IMovie closes right after it starts to open

I'm not sure if my problem stems from these, but I installed a few system updates today, and now when I click on my iMovie icon it starts to open up and then it just closes. I've gone through and tried removing the com.apple.imovie.plist, and while that brings me to the main iMovie screen, when I either click on new project or open existing project, the progress bar goes to about 75% and then closes again.
What could be the cause of this?
iMac Intel Core2 Duo Mac OS X (10.4.9)

Nevermind - I discovered it was one of my Quicktime components for a somewhat obscure piece of hardware.

Similar Messages

Photoshop CC, Flash CC, After Effects CC, Dreamweaver CC all Closes right after opening????

I have tried everything on the forums, but every time i open Photoshop, Dreamweaver, flash, after effects all with CC paid membership closes right after opening them. I have read the forums searched in the internet, update and downgrade the drivers on graphic card, sign in and out the adobe creative cloud, The one thing i notices is that when i open Photoshop in the notifications on my windows, it appears in the notifications that i register my product on adobe with ID but i have entered my Id with billing information an all when i click to continue it goes sign in then back to the address??. And in my products shows i have membership cloud, don't know what to do anymore! I have even uninstall the program and clean everything with adobe cleaning tool. I don't Know what to do!!!

Have you found a solution, I am having same problem

Premiere CC closes right after opening it.

Everytime i try open Premiere, photoshop or after effects they immediately close out without any warning or explanation. I also have lightroom from the cloud and that works perfectly. There are no error messages all of the programs simply just close right after they open. I have the programs installed onto a different drive as well, not sure if that help out with anything. Help! I bought these programs i'd like to use them to continue working!!!!

See my reply in your other message Lightroom is the only program that will run

Creative Cloud closes right after opening.

Hello.
My creative cloud apps close right after I open them.
For an example I'll take photoshop. I click it, I get the photoshop logo.
After the logo disappears I get the Photoshop screen. But it only remains open for a few seconds, and then closes right after.
No error messages, no warning, it just closes.
It's not just PS, every app I have installed has the same reaction.
I have tried:
The font thing I found on here. - Didn't work
Reinstalling the apps - Didn't work
Reinstalling Creative Cloud - Didn't work
Windows 7
Intel(r) Core(TM) i5-2450m CPU @ 2.50GHz

http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Mylenium

Dreamweaver8 closes right after start

Hello
PC AMD Athlon 64 2200MHz 3700+, XP
Dreamweaver8 closes right after start
Direct after start I get the next two error panels
see the attached gif or go to
http://tinyurl.com/2mj9kt
Does anyone recognise the problem and know a solution or know
what I
should do next?
Problem does not stop after a systemreboot.
Thanks for the attention
Greetings, Lex van de Oudeweetering Netherlands

Lex vd Oudeweetering schreef:
> Hello
>
> PC AMD Athlon 64 2200MHz 3700+, XP
>
> Dreamweaver8 closes right after start
> Direct after start I get the next two error panels
> see the attached gif or go to
>
http://tinyurl.com/2mj9kt
>
> Does anyone recognise the problem and know a solution or
know what I
> should do next?
> Problem does not stop after a systemreboot.
>
>
>
> Thanks for the attention
> Greetings, Lex van de Oudeweetering Netherlands
OK, with the help of telephonic Support, which I could not
find at
first, I solved it. I already guessed it was the Prefs file,
like I had
about a year ago as wel with Photoshop. Could not find such a
file, but
talking with support it turned out to be the complete
Dreamweaver folder
in Documents and Sttings and inside the folder with my name
et.
After renameing the Dreamweaver folder, Dreamweaver started
and created
a new folder.
Jippie! It's working again.
Greetings
lex van de oudeweetering

Web apps close right after they open

I did the upgrade this morning and now when I open any of the apps the I down loaded from the app store they close right after they launch. I've tried several apps and they all close but the original app work fine. I turned the phone off and also did the reboot by holding the off and home button until the apple came back.
Message was edited by: Stretch923

I was under the impression that any apps that you currently had on your iPad would work with the new updated iOS. However, I can't remember why I even think that but I probably read here on this site.
In any event, I believe the overwhelming majority of your apps should still work even if some will not under the new iOS. What I'm saying is that there may be something else going on that will require something additional on your part - perhaps restoring your device to factory settings and then restore to your backup.
iBooks is an Apple App but there are other reasons why the apps could be crashing. You could try closing all of the apps in the recents tray and restart and see if that helps, but you may need to restore your device(s) if nothing else works.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Hi, I just installed my Creative Suite 6 and the programs close right after launching (for about 5 seconds) with no dialog box about an error. I have tried uninstalling and re-installing but still the same thing. Help pls!

Hi, I just installed my Creative Suite 6 and the programs close right after launching (for about 5 seconds) with no dialog box about an error. I have tried uninstalling and re-installing but still the same thing. Help pls!

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Activation - product activated but closes right after

I bought the Creative Suite, and have a valid activation code. When I enter it, it says that it works, however the program closes immediately after. When I open it again, it asks me to activate it, accepts the code, and closes again. It's just an endless cycle. Help? Thanks!

You're going to need to call Adobe, activation and installation issues
are handled free of charge.
Bob

When i try to create an account on my iphone 5, icloud closes right after accepting the general condition. How can i create my account????

When i try to create an account on my iphone 5, icloud closes right after accepting the general condition. How can i create my account????

Reset and try again.
Reset: Press and hold Power and Home button until Apple logo appears. Release and wait to reboot.

ITunes closes right after opening

My iTunes started "performing an illegal operation" right after opening, then closing, a few days ago. I've tried every trick I know, been through every support scenario on their website, and looked at all kinds of forums to try and fix the problem, but nothing's been working. I've found out that the "quicktimeh264.qtx" file is the problem, but I have no idea what to do. I've uninstalled and reinstalled both iTunes and Quicktime, and that didn't help. Any ideas?

Sorry, wrong forum, I'll repost it in the right one.

Final Cut Express HD (3.5) closes right after opening?

Hi,
I believe years ago I had this same issue and it was as simple as deleting the preferences (??).
Basically, what's happening is I just installed FCE HD (3.5) on my G4. I meet the system requirements to run the application AND Soundtrack Pro and LiveType open and run fine. FCE closes immediately after opening and then I get an error: "The Application Final Cut Express Quit Unexpectedly."
Any ideas?
Thanks!

Yeah, sorry for being so confusing. That's exactely what I did. Since my main HD is 500Gb and my secondary drive is 120Gb, I just copied all the necessary files to the 500, formatted the 120, reinstalled OSX, and booted to it. The intention was to let the FCE software think it was installing on a fresh drive (which, it was).
However, even then it won't let me install FCE. Just LT and Soundtrack. ?? I'm a bit confused because the system requirements for Soundtrack and LT are the same for FCE.
I'm trying to install it on a Dual 1.25ghz G4 Quicksilver with 1.5Gb Ram. ??
The funny thing is I WAS able to install the complete program initially when I got it. I had a previous copy of Final Cut Express (1) on my main drive. I ran the FCE HD installer, and the program installed just fine. However, it kept closing right after it would open. I figured it was a preference conflict between the newer version (3.5) and the old version (1.1). So, I've done my best trying to erase all evidence of FCE ever being on the drive and still get nowhere ??
Thanks!

Hi, my photoshop elements 12.0 had been working fine for severeal months on my PC (Win8.1 64-Bit). Since a few days it crashes right after the start. In the Windows event viewer I found following messages:

Name der fehlerhaften Anwendung: PhotoshopElementsOrganizer.exe, Version: 12.0.0.0, Zeitstempel: 0x5314d4d4
Name des fehlerhaften Moduls: MSVCR100.dll, Version: 10.0.30319.1, Zeitstempel: 0x4ba1dbbe
Ausnahmecode: 0xc0000005
Fehleroffset: 0x00002357
ID des fehlerhaften Prozesses: 0x1a30
Startzeit der fehlerhaften Anwendung: 0x01d06594ad77b481
Pfad der fehlerhaften Anwendung: C:\Program Files (x86)\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe
Pfad des fehlerhaften Moduls: C:\Program Files (x86)\Adobe\Elements 12 Organizer\MSVCR100.dll
Berichtskennung: f21b3990-d187-11e4-82f5-448a5b82d1a6
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Any hints how to solve this issue are welcome!

Ah, I was able to delete it that time. You're right, it was just a matter of timing.
Sadly, the problem persists-- after deleting the preferences file, I opened up a picture and tried to add text with the text tool, and Photoshop crashed again.
Edit: Okay, I tried to reset the text tool, but Photoshop crashes before I can reset it (basically, right after I click). I tried resetting all the tools, but that didn't work. I also held shift to start without third-party tools, but there was no change. Pretty sure I don't have any third-party tools installed, unless they were bundled with Photoshop.

Can't open any program of CS6 on windows 7. The windows of the program open and close right after. I allready uninstal et re-instal all de CS6 but it's useless, CS6 still won't start.

Of course, I'm register. I used CCleaner for the uninstalation. I try to start with the "control-Alt-shift" key pressed, also unsuccesfull... The most strange is that before Chistmas hollyday, everythinks was working fine. When I came back, on january, it wasn't.

Allright, I uninstall CS6, clean my computer with "Adobe Cleaner" et re-install.Now It's working !

Photo Gallery shows error message when opening and closes right after it

Hi,
I have Photo Gallery installed on my computer and my photos are in an external hard drive. At the beginning worked well. But today I tried opening Photo Gallery and it shows an error only giving you the option to click "Accept". After you accept
the error, Photo Gallery closes.
The error goes as follows:
"One or more folders included in Photo Gallery is offline and is preventing Photo Gallery from starting.
Either remove offline folders from Photo Gallery using Windows Explorer, or make sure that all folders are inline and try starting Photo Gallery again"
Why did this happen and how can I fix this, I tried repairing and uninstall/reinstall Windows Essentials and it didn't work.
Help please!, thanks!

Hi,
Consider Windows photo gallery is part of Windows Essentials, we have a better forum to seek help for problems related with that:
Windows Essentials
Additional information about Photo Gallery:
Photo Gallery Help Page
Thank you for your understanding.
Best regards
Michael Shao
TechNet Community Support

NI-VISA 5.1.2 exits/closes right after launching it on a Linux CentOS 6.2 PC, also crashes LabVIEW when trying to create VISA ref constant for VISA Open.

After installing LaBVIEW 2011 and NI-VISA 5.1.2 on a CentOS 6.2 PC, I had noticed a problem with trying to use the VISA vi's in LabVIEW, basically it's not working for me, LabVIEW crashed when trying to create a control or constant for the VISA Open vi. Tried to launch the VISA tools, they all start and then close abruptly. NI I/O Trace only shows one line.
I did read though many threads and decided to collect the NI system.log, which is attached. (system.log.gz). I did notice a strange message in here about nivisaserver:
/usr/bin/tail --lines=25 /var/log/messages:
May 22 11:18:48 localhost abrtd: Package 'nivisaserver' isn't signed with proper key
May 22 11:18:48 localhost abrtd: Corrupted or bad dump /var/spool/abrt/ccpp-2012-05-22-11:18:48-3258 (res:2), deleting
Thanks!
Solved!
Go to Solution.
Attachments:
system.log.gz ‏621 KB

MountainMan12 wrote:
After installing LaBVIEW 2011 and NI-VISA 5.1.2 on a CentOS 6.2 PC, I had noticed a problem with trying to use the VISA vi's in LabVIEW, basically it's not working for me, LabVIEW crashed when trying to create a control or constant for the VISA Open vi. Tried to launch the VISA tools, they all start and then close abruptly. NI I/O Trace only shows one line.
I did read though many threads and decided to collect the NI system.log, which is attached. (system.log.gz). I did notice a strange message in here about nivisaserver:
/usr/bin/tail --lines=25 /var/log/messages:
May 22 11:18:48 localhost abrtd: Package 'nivisaserver' isn't signed with proper key
May 22 11:18:48 localhost abrtd: Corrupted or bad dump /var/spool/abrt/ccpp-2012-05-22-11:18:48-3258 (res:2), deleting
Hi MountainMan,
Thanks for attaching the system report log -- I believe I have a solution for you :-) Let's look at a few of the lines:
890: /proc/meminfo:
891: MemTotal: 3894712 kB
1726: /proc/iomem:
1784: 100000000-12dffffff : System RAM
1807: /bin/dmesg:
1820: BIOS-provided physical RAM map: 2576: [nipal] More than 4GB of addressable memory detected.
1838: BIOS-e820: 0000000100000000 - 000000012e000000 (usable)
2576: [nipal] More than 4GB of addressable memory detected.
2577: [nipal] This configuration is not supported. Check the release notes for more information.
Starting at the bottom at lines 2576..2577, dmesg had more than just the NI-VISA server signing notification. At system boot, the NI kernel modules refused to load because they detected more than 4 GB of addressable memory. But, if you look towards the top at lines 890..891, meminfo says you have less than 4 GB of system memory, which makes it seem like the NI modules don't know what they're talking about. However, if you look at the report from iomem a little further down on lines 1726..1784, system RAM has been re-mapped above the 4 GB boundary. While your system doesn't have more than 4 GB of RAM, some of its memory has addresses above 4 GB, which the NI modules cannot use and so they refuse to load. How did that happen? Your system BIOS provided a physical RAM map with usable addresses above the threshold (line 1838).
The fix here is simple -- you need to tell the kernel to reserve addresses above 4 GB [1] so that it won't remap the RAM to higher memory. Once all of the RAM has addresses below the 4 GB threshold, the modules should load and VISA/LabVIEW/et al should stop misbehaving.
It seems to me that LabVIEW is not handling this situation very gracefully, and maybe you can work with Kira to file a bug report.
[1] Re: Successful SUSE linux and DAQmx install; nilsdev and other utilities missing.
http://forums.ni.com/t5/Multifunction-DAQ/Successful-SUSE-linux-and-DAQmx-install-nilsdev-and-other/...
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

IMovie closes right after it starts to open

Similar Messages

Maybe you are looking for