IMovie editing slow while MBP connected to Plasma Screen

Am newbie to MBP and iMovie
I am using the MBP connected to the 42 inch Plasma screen. I am getting frequent and prolonged spinning ball while editing in iMovie.
The raw DV footage is stored on Glyph EHD connected to MBP by FireWire 800 cable.
Is the slow functionality and frequent appearance of spinning ball due to connection to Plasma screen ? Is it because the MBP is slowly accumulating more and more footage while building the movie project in iMovie on the MBP hard drive ?
There should be no accumulation of DV files on the MBP hard drive until which time as I decide to burn the movie. Yes, No ?
What sort of interface or accelorator is available for install between MBP and Plasma to overcome this problem since this is a great way to edit.
Thanks

That's not good. Were you barefoot and on a concrete floor? Or touching something else with the hand that wasn't touching the Mac?
It sounds like there could be mis-wiring in the walls...like a crisscross of neutral and ground. You might invest in one of those inexpensive house wiring detectors that they sell at hardware stores and see if it shows a fault when plugged into the same outlet where the TV plugs in.

Similar Messages

  • IMovie 11 slow and stuttering using Motion 5 clips

    Hi,
    I'm using an 'old' 2008 Macbook Pro with 6GB Ram and a 2.5 Core 2 Duo.  Until now, everything has always worked with iMovie 11.
    But now I'm trying something new:  I've retimed some .mov clips using Motion 5 --had no problem doing that-- and I 'shared' (rendered?) them using the default settings.  The files are larger than the original .mov files from the camera (original around 200MB,  retimed file around 700MB).  I put the files in the iMovie Events folder, started up iMovie and I can see and use the retimed clips just fine. 
    However, for the first time, iMovie is really struggling very hard, the clips are stuttering and sometimes I have to wait for 2 or 3 seconds before playback continues (in the preview window, while editing in iMovie).
    I've closed all unnessary applications and services, and all looks great in Activity Monitor, but still, iMovie editing is virtually impossible.
    My question is :  will I be able to render the final movie without the stuttering, even though it's stuttering in the preview window?
    Can I do something to get it faster while editing in iMovie?  Or did I do something wrong with rendering in Motion 5?
    Or do I just need new hardware?
    Many thanks,
    Kris

    hi,
    if you are slow moing the footage then you could expect the resultant files to be bigger, since the clips are longer. However if they don't play well in iMovie, it could be that you have rendered them out with a codec that your computer cannot handle. Motion gives you a whole heap of codecs to render out to, and its even easier if you have Compressor. Have a look at one of the clips that you know does play nicely in iMovie. Open it in Quicktime player and then get the info window open about it. There it will tell you what kind of compression it has been rendered in, what the pixel dimensions are etc etc. You will want to try and copy those settings with your new clips out of Motion.
    hth
    adam

  • Upgrade 10 Mbps connection to 100 Mbps

    I replaced my old PC (pentium 4) with a new PC (quad core) in my network (Xbox360 (wired), Wii (wireless), Laptop (wireless) and this PC (wired) on a WRTP54G Voip Router). With my old PC I had no problems, but now I get the message network cable not connected on my new PC. The solution is to reduce my speed from the 1GB Nvidia LAN to 10Mbps full duplex instead of automatic (100 Mbps didn't work). Now it connects to my router, network and internet with 10 Mbps, but this connection is too slow for my network. When I connect my laptop directly with the PC I will get a 100 Mbps connection. And when I connect my Laptop to the router with the same cable as the PC, I also get a 100 Mbps connection.
    Can someone explain the difference between half duplex and full duplex speed?
    Is there a solution to get the connection to 100 Mbps?
    Message Edited by 2J on 07-07-2008 06:03 AM

    Full Duplex = your NIC can send and receive data at the same time. A telephone is an example of full duplex, both parties can talk/here at the same time.
    Half Duplex = your NIC will either send or receive data but will not do both at the same time. A walkie talkie is an example of Half-Duplex, only one person can transmit at a time.
    Sorry I do not deal with the gaming part at all, so I do not have a solution, however if I come across an answer I will certainly post it.
    Good Luck,
    Ttech 

  • Codec for QT play on Mac AND PC-- + IMovie edit? (DVD rip using MPEG STRCLP

    Based on the helpful advice of this forum, I am ripping a bunch of DVD's of home movies into a large number of discrete .mov files that I can (1) import into IMOVIE for editing and (2) view directly and effortlessly using QT on both a Mac AND a PC (I want to send these files to others). Maintaining image quality is very important given the less than perfect MPEG 2 source material.
    I am following the suggested process using MPEG STREAMCLIP, including trimming and light cutting of unwanted sections before creation of each file.
    *My question is what is the best export process and settings for my situation?*. Given the less than ideal quality of the MPEG-2 source, I would like to avoid further degradation if possible. Choices:
    1. EXPORT to .mov using *AIC codec* -- clearly the best choice for IMOVIE editing and QT playback on a MAC -- but unable to playback using QT on a PC without buying/loading the AIC software. This is a problem since I want the ability to give the .mov files to others and allow them play on a PC without instructions or the hassle of a software download.
    2. EXPORT to .mov with *another Codec -- but which CODEC?* --which codec allows effortless playback with QT/ MAC and PC while retaining original MPEG-2 quality -- and allows for later editing in IMOVIE?
    3. *SAVE AS .mov* -- my understanding is that this copies the original MPEG-2 (after trimming and cuts) and eliminates transcoding. Is this accurate? If so, will it play effortlessly on a MAC and PC? Am I sacrificing anything when importing into IMOVIE (other than the need to transcode from MPEG-2 into AIC)
    Thanks in advance for the help. I continue to be amazed at the complexity of choices for such a simple process.
    Ken

    Martin, I Exported my rip using MPEGstreamclip DV/DVCPRO-NTSC full quality, then exported QT Movie out of FC after editing a bit. Put it back to DVD using DVDSP and used Compressor due to tutorials I watched from Larry Jordon, saying I would get a better quality compression using compressor. I know you are probably scratching your head at this point saying, wait, FCE doesn't come with Compressor or DVDSP. At this time I'll have to admit, I have FCstudio but started out with Express and like the FCE forum better then the FC forum.
    The setting in compressor I used are:
    Name: MPEG-2 6.2Mbps 2-pass
    Description: Fits up to 90 minutes of video with Dolby Digital audio at 192 Kbps or 60 minutes with AIFF audio on a DVD-5
    File Extension: m2v
    Estimated file size: 2.72 GB/hour of source
    Type: MPEG-2 video elementary stream
    Usage:SD DVD
    Video Encoder
    Format: M2V
    Width and Height: Automatic
    Pixel aspect ratio: Default
    Crop: None
    Padding: None
    Frame rate: (100% of source)
    Frame Controls: Automatically selected: Off
    Start timecode from source
    Aspect ratio: Automatic
    Selected 16:9
    Field dominance: Automatic
    Average data rate: 6.2 (Mbps)
    2 Pass VBR enabled
    Maximum data rate: 7.7 (Mbps)
    High quality
    Best motion estimation
    Closed GOP Size: 1/2 second, Structure: IBBP
    DVD Studio Pro meta-data enabled

  • How to connect a plasma panel digitally to Qosmio F10-130

    Hi,
    I just orderer the F10-130 and I would like to connect my plasma panel with a digital video signal. The monitor has a DVI input, and the F10 has a so-called "D-Video out" interface that I've never seen before. What's the best way to connect the two devices? I know that VGA Sub-D or S-Video should work, but IMHO this is not state of the art. Does an adapter D-Video to DVI exist?
    Regards,
    Marsu
    [Edited by: admin on 14-Mar-05 21:12]

    Hi marsu
    D connector port on Qosmio you can connect to SCART port on TV. The cable is provided with Qosmio notebook. Sorry but I think there is no possibility to connect it to DVI port on your TV.
    Only thing that you can do is to ask some experts in electronic store if there is some solution for this issue.

  • Fatal error while filling connection pool

    I was not getting a connection to an Oracle database and I was getting the following error in cms.log: "FATAL  Connector - Unable to create connection pool for T_Orbis_Oracle: Fatal error while filling connection pool for jdbc:oracle:thin:@MESDB:1521:ASPENB21" where T_Orbis_Oracle is the xMII link name and the database ASPENB21 is on server MESDB. I changed the database username in the link to SYSTEM and I then got a connection and a Created Connection pool message in the log. I then changed back to the username which originally was giving the error and it now also gave me a successful connection. I am now worried that there is an issue in the background which is gradually building up and will begin to fail again as previously. Can anyone explain what is causing this problem and suggest how I can correct it? Thanks, John.

    John,
    Check you have installed the JDBC driver ojdbc14.jar (works for both 9 and 10).
    Also check the server package:
    MII 11.x--->ServerPackage com.lighthammer.Illuminator.connectors.IDBC
    MII 12.x--->com.sap.xmii.Illuminator.connectors.IDBC
    Carefull when you set up the string because some oracle databases have servicenames instead of SID, and the url was different if you use them instead of the SID.
    For services names the url is jdbc:oracle:thin@host:port:SID
    Also check your Network firewall between MII and DB and ports too.
    Oracle9i installs with a number of default accounts.You must unlock all other accounts before using them. Oracle recommends changing all user passwords immediately after installation.
    -Suresh
    Edited by: Suresh Hiremath on Jul 29, 2009 8:20 AM

  • Using an External Hard Drive for iMovie Editing and Burning to DVD

    Between iPhoto, iTunes and other applications I am rapidly running out of hard drive space on my 2003 iMac. Because of this, I recently purchased a Lacie 250 GB Firewire external hard drive and was hoping to use it for iMovie editing and buring of DVDs, because of the large amount of disk drive space video eats up. Is it it possible to "load" iMovie and iDVD to the external drive and edit/burn videos on that drive? If not, is there some other way to use that external drive in this process? Thanks in advance for any assistance that can be provided.

    Scooper
    see my reply to Trollus, just posted:
    That's how I do all my stuff now - via external lacie 'brick' drive. The only trick is when you begin your iMovie project, hit save immediately after creating the new project, and save the project file in an appropriately named folder on the external hard drive (don't call it 'Movies' as it'll be confused with your Powerbook's movies folder). Then as you import all your clips from your movie camera, they will be written to the external drive, rather than you G4's drive. Very handy.
    I do all my iMovie and iDVD stuff via the external Lacie drive - the FireWire 400 interface is quick enough (ie never had skipped clips, etc). I also save all iDVD finished projects as disc images on the external drive and burn DVDs from those at slow speed via Disc Utility. No coasters...:-)
    Greetings from Canberra
    Dave
    iBook G4   Mac OS X (10.4.8)  

  • Save Query - An error occurred while creating connection strings for the query

    A workbook trying to edit and reload I get the following error "Save Query - An error occurred while creating connection strings for the query" No Power Pivot data model or anything.

    I am getting the same error when editing a Power Query in an Excel spreadsheet. It happens when I change a Group By step to do a Sum instead of Count Rows.

  • Installing IBM Websphere Advanced Edition 3.0 and connecting to Oracle 81 database

    When we install IBM Websphere Advanced Edition 3.o for Solaris and try connecting to the Oracle 81 database some errors were faced as below
    003.820 1ef19816 ConnectionPoo W Failure while creating connection java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=135290880)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at java.sql.SQLException.<init>(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.driver.OracleConnection.<init>(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.getConnectionInstance(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.connect(Compiled Code)
    at java.sql.DriverManager.getConnection(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.ConnectionPool.<init>(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext._ConnMgrBaseImpl.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.ConnectionManager.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.SMDataSource.getConnection(Compiled Code)
    at com.ibm.ejs.ns.CosNaming.CreateNsTables.dbInit(Compiled Code)
    at com.ibm.ejs.ns.CosNaming.NameServer.init(Compiled Code)
    at com.ibm.ejs.sm.server.ManagedServer.initializeNameService(Compiled Code)
    at com.ibm.ejs.sm.server.ManagedServer.initializeRuntime(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.initializeRuntime(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.main(Compiled Code)
    003.856 1ef19816 CreateNsTable W Failed to get a connection java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=135290880)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at java.sql.SQLException.<init>(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.driver.OracleConnection.<init>(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.getConnectionInstance(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.connect(Compiled Code)
    at java.sql.DriverManager.getConnection(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.ConnectionPool.<init>(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext._ConnMgrBaseImpl.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.ConnectionManager.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.SMDataSource.getConnection(Compiled Code)
    at com.ibm.ejs.ns.CosNaming.CreateNsTables.dbInit(Compiled Code)
    at com.ibm.ejs.ns.CosNaming.NameServer.init(Compiled Code)
    at com.ibm.ejs.sm.server.ManagedServer.initializeNameService(Compiled Code)
    at com.ibm.ejs.sm.server.ManagedServer.initializeRuntime(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.initializeRuntime(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.main(Compiled Code)
    004.208 1ef19816 AdminServer A Initializing WebSphere Administration server
    004.228 1ef1ff18 DrAdminServer A DrAdmin available on port 36,133
    004.248 1ef19816 ConnectionPoo W Failure while creating connection java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=135290880)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at java.sql.SQLException.<init>(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.driver.OracleConnection.<init>(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.getConnectionInstance(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.connect(Compiled Code)
    at java.sql.DriverManager.getConnection(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.Connect ionPool.<init>(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext._ConnMgrBaseImpl.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.ConnectionManager.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.SMDataSource.getConnection(Compiled Code)
    at com.ibm.ejs.sm.util.db.DBMgr.initialize(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.startConnectionMgr(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.initializeRuntime(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.main(Compiled Code)
    004.263 1ef19816 DBMgr F Failed to create a data source: java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=135290880)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at java.sql.SQLException.<init>(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.driver.OracleConnection.<init>(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.getConnectionInstance(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.connect(Compiled Code)
    at java.sql.DriverManager.getConnection(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.ConnectionPool.<init>(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext._ConnMgrBaseImpl.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.ConnectionManager.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.SMDataSource.getConnection(Compiled Code)
    at com.ibm.ejs.sm.util.db.DBMgr.initialize(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.startConnectionMgr(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.initializeRuntime(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.main(Compiled Code)
    FATAL Failed to create a data source: {0} java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=135290880)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at java.sql.SQLException.<init>(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.driver.OracleConnection.<init>(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.getConnectionInstance(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.connect(Compiled Code)
    at java.sql.DriverManager.getConnection(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.ConnectionPool.<init>(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext._ConnMgrBaseImpl.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.ConnectionManager.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.SMDataSource.getConnection(Compiled Code)
    at com.ibm.ejs.sm.util.db.DBMgr.initialize(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.startConnectionMgr(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.initializeRuntime(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.main(Compiled Code)
    java.lang.Throwable
    at java.lang.Throwable.<init>(Compiled Code)
    at com.ibm.ejs.ras.CBuffLogger.fatalEvent(Compiled Code)
    at com.ibm.ejs.ras.Tr.fireTraceEvent(Compiled Code)
    at com.ibm.ejs.ras.Tr.fatal(Compiled Code)
    at com.ibm.ejs.sm.util.db.DBMgr.initialize(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.startConnectionMgr(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.initializeRuntime(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.main(Compiled Code)
    Please help
    Thanks in Advance
    null

    When we install IBM Websphere Advanced Edition 3.o for Solaris and try connecting to the Oracle 81 database some errors were faced as below
    003.820 1ef19816 ConnectionPoo W Failure while creating connection java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=135290880)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at java.sql.SQLException.<init>(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.driver.OracleConnection.<init>(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.getConnectionInstance(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.connect(Compiled Code)
    at java.sql.DriverManager.getConnection(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.ConnectionPool.<init>(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext._ConnMgrBaseImpl.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.ConnectionManager.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.SMDataSource.getConnection(Compiled Code)
    at com.ibm.ejs.ns.CosNaming.CreateNsTables.dbInit(Compiled Code)
    at com.ibm.ejs.ns.CosNaming.NameServer.init(Compiled Code)
    at com.ibm.ejs.sm.server.ManagedServer.initializeNameService(Compiled Code)
    at com.ibm.ejs.sm.server.ManagedServer.initializeRuntime(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.initializeRuntime(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.main(Compiled Code)
    003.856 1ef19816 CreateNsTable W Failed to get a connection java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=135290880)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at java.sql.SQLException.<init>(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.driver.OracleConnection.<init>(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.getConnectionInstance(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.connect(Compiled Code)
    at java.sql.DriverManager.getConnection(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.ConnectionPool.<init>(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext._ConnMgrBaseImpl.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.ConnectionManager.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.SMDataSource.getConnection(Compiled Code)
    at com.ibm.ejs.ns.CosNaming.CreateNsTables.dbInit(Compiled Code)
    at com.ibm.ejs.ns.CosNaming.NameServer.init(Compiled Code)
    at com.ibm.ejs.sm.server.ManagedServer.initializeNameService(Compiled Code)
    at com.ibm.ejs.sm.server.ManagedServer.initializeRuntime(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.initializeRuntime(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.main(Compiled Code)
    004.208 1ef19816 AdminServer A Initializing WebSphere Administration server
    004.228 1ef1ff18 DrAdminServer A DrAdmin available on port 36,133
    004.248 1ef19816 ConnectionPoo W Failure while creating connection java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=135290880)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at java.sql.SQLException.<init>(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.driver.OracleConnection.<init>(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.getConnectionInstance(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.connect(Compiled Code)
    at java.sql.DriverManager.getConnection(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.Connect ionPool.<init>(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext._ConnMgrBaseImpl.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.ConnectionManager.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.SMDataSource.getConnection(Compiled Code)
    at com.ibm.ejs.sm.util.db.DBMgr.initialize(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.startConnectionMgr(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.initializeRuntime(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.main(Compiled Code)
    004.263 1ef19816 DBMgr F Failed to create a data source: java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=135290880)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at java.sql.SQLException.<init>(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.driver.OracleConnection.<init>(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.getConnectionInstance(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.connect(Compiled Code)
    at java.sql.DriverManager.getConnection(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.ConnectionPool.<init>(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext._ConnMgrBaseImpl.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.ConnectionManager.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.SMDataSource.getConnection(Compiled Code)
    at com.ibm.ejs.sm.util.db.DBMgr.initialize(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.startConnectionMgr(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.initializeRuntime(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.main(Compiled Code)
    FATAL Failed to create a data source: {0} java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=135290880)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at java.sql.SQLException.<init>(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
    at oracle.jdbc.driver.OracleConnection.<init>(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.getConnectionInstance(Compiled Code)
    at oracle.jdbc.driver.OracleDriver.connect(Compiled Code)
    at java.sql.DriverManager.getConnection(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.ConnectionPool.<init>(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext._ConnMgrBaseImpl.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.ConnectionManager.getConnectionPool(Compiled Code)
    at com.ibm.ejs.dbm.jdbcext.SMDataSource.getConnection(Compiled Code)
    at com.ibm.ejs.sm.util.db.DBMgr.initialize(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.startConnectionMgr(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.initializeRuntime(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.main(Compiled Code)
    java.lang.Throwable
    at java.lang.Throwable.<init>(Compiled Code)
    at com.ibm.ejs.ras.CBuffLogger.fatalEvent(Compiled Code)
    at com.ibm.ejs.ras.Tr.fireTraceEvent(Compiled Code)
    at com.ibm.ejs.ras.Tr.fatal(Compiled Code)
    at com.ibm.ejs.sm.util.db.DBMgr.initialize(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.startConnectionMgr(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.initializeRuntime(Compiled Code)
    at com.ibm.ejs.sm.server.AdminServer.main(Compiled Code)
    Please help
    Thanks in Advance
    null

  • IPad slow in re-connecting to a known WiFi network

    Hi all,
    I have noticed that my iPad is sometimes slow in re-connecting to a known wi-fi network (my home network).
    I have been doing some online research and it seems like it's an issue apple acknowledged.
    Normally it connects right away, other times it takes about 4-5 seconds.
    In rare occasions it takes up to a minute...
    Is this normal?
    Message was edited by: renzopanta

    The only times mine does not instant connect is when it has been away from the network for a period of time...and then it seems like only a second or two. Safari opens immediately but mail can take several seconds to figure out the connection. If I stay within the router signal, and sleep the iPad, when it wakes it is on the network with no delay.
    Hope this helps.

  • Why is my macbook air running slow while web browsing, why is my macbook air running slow while web browsing

      a few days ago my macbook pro that i recently purchesed for christmas started running really slow while web browsing. I looked at all the memory and all that and it was fine. any advice?

    Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
    Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
    If your browser is Safari, then from the Safari menu bar, select
    Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Any change?
    Quit and relaunch the browser. Any change?
    Log out and log back in. Any change?
    Enable Private Browsing in the Safari menu. Any change?
    Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
    If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
    If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
    Again, if only Safari is involved, open the iCloud preference pane and uncheck the box marked Safari, if it's checked. Any change?
    Are there any other devices on the same network that can browse the Web, and are they affected?
    If you can test Safari on another network, is it the same there?
    If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

  • Imovie 08 - Slow motion effect

    I have looked through the video and PDF tutorials and cannot see how to put my clips into slow motion. This is addressed in the tutorials for earlier IMovie editions (i.e, Lesson 4 - Motion Effects), but I can't find anything in the video tutorial that addresses this for 08. Clicking and dragging the clip's duration doesn't work.

    the actual version of iM08 has no effects anymore..
    for 'elaborated' projects, use iMHD6, you get it as iM08-owner for free here: http://www.apple.com/support/downloads/imovieHD6.html
    or, for excellent slow-mo, use a free 3rd party app, discribed on my site:
    http://karsten.schluter.googlepages.com/slowmowithim08
    or, if you want 'serious' movie making, consider the purchase of FCE4 ..

  • Macbook running slow when not connected to charger

    My Macbook Pro 13" is running slow when not connected to energy.
    Does anyone know why is that happening, how can I fix it?
    Thank you very much.
    if you have any idea.
    Att
    Raissa
    <Email Edited By Host>

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Can iMovie edit 50p footage?

    Okay, so i don't yet have my Mac but am getting it soon, if everything goes right. So here's my question(s).
    Can imovie edit footage in 720p 50 fps I have a Canon 600D and are in a PAL region so 60fps won't do, or do i have to convert it?
    Also, i know that Final Cut Pro X cannot work with the H.264 codec, so can imove or again do i have to convert?
    One last question, with this brand-spanking-new 50p footage, i was planing to slow it down within iMove, but i have read somewhere that all imovie does is skip frames not double or triple the time that it is played over like most slow motions, or do i need to buy FCP X for this?
    Thanks
    The_Ele4ant

    Great video btw, I still have a few questions though.
    First of all how did you import and edit the 50p footage as a poster mentioned above that iMovie does not natively support 50p footage import an editing.
    Finally how did you achieve such fluid slow motion, did you find a way to do 'real' slomotion as in extending the played time of footage (therefore slowing sown without skipping frames) or the meathod of just skipping frames. All using iMovie or ther free software available on a mac.
    Thanks
    The_Ele4ant

  • Why is iMovie so slow?

    I have not used iMovie in a while and recently I opened it up and it took FOREVER to open. Then, when it was finally open, it would give me the little swirling ball of colors. The first time I had to force quit it and it is just very slow. It has become inconvenient seeing as that I can't work on any projects because nothing loads.

    Hi
    Several things can do this
    • HD-material takes much more power to be processed
    • if Hard Disk is filling up
    • lot's of icons on DeskTop (YES strange but reported to matters)
    • other processes running in back-ground - energy savers, frame savers, spotligt search, TIME MACHINE, File Vault, etc - I turn all OFF
    TO GET IT TO WORK SLIGHTLY FASTER
    • Minimum of 25Gb free space on Start-Up hard disk
    • No other programs running in BackGround e.g. Energy-Saver
    • Don’t let HD spin down or be turned off (in Energy-Save)
    • Move hard disks that are not to be used to Trash - To be disconnected/turned off
    • Goto Spotlight and set the rest of them under Integrity (not to be scanned)
    • Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set pointer to this - turns on screen saver - to show that it has nothing to show
    • And let Mac run on Mains - not just on battery
    AND - Creating a New User-Account - Log into this - and run iMovie - made my iMovie fast as New and for a specific project with a deadline - then this can help a lot.
    Yours Bengt W

Maybe you are looking for