IMovie, Garageband and iPhoto not installed after Mac OSX Snow Leopard installation

I tried to repair the hard drive of my MacBook Pro. The MacBook Pro I own is not the latest one. I think this is from the previous generation. The disk cannot be repaired anymore so I just decided to erase the content then reinstalled the OS. I already updated the software but iMovie, iPhoto and Garageband was not in my applications. What should I do? I don't want to spend money to have those apps.

Perform a custom install of them from the DVDs which shipped with the computer.
(59137)

Similar Messages

  • Why does FlashPlayer not install in Mac OSX Snow Leopard?

    I've downloaded FlashPlayer for Mac OS, and the entire install process is completed successfully. But I do not have FlashPlayer capability, and I cannot find FlashPlayer on my hard drive. I've downloaded all of the recent updates for Mac OSX Snow Leopard, have closed all programs, shut down and restarted--nothing works. After a supposedly "successful" installation, I don't have FlashPlayer. What's up?

    ADE does not recognize Sony devices on the Mac.  You'll need to use the Sony software instead.

  • When I am re-installing the Mac OSX snow leopard onto an older Mac I run into the window that says select the disk where you want to install Mac OSX but nothing is there to select

    I am trying to re-install the Mac OSX snow leopard onto an older I mac with a new hard drive.  I run into the "select the disk "where you want to install Mac OSX but there is nothing in the window to select. Any advice?

    After you install a new hard drive, you need to boot to another drive to initialize it to MAC OS Extended (journaled) format and create the partition(s) on the drive. You do this using Disk Utility. Otherwise, the mac operating install process doesn't see a formatted disk to install to.

  • USB warning and ports not working after update to Snow Leopard from Tiger

    I've gone for hours through all kinds of forums without finding a proper answer, so here I am.
    This morning I've installed OS Snow Leopard 10.6.3 on my iMac, previously I had OS Tiger 10.4.11 running. Everything seemed fine until I restarted and then I started getting "USB drawing too much power" promps all over the place even though the only thing that's attached to the iMac is the keyboard and the mouse (they both work fine). The process went like this:
    The iMac is a 2.4 GHz Intel Core Duo from october 2007
    First I did an upgrade of my RAM, from 1GB to 2GB, that went ok.
    Then I runned the install dvd for Snow Leopard, I did not perform a clean install, just did it over my old data. After restart, everything worked but i got this USB warning message, one of them. At that point my usb's still worked, (even though the warning) I could print and scan. To get rid of the warning, i resetted the PRAM and SMC, as suggested everywhere. After doing so, the promps multiplied and my usb ports ceased working, except for the keyboard and the mouse attached to it.
    I've done the Apple Hardware Test, and it gives no malfunctions.
    Firewire works fine, Isight buildt-in camera and bluetooth too.
    I've tried all usb's and the keyboard will work in all of them, not like my printer and scanner which are completely ignored.
    USB power warning also appears at restart with no deviced connected (no keyboard and mouse, i've tried).
    I've also found in many forum entries  the possibility of a problem on the logic board, but since i've never had a problem with my imac until today i would not be sure about a hardware malfunction.
    The last thing i've found around that could be a clue is something about the kernel extensions, but that's complete chinese for me, I'm  a mac plug&play user and not too much of a mac expert.
    Does anybody have an idea about what could be going on? Should I perform a clean install of snow leopard? Would that solve the problem?
    Many thanks in advance to the community for the help, I'm quite lost since I've owned macs for the last 15 years and this is the first problem I have with one.

    I think it's serious, but if it didn't do it booted from Install Disc then Software is highly suspect.
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    Did we get the warning in Safe Mode?

  • I just purchased Mac OSX Snow Leopard Software Version 10.6.3 before I install I would like to know if it will still keep my documents, etc? and not lose them?

    I just purchased MAC OSX Snow Leopard Software update to Version 10.6.3.  At present my MACBOOKPRO is Mac OS X Version 10.5.8.  Since this is the first time I have purchased new software upgrade for my MACBOOKPRO I would like to know before installation if it will keep my documents, etc. intact or would it lose them?  Appreciate any help?
    Darci13

    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
    Insert OS X Installer Disc into the optical drive.
    Restart the computer.
    Immediately after the chime press and hold down the "C" key.
    Release the key when the spinning gear below the dark gray Apple logo appears.
    Wait for installer to finish loading.
    E. If updating:
    Download and install update(s) 
    Use Software Update, or
    Download standalone updater(s).

  • HT1338 I installed Mac OSX Snow Leopard 10.6.3 And now my Java is not working, what can I do to fix's this?

    I installed Mac OSX Snow Leopard 10.6.3 And now my Java is not working,what can I do to fix's this?

    Run Software Update to get to 10.6.8 and update Java.

  • I Have mac osx 10.5.8 and have tried to update to mac osx snow leopard 10.6.3, but I constantly get the install failed message. What could be the problem?

    My imac is currently running mac os x 10.5.8. I've tried to install mac osx snow leopard 10.6.3, but have been unsuccesful because the disc fails to install.
    What could be the problem?

    noondaywitch wrote:
    You should boot from the Installer DVD by holding down the C key during start up until the Apple logo and spinning cog wheel appears. Allow plenty of time for the installer to appear - it can take several minutes when booting from a disc.
    I suggest not doing this unless the Apple recommended method (starting by double-clicking on the
    Install Mac OS X icon while booted up normally) fails.
    There are several reasons for this:
    The Apple method performs a check of the DVD's integrity before starting up from it. This can't be done if you start up directly from the DVD.
    The Apple method "phones home" using the current OS's network settings to check for updates to the incompatible items database included on the DVD & writes a lot of pre-install data (the 'Mac OS X Install Data' stuff) to the HD before restarting automatically from the DVD to finish the installation. This may not work as expected if you start up directly from the DVD.
    The pre-install data on the HD speeds up the installation process (because running the OS from the HD to build the data is faster than doing that while running from a DVD).
    The Apple method makes it possible to "gracefully" cancel the installation before the automatic restart occurs without leaving the existing OS on the HD in a corrupted, "half-installed" state unable to restart the Mac. This sometimes happens if the installation process hangs & one has to force-restart the Mac to recover. As long as this occurs during the "pre-install phase" before the restart, the existing OS should remain untouched & intact.
    Also note that the Snow Leopard installer is quite a bit more sophisticated than the previous ones like for Leopard or Tiger. It automatically performs the equivalent of Disk Utility's Verify Disk step before beginning the installation & performs more checks during the installation process (including checking the pre-install data for errors). It is usually not necessary to remove the "Mac OS X Install Data" folder after a failed installation, which may just cause the process to take longer on subsequent attempts, but if nothing else helps it is certainly something worth trying.

  • Just installed mac osx snow leopard upgrade and connected my printer to it too, and realized I have no sound anymore

    Just installed mac osx snow leopard upgade and connected my printer too, and realized I have lost sound!   Can anyone help?

    In case I misunderstood, did you mean that the 10.6.3 version of Snow Leopard was the upgrade?  If so you need to update via 10.6.6 to 10.6.8.  These updates can correct minor system upsets.  
    And ... did you also repair permissions both before and after you upgraded.   You should do this when you progress via 10.6.6 to 10.6.8 too.

  • Minecraft Won't Launch Because of a Java or Root Certificate Error I Started Having When I Put The Install Disk in And Downloaded Mac OSX Snow Leopard

    I need help. I recently tried opening Minecraft after re-installing Mac OSX Snow Leopard with the Mac OSX Install DvD and now every time I try to open the internet these stupid certificate errors come up and Minecraft says it can't launch because of a broken/missing root certificate

    Hello Shelby,
    Thank you so much for the details regarding the issue you are experiencing with the Snow Leopard installation.  I recommend following these steps if you are having trouble installing Snow Leopard:
    The installation wasn’t successful
    If you were unable to install Mac OS X, try the following:
    Disconnect any external devices you don’t need during installation.
    Remove any cards from manufacturers other than Apple.
    Try installing Mac OS X again.
    If you were unable to install Mac OS X again, choose Utilities > Disk Utility. Select the disk on which you want to install, click First Aid, and then click Repair Disk. After repairing any problems, quit Disk Utility and then click Continue to try installing again.
    If you’re still unable to install Mac OS X, try erasing the disk before installing Mac OS X. Before you erase your disk, try copying your files to an external disk. When you’re ready to erase and reinstall Mac OS X, follow the instructions in the “Restoring your computer to factory settings” section of this document.
    I found this on page 7 of the Snow Leopard Installation Instructions:
    Snow Leopard Installation Instructions
    http://manuals.info.apple.com/en_US/Snow_Leopard_Installation_Instructions.pdf
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT5225 I have Mac OSX snow leopard , which I think is OSX10.6.8. I did as I was told and migrated to icloud having advised that not all devices were up to the Lion. I now find that the mobile phone receives the emails and so does the ipad, but not my desk

    I have Mac OSX snow leopard , which I think is OSX10.6.8. I did as I was told and migrated to icloud having advised that not all devices were up to the Lion. I now find that the mobile phone receives the emails and so does the ipad, but not my desktoptop. I have received an email from apple saying I would be able to receive the emails. Why cant I?  What do I have to do ? Surely it is not necessary to buy another upgrade???

    10.7.2 is required for full iCloud facilities, but you can still use your email. In theory you should be able to access your email in Mail at the same server settings, but this hasn't worked for everyone: you can set Mail up manually to access your iCloud email:
    Entering iCloud email settings manually in Snow Leopard or Leopard
    Once migrated, your mail will also be available at http://icloud.com

  • FireWire 400&800 (IMAC Core2) NOT WORKING after Upgrading to SNOW LEOPARD!

    My FireWire 400&800 (iMAC Core2) are *NOT WORKING* after Upgrading to SNOW LEOPARD!
    Any Solutions?
    Thanks!
    --Frank Strallents
    www.SHOCKPROOFX.com

    I'll try your suggestions....Thanks!
    Recently, I try to Re-install Snow Leopard, unfortunately, still unsuccessful.
    The Mybook Icon only appears if it is connected via USB.
    After using Firewire and getting used to the speed...USB 2.0 is like a Corvette racing a Veyron...lol
    I am not upset on these issues, it is normal for new OS to have these problems...unfortunately, even OSX is not invincible.
    I'm sure Apple/Steve is on every Programers A*s for a solution.
    I still think APPLE'S OSX will still be the future of Operating system!
    For now, still waiting for the patch and hopefully soon.
    Suggestions are still Welcome for a Solutions:-)
    Frank
    SHOCKPROOFX.COM

  • When I sync with my iphone i get an error reporting message but the sync still works.  After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds until I quit Entourage.  How do I turn this message off?.

    Question: 
    When I sync with my iphone I get an error reporting message but the sync still works.  After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds as long as Entourage is open.  This continues until I quit Entourage.  How do I turn this message off? It interferes with any other work I am doing.   I appreciate any suggestions.

    I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
    I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
    Edit: I just removed every project I have from the Media Browser. Still no luck.

  • I am running a Mac OSX Snow Leopard. Joined Creative Cloud for the year and now it won't allow me to

    I am running a Mac OSX Snow Leopard. Joined Creative Cloud for the year and now it won't allow me to install the app due to administrator rights. Does anyone know how to fix this ?  I have done all the necessary logging already.

    Duplicate post http://forums.adobe.com/thread/1382476

  • I imported M2T into CS4 Premier Pro on Mac OSX Snow Leopard does not play

    I imported several M2T files into CS4 Premier Pro on Mac OSX Snow Leopard, the files import just fine and when I double click on them, I see the video in the preview panel. However when I hit play, nothing happens. It does not play, just sits on the first frame. Even when I drop it into the timeline, same thing happens. Does not play but if I export what I put into the timeline, the video exported is fine. So I can't edit it, because I cant see where to put edit points. I really need help, need to get this project done asap.

    I have fixed this problem myself by searching the forum with argument "playback" "playback_issue". This a known problem. Go to link for a solution http://helpx.adobe.com/premiere-pro/kb/playback-stops-loops-soundbooth-premiere.html
    Thanks to myself.
    Jim

  • Bonjour, depuis que j'ai installé Mac osx snow leopard 10,6,3 je ne sais plus employé mon imprimante canon lbp 5000. mon mac ne trouve plus le driver et pas moyen de le télécharger. Quelqu'un aurait il une solution ??? merci

    Bonjour, depuis que j'ai installé Mac osx snow leopard 10,6,3 je ne sais plus employé mon imprimante canon lbp 5000. mon mac ne trouve plus le driver et pas moyen de le télécharger. Quelqu'un aurait il une solution ??? merci

    http://www.canon.fr/Support/Consumer_Products/products/printers/Laser/i-SENSYS_L BP5000.aspx

Maybe you are looking for

  • I upgraded itunes so I could link my i5 now itunes wont open i have windows 7

    I was attempting to sync my i5 to my laptop Windows 7 os and it said that I had to upgrade the version of itunes in order for this to happen. I upgraded and now I am unable to open up my itunes at all, I can't view my music or anything is it all lost

  • Need help about audited user.

    Hello folks Some days ago I detected that some user was trying to connect to my database with incorrect credentials, I detected it ´cause that user was blocked after 5 attempts (defined at profile) . So, I audited it and I could find OS user name, us

  • Struts' ActionServlet.init()?

    Hi I have some activities to take place just at the beginning of my application. How can I get access to ActionServlet to put them inside it's init() method? (I looked for this file every where in my root directory but I couldn't find it.) Is there a

  • Thunderbird-- outlook email account spinning beach ball

    TB has been working well. 4 email accounts. Three all OK .Have an outlook email address as one mail account. Yesterday sent an email with 2 small attachments. This seemed to hang but the mail did go. Ever since when i move to any folder on this accou

  • I want to clear my computer of crap

    someone help me!! how do i clear my computer of programs and thins that i dont use?, i´ve startyed to get alot och popups on my internet and so on...