IMovie encoding time too long

I have iMovie 09 and final project finished to 1hr 17min. with titles, audio. I selected share folder>Export to QuickTime Move>Default settings.
It then starts encoding etc.. but the time was 14hrs!! So I let it run over night, This morning the Time remaining has not moved it now says 17hrs and still encoding.
I have this issue everytime I export to QuickTime or any other . Last time this movie was exported it was fine it did it in 12hrs but had to run overnight, but somehow it was encoding it twice! otherwods it finished doing it the first time and at the end of export knowing its done it started again!!
Is there anyway I could import the edited movie into FCP with all editing in place? Any suggestions??
I need to get this job out for a client by this weekend..
What is causing the lon encoding time. My Mac is the Following:
Model Name:          Power Mac G5
Model Identifier:          PowerMac7,3
Processor Name:          PowerPC G5 (3.0)
Processor Speed:          2.5 GHz
Number Of CPUs:          1
L2 Cache (per CPU):          512 KB
Memory:          4.5 GB
Bus Speed:          1.25 GHz
Boot ROM Version:          5.1.8f7
Serial Number (system):
Hardware UUID:          00000000-0000-1000-8000-000D93589162

Your Name is GERMAN, so maby you speak german as well and we can write in german???
this is an international board, so, very little participants do speak/write perfect english...
my German 'home' is macuser.de... the iM board is:
http://www.macuser.de/forum/forumdisplay.php?f=79
over there, I'm 'k_munic' ...

Similar Messages

Average processing time too long in workload monitoring (ST03N)

Hi expert,
I wander why average processing time too long in workload monitoring (ST03N)
for example
avg.response time : 4700 (ms)
avg.processing time : 4200 (ms)
avg.CPU time : 300 (ms)
avg.DB time : 200(ms)
OS (CPU and memory ) status is nomal.
please tell me why processing time too long and what do I check more.
thanks

Hi
Processing Time is the total time taken i.e. Time when user clicks on submit button to send data to SAP System till the time SAP System processes everything and shows the updated screen back to the user. It includes Network Time also.
Average Processing Time is the Processing Time per Dialog Step
In ST03N workload Monitor, there are different Task Type like Dialog, Background, RFC, Update,..........
Could you be more specific where do you find the Average Processing Time high ? I mean for which Task Type.
If you have users complaining for Performance problem check their Network Time also.
Let us know, if this information was helpful to you.
with regards,
Parin Hariyani

Excess iMovie encoding time

With my recent iMovie Project located on my 300GB firewire Seagate external drive it took over 9 hours to encode a 37 minute DVD to get ready for burning. This seems excessive. Does using an external disk drive for iMovie Projects slow down encoding? Using the internal hard disk with the same machine it took over 6 hours to encode a28 minute iMovie.Does anyone have any comments or advice?
Thanks, Bill macatoo

Macatoo,
The speed of your iMac's processor is the real determining factor for encoding speed and not the fact that the project resides on an external drive.
The encoding times you are experiencing may quite possibly be normal.
I assume you are using iDVD so you might also try posting in the iDVD discussion area.
Mat

Elapsed Timer Too Long?

Is there a limit to the duration I can input into an elapsed timer VI? In my program the user can specify a duration of up to 24 hrs. My program is supposed to hold current conditions for the specified durations. When the user sets it 1, 2, 3 or four hours it holds the current conditions fine. When they set it to 24 hours the current conditions are not held for 24 hours. Is this too long of a duration for this VI (86,400 seconds)?
thanks.

rchaoua wrote:
The question regarding maximum duration a elapsed time VI has still not been answered.
You can convert the "elapsed time" express VI to a plain VI by "right-click...open front panel" and inspect the code yourself. There are no secrets! You can see that it converts the timestamp to DBL and operates on the lower precision DBL values. This should be sufficient for much more than 24 hours, so something else is wrong in your case.
Can you attach an example that shows the incorrect behavior (=premature elapsation?).
rchaoua wrote:
But I have another question; Can you have multiple elapsed time VI in a single piece of code and not have it affect the other elapsed VIs? I have three elapsed timers in my code (in different panels) and get the sneaking supsicion that they are not behaving nicely with each other. But I am not sure. I was hoping someone has expereince with this scenario and could shed some light.
The crucial subVIs are reentrant and thus there should be no interaction between multiple instances of the "elapsed time" express VI. Each will keep it's own state. Why do you suspect that they interact?
LabVIEW Champion . Do more with less code and in less time .

NI7358 Acceleration time too long

Hi all,
First, let me introduces briefly our application for your better understanding before touch the problem.
We're using NI7358 to control 8 servo motors(Mitsubishi HC-KFS13, 100W, 3000RPM, 131072Counts/Rev) for pick and place. The amplifier is also Mitsubishi one MELSERVO-J2M-P8A. From view of NI7358 all 8 axes are open-loop stepper while amplifier will close-loop control the servo motors. One limitation here is this amplifier only can accept 200KPPS pulse rate input, so we set amplifier internal gear ratio to 4096/125 to achieve its maximum speed.
GearRatio=(3000rpm*131072count/60)/(200*1000counts/sec)
Then based on this ratio we can know the resolution of "stepper" in view of NI7358 is 4000RPM. (131072*125/4096)
Now our problem is:
The system requires these motors move in short distance(1200steps for NI7358) in the shortest time. So we want to shorten the acceleration/deceleration time as possible as we can. As we test the same application before using Keyence PLC as pulse generator, it can meet our target so we expect NI also can.
During testing using MAX under 1-D interactive, when I set Velocity=3000rpm, Accel/Decel=20000rps/s, target=1200steps, I can get the best result around 1040rpm(peak velocity) with Accel/Decel time around 50ms. The time is too long for us. If I set increase Accel/Deceleration to its maximum* NI7358 will stop pulse output at all(don't know why but suspect it's because of short distance)
* Maximum Accel/Deceleration(RPS/s) = Amax X (1/Ts) X (1/Ts) X (1/R) (refer to the description of "flex_load_rpsps")
for our case: Amax=32counts/sample; Ts=0.25ms; R=4000steps/Rev, result is 128000(RPS/s)
Questions:
1. Is Amax=32counts/sample hardware fixed?
2. Any reason can cause NI7358 stop output pulse when I set maximum acceleration/decelration?
3. Does NI provide time-based profile instead of velocity one so we can set acceleration/deceleration time directly?
4. Can I use direct pulse output mode just like a pulse generator instead of current profile output?
5. Under open-loop mode, if I change PID & acceleration feedforward gain, do these will affect the output pulse performance?
6. If we change the control circuit from open-loop stepper to close-loop servo system, does it can solve our problem?
7. How does the trajectory generator produces the count/steps output during the acceleration? I create an excel file(attached below) try to draw out the relationship between the sample, velocity and acceleration, anyone can check for me it's correct or not?
My formula is here:
Position2 = Position1 + Velocity2*(Sample2-Sample1)
Velocity2 = Velocity1 + Acceleration*(Sample2-Sample1)
All comments are appreciated!
Attachments:
Profile Study.xls ‏28 KB

BO has no controls over VPN or network bamdwith, it takes what OS and DB drivers give it.
You'll need to identify at which point of the workflow to refresh the report the slowness is occuring.
You'll need to enable webi tracing and see how long the actual refresh take.
You'll need to enable network traces to see where in the network the slowdown is occuring.

Profile WS run time too long

My first test run (in dev) of the custom Java PWS against a SQL server database seems to be taking too long. Its seems to be taking appx. 1 second or more per user. This will be a problem when processing around 20,000 users. We can't have a PWS running for 4-6 hours everynight.
I'd really appreciate any tips to optimize this for faster performance. I am opening DB Connection and running 2 queries for each users and clsoing the statement and connection. Can I do this another way so I open the DB connection(and maybe statement) for the Profile Source only once and release the connection etc. after the whole job is done or in case of errors.
Please help as this could be a huge bottleneck for us!
Thanks.
Vanita
Staples

Hi Akash,
Thanks for your quick reply. Unfortunately I don't have any signature field to limit the profile sync by. I am currently running the PWs in ToMCAT 4.1.30. We plan to deploy on WAS in dev. I am not sure if there is connection pooling being done by Tomcat in 4.1.30 version. Do you have any information on that? I am doing db connect and 2 property queries in the getuserproperties method.
1. Would the connection pooling (if done in WAS) make any difference to the run time?
2. Would opening the connection in initialize() method versus GetUserProperties() make any difference?
As always, thanks for your help.
Vanita
------- Akash Jain wrote on 3/1/05 1:25 PM -------Hi Vanita,On recent hardware, you should be able to perform an initial profile sync at at a rate of ~10/second. This means you should be able to perform your 20k users profile sync in under an hour. Resyncs should be much faster if you use a signature attribute.
I'm going to assume you're hitting some database backend with a table structure like the following:Users Table String UserGUID Date LastModified
Properties Table int PropID String UserGUID String PropValue
You have your users keyed off a unique name - a GUID in this example - and properties in a seperate table keyed off PropID and GUID.
Lets review the protocol and each step:a) initialize() - sends the parameters of the profile sync to the PWS, this is a good place to do a single query to your database in order to cache all user unique names and signatures (LastModified dates) in a HashTable. This will make re-syncs much faster since subsequent AttachToUser() and GetUserSignature() calls will be derived from this HashTable.b) attachToUser() - in this call you can simply lookup your user record against the HashTable created in Initialize(). If no entry is returned, then throw a NoSuchUserException. If a user does exist continue.c) getUserSignature() - again use the HashTable created in Initialize() to lookup the signature for this user. return it as a String.d) getUserProperties() - if called, this means the signature you sent back in step (c) has changed since the last profile sync. you now want to make a call to your properties table (a single DB call) to load all the property values for the user. return these as a UserPropertyInfo object.
During an initital sync, you will always get to step (d) above. During re-syncs, assuming there is low churn, I'd say a max of 1% of your calls will get to step (d) and thus the re-sync should be an order of magnitude faster in most cases.
With respect to database connections - if you are opening and closing a connection for each user, this is pretty poor with respect to performance. Your best bet in Java is to use a single connection (this is a single threaded process) which is setup in initialize(). In the shutdown() method, close this connection.
I hope this helps, the combination of using a single connection, using the signature attribute and caching all the users unique names and signatures in one call at the start of the profile sync should drastically increase performance.
Thanks,Akash

Download time too long

Why is it taking too long to download a song? Im talking HOURS if it even happens!

Could you download the graphics dynamically as they are required?
So, the air app would be the master 'app' and those additional
graphics are loaded from your server only when required? I'd bet this
would be the way you'd build it if the app were purely based online
and not via air?
Dave Cates
Managing Director
Redemption Media Ltd
www.redemptionmedia.co.uk
Interactive internet, media & communications solutions.
Sent from my iPhone

IMOvie 08 takes too long!

I have currently downloaded some movie clips from my VCR through an adapter and now it sits in
iMovie 08. First, I went through the whole movie which is approx. 1 hour of tape, and edited it, this took me at least 10 hours to do. Every time I made a change to a clip it took forever to render. 2nd, then I went through it again and identified which clips I wanted to move up into my project folder. Again, at least another 5 or 6 hours. Same problem, each time I hit the 'star' it took at least 45/50 seconds before the green line appeared. 3rd, now I am going through those clips and choosing the ones I actually want to put in my project folder. Same problem.
While I do think the editing potential of iMoive is great the time to do this is not acceptable. I am using an iMac G5 with 2 GB of RAM and I am running off an external 500 GB disk. Why is this taking me so long? Is there any way to turn off the rendering until I'm ready to download my project to another program?
Help,
Jane

Thought so, you're in the wrong forum sorry.
This is for iMovie iOS (iPads/iPhones).
I will try to get this moved to the correct forum for you.

IMovie takes way too long to share with iDVD

I did a software update (recommended by Mac) a few days ago, don't remember the detail. Since then iMovie/iDVD does not seem to be working properly. I have an iMovie project and wanted to share with iDVD. The "prepare project" process started and indicated that the estimated time will be over 6 hours. Usually it only took minutes. My movie is only 8 minutes long?
Any help?

I would suggest that you use SHARE/TO MEDIA BROWSER in Large size.
Then in iDVD, Open the Media Browser to the Movies tab and drag the movie you just made into your project.

Macbook boot time too long

Hello, boot time on my MacBook seems to be very long. Can you please take a look at my bootchart and tell me what do you think?
And also the gnome login is very slow. More precisely, it takes too much time for the desktop to appear after logging in.
Here is the bootchart:
http://i49.tinypic.com/5yrk11.png
Last edited by exapplegeek (2012-07-08 22:00:21)

exapplegeek, your thread title is far too general. Please rephrase it such like: "Macbook boot time problem" as soon as possible.
And leave the "[BOOTCHART]" part out.

Email loading times too long (Gmail, E75)

Hi dudes, and thanks for reading.
Email provider: Gmail
Phone: E75
Phone firmware: 202.12.01 (the newest)
I'm getting pretty long waiting times when my phone loads my emails.
I have set up an account to the phone's email application. It lists the emails in real time, but when I try to open an one, the loading time gets overwhelming.
It is not a pleasure to use the email application.
Can I do anything for this? Another app?
Any help wuold be appreciated!!!

Multiple reasons too hard to guess.
First step of ts - reset network settings

Adobe webdynpro taking time too long

Hi,
Initially, I have Read Timed Out issue. I;ve incresed the Web Container timeout to 360 seconds. but now, when I run the program with Interavtive form, it tooks very long time. It's been 30 minutes and still going. I do see the log mentioned not found ServiceContext, Any idea what's wrong?
[code]org.omg.CORBA.BAD_PARAM: Not found ServiceContext with id=0 vmcid: OMG minor code: 26 completed: Maybe
 at com.sap.engine.services.iiop.internal.giop.ClientRequest.get_reply_service_context(ClientRequest.java:284)
 at com.sap.engine.services.ts.jts.ots.PortableInterceptor.ClientJTSInterceptor.receive_reply(ClientJTSInterceptor.java:91)
 at com.sap.engine.services.iiop.internal.giop.ClientRequest.dealReceiveReply(ClientRequest.java:133)
 at com.sap.engine.services.iiop.internal.giop.ClientRequest.dealReceiveReply(ClientRequest.java:125)
 at com.sap.engine.services.iiop.server.portable.Delegate.invoke(Delegate.java:282)
 at org.omg.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:457)
 at com.adobe.service._FontManagerStub.getAdobeServerFontDirectory(_FontManagerStub.java:33)
 at com.adobe.document.XMLFormService.getFontDirectories(Unknown Source)
 at com.adobe.document.XMLFormService.getCommonDir(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.adobe.service.ProcessResource$ManagerImpl.getConfigPropertyString(ProcessResource.java:1080)
 at com.adobe.service.Manager_Tie.getConfigPropertyString(Manager_Tie.java:55)
 at com.adobe.service._ManagerImplBase._invoke(_ManagerImplBase.java:101)
 at com.sap.engine.services.iiop.internal.InvokeHandlerHolder.invoke(InvokeHandlerHolder.java:35)
 at com.sap.engine.services.iiop.internal.giop.IncomingRequest.process(IncomingRequest.java:244)
 at com.sap.engine.services.iiop.internal.giop.ConnectionParser.readMessage(ConnectionParser.java:85)
 at com.sap.engine.services.iiop.server.CommunicationLayerImpl.request(CommunicationLayerImpl.java:209)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)[/code]

OK. I found the problem. In one of the java parameters in the installation guide, It mentioned to add:
-Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
Well, looking at the rest of the parameter for -Dorg..Class, it always followed by '=', so I change into:
-Dorg.omg.PortableInterceptor.ORBInitializerClass=com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
And now it is working just fine.

Windows 8.1 first boot time too long

After Sysprep, windows 8.1 tooks long time to boot, is it normal?
N.A.Malik

Hi,
Generally, when you sysprep an image and deploy it to other devices, it would prepare the device settings, registry update and other computer configuration. This phase would take some time. We call it as specialize and OOBE pass.
Here we have a metric to assess the first boot time, you can take a look at this guide:
First Boot Performance
http://msdn.microsoft.com/en-us/library/windows/hardware/jj130825.aspx
Alex Zhao
TechNet Community Support

Media encoder takes too long

When I render any sequence, such as a 4 minute sequence, as either a Quicktime file or AVI, Adobe Media Encoder takes many hours to
render it. I had a previous issue where the export quality was too low. Adobe told me to install K-Lite Codec pack. After
that, the quality was better but not perfect. I would render a movie a file and compare the Premiere Pro and original video file. T
he rendered video was lower quality than the original video file. Now, Adobe Media Encoder estimates 3 hours to render a 3 minute SD
AVI sequence or any other type of video file. Adobe Media Encoder never seemed to work properly.
Windows XP Professional and Premiere Pro CS4

hi harm, thank you for the response.
Harm, I have heard that K-Lite might not be the cause here.
That this media encoder problem can be solved without removing K-Lite.
I would not prefer removing it as it has improved my export quality.
Do you have any other suggestions

Are Skype support response times too long for you?

Just answer yes or no....
....and then tell me how long you waited.
i.e. Yes 7 hours
I'm really interested in finding out how much I can rely on this forum for a quick response to problems as I use Skype to communicate with my customers, suppliers and colleagues worldwide.
The response time to critical questions like "because of a 'technical problem at Skype" I can't allocate credit to my coworkers so as they can call up their contacts phones" - (a.k.a I want to give Skype some money) is unreasonably long. I'm trying to guage how long I can expect to wait.
Sonic

Hello sonic,
I see you are asking about response time on the forum for questions to be answered.
Well, it just depends on who is online at the time you post your question. We have many professional users like TheUberOverlord and Primemover that are here all the time and answer qualified questions all day. The Skype Enterprise Team are here 24/7 but are sometimes answering Chats from customers in the Live Chat Sessions of Skype Manager.
If you want an immediate response, you need to log into your Skype Manager and click on the Chat Button in the top right of that screen and you will be connected to us immediately. We are here 24/7 for your support. It is a Business Class Service and we talk to customers from all over the world day and night. We are here to get customers PBX's and SIP compatable devices connected to Skype Connect and can answer most any question on products and devices.
Thank You for using Skype and the Skype Community Forums.
Regards,
Victor S.
Skype Enterprise Support

IMovie encoding time too long

Similar Messages

Maybe you are looking for