IMovie for iPhone 4 app not recognizing imported videos to iPhone

Hello! I took a video from my iphone 4 sometime back and I imported it to my computer. Later after upgrading my iPhone to iOS 5.1 I installed iMovie app (latest version) and I imported the same video to Videos app through iTunes. I found that Videos app recognized the video and playback was fine. Then when I opened iMovie app, it dosent show any video in the import video screen when I tried to import it to iMovie app. But still Videos app shows the video where iMovie does not. So how can I make iMovie app recognize videos imported to iPhone? Any help and answer would be appreciated

I put the video file in the sync folder for Photos app and I ticked "Include videos" and synced. I found the video tile on the Photos app and as I opened it, it showed an image of the video instead of the video (as if the video was converted to a picture which shows the starting part of the video). And below the screen was play slideshow tab. Seems the video appeared as an image. Anything else I can do to fix this problem?

Similar Messages

  • Am not able to import videos to imovies, as am able to view the videos in iphone but not able to import in imovies .Pls help

    Am not able to import videos to imovies, as am able to view the videos in iphone but not able to import in imovies .Pls help

    Hello Ephremekka
    Start your troubleshooting with the article below to get your iPod Classic to show up in iTunes to be restored.
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Regards,
    -Norm G.

  • IMovie '08 7.1.4 is not recognizing my new Verizon iPhone

    My iMovie '08 7.1.4 is not recognizing my new Verizon iPhone. How can I get iMovie '08 to recognize my Verizon iPhone so I can import the videos of my kids from there.

    You might consider upgrading to iMovie 11. It would cost about $15.
    For iMovie 08, I would try to import the movies into iPhoto. Then you can access them in iMovie through the iPhoto Event.

  • TS1538 my iphone device not recognized in iTunes for my new Windows 8 computer

    my iphone device not recognized in iTunes for my new Windows 8 computer

    Hello kwesiaddai,
    I understand that your iPhone 5 is not recognized by iTunes. The following article may help to resolve your issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • Do not import video from iPhon 4s in iPhoto 9.4.3 (720.91)

    Do not import video from iPhon 4s(6.1.3(10B329)) in iPhoto 9.4.3 (720.91) on my iMac(iMac 27"_Intel Core i5 2,8 GHz_RAM 4 GB_HDD 3Tb_ATI Radeon HD 5750 1Gb_Mac Os 10.8.4)
    "unreadable files.
    Could not import because did not recognize the file format"

    Presumably you mean 'Does not...'?
    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?
    Post back with the result.

  • Hi! I've been using Goldmine contact management software for many years and syncing with Companion Link successfully, then ITunes to the IPhone. Suddenly, my IPhone is not recognized and won't sync. I see a message telling me to dock the phone? Any ideas?

    Hi! I've been using Goldmine contact management software for many years and syncing with Companion Link successfully, then ITunes to the IPhone. Suddenly, my IPhone is not recognized and won't sync. I see a message telling me to dock the phone? Any ideas? Thanks for any assist!

    Hi Ken,
    Dennis here from westport. I too am a goldmine user for many years and would love to know how you sync.
    I am looking at a product called wmobile, but may be problematic on my current system.
    thanks for any help...

  • HT201302 iphone is not recognized as an accessible device by your windows 7 or 8 pc?

    Despite the fact that itunes has no problems accessing the iphone nor does a 3rd party paid app like "iExplorer", the iphone is not recognized as a device by Windows (7 and 8). The support bulletin referenced is inadequate.

    Hi James,
       I'll give you steps so it'll be easy to read.
    I suggest having your phone plugged into a working USB during this process.
      1. Open up your Device Manager (run/use command line devmgmt.msc or look for it by sliding open your charm bar located on the right of your computer screen, selecting PC Info, and then on the left hand side of your PC Info window, click "Device Manager"
    2. Once you are in your device manager, look at the above tab (It should say File, Action, View, and Help) and Click View. Click "Show Hidden Devices"
    3. Look for "Portable Devices", and click it. There should be something similar or exact to "Apple iPhone".
    4. Right click it, and select "Update Driver Software..."
    5. Click "Browse my computer for driver software"
    6. Click "Let me pick from a list of device drivers on my computer"
    7. Click "Show All Drivers", then click "Next"
    8. Click "Have Disk"
    9. Type in C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    10. Click "Browse", there should be a file that says "usbaapl64" RIGHT click it and click "Install"
    11. From there it should install. Open iTunes to make sure.
    Please let me know if my directions are not clear enough, it took me some time to figure out what I was doing myself. I wish you the best!

  • IPhone 5 not recognized by iTunes 12

    Hello all,
    I have an iPhone 5, I'm running iTunes 12.0.1.26 and Yosemite (OS X 10.10.1). Over the last few days, I've noticed that my iPhone is not recognized by iTunes or even Yosemite itself. I have already tried everything in this doc: iOS: Device not recognized in iTunes for OS X - Apple Support, to no avail. I've been combing the communities and Google to no avail. Does this mean I need to try a manual restore on the phone? Any other solutions?
    Thanks
    Gina

    I was able to uninstall and reinstrall iTunes, but my Iphone does not appear in iTunes, nor in Windows Explorer on my Windows 7 desktop. But it does appear in both iTunes and Windows Explorer on my laptop which runs Windows 8... How can I get it reconginzed on my desktop?

  • My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please ad

    My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please advise

    Try Andrei Cerbu's post here, JF Fourie's post here, or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update. See also TS1363: iPod: Appears in Windows but not in iTunes.
    tt2

  • Pages for iPad is not recognizing the password I assigned to a document.  I included a hint, and I know I am entering the password that goes with the hint.  Is there anything I can do to access my doc?

    Pages for iPad is not recognizing the password I assigned to a document.  I included a hint, and I know I am entering the password associated with the hint.  Is there anything I can do to access my document?  i quite the Pages app and restarted it.  Now I guess I'll reset the iPad and see if that helps.   Thanks!

    Rhonda Fogel wrote:
    Interesting that one does not need the password to delete using Finder.
    The Pages password protects the contents of the document.  If there were a Finder password, it would protect what you might think of as the "file wrapper" ... the stuff around the file content.
    Glad it's not vital.  I have to say I only pasword protect those Pages documents that are, in fact, vital.
    Best of luck.

  • Iphone 4 not recognized and will not sync after latest itunes update.  I have done all trouble shooting and uninstalled and reinstalled itunes to no avail.

    iphone 4 not recognized and will not sync after latest itunes update.  I have done recommendedl trouble shooting and uninstalled and reinstalled itunes to no avail. Can I go back to earlier version of itunes or restore computer to fix?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Desperate...Premiere not recognizing any video

    Hi everyone!  I'm obviously very desperate if I'm posting to a forum for help. 
    The problem is my clips won't show in the timeline. When I drag and drop the video file, every single thing I've read online states that it should AUTOMATICALLY separate my video into clips for editing, and an audio track. It should read "Video 1", "Video 2," "Audio 1", etc. In the default setting, before a video is added to the timeline, it reads "Narration" and "Soundtrack." But, as I said, when I drag and drop a video it is supposed to automatically change. Even YouTube tutorials have shown this.
    Well...mine doesn't.
    When I drag and drop a video, not only does it NOT separate the video and audio, but it doesn't even separate it into clips. The words "Narration" and "Soundtrack" remain on the left side, where it's supposed to read "video" and "audio." So it's as if the program is not recognizing my video file.
    Fine, so I tried another video file. One of those sample ones that were already on the computer. No dice, it still did the same thing.
    So I'm at an impasse. No help sites or anything I've found have addressed the problem of the program just NOT WORKING like it's supposed to! And I know exactly what it's supposed to look like, because it's not that dissimilar from Windows Movie Maker which I have used before.
    Any help would be greatly appreciated.

    It's not from a camcorder, it's an .avi file directly from my hard drive.  Saved on my desktop, no less.
    Two things here:
    AVI is but a wrapper, and so very much can be inside that wrapper. See this ARTICLE for some background, and also tips on how to peek inside that wrapper.
    Second, I would not use the Desktop for your Assets. It is basically a special folder and one with special properties. Often, PrE (and many other programs) will have difficulty accessing the Desktop folder, due to those special properties. Just create a New Folder (or use the My Documents>My Video folder), and Move your AVI file(s) to that. This should be done, with PrE closed. When you Open that Project back up, PrE will ask you, "Where is file _____.avi?" From the Finder, just navigate to that New Folder, or to the My Videos folder, and choose that "missing" file.
    This might also be a good point to talk a bit about what a Project file (PREL file) really is. This ARTICLE will give you some background. It will also explain why PrE asked "Where is file ____.avi?" once you Moved it.
    Good luck, and for a very good starter set of articles, I strongly recommend Steve Grisetti's Basic Training Series at Muvipix. To go beyond those articles, he has some great books on PrE, also at Muvipix.
    Good luck,
    Hunt

  • USB not recognizing any of my iphone?

    Please help!
    My macbook is not recognizing any of my iphones. I have 1 3gs and 1 3g phone when I plug them into usb ports they do nothing. Not even charge. When I connect the to my Macbook Pro the connect and charge and recognize fine. Can anyone help? Thanks

    Are you really running Tiger 10.4.11 still on your MacBook?
    This may be an issue for your iPhone.
    Adam

  • Itunes is not recognizing my itouch and iphone in the device listing.  Any suggestions

    does anyone have a solution as to why Itunes is not recognizing my Ipod or Iphone in the device colunm?

    Try holding down CTRL as you launch iTunes to see if it will repair the drivers.
    Or try Cerbu's post here.
    Or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
    Please let us know which approach works for you...
    tt2

  • IPhone 5 not recognizing SIM card, I can't activate the phone.

    Hi, everybody.
    A couple of days ago, I bought an iPhone 5 from a friend. I have an iPhone 4 and, as you know, they both have different SIM card sizes (4 uses micro size and 5 uses nano size). When I got the iPhone 5, I restored it to factory settings, but couldn't activate it 'cause I didn't have the nano SIM card (or SIM nano card, anyhow it goes), so I just turned it off. Next morning, I went to my mobile carrier to buy a nano SIM card (they took like 28 hours long to activate it…anyway) but the iPhone is not recognizing it, so I cannot activate it.
    I've gotten stuck in the white "Hello" screen for like 3 days already and I'm running desperate 'cause I wanna use my stupid iPhone 5…
    Please, guys, any help?
    EDIT: It cannot be restored via iTunes 'cause I get a screen saying that there's no SIM card in the iPhone I'm attempting to activate. The friend who sold me the phone showed me a way to restore it on the phone itself, without having to send the command through iTunes 'cause he said that from iPhone 4S onwards all phones have to be restored with a SIM card inserted. Thing is, I tried this two or three times on the iPhone 5 but the device still doesn't recognize the stupid SIM…

    EDIT 2: It cannot be restored via iTunes 'cause I get a screen message saying that there's no SIM card in the iPhone I'm attempting to activate. The friend who sold me the phone showed me a method for restoring it on the phone itself, without having to send the command through iTunes (connect the phone to computer, turn it off, hold both Home and Power buttons until the Apple logo disappears, release the Power button without releasing Home button, iTunes shows a message about an iPhone in restoring mode, restore, etc.). Thing is, I tried this two or three times on the iPhone 5 but the device still doesn't recognize the stupid SIM…
    Please, help

Maybe you are looking for