IMovie files (v6) corrupted after computer switched off at power button

I had two iMovie files open when my computer froze. I had previously successfully dropped both of these files into the auto-play box in iDVD's Map View (so that I could avoid using "themes" in iDVD — a tip I read at this site). When the computer froze (with the screen appearing completely fragmented with multiple colours during a play back in DVD Player of a DVD I'd burned of this same project), I had to switch the computer off at the power button, and since this happened iDVD will not allow these same two iMovie files to be dropped into the auto-play box in iDVD map view. I then tried dropping older movies into the auto-play box, and I've also created a new smaller 'test' movie to drop into the auto-play box and all worked OK. So it appears that the iMovie files that were 'open' at the time the computer had to be switched off are now corrupted. I can play them and edit them, but can't get them into iDVD the way I could before.
Does anyone know if these files can be repaired (easily)?
Would appreciate any help, thanks.
Cheers,
Lehla

Hi,
This seems to be a hardware issue with the printer consider replacing printer
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

A black see through screen slides down from the top of the Mac and tells me to switch off using power button. Nothing works other than just that. I run sophos up to date and use Safari. Everything is up to date. My Mac is a 21" and is three years old.

As per title. Twice in a few hours. Happened each time when my BT router defaulted to plain public wi-fi and while I waited for airport to locate my router hub I just ticked my hub and boom this dark almost black see through screen slid down and instructed me to switch off using power button. It is a 3 year old desktop 21" and has been faultless until this. I get the default report an unexpected shutdown form and when I fire up it is fine as indeed it is now.
Any help or ideas how to deal with?

That is a kernel panic.
What is a Kernel Panic?
http://support.apple.com/kb/TS3742
and http://support.apple.com/kb/TS1892?viewlocale=en_US
http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
More details here:
http://www.thexlab.com/faqs/kernelpanics.html
Useful articles on how to avoid and eliminate kernel panics here:
http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir
http://www.macworld.com/article/2027201/how-to-troubleshoot-a-kernel-panic.html# tk.nl_mwhelp

Q10 switches off when power button pushed once and gets stuck in boot up loop

Hi All
All of a sudden my Q10 power button has become sensitive and restarts when pushed once. When it tries to restart it gets stuck in the boot loop - going from red light to BlackBerry logo, back to red light.... If I push the power button a few times it will boot up.
I have tried to reload the most actual 10.3 software but problem still exists.
Any ideas? Oh and its JUST gone out of warranty.....
Is it a power button issue or something more serious?

Sounds like button. I'm assuming that is one way they can fail. I don't know for sure. What I usually read about button problems is the button doesn't work at all.
The issues could with the 10.3.1 upgrade complicates guesswork. How did you reload the OS? If you did a clean install with an autoloader then I would say you did what you could do to rule out software.
- Ira

HT1766 My Iphone 4s dont open up after i switched off it. when i open it it is stuck in the apple logo mode. I cannot switch it on again. is their any way to backup my photos since i cannot switch on my phone?

My iphone 4s dont open up after I switch off it. When I click the switch on button it blinks the apple logo in the black background. Is there anyway that i can backup my photos since I cannot open my phone?

Hello Ganewee,
Thank you for posting in the Apple Support Communities. It is certainly impossible to use your iPhone if it won't power on. I found some steps that can help with an issue like this:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
If you get to step 6 where you have to restore your iPhone and your iPhone is recognized in iTunes, I would try backing it up before going through the restore. You can find steps to backup your iPhone here:
iOS: How to back up
http://support.apple.com/kb/HT1766
I hope this helps!
Best,
Sheila M.

File Adapter BPEL Process getting switched off

The file adapter BPEL process reads a csv file which has a series of records in itfrom /xfer/chroot/data/aramex/accountUpdate/files. In between reading the files, the BPEL process gets switched off. The below snippet is the error we found in the domain.log. Anybody can you please suggest what to do?
<2010-11-25 16:22:28,025> <WARN> <PreActivation.collaxa.cube.ws> <File Adapter::Outbound>
java.io.FileNotFoundException: /xfer/chroot/data/aramex/accountUpdate/files/VFQ-251120101_1000.csv (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.tip.adapter.file.FileUtil.copyFile(FileUtil.java:947)
at oracle.tip.adapter.file.inbound.ProcessWork.defaultArchive(ProcessWork.java:2341)
at oracle.tip.adapter.file.inbound.ProcessWork.doneProcessing(ProcessWork.java:614)
at oracle.tip.adapter.file.inbound.ProcessWork.processMessages(ProcessWork.java:445)
at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:227)
at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:280)
at java.lang.Thread.run(Thread.java:619)
<2010-11-25 16:22:28,025> <INFO> <PreActivation.collaxa.cube.ws> <File Adapter::Outbound> Processer thread calling onFatalError with exception /xfer/chroot/data/aramex/accountUpdate/files/VFQ-251120101_1000.csv (No such file or directory)
<2010-11-25 16:22:28,025> <FATAL> <PreActivation.collaxa.cube.activation> <AdapterFramework::Inbound> [Read_ptt::Read(root)]Resource Adapter requested Process shutdown!
<2010-11-25 16:22:28,025> <INFO> <PreActivation.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - performing endpointDeactivation for portType=Read_ptt, operation=Read
<2010-11-25 16:22:28,025> <INFO> <PreActivation.collaxa.cube.ws> <File Adapter::Outbound> Endpoint De-activation called in adapter for endpoint : /xfer/chroot/data/aramex/accountUpdate/files/
<2010-11-25 16:22:28,095> <WARN> <PreActivation.collaxa.cube.ws> <File Adapter::Outbound> ProcessWork::Delete failed, the operation will be retried for max of [2] times
<2010-11-25 16:22:28,095> <WARN> <PreActivation.collaxa.cube.ws> <File Adapter::Outbound>
ORABPEL-11042
File deletion failed.
File : /xfer/chroot/data/aramex/accountUpdate/files/VFQ-251120101_1000.csv as it does not exist. could not be deleted.
Delete the file and restart server. Contact oracle support if error is not fixable.
at oracle.tip.adapter.file.FileUtil.deleteFile(FileUtil.java:279)
at oracle.tip.adapter.file.FileUtil.deleteFile(FileUtil.java:177)
at oracle.tip.adapter.file.FileAgent.deleteFile(FileAgent.java:223)
at oracle.tip.adapter.file.inbound.FileSource.deleteFile(FileSource.java:245)
at oracle.tip.adapter.file.inbound.ProcessWork.doneProcessing(ProcessWork.java:655)
at oracle.tip.adapter.file.inbound.ProcessWork.processMessages(ProcessWork.java:445)
at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:227)
at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:280)
at java.lang.Thread.run(Thread.java:619)
<2010-11-25 16:22:28,315> <ERROR> <PreActivation.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "cube delivery": Process state off.
The process class "BulkAccountUpdateFileConsumer" (revision "1.0" ) has not been turned on. No operations on the process or any instances belonging to the process may be performed if the process is off.
Please consult your administrator if this process has been turned off inadvertently.

This patch is not for 10.1.3.1.
I have provided a response to on the following post
BPEL Process Going into Dead State Automatically.
cheers
James

Computer switches off while uploading

I have been making some changes to
http://www.lerosdiving.com/diving_pics.htm
and the template.
When I went to upload the pages 3 minutes in, the computer
made a humming
noise for a moment and then switched off (WinXP Prof, DW8 no
updates).
I restarted, tried again, same thing. Restarted, left the
computer running,
ran virus checker (AntiVir) with no adverse results and
uploaded images 3 at
at time (ftp via DW). PVII IGM btw. No problem at all. Tried
uploading
thumbnails folder, computer switched off.
I uploaded the whole of the site a bit at a time with no
errors or problems
this way.
Nothing else seems to be causing the PC to switch off in this
way. Does
anybody have the remotest idea what might be causing this?
[Two things: the PC does seem to have been running somewhat
slowly over the
last couple of days but obviously may have no bearing on the
issue.
Secondly, there was a power cut which trashed my usb drivers
yesterday
including hub (no mouse/keyboard, had to use adapter). I
uninstalled and
reinstalled them and all seemed fine ]
Jo

Thanks Ian, I do indeed have an AMD processor. It's sitting
here without a
cover at the mo (PC) as I haven't had a chance to clean it
out yet. Son
visiting from UK, friends arriving tomorrow - aargh! when oh
when...
Jo
"Ian" <[email protected]> wrote in message
news:[email protected]...
> Try using task manager and see how much processor usage
you are making.
> Also what processor are you running? Some of the AMD
units are known for
> running very hot when under load. If in doubt fit a new
processor fan and
> see what happens
>
> cheers
>
> Ian
> "Josie1one" <joleros[nospam]@yahoo.com> wrote in
message
> news:[email protected]...
>> Thank you all so much for your comprehensive replies
- I really
>> appreciate it.
>> Tomorrow I am going to do everything you all
suggested - starting with a
>> thorough spring-clean, dust-buster, defrag, the lot.
>> Back in the 70s when I started working with
computers, we worked in a
>> completely dust-free environment, false ceilings and
floors. Amazing - my
>> poor little computer!
>> Thanks again.
>> Jo
>>
>> "Josie1one" <joleros[nospam]@yahoo.com> wrote
in message
>> news:[email protected]...
>>>I have been making some changes to
>>>
http://www.lerosdiving.com/diving_pics.htm
and the template.
>>> When I went to upload the pages 3 minutes in,
the computer made a
>>> humming noise for a moment and then switched off
(WinXP Prof, DW8 no
>>> updates).
>>> I restarted, tried again, same thing. Restarted,
left the computer
>>> running, ran virus checker (AntiVir) with no
adverse results and
>>> uploaded images 3 at at time (ftp via DW). PVII
IGM btw. No problem at
>>> all. Tried uploading thumbnails folder, computer
switched off.
>>> I uploaded the whole of the site a bit at a time
with no errors or
>>> problems this way.
>>> Nothing else seems to be causing the PC to
switch off in this way. Does
>>> anybody have the remotest idea what might be
causing this?
>>> [Two things: the PC does seem to have been
running somewhat slowly over
>>> the last couple of days but obviously may have
no bearing on the issue.
>>> Secondly, there was a power cut which trashed my
usb drivers yesterday
>>> including hub (no mouse/keyboard, had to use
adapter). I uninstalled and
>>> reinstalled them and all seemed fine ]
>>> Jo
>>>
>>>
>>
>>
>
>

I am using iPhone 5 & 4S with iOS 7.02. May I ask how can my preset alarm ring after I switched off completely my iPhone & how to solve it? Thank u!!

I am using iPhone 5 & 4S with iOS 7.02. May I ask how can my preset alarm ring after I switched off completely my iPhone & how to solve it? Thank u!!

http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
user guide

I lost all my notes after having switched off in icloud: how to recover them from a back up pls ?

I lost all my notes after having switched off in icloud: how to recover them from a back up pls ?

Just turn notes syncing back on again.

When I try and open Quicktime the computer switches off and reboots. Help!!

I have been converting DVDs to MP4 to play on my new IPod Video. When I click on import in ITunes the computer switches off and reboots. I have reinstalled Quicktime but this has made no difference. I tried opening Quicktime and I had the same result. Any help would be appreciated.
Windows XP

Thanks for the quick reply. The computer reboots even when I only open Quicktime without running an MPEG4. I think the problem is with Quicktime but have no idea what it is.

Files get corrupted after import-export

Hi
After exporting images from HTML DB 2.0 and importing them some of the files are corrupted after import.
This has happened with one .js file and with one .pdf file.
All the other (including some PDF-s) are correct.
The "File Character Set" specified on import is correct and there are no other parameters I can change.
If I look the contents of corrupted files it seems that another file has been pasted at the end of the original file.
What could be wrong?

Hello,
Any news on this ? I have the same (reproducable) problem with a .js file.
Uploading works fine, but when I try to download it again, the contents of another file seems to have been appended at the end. The file also doesn't work when I try to include it using #WORKSPACE_IMAGES#...js
Matthias

Hi. I have downloaded iOS7.1.2 but for installation, it requires power suply. I connected to power suply, but before completion of update installation, I switched off the power plug, and go out of wifi area. Now it has been stoped. My Iphone4 is hang

Hi. I have downloaded iOS7.1.2 but for installation, it requires power suply. I connected to power suply, but before completion of update installation, I switched off the power plug, and go out of wifi area. Now it has been stoped. My Iphone4 is hanged. Help me

Plug it into your computer and restore it using iTunes.

I'm using a macbook pro 2011 15",while i was charging it,i accidentally switched off the power supply while it is half way charging,will the battery get damaged if charging got interupted and switched on and off?

i'm using a macbook pro 2011 15",while i was charging it,i accidentally switched off the power supply while it is half way charging,will the battery get damaged if charging got interupted and switched on and off?

you are welcome

While downloading icloud my ipad locked up at the agree screen any ideas how to unlock .it will not turn off with power button

my ipad is locked up since downloading icloud. icannot turn it off with power button.

That makes sense after re-reading the original question. I thought the OP was setting up for the first time. I must be getting old... I have misinterpreted a few questions over the past few days....Or my brain is on hiatus!

I have a MacBook Pro 13.3 OS- MAC OS X LION.Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.

I have a MacBook Pro 13.3 OS- MAC OS X LION.
Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.
I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.
Thank you for any help in this regard that comes fast.

The details of the kernel-panic report is as follows-
Interval Since Last Panic Report: 1458653 sec
Panics Since Last Report:          6
Anonymous UUID:                    70BA6A**************************************************
Sun Sep 16 23:00:13 2012
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff8000290560, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000800028, CR3: 0x000000000a509005, CR4: 0x00000000001606e0
RAX: 0x0000000000000001, RBX: 0x0000000000820000, RCX: 0xffffff801122dc40, RDX: 0x0000000000020501
RSP: 0xffffff80ef3d3da0, RBP: 0xffffff80ef3d3dc0, RSI: 0x000000002b1d78b6, RDI: 0xffffff800342d280
R8: 0xffffff80ef3d3f08, R9: 0xffffff80ef3d3ef8, R10: 0x000000010d901000, R11: 0x0000000000000206
R12: 0xffffff800342d280, R13: 0x0000000000000000, R14: 0xffffff8011cd6500, R15: 0x0000000000800000
RFL: 0x0000000000010206, RIP: 0xffffff8000290560, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x0000000000800028, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80ef3d3a50 : 0xffffff8000220792
0xffffff80ef3d3ad0 : 0xffffff80002c4794
0xffffff80ef3d3c80 : 0xffffff80002da55d
0xffffff80ef3d3ca0 : 0xffffff8000290560
0xffffff80ef3d3dc0 : 0xffffff800026c9c3
0xffffff80ef3d3f40 : 0xffffff80002c3fbb
0xffffff80ef3d3fb0 : 0xffffff80002da481
BSD process name corresponding to current thread: fsck_hfs
Mac OS version:
11E2620
Kernel version:
Darwin Kernel Version 11.4.2: Wed May 30 20:13:51 PDT 2012; root:xnu-1699.31.2~1/RELEASE_X86_64
Kernel UUID: 25EC645A-8793-3201-8D0A-23EA280EC755
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 4850001132
last loaded kext at 1796984176: com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.7f2 (addr 0xffffff7f80e16000, size 57344)
loaded kexts:
com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.7f2
com.apple.driver.AppleUSBTCButtons    227.6
com.apple.driver.AppleUSBTCKeyEventDriver    227.6
com.apple.driver.AppleUSBTCKeyboard    227.6
com.apple.driver.AppleIRController    312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.iokit.SCSITaskUserClient    3.2.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCISerialATAPI    2.0.3
com.apple.iokit.IOAHCIBlockStorage    2.0.4
com.apple.driver.AppleFWOHCI    4.8.9
com.apple.driver.AirPort.Brcm4331    560.7.21
com.apple.driver.AppleSDXC    1.2.2
com.apple.driver.AppleUSBHub    5.0.8
com.apple.iokit.AppleBCM5701Ethernet    3.2.4b8
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleAHCIPort    2.3.0
com.apple.driver.AppleUSBEHCI    5.0.7
com.apple.driver.AppleUSBXHCI    1.0.7
com.apple.driver.AppleACPIButtons    1.5
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.5
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1.3
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
com.apple.driver.AppleUSBBluetoothHCIController    4.0.7f2
com.apple.iokit.IOBluetoothFamily    4.0.7f2
com.apple.driver.AppleFileSystemDriver    13
com.apple.driver.AppleUSBMultitouch    230.5
com.apple.driver.AppleThunderboltDPInAdapter    1.8.4
com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.4
com.apple.driver.AppleThunderboltPCIDownAdapter    1.2.5
com.apple.iokit.IOUSBHIDDriver    5.0.0
com.apple.driver.AppleUSBMergeNub    5.0.7
com.apple.driver.AppleUSBComposite    5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.driver.AppleThunderboltNHI    1.6.0
com.apple.iokit.IOThunderboltFamily    2.0.3
com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
com.apple.iokit.IOFireWireFamily    4.4.5
com.apple.iokit.IO80211Family    420.3
com.apple.iokit.IOEthernetAVBController    1.0.1b1
com.apple.iokit.IONetworkingFamily    2.1
com.apple.iokit.IOUSBUserClient    5.0.0
com.apple.iokit.IOAHCIFamily    2.0.8
com.apple.iokit.IOUSBFamily    5.0.8
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    177.5
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    331.7
com.apple.iokit.IOStorageFamily    1.7.2
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.5
com.apple.iokit.IOPCIFamily    2.7
com.apple.iokit.IOACPIFamily    1.4

How do I turn off the Power button Lockout on my HPw1858 monitor?

How do I turn off the Power button lockout on my HPw1858 monitor?
This question was solved.
View Solution.

Hi,
Power Button Lockout is displayed.
The monitor's Power Button Lockout function is enabled.
Press and hold the Power button for 10 seconds to unlock the Power button function.
If the above doesn't work then try a monitor reset. Unplug the monitor’s power cord and hold down the monitor’s power button for 30-60 seconds. Plug the monitor back in and power it up.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

IMovie files (v6) corrupted after computer switched off at power button

Similar Messages

Maybe you are looking for