IMovie disappears when Adding the overlap transition?

Hello all
haveing a bit of a problem when adding the Overlap Transition:(:(
So far all the others work fine its just the overlap, any Ideas?
Ive checked for updates but none avalible. next step will be uninstalling the imove and reinstalling it.
Thanks

sounds like you may have corrupted video clips (i know you said pictures but imovie turns the pictures into small video files when you import them) try pulling out the pictures that are giving you this issue. after that close imovie. reopen imovie and reimport the pictures back into the project and try to add the same transition.
I ran into the same issue running a project off a external hard disk. Ended up the 2 pictures i was trying to add the transition between somehow became corrupt. Deleteing them. Closing out imovie and reopening and reimporting the images all over into imovie resolved this issue for me. Hope it works for you as well
Cheers.

Similar Messages

IMovie crashes when adding transitions

I just bought an intel core 2 duo iMac with iMovie HD 6 it has 1GB memory and 189 GB of free space on the hard disk. Everytime I try and add a transition between two photos, specifically the overlap transition, it crashes. The kens burns effect has also stopped functioning correctly (it jumps around). I have tried everything suggested on the discussion boards to correct the issue:
- verified and repaired the hard disk
- cleared caches using OnyX
- shut down iMovie, deleted com.apple.iMovie.plist file, then restarted
- got rid of all third party iMovie and Quicktime plugins
- re-started the project 4 times
- called apple
- also, the movie is not saved on an external hard drive
Nothing has work so far. iMovie still crashes immediately each time I try and add a transition. Any suggestions? Thanks in advance.
iMac Mac OS X (10.4.7)
eMac Mac OS X (10.2.x)

I hope you don't mind my jumping in and adding to the muddied waters, but I am also having trouble with iMovie transitions. I just bought the MacBook Pro - 200 gig hard drive with boosted RAM. I have experienced the following problems:
1. After reading Karl's caution about iMovie trash, I don't empty the trash until the project is completed, so that's not the issue.
2. And this is what's odd . . . I just put one movie together and had not a single glitch. I pulled stills in using Ken Burns, was able to go back and edit the clips, change transitions, etc.
3. I have another movie that I have been working on and it was going fine UNTIL I added the first transition. After that, whenever I select a clip I get a black screen and have to reimport the photo to see it.
4. When I try and add transitions, sometimes they work, sometimes nothing happens, sometimes the system crashes, and sometimes it looks like it is going to render, but the rendering line never progresses.
5. I have tried deleting the plist files for both iMovie and iPhoto, and repairing permissions, but it doesn't work.
6. No security features are turned on.
7. I do have slick transitions, but as I said, they worked fine in the first movie (where trash was never emptied.)
This is making me crazy and is far too time consuming. Karl, any thoughts?
Thanks so much.

IMovie crashes when adding audio clip

I am in the middle of creating a movie, everything has been going very smoothly and then suddenly iMovie started crashing whenever I try to add a sound clip to a slide.
The audio clip does initially appear to be added, but then iMovie hangs and I have to force quit.
Any ideas on why this would suddenly start occuring when everything was working fine up 'til now?

I hope you don't mind my jumping in and adding to the muddied waters, but I am also having trouble with iMovie transitions. I just bought the MacBook Pro - 200 gig hard drive with boosted RAM. I have experienced the following problems:
1. After reading Karl's caution about iMovie trash, I don't empty the trash until the project is completed, so that's not the issue.
2. And this is what's odd . . . I just put one movie together and had not a single glitch. I pulled stills in using Ken Burns, was able to go back and edit the clips, change transitions, etc.
3. I have another movie that I have been working on and it was going fine UNTIL I added the first transition. After that, whenever I select a clip I get a black screen and have to reimport the photo to see it.
4. When I try and add transitions, sometimes they work, sometimes nothing happens, sometimes the system crashes, and sometimes it looks like it is going to render, but the rendering line never progresses.
5. I have tried deleting the plist files for both iMovie and iPhoto, and repairing permissions, but it doesn't work.
6. No security features are turned on.
7. I do have slick transitions, but as I said, they worked fine in the first movie (where trash was never emptied.)
This is making me crazy and is far too time consuming. Karl, any thoughts?
Thanks so much.

Video jumps back of a few frames when adding title or transition in CS6

When adding title or transition in CS6 I get a jump back of a few frames in the main video layer at the in point of the graphics or at the transition ( a film dissolve for instance). If I remove the title or transition the jump goes away. Help Please
Edited by Kevin Monahan
Reason: a better title for search ability

Ask in the Premiere forum or whatever and be a lot more specific. We know nothing about your system, your footage, your settings.
Mylenium

How to Given the Message when Adding the Marketing Documents

Hello Experts,
I have Required only Message for when Adding the Markeing Documents that times
I want give the message for " Please Check the Control Account"
Is IT Possibal in SAP
Dixit Patel

Hello Dixit Patel,
It is possible but that need SDK coding.
Thanks,
Gordon

Not able to see Metadata fields when adding the fields to the rule in UCM

Not able to see Metadata fields when adding the fields to the rule even after creating them in information fields of configuration manager.It is happening for few fields only.We are using 10.1.3 version of UCM.Kindly provide a solution if any.

Dhilipan,
I am trying to setup AES at the current Customer.
You are right on LR_JP to be linked to customs code list instead of ACE and I do achieve that if I were to maintain the Custom code list by maintaining the assignment for EAR in a separate test.
I was infact trying to follow the link: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30c7015e-c191-2d10-71b9-95907dc8edd1?overridelayout=t…
On this document, if you look at page# 14 thru 17, it has the steps I described in my original note with customs code still appearing in the drop down for 'EXCPT' for EAR.
Nevertheless, I wanted to default Type = C50 when the license type for the line on the Customs declaration is 'EXCPT' but if you see the very last screen-shot below, even though the license type configuration has default value as 'C50' it did not get pulled into the line item Documents tab when I tried to pick the category as 'CUII'.
Let me know your thoughts on defaulting the data into Customs declaration for AES filing.
What I want to achieve is the following:
When License type is 'EXCPT', system should default the type as 'C50'
Should put the License type 'EXCPT' into the number field
Should put the actual License# 'ENC' into the Supplement field
Should put the ECCN # '5A002' into the Details field
Thanks,
Prashant.

Imovie crashes when adding transition

I've put together about a 12 minute movie of mostly photos and a couple short (15sec.) videos. Most have Ken Burns effect. I'm using a MacBook w/512mb memory, and about 10g free on the HD. When I try to add a cross-dissolve transition, I get an unknown error message, and if I try to add an overlap transition, imovie shuts down. What are my options to get this working? Thanks!
MacBook Mac OS X (10.4.6)

sounds like you may have corrupted video clips (i know you said pictures but imovie turns the pictures into small video files when you import them) try pulling out the pictures that are giving you this issue. after that close imovie. reopen imovie and reimport the pictures back into the project and try to add the same transition.
I ran into the same issue running a project off a external hard disk. Ended up the 2 pictures i was trying to add the transition between somehow became corrupt. Deleteing them. Closing out imovie and reopening and reimporting the images all over into imovie resolved this issue for me. Hope it works for you as well
Cheers.

Manually Added Adhoc Approvers disappears when change the Schopping Cart

Hi All,
We are facing a problem in the Shopping Cart , whenever we are login in to the change mode of check status the manually added approver get disappears.Any point on this will be highly appreciated.
Regards,
Mahesh Mohan D

Hi,
We are manually adding the users , the system is not determining the approvers for some of the cost centers this is basically for giving the option for user to select his/her approver . Here we are manually adding the two levels of approvers .
For the manual approval case we are using Adhoc-Approval workflow.
We have a scenario for a particular account assignment category, the approvers are not determined through the n-step approval badi but are added manually in the approval preview.
In the case when requisitioner changes any data in the shopping cart which is in awaiting approval or which is rejected by any approver and present in requesitioner inbox, the manually added approvers are disappeared and no approvers are displayed in the approval preview and when the workflow is retriggered with no approvers.
Is there anyway we can store the manually added approvers in the case when the requisitioner changes the cart.
Thanks And Regards
Mahesh Mohan D
Edited by: Maheshmohan D on Nov 18, 2008 9:44 AM

Components disappeared after adding the image in.....

Hello everyone,
I add a image in my home page that is in swing .As soon as I add that image the components in another page disappeared.(Componenets like textField ,Label).But when I click on that page, those pages appears. I want to appear all those pages at the first time as they are working before adding the image .
Please tell me the solution on my ID or provide the solution over here.
Thanks
Vivek Kumar Gupta

wht do u mean by pages.. ??
and I should suggest you to use..
validate();
after adding images..

User Menu Image disappear when update the system menu

Hi all,
We created an user menu after the system menu Sales A/R, with an image as an icon.
And also we changed some of the system menu description.
But the problem is when you change some information from the Admistration menu, the system menu is updated and all the changes we made in the systems menu description and the image of our user menu, disappear.
The system menu description return to the oficial description and our image isn't showed after the system menu update.
Thanks,
Fran.

Dear Francislaine,
There is a very good example which might be helpful in this context; given by SAP which is installed while installing SDK. The sample project is stored in the followng default folder :
C:\Program Files\SAP\SAP Business One SDK\Samples\COM UI DI\VB.NET\UIDIBasicApp
In th above sample project the basic need for adding images to the menu has been addressed.
PS: Would it be possible to change the system menu description before adding the image to the custom menu?
Regards
Arshdeep

IMovie quits when adding titles

iMovie (9.0.8) quits when adding titles (and sometimes just randomly although it seems to be related to adding titles).
I have repaired permissions and deleted com.apple.iMovieApp.plist from library to no avail.
It is not related to a corrupt project as it happens to all my current projects.
This is the first part of the crash report:
Process:         iMovie [16194]
Path:            /Applications/iMovie.app/Contents/MacOS/iMovie
Identifier:      com.apple.iMovieApp
Version:         9.0.8 (1778)
Build Info:      iMovieApp-1778000000000000~1
Code Type:       X86 (Native)
Parent Process: launchd [148]
User ID:         501
Date/Time:       2012-10-21 10:49:22.738 +0800
OS Version:      Mac OS X 10.8.2 (12C60)
Report Version: 10
Interval Since Last Report:          316922 sec
Crashes Since Last Report:           21480
Per-App Interval Since Last Report: 216105 sec
Per-App Crashes Since Last Report:   7
Anonymous UUID:                      41763BF4-5BD1-26E5-4614-F60738A1FE56
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x000000000000025d
VM Regions Near 0x25d:
--> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL /Applications/iMovie.app/Contents/MacOS/iMovie
    VM_ALLOCATE            0000000000001000-00000000000e2000 [ 900K] ---/--- SM=NUL

Hi
I doubt - BUG - I guess corrupted iMovie pref file (to get this You only need to Force/Panic Halt the program and errors are entered in it)
See if this helps
When iMovie doesn't work as intended this can be due to a lot of reasons
• iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
• Creating a new User-Account and log into this - forces iMovie to create all pref. files new and error free
• Event or Project got corrupted - try to make a copy and repair
• a codec is used that doesn't work
• problem in iMovie Cache folder - trash Cache.mov and Cache.plist
• version miss match of QuickTime Player / iMovie / iDVD
• preferences are wrong - Repair Preferences
• other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
• External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
• USB-flash-memories do not work
• Net-work connected hard disks - do not work
• iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie.
This You do by
_ close iPhoto
_ on start up of iPhoto - Keep {cmd and alt-keys down}
_ now select all five options presented
_ WAIT a long long time
• free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
• external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
• GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
• Screen must be set to million-colors
• Third-party plug-ins doesn't work OK
• Run "Cache Out X", clear out all caches and restarts the Mac
• Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
• Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
• In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

Table number xrefs disappear when roundtripping the XML doc back to FM

I'm using FM 7.2p158 running on Windows XP on a Dell Optiplex GX520 with 1GB RAM. I've converted my legacy FM docs to structured FM, but my (CALS-formatted) table number xrefs disappear when I roundtrip the XML docs back to FM. How can I remedy this?
Initially, I used my own conventions to name the table part elements as I have about 10-15 specific table types and I used those Table Tag names as table elements names (Invisible2, Invisible4, StepTable, ...), so I had 10-15 elements that were true "is fm table element" types in the EDD, DTD, and R/W rules. The table number xrefs worked as they should after roundtripping FM-XML-FM and the tables' shading, ruling, and Table Tags were correct.
I consulted our XSLT developer for proper browser display of the XML files, and he suggested that I should use the CALS table model. I studied the Struct Dev Gd, then I searched this forum for postings on CALS tables and related topics and used suggestions offered by many of you good folks to create an EDD, DTD, and R/W rules to that end.
I've run some tests using many iterations of my files (both CALS and non-CALS types) to roundtrip the FM files, but I cannot get the xrefs of the table number from the CALS-version table title element to display when I roundtrip the XML doc and open it in FM. I get this:
-- In the XML doc text opened in FM, instead of "Table 1-1" for the xref, it leaves a blank space (although the source numbered table title is there).
-- In the Structure View of the same XML doc, I see the following:
- The CROSSREF element text says WHITESPACE.
- Both the CROSSREF element and its source element continue to have the (matching) "Idref" and "Id" number displayed in this view.
- The Idref attribute is disconnected from the CROSSREF element.
- The "table" element is disconnected from its container element (TableAnchor).
Once I apply the File/Import/Element Definitions command in the XML doc in FM, the XML becomes valid and both the CROSSREF Idref attribute and the table element are reconnected, but my xref of the table number is still WHITESPACE.
The XML-converted doc source text reads:
If you're using WebDrive, you will want to use the options shown
in [CROSSREF Idref = "BEHJCAJB" format = "Table Number"/] on the [IndexEntry
type = "Index" text = "WebDrive options"/]WebDrive control panel.[/Para]
[TableAnchor]
[table tabstyle = "Expressroom2" cols = "2"
colwidths = "2.198in 3.500in" colsep = "1" rowsep = "1"
frame = "all"]
[title Id = "BEHJCAJB"][?FM MARKER [Cross-Ref] 86302: TableTitle: Table 1-1
WebDrive control panel options?]WebDrive login values[/title]
[tgroup cols = "2" colsep = "1" rowsep = "1"]
[colspec colnum = "1" colname = "1" colwidth = "2.198in"]
[/colspec][colspec colnum = "2" colname = "2" colwidth = "3.500in"]
[/colspec][thead]
[row rowsep = "1"]
[entry colname = "1"][CellHeading]Field[/CellHeading][/entry]
[entry colname = "2"][CellHeading]Value[/CellHeading][/entry]
[/row]
[/thead]
But when I open the same XML-converted doc back in FM, I get the following:
"If you're using WebDrive, you will want to use the options shown in on the WebDrive control panel."
The CROSSREF Idref "BEHJCAJB" is [WHITESPACE] in the Structure View, so it's a blank space within the actual text in FM.
I have excerpts from my EDD, DTD, and R/W rules that I can post, but would make this even more lengthy. (Sorry about the current length.) What do I need to change to make the xrefs work when I roundtrip the files?
[I don't know whether it makes any difference or not, but I have changed the element names since I originally used a conversion table (to structure my legacy FM files); however, I persisted those element name changes throughout the EDD, DTD, and R/W rules files.]

I'm using FM 7.2p158 running on Windows XP on a Dell Optiplex GX520 with 1GB RAM. I've converted my legacy FM docs to structured FM, but my (CALS-formatted) table number xrefs disappear when I roundtrip the XML docs back to FM. How can I remedy this?
Initially, I used my own conventions to name the table part elements as I have about 10-15 specific table types and I used those Table Tag names as table elements names (Invisible2, Invisible4, StepTable, ...), so I had 10-15 elements that were true "is fm table element" types in the EDD, DTD, and R/W rules. The table number xrefs worked as they should after roundtripping FM-XML-FM and the tables' shading, ruling, and Table Tags were correct.
I consulted our XSLT developer for proper browser display of the XML files, and he suggested that I should use the CALS table model. I studied the Struct Dev Gd, then I searched this forum for postings on CALS tables and related topics and used suggestions offered by many of you good folks to create an EDD, DTD, and R/W rules to that end.
I've run some tests using many iterations of my files (both CALS and non-CALS types) to roundtrip the FM files, but I cannot get the xrefs of the table number from the CALS-version table title element to display when I roundtrip the XML doc and open it in FM. I get this:
-- In the XML doc text opened in FM, instead of "Table 1-1" for the xref, it leaves a blank space (although the source numbered table title is there).
-- In the Structure View of the same XML doc, I see the following:
- The CROSSREF element text says WHITESPACE.
- Both the CROSSREF element and its source element continue to have the (matching) "Idref" and "Id" number displayed in this view.
- The Idref attribute is disconnected from the CROSSREF element.
- The "table" element is disconnected from its container element (TableAnchor).
Once I apply the File/Import/Element Definitions command in the XML doc in FM, the XML becomes valid and both the CROSSREF Idref attribute and the table element are reconnected, but my xref of the table number is still WHITESPACE.
The XML-converted doc source text reads:
If you're using WebDrive, you will want to use the options shown
in [CROSSREF Idref = "BEHJCAJB" format = "Table Number"/] on the [IndexEntry
type = "Index" text = "WebDrive options"/]WebDrive control panel.[/Para]
[TableAnchor]
[table tabstyle = "Expressroom2" cols = "2"
colwidths = "2.198in 3.500in" colsep = "1" rowsep = "1"
frame = "all"]
[title Id = "BEHJCAJB"][?FM MARKER [Cross-Ref] 86302: TableTitle: Table 1-1
WebDrive control panel options?]WebDrive login values[/title]
[tgroup cols = "2" colsep = "1" rowsep = "1"]
[colspec colnum = "1" colname = "1" colwidth = "2.198in"]
[/colspec][colspec colnum = "2" colname = "2" colwidth = "3.500in"]
[/colspec][thead]
[row rowsep = "1"]
[entry colname = "1"][CellHeading]Field[/CellHeading][/entry]
[entry colname = "2"][CellHeading]Value[/CellHeading][/entry]
[/row]
[/thead]
But when I open the same XML-converted doc back in FM, I get the following:
"If you're using WebDrive, you will want to use the options shown in on the WebDrive control panel."
The CROSSREF Idref "BEHJCAJB" is [WHITESPACE] in the Structure View, so it's a blank space within the actual text in FM.
I have excerpts from my EDD, DTD, and R/W rules that I can post, but would make this even more lengthy. (Sorry about the current length.) What do I need to change to make the xrefs work when I roundtrip the files?
[I don't know whether it makes any difference or not, but I have changed the element names since I originally used a conversion table (to structure my legacy FM files); however, I persisted those element name changes throughout the EDD, DTD, and R/W rules files.]

CS4 + CS5 Brush CURSOR outline disappear when increase the brush size

Hi
In Photoshop CS4 and CS5, the outline of the brush cursor starts to disappear when you increase the brush size.
It's OK under 65px in diameter and it's start to disappear over 66px. In 438px the outline is a single dot and over 439px the cursor outline is completely gone!
I read that it's caused by the old drivers for the video card. I'm using GeForce 8800GT and I updated the driver with the latest version form the nVidia web site. The problem is still here!
HELP?

I'm seeing a bit of a pattern of multiple people reporting problems with nVidia 8800 cards. I'm thinking nVidia isn't testing new drivers against this particular model very intensively. See my comments on video cards and drivers in this thread:
http://forums.adobe.com/thread/682582
-Noel

Image Disappears when Adding Adjustments in Aperture 3

I am experiencing odd behavior when using the adjustment tools in Aperture 3. I tried to crop an image and instead of staying on screen for me to finish the adjustment, the image disappeared. I was able to save it by undoing. I created a version of the image and I could crop that OK. I have Add New Version when Making Adjustments checked but it does not seem to be working.

I've had a similar "disappearing" image problem when trying to apply the retouch tool. I don't have the "create version when applying adjustments" preference checked though. Hopefully these issues are additional 3.0 bugs that will get fixed in 3.0.1. Be sure to report the issue to Apple using the "Aperture > Provide Aperture Feedback" menu item.

I have downloaded a movie with subtitle to iMovie. When playing the video, the subtitle does not show up through the entire video. It happens to my Mac Air and Mac Pro.

I have downloaded a video with subtitle. When playing the edited video, the subtitle does not show up in the entire video. The subtitle comes and goes in the video.I have tried with my Mac Pro and Mac Air, with the same result. I have downloaded movie with subtitle before and never had this problem. Please advise.

I'm not very knowledgable on this but subtitles are sometimes on a separate track from the main movie. Try opening the downloaded video in Quicktime Player and saving it - you may be asked if you want to "flatten movie". Choose to do this. The resulting movie will probably now work OK. Others may be able to supply more comprehensive instructions.
Geoff.

IMovie disappears when Adding the overlap transition?

Similar Messages

Maybe you are looking for