IMovie from iLife 08' doesn't work w/SL

I can not use iLife '08 with Snow Leopard 10.06.2. When I first tried after installing Snow Leopard I got the error code saying that I could not run the iMovie with OSX because I have version 7.0 of iMovie. I have re-installed the iLife disc and still the same. What can I do next?

Run software update and upgrade to 7.1.4

Similar Messages

  • The speed key of imovie 10.0.5 doesn't work at all

    the speed key of imovie 10.0.5 doesn't work at all

    Have you enabled it on the iPhone/iPod Touch and iTunes
    Once you have done this you need to ensure they are on the same WIFI network, If you have less than 50% power on the device then plug it into the mains.
    You can then force the first sync in the settings>general>iTunes Wi-Fi Sync menu
    lt me know if you get anywhere

  • Firefox stopped updating a while ago for unknown reason;now stuck at v 2.0.0.20-- trying to manually update from your site doesn't work.

    Firefox stopped updating a while (couple of years) ago for some unknown reason. The button is checked for automatic updates. It was a while before I noticed, so now I've been stuck at v 2.0.0.20 for some time, and trying to manually update from your site doesn't work.
    No update available will work, since I missed some. I can't even see what most of the buttons are on these pages of your site. Do I need to reinstall Firefox, as some people have suggested to me, and if so, how do I go about doing that? I'm not particularly computer program savvy.
    Thanks,
    Taav

    Which version of Mac OS are you running?<br />
    Is that a OS X 10.2 or 10.3 version?<br />
    The last Firefox version that works on OS X 10.2 and 10.3 is 2.0.0.20.
    *https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/
    The last Firefox version that runs on Mac OS X 10.4 is Firefox 3.6.28.
    *https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/latest-3.6/
    *http://www.mozilla.org/en-US/firefox/3.6.28/system-requirements/
    Current Firefox versions require a Mac with an Intel processor and OS X 10.6 (Firefox 16 runs on Intel Mac OS X 10.5).
    *http://www.mozilla.org/firefox/23.0/system-requirements/
    For an unofficial Firefox 17.0.8 ESR compatible version that runs on a PowerPC Mac with OS X 10.4.11 or OS X 10.5.8 you can look at TenFourFox.

  • IMovie & iDVD from iLife 06 don't work with my computer

    Hello all,
    I have just installed iLife06, and I have problems with iMovie and iDvd
    1. when opening a file from the old iMovie 05 it doesn't work. The transitions are messed up and the audio and video are out of phase. If I try to redo the transitions a big jump happens.
    2. I imported a new movie from my camera and when I wanted to edit it (just as I used to with the 05 program) it does not work. Transitions and fades don't work either.
    3. iDvd performs the same way with my old files. It doesn't read them properly and I can't use them anymore.
    iWeb, iTunes, iPhoto work just fine.
    The computer was reformated after having a new logic plate installed two weeks ago.
    Does anyone know what I can do to use these programs just like I used to before I installed iLife 06??
    Help appreciated.
    iMac (iSight) 17 inch   Mac OS X (10.4.4)   1.5 GB Apple RAM, iLife '06
    iMac (iSight) 17 inch   Mac OS X (10.4.4)   1.5 GB Apple RAM, iLife '06

    I also just installed iLife '06 on my G5 and iMovie HD '06 does not work at all. I am not able to import photos of any format or any DV clips. All of the buttons appear to be frozen (themes, media, editing, etc.). I do get the error message when I start up that some features of iMovie HD will not work since my graphics card does not support quartz extreme. Perhaps that is the problem, but I thought the program should at least run on a G5. I have tried several of the maintenance activities (repairing permissions, dumping logfiles, etc.) suggested on a previous posting, but with no success. I have used iMovie 4 for years with no problems. Is there anything left to do but try to reinstall iMovie 4?

  • I want to import .vro-files from my dvd-camcorder to imovie´11 but it doesn´t work

    hi,
    i´m a mac newbie and i´m tryig to import video-files from my panasonic vdr-m70 dvd-camcorder to imovie but it doesn´t work.
    please excuse my bad english i´m a german guy, 47 years old an not well trained in english.
    thanks for any help....
    max

    Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
    Once you're there, the site will check if all your plugins have the latest versions.
    If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
    To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

  • Web gallery built in Bridge, then linked from DW site, doesn't work

    Hi,
    Using the "web gallery" function in Adobe Bridge CS5, I created an HTML-based web gallery and uploaded it directly from Bridge to here on the web:
    http://www.sws-steel.com/test2/SouthwestSteel/
    I can view this in Safari 5.0.5 on my Mac, but it's a blank white page in Firefox and in Chrome. Even worse, my client gets a blank page in every Windows-based browser.
    If I can get it to work at all, my intent is to add it within a frame on this page:
    http://www.sws-steel.com/temp/photos.html
    Again, it seems to work in Safari (but only after a refresh on an iPad), but doesn't work anywhere else.
    The web gallery function in Bridge would be ideal to use for this gallery, but it just doesn't work and I have no idea how to fix it.  Any help or insights on what's wrong would be greatly appreciated.
    Thanks,
    Kent Bingham

    Missing DOCTYPE declaration for starters:
    http://www.w3schools.com/tags/tag_doctype.asp
    without that the browsers do not know which set of rules to apply when displaying the page. Correct that then...
    Validate the page here:
    http://validator.w3.org/
    Then come back here and we will look for problems. But very hard to correct anything until you get the foundation right.
    Best of luck,
    Adninjastrator

  • Read From Binary File doesn´t work on MCB2400 in LV2009 Embedded ARM

    Hello,
    I try to read a Binary File from SD-Card on my MCB2400 Board with LV2009 Embedded for ARM.
    But the output is always 0, if I use my VI on the MCB2400. If use the same VI on the PC it works fine with the same binary file.
    The
    access to the SD-Card on the MCB2400 works in other cases finde, if I
    try to read from a text-file it works without any problems.
    Are thre any constraints for the "Read From Binary File"-Node in Embedded in comparison to the same node on PC ?
      I have noticed that there is also a problem
    with the reading of textfiles. If the sice of the file is about 100Byte
    it doesn´t work anymore, too. I can´t understand it, because I read
    always just one Byte. And even if the implementation in Labview is so
    bad that it allways reads the total file in the ram it sould work. The
    MCB2400 has 32MegaByte RAM, so 100Byte or even a few MegaByte should
    work.
    But this doesn´t seem to be the Problem for the Binary-Problem. Because even a 50byte Binary-File doesn´t work.
    bye & thanks
    amin
    Solved!
    Go to Solution.
    Attachments:
    SD_Card_Read-test.vi ‏12 KB

    Hello,
    thank you for your Help.
    But I just want to read a Binary File, which is build by another program. And this is coded with 8Bit (like a normal Binary File) and not just with 7Bit (ASCII). So the workaround doesn't work in my case.
    I posted the Test-VI in my first post (here once again as picture). And it works fine on the PC, but if I try it on my MCB2400 the "Read Form Binary File" Node doesn't work.
    And it is also possible to open the Bin file with the "Read Text File" Node and see the cryptic content of the Bin-File. So the Problem seems to be in the "Read Form Binary File" Node.
    bye & thanks again
    amin
    Message Edited by aminat on 09-30-2009 03:28 AM

  • Woke computer from Sleep: USB doesn't work

    So, I woke my computer from sleep, and now all my USB ports are dead.
    I tried restarting, resetting the CMOS, removing the D-Bracket, which I had just installed (it didn't work either.).  Any thoughts?
    EDIT:  All ports get power, none get signal.

    Quote
    Originally posted by etruscan
    This appears to be a partial fix.  Now the USB root hubs work (i.e. the expansion bits, so I have a D-Bracket and the front Panel USB working.  However, the Back panel still doesn't work, as it appears to be controlled by the "Standard Enhanced PCI to USB Host Controller and the "Standard OpenHCD USB Host Controller," neither of which have power management.
    Any further suggestions are appreciated.
    Okay, with your front panel connectors, do they have a wire for pin 10 on the USB connector?  That would be the one next to the blocked out keying pin (pin 9).  If so, that could be causing your problem.  If you remove the pin from the connector that could clear up the problem.  I haven't personally had the issue, but I've seen it talked about.  If your internal USB connectors only have 8 wires on them, then I don't know what to tell you...

  • HP 3310 and wireless printing from Tiger - It doesn't work

    I went through it with HP Support team but they are too bad to help me out.. I'm just hoping that I can find a solution here.
    Basically I just bought this fantastic printer, using the USB cable it works perfectly.
    If i try to use the built-in wireless connectivity, then I have some problems. If I try to print a test page from the HP printer utility then after few minutes the test page prints. But not right away like it does connecting the computer to the printer using a USB cable.
    However if I try to print a page, any page from any application, then it doesn't work, it says Starting printing... and then it goes to Idle.
    I have no idea what to do, I've tried to reinstall every single HP program but nothing.
    I'm hoping on your solutions! Thanks!

    i solved my problem ages ago... you just need to download the updated drivers and software from the hp website.. don't install from the cd.. and all works fine

  • Web Gallery - Upload from web page doesn't work

    I've created a web gallery with upload permissions set, no name or password, and none of my friends or relatives can get anything to successfully upload.
    I'm using iPhoto 8 version 7.0.2 (341) to build my web gallery, but uploading for others just doesn't work. They get the dialog to enter their name and email, they can choose images, they get the progress window, then nothing. I've deleted the gallery and rebuilt it, I've renamed it, I've looked in my _gallery folders on iDisk, and so no, ad nauseum, ad infinitum.
    Anybody know what's up with the Gallery?

    I've not used the upload but some have reported that it does not work BUT that uploading via e-mail does work -- give the e-mail route a try as a work around and report the problem to Apple -- iPhoto menu ==> Provide iPhoto Feedback
    Larry Nebel

  • Since upgrade, I can't now tell the size of attachments added to email and the attachment link from the icon doesn't work properly. How can these be addressed?

    Since the upgrade to mozilla and to windows was installed on my computer, when I use my hotmail account with mozilla, I now cannot tell the size of attachments. Previously you could see the size of attachments but now when the cursor passes over the attachment, this works on Internet explorer but not Mozilla. Also, the icon for attachments often doesn't work, nor the "send as an online document" nor the "No thanks" icon.

    The "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.
    Firefox shows "Use custom settings for history" as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.
    If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".
    "Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a checkmark.
    You need to remove the checkmark on "Always use private browsing mode" to leave Private Browsing mode or chose the "Remember History" setting.
    *https://support.mozilla.org/kb/Private+Browsing

  • Importing RAW images from Canon S50 doesn't work

    I took some pictures with my Canon Powershot S50 in RAW mode but iPhoto '08 won't read them. Apple lists this camera as having a readable RAW format. What could be the problem?

    archived so no comments possible. Still doesn't work though.

  • Create AAC from Wav file doesn't work

    I've converted many WAV files to AAC and it worked fine.  The last few times I've tried it it isn't working.  I hear the bleep which I think indicates it's been converted but I can't find it anywhere so assume it didn't happen. 
    I have Windows XP.  I am running iTunes  10.3.1.55
    Any ideas would be appreciated.
    Thanks,
    Ginny

    Hello,
    thank you for your Help.
    But I just want to read a Binary File, which is build by another program. And this is coded with 8Bit (like a normal Binary File) and not just with 7Bit (ASCII). So the workaround doesn't work in my case.
    I posted the Test-VI in my first post (here once again as picture). And it works fine on the PC, but if I try it on my MCB2400 the "Read Form Binary File" Node doesn't work.
    And it is also possible to open the Bin file with the "Read Text File" Node and see the cryptic content of the Bin-File. So the Problem seems to be in the "Read Form Binary File" Node.
    bye & thanks again
    amin
    Message Edited by aminat on 09-30-2009 03:28 AM

  • Setting proxy from installation program doesn't work

    I think I found a bug in installation program.
    When I go to setup network in installation program, choose not to use dhcp and then setup the proxy configuration there it doesn't work.
    I know it's not a network problem or anything because I managed to install fine after going to another VC and using export http_proxy="myproxyip:port" and export ftp_proxy="myproxyip:port" and then returned to installation program on VC1.

    The best thing to do when you think you found a bug is to post in the bug tracker. Things have a tendency to get lost in the forums very quickly, as well a number of Arch developers don't come into the forums at all.

  • IMovie in iLife '08 will not work on a PowerBook G4 and....

    What a pain.
    1) Install the new OS X Leopard -- discover iMovie and iDVD no longer work
    2) Get the new iLife 08 -- discover the new iMovie does not work on a PB-G4
    Model Name: PowerBook G4 15"
    Model Identifier: PowerBook3,5
    Processor Name: PowerPC G4 (3.3)
    Processor Speed: 1 GHz
    Number Of CPUs: 1
    3) Okay Apple what do we do now?
    4) Is this a forced hardware upgrade???
    Thanks for the help.
    All the best,
    jh

    Our powerbooks can not run iMovie'08. Not enough horsepower.
    That is why we are offered a free download of iMovie '06.
    Joe

Maybe you are looking for