IMovie for iPad 3 does not see my camera roll anymore

In iMovie when I tap the photo or video icons it does see my camera roll anymore.

Go to Settings - Privacy - Photos. My guess is that you do not have iMovie switched "On"

Similar Messages

I have had no previous problem downloading iPhone pict to my Mac, but now, although the Mac sees the iPhone, iPhoto does not see the camera roll. Any ideas?

I have had no previous problem downloading iPhone pict to my Mac, but now, although the Mac sees the iPhone, iPhoto does not see the camera roll. Any ideas?

Repair your disk permission: http://bit.ly/OeD7U3.
Run Cleanup tool http://bit.ly/vnukXY
Download updated driver from Lexmark website www.lexmark.com
Run firmware update http://bit.ly/AcNqbg
Reset printing system http://support.apple.com/kb/HT1341

I am trying to import i frame from an SD90 video camera to iMovie, but it does not see the camera. Footage goes to i photo Why?

I am trying to import video ( i frame) from an sd90 ( listed for mac) but i movie does not see the camera. It imports into i photo. Is this normal ?

If you quit iPhoto and iMovie (with the camera still attached) then put the camera into VCR playback mode. Then launch iMovie and see if it can see the camera. If not, get out the power adapter for the camera and plug it into the wall, plug the camera into the power adapter. Reboot your Mac and wait for iPhoto to launch again automatically. Don't let it import the clips, just say No, quit the program. Then put the camrea int VCR/Playback mode, launch iMovie and check again to see if it can see the camera. Once iMovie sees it the first time it should be quicker to recognize it in future. But iPhoto does try to race in there and grab everything first.
To turn this off go to iPhoto Menu in iPhoto > Preferences > Look for Connecting camera opens: (click on the pulldown menu and choose No Application) This effectively turns off iPhoto when you first attach the camera. And it opens the way to iMovie recognizing it quicker.

HT4101 I have a NIKON COOLPIX P500 but am unable to download photos through the IPad camera connection kit. I have tried to use the Sandisk card also - no result. Any suggestions? The Ipad does not "see" the card or camera?

I have a Nikon Coolpix P500 but am unable to download photos from it to my iPad2 via the iPad Camera Connection kit. The iPad does not see either the Sandisk 8GB card or the Nikon camera. I have turned the camera on, but it seems that the camera just want to recharge its battery through the iPad as the iPad states that the devices draws too much power?? Anybodu solved this problem yet? Advise please?

One thing to check is the format that the camera is saving pics to the card in. Many are selectable and, in most cases, if PTP is one of the options then you need to have that one selected for the files to be visible to iOS and the CCK (connection kit).
Another thing which sometimes comes up, especially with older cameras and therefore probably not with yours, is the filenaming conventions used by the camera. iOS is quite strict about what it expects to see and if files are being stored with unsupported name formats then they simply won't be seen at all.

I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good.

I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good. Has something changed? Thanks!

If neither iPhoto not IC can seethe card it might suggest an issue with the card or the ports on the camera/mac.
Try reformat the card, change the ports and/or use a USB Card Reader.

IPhoto does not see my camera

iPhoto '09 did see my new Panasonic camera at first, and I could import the images and videos without any issues.
Now - a day later - there is some images and movies on my camera's SDHC card, and it does not see the camera at all. I do see the camera card in the finder. So the card is readable. It is just that all of sudden iPhoto does not see it anymore. I tried hence and forth restarting iPhoto and camera but no luck.
The only thing I did in between was loading of a bunch of images from my camera card (via Camera Connector Kit) to my iPad 3. And removing the images (the iPad 3 does not seem to recognize the videos - which is another issue...) via the Photo app on iPad. I then wanted to load the videos (and some new images I tookl direcfly to iPhoto on my iMac. But htat now does not seem to work.
Any tips are much appreciated!

Try these:
1) Go to Disk Utilities and repair permission -- see if it works. If not go to #2
2) If that doesn't work d/l a program call OnyX. Make sure you get the the specific version for the version of OS X you are running. Run the program and go to Maintenance and run all three options Permissions (reset home directory checked), Scripts (run all, but don't delete logs), and rebuild (check LaunchServices and dyld's shared cache). Then go to Cleaning. In System check Kernal and Extentions and Other components. In User make sure at least Applications and Temporary items are checked. You can check the others if you want - no harm will come, just more time. You will be asked to restart your computer each time, but ignore until you have reached this point. When you have done all of the above reboot
Test again. Your camera shoud show up.

IPhoto does not see the camera

iPhoto does not see the camera, although it worked really well for two years. Computer has been regularly updated. Please help, thank You.

Image Capture doesn't see the camera. I have tried with two different Sony cameras, that I have been using for a long time on this computer. It is iMac 27''. Both of these cameras work normaly in MacBook Air, that means that the problem is not in the camera, or the cards. Those are the things I have tried so far. Only difference I created on the computer is that I have, two or three days ago, installed external hard drive WD My Book Studio which is connected to the computer by FireWire 800.

Hi I am unsuccessful in pairing my iPad 3 with my friend'sGT 19070 phone. Her phone says we are paired but my iPad does not see the pair; it says it is unsupported. Any suggestions?

Hi I am unsuccessful in pairing my iPad 3 with my friend'sGT 19070 phone. Her phone says we are paired but my iPad does not see the pair; it says it is unsupported. Any suggestions?

The iPad message is correct, it is unsupported. You cannot pair your iPad with your friends phone. Bluetooth on the iPad is designed for the use of headphones, keyboards, speakers and some peer to peer gaming.

Ipad does not see airprint priner (HP 2545 all in one ink advantage) despite they are in the same wifi network.

I ve got Ipad 7.1.1 and use airprint printer HP deskjet 2545 ink advantage all in one series which is airprint. Ipad does not see it despite it is in the same wifi network. I have test it through printer. direct printing is available since Ipad finds printer while searching networks? I have allready turn off and restart everthing, reinstalled printer to my laptop to ckeck connection to wifi network, but still ipad cannot see airprint!!what can possilby be happening?

1. Turn the router, iPad and printer off
2. Turn on the router and then wait 30 seconds
3. Turn on printer and then wait 30 seconds
4. Turn on your iPad and test print.

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem)

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks

sgetraer wrote:
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks
1. Because it is either the same IP as the new one or hidden by being plugged in as a second router.
To access it, isolate one computer from the existing network and plug it directly by ethernet to a lan port of the TC. Use the erase function in the TC to remove all the content of the hard disk.
Then go to the internet tab, connection sharing and select off bridged. You can then reconnect the TC to the network.. and the computer as well. The TC will act as bridged device.. getting IP from the main router and should then appear correctly in Airport utility.
2. I covered in 1. But you just go in airport utility manual setup. disk, and you will see the erase function. You can also set it to bridge and leave the erase until you put it back in the network.. but be careful you erase the right one.
3. You can use the old TC via wired or wireless.. although I would always stick to wired connection if possible. Speed on wireless is 10x worse than wired.
Also note the reliability goes down dramatically after 2 years.. a series 1 3 years old or more is ebay fodder unless you want to repair it. Do not trust vital data to it.. when it dies you will have issues recovering it.
4. Yes, all apple routers will function as wireless extenders. when you do that the ethernet ports turn off so it becomes a purely wireless device.. strange apple decision on what you want to use your TC for.

Capture mode does not see external camera

When I use the capture in iMovie, it only allows you to choose the built in iSight camera, and the external web cam is long listed as a choice. The external works fine in other programs (like skype).
Is iMovie intentionally crippled to only work with iSight in capture mode? Or am I doing something wrong?
THanks
bob

Thanks for your help...
It is a Logitech Quickcam Pro 9000 using drivers from mac.
It does show up in USB section under apple system profiler.
It is connected through a powered hub (I have tried it directly connected with no difference).
It is recognized fine in other programs, such as Skype (you can change from isight to external web cam).
I downloaded and installed iGlasses 2, but that did not solve the problem. Curiously, if memory serves me correctly, photobooth only works with isight internal, but after iGlasses 2 install, it works (only) with external (when external is available).
Any other ideas on why iMovie does not see the external web cam?
bob

Since Yosemite my Macbook 11inch mid 2011 does not see second thunderbolt display anymore. My MacBookPro 13inch Early 2013 works fine, but it swaps the screens after an (re)boot

Since Yosemite my Macbook 11inch mid 2011 (supports Thunderbolt) does not see the second thunderbolt display anymore.
My MacBookPro 13inch Early 2013 works fine, but it swaps the screens after an (re)boot.
Does anyone else experience these problems and/or have solutions

Hello ROBLAHAY,
I'm sorry to hear you are having this issue with your MacBook Air. I also apologize, I'm a bit unclear on the exact configuration you are describing. If you are talking about using two external Thunderbolt displays (in addition to the internal display) with your Mid 2011 MacBook Air 11-inch, you may want to be aware that only a single external Thunderbolt display is supported on that model, as noted in the following article:
3. How many Apple Thunderbolt Displays can I use with my Mac in OS X?
The table below indicates how many Thunderbolt displays can be connected to Thunderbolt-capable Mac computers in OS X.
Computer
Maximum connected displays
Thunderbolt-capable Macs with Intel HD Graphics 3000 integrated graphics can support one connected Apple Thunderbolt Display (27-inch).
MacBook Air (Mid 2011)
MacBook Pro (13-inch, Early 2011) and (13-inch, Late 2011)1
Mac mini (Mid 2011), 2.3 GHz
Mac mini with Lion Server (Mid 2011)
One Thunderbolt display
Thunderbolt ports and displays: Frequently asked questions (FAQ) - Apple Support
If you are using just a single external display and still having issues, you may find the troubleshooting steps outlined in the this article helpful:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Sincerely,
- Brenden

IMovie does not see my camera

iMovie will not recognize my camera. My camera is a Sony DCR-SR47.
When I select Import from camera, I only see my facetime camera. I tried unplugging cables, restarting camera, changing cables, restarting iMovie and restarting the computer.
It seems pretty straightforward, but ... no camera shows up.

According to http://help.apple.com/imovie/cameras/en/index.html?lang=en_US your camcorder is supported by iMovie '11 (Version 9).
But, according to http://help.apple.com/imovie/10/cameras/en/index.html?lang=en_US it is not supported by iMovie '13 (Version 10)
The reason is Apple has dropped support for some of the older codecs.
So I infer you are using iMovie 10? All is not lost, but you will have to copy the files from you camera to hard disk with Finder and then transcde them into a format that iMovie 10 accepts. The article:
http://lauralily10.tumblr.com/post/68120460685/mpg-imovie-mac-how-do-i-import-a- mpg-file-into-imovie
should help here.
There are a number 3rd party apps, some free, that will do the transcoding in fact Quicktime 10 may be the easiest since it converts old codecs before playing and you can save the converted files
Geoff.

IPad does not regonize the camera kit

I have ordered the camera connection kit for my ipad 2. The camera connection kit with the usb connection does not regonize the ipad. I get the follow sense on my ipadscreen: this accesoire is not suitable for my ipad. Does anyone also have got this sense??

Hello, The problem is solved. the kit does not do it also on other ipads. i got an orther one from the store. greatings Bertoes

Wlan synch for iPad does not work

Hi
Has anybody any idea how to solve my problem:
WLAN synch is actitived for both my iPhone and my iPad, it is activated via iTunes and appears to be switched on on both devices. When I open iTunes (latest version of course) it does immediately recongize te iPhone and starts to synch, it does not anymore recognize the iPad.
I have tried many things, made sure the the same itunes account (of my two) is activated, I have checked that the device is active (i.e. not locked), checked and compared settings ... no idea where the problem my may be.
When I then attach the iPad to the MBP then it works, I can even disconnect the cable and synch continues.
When I shut down the MBP, the next time I have the same problem again ...
ITunes even synchs with my iPhone, when it is NOZ connected to power, but it does not want to recongize the iPad.
And going to the settings on the iPad doesn't help either: when I go to WLAN synch I can press "synch now", then it starts to search my MBP but it seems not to find it and then stops after some time.
Any help is appreciated.
Best regards
Diethard

Are you putting the head set into discovery mode before you try pairing it to the iPad?

IMovie for iPad 3 does not see my camera roll anymore

Similar Messages

Maybe you are looking for