IMovie Events & Projects

I am a past iMovie 6 user..... I now have the 09 version. I am not able to use iMovie 6 anymore ...cannot be used with the new computer.....(unless someone knows of a trick?)
anyway, I am trying to understand the concept of the new iMovie......event verses projects. It is not like before where you created and named a new project. I am not sure how this works.....when I am creating a new project where do I begin? Can anyone clarify the event information verses the project information? I think that once I understand the concept all will be fine but I just cannot seem to get my head around it.
Thanks...it is much appreciated!
Sim

Sim333,
Have you checked out the videos on the website? Though basic, they do a great job showing how to get started and how to get started...
http://www.apple.com/findouthow/movies/

Similar Messages

Delete iMovie Events, Projects, Sharing after update iMovie 10.0?

After updating to iMovie 10.0 in Finder appears a 'iMovie-library' but the folders 'iMovie Events, Projects and Sharing' are still there too. These last folders are roughly same size as the new 'iMovie-library'. Can you delete these old folders? I could use the space!
I have already updated my old library.
Thanks in advance!

I updated to Mavericks and the new iMovie last night as well as I have always been an early adopter. Unfortunately this time, I think I was a little too quick.
From what I can tell, the new iMovie takes all old events and creates a new iMovie library. I believe if you wanted to, you could potentially revert back via time machine and grab the old imovie back and use the old events and projects folders? Can someone please confirm? I would like to do this.
After I did my upgrade, I was left with to iMovie events libraries. One was called iMovie events and the other imovie events 1. The second one is my old library that resides on my external thunderbolt drive where I would like to keep it. The iMovie theater folder was also added but inside the Movies folder on my internal drive. I don't want that either.
I usually adopt pretty quickly to iMovie changes but at this point it might have finally pushed me to Final Cut Pro X, to get back that iMovie linear "feel". I can't see anything at all anymore in the new iMovie that shows any time line and ease of use.
Cheers

Move iMovie Events & Projects to a new Mac

I just got a new Mac and want to move my iMovie events and projects from the old machine to the new one. I seem to recall reading an article on Macworld a while back saying that you shouldn't just go through the finder to copy the files from one disk to another. What is the proper way to move the files from one machine to another - there are roughly 200GB worth of files.
Both units are running iMovie '11

AppleMan1958... unlike many posts I find on these forums I really appreciate that you answer the questions and do so quite authoritatively.
In keeping with the theme of this particular discussion, I have a question for you (or anyone else who can answer it).
I moved several iMovie 11 project files along with the associated events to a Mac OS Extended (Journaled) external hard drive. I did this within the iMovie Project Library window on a Mac Mini running OSX 10.6.6
After properly ejecting the drive I connected it to a Mac Pro running 10.6.5. I open iMovie on the new machine (iMovie 09) and the drive shows up in the Project Library window but the projects do not show up under it. (The projects are there because I see them in the Finder.) What I want to do is move the projects to the new machine.
I did this before so I know it works. My question is: why would the projects I want to move now not show up in the Project Library window?

Importing iMovie Events/Projects to FCP X?

Hi I am a complete newbie to the MAC forums. Apologies in advance for the long winded post!
Past:
I have been a Windows / Video Studio user for many years. (Win 7, Q6600 cpu, 8gb RAM)
I principally make DVD's of slideshows, interspersed with video and with a music background for myself, businesses and friends.
I'm not a "Pro" by any stretch of the imagination but I've been successfully making reasonable quality output.
Now
I've moved to the Mac and as my profile shows I've bought a reasonable machine - iMac 27", 16gb RAM, i7 3.4gHz cpu, AMD Radeon HD 6970M (2GB) and 1TB main drive and 3TB external drives.
I have iMovie '11 and (after reading extensive reviews) just purchased FCP X to see if I can -
Utilize the 64bit the iMac is capable of; and
give myself more flexibility for creativity (VS X3 had heaps of themes, transitions, titling etc)
Questions
I expected FCP X to import the iMovie Events and Projects hassle free (most bad reviews referred to comparisons with FCP 7 etc.) However when I import the projects -
The iMovie MAPS feature is not supported (this is a real hassle as this was a recent welcome introduction from iMovie '09 on). Apple support suggested I export the whole project to a QT movie then import into FCP X but as I told them I bought FCP X to speed up the process, not to process a 32bit app then import to a 64bit app to do my final output. (Since then my research suggests there is a workaround to the MAPS problem if I just create the Maps in iMove and export to QT and import to FCP X - Why would Apple not just continue this feature in FCP X?
All of my photos appear full screen in iMovie, however when I import to FCP X some of the photos are significantly smaller i.e. appear in a black frame. Is this a media problem or is FCP X not capable of importing the project in it's iMovie form?
All text frames (as intros to particular groups of photos) lose their formatting and the text is cropped and unreadable.
All this from a product that is purported to "import iMovie Events and Projects". The imported mess I have suggests I'm better off starting from scratch but this means the "import iMovie events" is useless?
Lastly, the plethora of options for output leaves me baffled to say the least. It is not helped because i am not a Pro but even iMovie is difficult to easily produce a high quality DVD for playback on a big screen TV. I try various options, SHARE>Media Browser>LARGE, or 1080p (produces 108 error in iMovie) Then import into iDVD to produce DVD menu and output to Image file prior to burning on SL or DL media.What is the best workflow to produce the best DVD output on a HD TV?
Thanks in advance for any help as time to complete some projects is against me.
George

Thanks Tom.
Do I understand correctly that to produce 90 minutes of high quality I need a Blu-ray burner? I follow that DL discs can only produce HD up to 40 minutes and to go beyond that I need a Blu-ray burner and disc.
On advice from Apple Support, I provided feedback for a feature request when I first struck the problem. I'll research the forums more to seek out answers to my questions. I'll have to find the "spatial conform" section. In the meantime I'll finish these projects as best I can in iMovie and then start my learning curve with FCP X as I am probably biting off more than I can chew at the moment.
Patrick and Tom, I appreciate you taking the time to share your wealth of knowledge.
With thanks,
George (in Tasmania Australia)

Unable to Understand iMove Events, Projects, or iMovie Photo Library. Help!

I've got iMovie 10.1 and, unlike other Apple software, I cannot make heads or tails about how it is storying my video clips.   Things that appear in IMovie Library do not appear in All Events. How can that be possible? Shouldn't All Events contain any clip I have imported? I can't even figure out what is the difference between those two folders.   I can't figure out what All Projects contains. either. It seems to contain the same thing that is in iMovie Library so why have two folders with different names that have the same things?
I've been trying to research this on the web and have not found anybody who can explain what these different folders mean.   Can somebody here do it?
Also, I can't delete a clip no matter what I do. If I right click on it and say move to trash (while in IMovie Library) it looks like it deleted it but when I go to the actual folder in the Finder, where IMovie Library is, the clip is still there.   This is one of those maddening cases where the delete button does not delete anything.
The help for iMovie is basically useless. I cannot find any explanation as to how to delete a clip or how to organize them using these confounding folder names that seem to be different names for exactly the same thing. Has anybody mastered this?

iMovie 10.1 stores everything in a library package with the extension .imovielibrary but you can have more than 1 library. When in iMovie, 'All Events' should show all the events in the currently open libraries just as 'All Projects' should do for projects. These are not actual folders but simply display all the items currently available from the open libraries.
Deleting clips is described in help under: Browse & organize the library - Organize your events & projects - Delete movies, trailers, clips, and events
Help does contain a lot more information that appears at first but its not always obvious which section to find it in. Its worth going through it all carefully because so many things have been changed in imovie 10 compared to 9.
Some patience is needed to get in tune with the new way of doing things.
Best of luck!
Geoff.

Time Machine Restore, iMovie Events/Projects/Movies

So I just restored my movies folder from a time machine backup from December of 2010. I did a fresh install of iLife11 and when I launch iMovie it doesnt seem to pickup any of the information in the Movies folder? Is there a way I can get Imovie to recatalog everything?

Thank you for your advice
I tried consulting Telstra premium services and other third party security consultants. I explained my steps and procedures upon each fresh installation and the extent of the hacking and they refused to service me. Additionally Telstra security center replied on the issue of using a proxy server that they only support windows operating systems. Last night an apple consultant told me to obtain the proxy server address and he will guide me through to setting it up. I hope this will resolve the security issue. However I'm not entirely sure. My iPhone was also hacked and 8 GB of data used in 1 day untill I caught on. Freaked me out since I had disconnected from the wifi.
I'm currently installing from flash drive and transferring my information from time machine. I think it's a full restore.
I am investing in a website in a couple of weeks however I'm not currently hosting one on my laptop.
Cheers
Peter

In making a "highlights" movie, using clips from different imported iMovie events, can I delete the larger iMovie event file from the Events browser and still work w the smaller clips in the Projects browser w/o having the larger files still loaded?

I have sucessfully imported 150 Sony digital 8mm movies (each one hour in length) into iMovie as 150 iMovie events. I have since successfully converted them from their original 13 Gb (.dv) file to an exported smaller 1.3 Gb (.4mv "large file") movie that I am happy with, using the iMovie projects browser. So now I have 150 " .4mv" movies on my internal HD as well as about half of my original raw data " .dv " movies on my internal hard drive.
Due to their large size (over 2 Tb), I do not have all the larger raw data (.dv) files on my 2Tb internal drive, just about half of them. What I want to do now is to create a new project in the Projects browser for each of my kids, and reload, starting with Tape #1, each of these larger files and do a highlights movie for each of my kids, wherein I pick out smaller clips from each 1 hour .dv iMovie event and paste them into the appropriate kid's Highlights project in the Projects browser.
Here's my question: If I load the first 5 large files back onto my internal HD, and paste in various shorter clips into each of my kids' Highlights project, and then if I delete those first 5 large files (they are backed up on 2 other 3Tb external HDs), can I keep doing this (reloading the next 5 large .dv files to work with), and ultimately take each of my kid's Highlights project and export as a .4mv movie EVEN THOUGH the earlier large .dv files are no longer on my internal HD, OR does my iMac need to have all these larger files loaded on my internal HD for me to eventually export each of my kid's Highlights project to a .4mv movie?
I have a 2011 era 27" iMac desktop w 2Tb HD internal and 250 Gb flash drive, and Lion OSX and iMovie 11.

Thanks. I tested it out and you were correct. I loaded 2 .dv movies from my external HD back onto my internal HD, and got them re-imported into iMovie, took a few short clips from each of the 2 iMovie events and pasted them into a new project in the Project Browser. Then I deleted these 2 "source clips" from my internal HD, closed iMovie and then re-opened it and found that iMovie would NOT export the smaller clips for a "highlights" .4mv movie without the "source clips" being available.
I read your link on Quicktime. It talks about mostly trimming, which is what I did with each iMovie event before I took each one as a project to export as a smaller .4mv file. But if I use Quicktime (do I need QT Pro or basic), what advantage is it to me to use QT over iMovie (I must admit I am a novice at iMovie and have never used QT or QT Pro as a tool)? Will it then convert any edits I make to a .m4v movie or do I need iMovie to do that?
Does QT allow trimming multiple segments out of a movie during one edit session, or can you only do 1 at a time? By that I mean that, for example, when I use Sonys Picture Motion Browser for my .mts movies, you can only set one Start and one End point for each edit/trim you do: it does not allow you to set multiple Start Stop points like iMovie allows in its Event or Project browser. You can only do one "trim" at a time, save it and then reopen to do another trim. not very useful.

How to Import iMovie v9 Projects/Events to iMovie v10

I had a heck of a time finding info on transitioning from the previous version (v9.0.9) to the current version (v10.0.7). One of the problems I was having was getting the new version to recognize my old Projects and Events. After some digging here and elsewhere, I figured out what was wrong and how to fix it.
In my case, I had provisioned iMovie 9 to keep the Events folder on an external hard drive while the Projects folder was on my iMac's internal drive in the Movies folder. Don't ask me why they were separated; I can't remember why I did that or even if it was a mistake. Whatever the reason, it caused trouble when it came time to upgrade.
iMovie 10 keeps all the Projects and Events in a single Library file. By default, this Library is placed in your Movies folder on your Mac's internal hard drive. During the initial installation, iMovie will ask if you want to import the old versions Events and Projects. You can opt to do it right then or wait until later. When you do attempt to import these files, iMovie 10 will look in the Movies folder for the previous version's iMovie Events and iMovie Projects folders. If you have both of these folders in their default position, the new iMovie should be able to immediately import the files by copying them to the new version's Library. The old files will remain in their folders and will be useable by the previous version without any problems.
If you have the previous version's Projects and/or Events folders somewhere other than where iMovie 10 expects to find them, you may encounter an error when you try to import the old files. Even if the attempt fails, iMovie 10 creates extra files inside the old folder that prevent a successful import if you try it again. You'll need to look inside the old iMovie Events and iMovie Projects folders for a file called "UpdatedToiMovie10" and delete it from each folder. (In my case, I deleted these files from any drive that had these folders, not just the internal hard drive.) Restart iMovie 10 and select File > Update Projects and Events... to restart the import process. As long as the new iMovie Library is in the same folder as the old iMovie Projects and iMovie Events folders, this should proceed without a hitch.
If, like me, your old projects and events were stored at least partially on an external hard drive, you should consolidate them onto a single drive. DO NOT do this from the Mac's Finder. Move the projects and events to the drive where you want them by dragging them in iMovie 9's browser. Hold the Command key while dragging to move the files instead of just copying them. (If you copy the files instead of moving them, you'll have duplicates on both drives. It's not a problem, but the files will take up at least twice as much space on your drives.) Once the files are located where you want them, you can quit iMovie 9 and re-attempt the iMovie 10 import process by selecting File > Update Projects and Events...
I hope this helps anyone else having this issue. I also hope that anyone who can see where I've explained this incorrectly will please post a correction as a response.

iMovies are not designed to be viewed in iPhoto. You should watch your movies from iTunes. You can SHARE/To iTunes and your movies will be in iTunes. From iTunes, you can watch them on your Mac, on your Apple TV, or you can sync to iPhone, iPad, iPod. You will also be able to access them through the Media Browser in Keynote, Pages, GarageBand, Logic, and iDVD.
The only movies that should be stored in iPhoto are short, unedited clips taken by a still camera. iMovie can edit them without taking them out of iPhoto.

I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another?

I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another? Any help will be appreciated. Thank you.

This should give you some good insight, I'd probably store them on an External HD on the old machine and then just drag and drop to the new machine.
https://discussions.apple.com/docs/DOC-4141

How to move imovie '08 projects and events from one macbook to another

Hi,
I need to import my movies via firewire, but can only do it through my brother's macbook, as my new macbook does not have firewire.
Therefore, I imported 100 GB worth of movies onto his computer, then transferred the iMovie Events and iMovie Projects folders onto a hard drive, then transferred them from the hard drive to MY macbook. Now they are sitting on the desk top.
How do I get them into iMovie on my macbook, now that I have transferred the files from my brother's macbook onto my macbook's desktop?
Thanks!

I guess I just needed to drag my events into my user folder ---> movie events, and then when I launched iMovie, it found them.

How to restore iMovie 10 events & projects from Time Machine?

Here is the scenario I am facing: I completed some projects and then moved those events & projects to an external HD that subsequently died. The question I have is how can I tap into Time Capsule's history to restore the events and projects I moved out from the internal HD and later lost because the external HD died? All of this happened in Mac OS Mavericks, running iMovie 10, so "my stuff" lives within the "iMovie Library.imovielibrary" file whose content I should not see/modify.
Thank you, eugen

Hello eugen_nw
Open up Finder and navigate to your Movies folder where the library was stored and enter Time Machine and you should see the cascading Finder Windows and you can go back an find the file and then click Restore to bring back the file. Check out the article below and there is a section for restoring files.
Mac Basics: Time Machine backs up your Mac
http://support.apple.com/kb/ht1427
Regards,
-Norm G.

IMovie 11 projects no longer working, preview window is glitched or black, event library not playing imported vids

I am having a lot of trouble with iMovie 11. I bought a new MacBook Pro 15" for the sole purpose of editing surgical videos for work. iMovie 11 was working great initially for me (taking full length surgical video - up to 2 hours) and editing these down to anywhere from 5 to 30 min videos highlighting crucial steps for the surgeries along with transitions, ken burns, etc (with the plan of overlaying narrative voice-over later). I had about 15 of these videos edited sitting in my Project Library and multiple imported videos (dvd to m4v via handbrake then imported via iMovie 11) in my Project Library. Now none of my projects play in the preview window, it's either black or a weird glitchy picture (like messed up pic of my doc or desktop... really weird) and only about 2 of my imported videos play in the project library, otherwise they are just black when I roll over them. My projects are still intact as far as edited clip lengths and transitions, but nothing plays, even in full screen mode. I tried making a new project and the imported video shows in the event library but when I add it to a project it's black (but does play in full screen mode, but impossible to edit this way). I think the audio is actually intact although i'm not positive because these videos don't have any audio (there's some baseline level that fluctuates on the audio bars).
I tried finalizing and exporting a project as an m4v (one that was a combination of two edited imported videos - one of the source imported vids working in the event library and the other not working) and the first half is all glitched up with no surgery video, but the second half is there with the transitions and everything (the half that is working in the event library). This part does not show up when I am trying to edit the project.
fyi - I had deleted some of the videos from my event library to unclutter a little some time ago, the projects were still working after that.
I can find all of my imported videos (in .mov format) that should be working in the event library when I look in the folder:
users/me/movies/iMovie events
If someone could please help me resolve this issue, I would really appreciate it. I put a lot of work and time into these videos and it would be near impossible to start from scratch (which would probably be on some other movie editor like windows movie maker since my iMovie is not working properly even for new projects). I'm hoping this is just some sort of glitch that can be fixed and my projects are still salvagable. I can't remember if this started after I did a system software update or not. This will be a huge dissapointment for me in the Apple platform if I have to scrap my projects because I had just switched over from the PC platform.
I even got Norton antivirus and internet security to make sure I don't have some sort of weird virus.
I have a Feb 2011 15 in MacBook Pro 2.2 Ghz, 4 g RAM, 750 g HD, 1 g vid card. iMovie ver 9.0.4. Lion 10.7.2

Did you by any chance upgrade your Mac OS from version 10.6 (Snow Leopard) to 10.7 (Lion) during the time you were working in iMovie on all these projects?
If not, start by deleting the iMovie Preferences file.
Go to the Desktop
Hold down the Option key and choose the Go Menu > Library
Go to Preferences > com.apple.iMovieApp.plist
Move the .plist file to the trash and restart iMovie
See if the Project files react any differently. Failing that try doing a Repair Disk Permissions:
Restart the Mac, hold down the Option key continuously until 2 hard drive icons appear
Choose the Recovery Volume as your startup disk and let it run until you see the Desktop
Choose Disk Utility from the Recovery Menu
Run Repair Disk Permissions in Disk Utility
Reboot the Mac and when you see the Desktop appear launch iMovie
See if the Project files are the same or different. Next step after this is to one at a time take the Project folders out of users/me/movies/imovie projects. Move one to the desktop and start iMovie. Try skimming the projects that acted up recently. Moving one project at a time might help isolate which project may be causing problems. You can also place project folders back in their original location after doing this testing and iMovie will recognize them on the next relaunch. It won't hurt anything.

How can I burn a copy of my project to a DVD . I do not have IDVD because I have the Lion os. I did purchase Wondershare for burning but it will not load the iMovie events or projects

How can I burn a copy of my project to a DVD . I do not have IDVD because I have the Lion OS. I did purchase Wondershare for burning but it will not load the iMovie events or projects

There is no proper substitute for iDVD.
Why is there no iDVD on my new Mac?
https://discussions.apple.com/docs/DOC-3673
UPDATE & ADDENDUM:
But even though you can still buy iLife 11 that includes iDVD 7 from Amazon, Apple now make it difficult to install:
Poster jhb21939 posted this in another thread:
“when I attempted to load iDVD into a new iMac. A notice came up on the screen stating that the 'Authorisation Licence' had expired on 25 March this year (2012).
I contacted the Apple support team and eventually, I was told that the Licence had been withdrawn and could no longer be used.”
In other words Apple are now so adamant that we don’t use iDVD that they have tried to make it impossible to install.
In response, Old Toad posted this solution:
“You can still use it one all of your Macs. If you get an invalid certificate message just set your Mac's clock to sometime before early 2011 and run the installer. After you're done reset the time back to the correct time.” He added this comment:
“It began after iDVD and iWeb were discontued and they were dropped from the Apple Store. All I can think of is the certificate was set to expire after a certain time period after the intitial iLife disc was released.
I've been able to use the installer even without setting back the date. I just clicked on the Continue button and it would work as expected. For some it would not continue unless the date was set back.”
The latest anorexic iMacs just announced do not even include a CD drive! Proof positive that Apple virtually prohibit the use of DVDs - although the newly announced Mac Minis do include a Superdrive.
Yet, they still include iMovie! Heaven alone knows or understands what you are supposed to do with your newly edited masterpiece - except make a low quality version for YouTube?

My external hard drive holding half my iMovie events and projects has crashed: how do I restore the events from another source?

My external hard drive holding half my iMovie events and projects has become corrupted. I have now downloaded all the same files (from a backup in the cloud) to another hard drive - but iMovie is not "seeing" those events or movies in that external hard drive. Q1 Is there a way of rectifying that? (I.e. telling iMovie to point to the relevant folders or files on the new external hard drive)
Q2 I have a TimeMachine backup of the corrupted drive in another drive which i keep elsewhere. Is it worth me attempting to restore from that backup? And if so where can I restore to (as the original external drive is corrupted) and how do i go about that restore process so that the events and projects re-appear?
thanks in advance for your help. (I thought i would check re Q2 before embarking on the wrong method!)

When I right click on an image, then went to Go to Folder in Library, it pulls up the new external hard drive where I made the new link. When I try to work on the photos, the image still says file image is offline or missing. When I right click on the image to Show in Finder, it says the image could not be used because the original file could not be found. I eventually did click on their locate and found the image. When I linked those two together, a few minutes later ALL the "?" went missing and now IT WORKS!!!!
That was weird!
Hope this helps someone else in my predicament.

I want to back up2 hard drives with imovie events and projects as well as 2 desktops. Is TC the best way to do that

I want to back up 2 hard drives with imovie events and projects as well as 2 desktops. Is TC the best way to do that? Also, I already have a wireless network. Does this create a 2nd one or is it possible to just use it for the backup function?

Time Machine can do that, if your Time Capsule is large enough (see #1 in Time Machine - Frequently Asked Questions).
For backing-up multple HDs on a single Mac, see #32 in that same link.
If by "2 desktops" you mean 2 separate user accounts on the same Mac, see #26 there. If you mean 2 Macs, see #33.
You might also want to review the Time Machine Tutorial.

IMovie Events & Projects

Similar Messages

Maybe you are looking for