don't mind: iDVD cares for length, not size.
iDVD will then convert into DVD-standards..
you can 'raise' quality, by using projects <60min - this sets iDVD automatically to highest technical possible bitrate
hint: judge pic quality on a DVDplayer + TV.. not on your computer (DVDs are meant for TVdelivery)

Foreign audio after burning in iDVD

I am running iMovie with Tiger on eMacs. I have 13 computers in a classroom. Sometimes when I burn in iDVD, the burn is successful, but there is only identical foreign audio over the whole disk. I have four uses set up on each eMac. the foreign audio if from totally different user than the one I am logged into. This plays on both the theme upon loading the disk, and on every movie. Movies play fine in iMovie and when testing in preview in iDVD. Usually I trash preferences and this clears it up. Now, two of my computers are not fixed with this method. I got one to work after trashing and repairing preferences, rebooting, then rebuilding the iDVD project with a totally new project. Any ideas?
Thanks

Sounds like this old gem...
iDVD: Wrong music after switching users
http://docs.info.apple.com/article.html?artnum=301642
Patrick

Dvd ejects during burning in iDVD

Near the end of burning a iDVD slideshow to the DVD the DVD ejects. What's wrong?

iDVD SlideShow function is limited to 99 photos PER SlideShow. You can have several of then (up to 99 too)
But I rather use another tool
• Video editor as FinalCut as I here have 100% controll
• Not iMovie'08 to 11 as they can not deliver what iDVD needs - interlaced SD-Video - but discard every second line in the picture resulting in a big quality loss.
• iMovie HD6 - delivers
• FotoMagico™ (included in Roxio Toast™ Pro bundle)
And note: That DVD created with any program is just as standard: interlaced SD-Video
Feeding iDVD HD material will not improve the final DVD result but degrades it due to Bad downscaling.
Yours Bengt W

Movie distortion when burned using iDVD 6

Hello,
I am creating a movie with iMovie 6 and when I tried to preview a 'work in progress' version on my TV by burning a DVD using iDVD 6 there is a problem. What happens is whenever there is rapid movement of a subject, eg an arm movement, the subject (arm) becomes distorted and 'lined instead of it's normal solid, smooth shape. There is also a slight reduction in clarity in the picture in general. I have made movies before (albeit with earlier versions of iMovie and iDVD on OS X 10.3.9 iMac) and burned them to DVD without any problem.
Can anyone help please?
Thanks
Dan

I am also having problems with the image quality of the DVDs burned from iDVD. Are there no "experts" or moderators on these forums to respond to this issue
There are several experts here with knowledge about iDVD and creating DVDs, but we find it impossible to respond to general 'rants'. You will find MANY message threads here in which we have helped people who came here with specific problems.
Saying "I am also having problems with the image quality of the DVDs burned from iDVD" tells us NOTHING. What is the source of your video content? How long is the video content in minutes? What format (CODEC) is it in? ... the list can go on.
NTSC DVDs are low resolution devices (less than 640x480 pixels - that's 0.3 megapixels) and may be heavily mpg-2 compressed. They are designed for viewing on TV sets and not full screen on computer monitors.
Are there no "experts" or moderators on these forums to respond to this issue?
... and what did you expect us to say?

Imovie burn to idvd

Similar Messages

Maybe you are looking for