Imovie download to camera

I completed editing some footage in Imovie and wanted to download to my camera. the download commenced for about 30 seconds then stopped. I had a message panel come up stating that my connection had been disconnected. the connection was not disconnected.
How do I rectify this difficulty.
Thanks.
Jim
EMac Mac OS X (10.3.9)

The workaround:
Share your movie to QuickTime Full Stream. Open up a new iMovie and import the newly made QT movie into it. Export to camcorder without problem.
:)Sue

Similar Messages

IMovie cant find camera Sony DCR-TRV33E

I have Sony DCR-TRV33E Camcorder and MacOSX Tiger. is it really so that it is not possible to use the camera with iMovie? I cant find this type from the supported list http://www.apple.com/macosx/upgrade/camcorders.html there are tens of other DCR-TRVs. The problem is that the iMovie 5.02 cant find the camera, (the “camera is not connected” was the report from the program) I have also tried to reset the camera but it does not help. And yes Iam using iLink/FireWire cabel. Previously I was using it with Mac os9. The camera is only about 2 years old. Should I use MacOs 9 for this and if yes is the new iMovie working with MacOs9?
If there is drivers etc… to resolve this problem could you please tell me where to download them.
All the best
Tapio Onnela

Hi Tapio
Please try Your Camera on another Mac - to see that the A/D chip is OK
in the Camera. If defect then it behaves just as You describe:
- camera connected
- camera windig forward and backward
- no picture
See if my list can help:
Capture/Import problems:
a) File-Vault is on - turn it off
b) don’t Daisy chain camcorder - external hard disk - Mac
c) Slow hard disk (fragmented: repair permissions, repair hard disk, use a faster hard disk)
d) Something is occupying the CPU/System, like other programs, Internet etc.
e) Bad RAM-chips
f) drop outs on the miniDV-tape - make a camera to camera copy on a tape which You have previous recorded with a time code (dummy recording).
g) FW-wire cable OK?
h) Break in the time-code on the miniDV tape (make a camera to camera copy on a tape which is prerecorded with nothing/anything so that the tape has a time-code from beginning to the end)
i) defective camera TRY IT ON ANOTHER MAC !
j) remove bookmarks in iMovie project
k) Do You have desktop pictures or screen-savers active? Try turning them off.
l) Updating - OS has to be a clean install - not an update eg from X.3.x to X.4.x (no good)
OS X.4.0-2 needs a clean install to work (I use X.3.9)
m) Updating QT and/or other updates (to 7 needs v6 to be cleaned out first)
QT v.7 needs a clean install to work (I use 6.5.2)
n)
Have you tried the crazy fix:
Open GarageBand, play a few notes, close it and reopen iMovie. The camera should import fine now.
Sue/SDillini
o) Trash: com.apple.iMovie.plist and com.apple.iMovie3.plist : files (Xinram)
Yours Bengt W

I have files that have been on my computer for over a year and all of a sudden they wont open and an error message comes up saying they were improperly downloaded or came in an email attach which is not the case

I have files that have been on my computer for over a year and I have used them several times and all of a sudden they wont open. I received an error message saying they are improperly downloaded or came as an email attachement which is not the case. Please advise

They seem to be word files - they will open if I choose "open with" microsoft word, but if I double click they don't open they are appearing as PDF on my screen. I even opened one and then tried to "save as" making sure I chose .doc and they still appear as PDF
I just created a new document response.doc in word and when I saved to my desktop it appears as a PDF file and I absolutely did not create a PDF or save as PDF it was a simple word
doc.
The message says "Adobe reader could not open response.doc because it is either not a supported file type or because the file has been damaged (for example attached in an email and not properly decoded)
The reader version is I believe the most current, I always update when prompted. OS is Windows 8

I have Photoshop CS5 and am trying to download the Camera Raw plug in which will enable me to look at RAW images from a Nikon D800 . The download appears in my " Downloads " folder but when I try to open a RAW image I get a message up which says it can't

I have Photoshop CS5 and am trying to download the Camera Raw Plug in that will allow me to open images taken with a D800 camera .
It appears the download has been successful when I look in my " Downloads " Folder but I still get a message up saying the installed version of Camera RAW won't support the Camera model ( i.e. D800 ) . What am I missing ??
Tony Fletcher

You need to download and install Camera Raw 6.7.1 for CS5. Once you have downloaded it, you need to install it while CS5 is closed.
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Once downloaded, unzip/unpack the file, and run the executable to start the update, following the instructions.

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder.

Bridge will do the job. View > Sort > ByType. Then you can choose a group of one type and put the files in a separate folder.

I downloaded acdsee camera flash (us$0.99) in Hong Kong's app store, but i cannot find it in the app store after i changed to another iphone. it seems that the app is no longer available in HK, how can I get back the app?

i downloaded acdsee camera flash (us$0.99) in Hong Kong's app store, but i cannot find it in the app store after i changed to another iphone. it seems that the app is no longer available in HK, how can I get back the app?

First make sure you are searching the name correctly.
If the app is no longer in the App Store it is no longer available for download. This happens when Apple has found the app violates the agreement with the developer or when the developer no longer wants the app listed in the App Store.
If the app is truly no longer in the App Store your only option is to copy it from iTunes on the computer you normall sync with.

I have Photoshop CS3 Extended and use it on my Windows PC Having bought a Nikon D5200 I have been unable to use the camera on the raw settin g with Photoshop.I have downloaded the Camera Raw 8bi dowload as advised but my computer Windows 7 will not recogn

I am having difficulty opening raw images with my version of photoshop CS3 extended. I have a Nikon D5200 which according to adobe it is supported but when I try to download a camera raw patch 8bi it wont recognise the file format.Can anyone offer a solution which will enable me to use photoshop with my D5200 when shooting in raw? I have windows 7 operating system.

Thank you for your help I have already downloaded ACR 8.7 and tried to download DNG converter will have to back track on this as didnt recognise the file when I downloaded it. is the problem now that I need to change my files to DNG from NEF files before opening in photoshop?
Please be patient as I seem to have got the jist of the problem but not sure the converter is on my computer what should I be looking for?

Error Message -may need to download Photoshop camera raw plug in version 7.3 for full compatibility

I have been working in Lightroom 4.3 for MAC. From there I open 2 files to edit in Photoshop as layers so I can add a layer mask to the bottom layer and use the paint brush tool to make certain areas of the image darker or lighter. I have been doing this with no problem and now it doesn't seem to work. I can see the brushes' strokes on the layer mask but can not see the results on the image.
I keep getting a message from Lightroom saying I may need to download Photoshop camera raw plug in version 7.3 for full compatibility whener I try to edit on Photohsop thru Lightroom, but I have already added this plug in and it asks for it. It happens with raw, jpegs and tiffs from my 1D Mark II or my 5D Mark III and with other people's camera. It used to work fine. Now it dosen't I feel like it is something so simple. Please help. This si crucial to my business.

The wording of the message about ACR 7.3 is a bit misleading: What it means is that ACR 7.3 is required for Photoshop. Lr 4.3 has got it.
Which version of Photoshop are you using?
I suspect it's not CS6 but a prior version. If it is a version prior to CS6 you cannot install ACR (Adobe Camera Raw) 7.3.
You may have downloaded it but you cannot install it. It doesn't install.
On the other hand Lr 4.3 is based on ACR 7.3. So you have an incompatibility of ACR versions: 7.3 in Lr 4.3 and an earlier-version-ACR in Photoshop.
With this situation Lr an dPhotoshop are not fully compatible, i.e. you cannot open images as layers. You can only open one image at a time, either by letting Lr 4.3 render the PSD (or TIFF) and sending it to Photoshop (by selecting <Render using Lightroom>), or you let Photoshop open the Raw file with its earlier version ACR (by selecting <Open Anyway>).
In this situation you have two choices: Either upgrade to CS6, or open images in Photoshop one at a time and vonvert to layers in Photoshop.

I have downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the Sony a6000 camera. However it is not opening the images in camera raw. What can I do?

I have downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the Sony a6000 camera. However it is not opening the images in camera raw. What can I do?

Close and restart Photoshop if you have not already done so.
In Photoshop, go to the Help - About Plug-in... menu then choose Camera Raw. What version does it say there?
-Noel

How do I download my Camera to the ipad and then to iphoto on my G5?

Lets say that I'm on vacation and the memory card on my camera is full.
How do I download my camera to the ipad2?
And then when I get home how do I transfer those same photos to iphoto on my G5 running Leopard?
Thanks!

Thanks,
And I just read this on the camera adaptor link in the apple store, which answers part 2 of my question.:
With the iPad Camera Connection Kit, it's incredibly easy to download photos and videos from your digital camera to your iPad so you can view them on the gorgeous iPad display and share them with family and friends.
The kit includes two connectors, each with a different interface:
The Camera Connector features a USB interface. Just plug it into the dock connector port on your iPad, then attach your digital camera or iPhone using a USB cable (not included). iPhone 3G is not supported.
Use the SD Card Reader to import photos and videos directly from your camera's SD card. Connect it to your iPad, then insert your digital camera's SD card into the slot.
After you make the connection, your iPad automatically opens the Photos app, which lets you choose which photos and videos to import, then organizes them into albums. When you sync iPad to your PC or Mac, the photos and videos on your iPad are added to your computer's photo library.
iPad and the Camera Connection Kit support standard photo formats, including JPEG and RAW, along with SD and HD video formats, including H.264 and MPEG-4.

HT201210 trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know

trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know why?

The servers are overloaded. There are a hundred million people all trying to download iOS 7 at one time. Try again later

How Do I Watch iMovie 08 Through Camera Onto Normal TV

How do I watch iMovie 08 through camera onto normal tv? On iMovie HD it was in the iMovie preferences, all you had to do was check watch through camera, now there is nothing. I can't imagine that they would have taking this awesome feature away. Can anybody help?
Thanks,
Apple Guy 08

Previously this feature involved exporting either DV or HDV to a single destination (mini DV), I suppose introducing AVCHD as an additional destination file type and a multitude of destination media formats (miniDV, HDD, memory stick and DVD) has not only brought about complex issues but introduced unresolved licensing issues.

PSE 12: error code u44m1p7 downloading the camera raw 6.7 update [was:Walt]

I just purchased pse 12 and I get a error code u44m1p7 when trying to download the camera raw 6.7 update
Walt

http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

Can't kill iMovie download - help!

Very strange situation. I seem to have 2 distinct iMovie downloads in progress and they resist all attempts to kill them. Launchpad shows alternating progress below the iMovie icon for the 2 download processes (they are at different stages of the download). In Launchpad, I'm able to use the ALT button (windows-style keyboard) to display the "jiggling icons" with X for cancel, and then click the X for iMovie. I'm prompted to see if I want to delete app "iMovie", and agree, then nothing happens. Maybe because it's not yet actually installed. Nowhere can I find a way to interrupt and cancel these downloads. They've survived shutdowns, exiting the App store, etc., and still they remain in progress. They're actually making progress, so maybe worst case I wait until they're done and then remove iMovie. I opened a shell and looked for the offending process, but nothing obvious. I'm doing all this in an acct with admin authority. It boggles my mind that one can't interrupt a download! Anybody have any ideas? Thanks in advance....

I'd disconnect from the Internet until you figure it out.
No idea myself, but maybe you can find the files with...
Find Any File...
http://apps.tempel.org/FindAnyFile/
Hold Option or alt key when selecting Find to Find All.
Search for Date Modified: Last 5 minutes or whatever, then sort on size maybe?

IMovie exporting to camera

I am trying to export a movie back to my camera, the video exports fine but the audio does not follow. However if I playback the camera through the Imovie the audio is there. I assume there is some encoding that only Imovie can playback, how can I change these settings to have both audio and video play on my camera.

Unfortunately, the deafening silence you hear suggests no one has an easy answer, Larry.
Assuming the iMovie project is set to play its audio, both the audio and video should export to the camera without a problem.
On the other hand, If the audio is turned off in the checkbox at the right end of the Timeline, it won't be exported. But if your audio plays in iMovie that's probably not the problem.
However if I playback the camera through the Imovie the audio is there.
Are you saying that if you play the EXPORTED video back from the camera through iMovie the audio is there? If so, everything on the camera is fine.
I'd check the basics. Make sure the audio isn't muted in whatever method you use to test playback from the camera.
Perhaps the iMovie Preferences > Playback > "Play DV project video through to DV camera" is turned ON? When ON, that mutes iMovie's audio when playing the project. iMovie assumes the camera is connected to a TV providing the audio.
Welcome to the forum!
Karl

Imovie download to camera

Similar Messages

Maybe you are looking for