Imovie hangs at the nearly end of a project
Ok I try to find more infos but I can't find postings concerning my problem.
I've got a project wich is nearly finished. The duration is about 50 minutes. Then i want to put on the last 2 sound tracks. But one of a sudden imovie hangs.
restarting the mac-no difference
clearing .plist(in library)-no difference
clearing cache files in the imovie events-no difference
is there a chance to get rid of this hangs.....
ok
one more i'm running a MacPro 2009
perhaps this is important
Similar Messages
-
HT6114 I tried to update 10.9.2 but the update hangs at the very end
I tried to update 10.9.2 but the update hangs at the very end of the installation. I had to do a hard reboot to clear and when I rebooted the update was not installed.
Thanks,Hey pdruryfl60,
Give the Combo Update a try. That should do the trick.
Hope that helps! -
Moved Itunes library now imovie cannot find the audio in my project
I just moved itunes library from my external drive to an internal drive on my Mac laptop. Now iMovie cannot find the music tracks for my project. How do I tell iMovie where to look for the new location of iTunes library
I'm the same as you with this one.
I had to move my itunes library to a new hard drive because it was taking up too much space. Now my imovie projects can't find my itunes library. One sound track when I right clicked in imovie I had the option to find media so I just located the same file but in a new location. This, however, doesn't work for all audio in my many projects.
I'm feeling very disheartened with the whole thing.
Any help would be appreciated.
Poppet -
Why does the play-head go back to the beginning of a timeline/project by default
When working in timeline mode, the program (Premier Elements 10) often wants to go back to the very beginnning of the timeline/project when you're working on the tail end of a project, (which of course, is most of the time). I'm not sure what key or function I may be hitting to cause this behavior because it doesn't happen 100% of the time (more like 80%). But it's quite frustrating to continually have to zoom out to view the whole project/timeline, stop the playback (it automatically goes into play mode from the beginning of the timeline), and then zoom back to where you were working at the end of the project.
I have been through all menus and can't find an option to shut that "feature" off.
I'm running Premier Elements 10 on a Windows 7 (64 bit) machine.emmettshort35
What version of Premiere Elements are you using and on what computer operating system is it running?
The answer to your question as I understand it is printed here already.
That would be, to get the Timeline Indicator back to the start of the Timeline 00;00;00;00, you would press the Home key.
All possible interpretations are included in what is already writtten above:
Computer Home Key takes the Timeline Indicator to the start of the Timeline.
End Key takes the Timeline Indicator to the end of the Timeline content.
Clicking on a spot on the gray area immediately above sight of the Timeline tracks commands the Timeline Indicator to that spot.
The Timeline Indicator can be moved from clip to clip (left to right) Page Down and from clip to clip (right to left) Page Up.
If you do not want playback of your Timeline content immediately after it is rendered there, go to Edit Menu/Preferences/General and remove the check mark next to "Play work area after rendering previews".
You can also check Edit Menu/Keyboard Customization/Application to see if there is anything of interest there.
If I have not targeted your question, please give further details and I will think about this some more to determine if there is something that I am overlooking.
Thanks.
ATR -
every time I repair my iPod with iTunes, it hangs at the end of the process (while checkin the recovery of iPod). What can I do?
I chose to restore it to factory defaults, but that never succeeded.
It hangs at the end of the process.
printscreen:
http://users.telenet.be/kevvanbelle/iPod/ipod.JPG
Language is Dutch :-)
Littery it says:
Check of Recovery of iPod.
Already for 40 minutes.
I closed down iTunes.
Now, when I turn on my iPod, there is the icon of iTunes with an usb cable towards it.
When I attach it to my computer and turn on iTunes, the message is there that a iPod was stuck in recovery mode and I should retry it.
And then I get the same story. Unpacking, installing, checking... blocked! -
I'm using FF 3.5.18 and I do not want newer versions because : using in the Open in New Tab page opens the near tab and not as a FF 3.5.18 or is it possible to do that open in new tabs would be the end. of the new FF version
You can change a preference to make tabs open
# at the end of all open tabs
# immediately after the current tab.
See: http://kb.mozillazine.org/About:config
*Type '''about:config''' in the URL bar and press the Enter key.
*If you see the warning, accept it (promise to be careful).
*Filter = browser.tabs.insertRelatedAfterCurrent
*Look at the "Value" column ('''false'''=open at end, '''true'''=open after current tab); Value = true is the default.
*Double-click that preference to toggle the value from true to false, or false to true
*Restart Firefox (File > Restart Firefox)
See: http://www.mydigitallife.info/2010/02/01/change-firefox-to-open-new-tab-at-far-right-end-of-tabbar-disable-insert-next-to-current-active-tab/ -
Can't pull a clip onto the end of my timeline ... (1st time on iMovie) One of the clips has an orange highlight on it. Is this causing the problem?
Ahhh, now I see the problem, Grasshopper. Problem is, we are all Grasshoppers, here.
Yes, that little piece of info is critical. I'd say the biggest difficulty with FCPX is the whole new language.
If I read you correctly, your Audio is in the Main Storyline (Track 1 in plain old Editorese). This makes anything else you add (above or below) a "connected clip", which we can no longer think of as "Track 2" because Jobs sez so. So, yes, you cannot just add a transition to either end of a connected clip.
No argument with Tracy's solution, because I haven't seen any other general solution presented for any attempt to treat connected clips as the main storyline. And, of course, when they were "track 1" and "track 2", you could.
An alternative solution, however, is to highlight the connected clip and press Ctrl-V to bring up the Video Animation Editor. Click the "reveal button" for Compositing: Opacity (bottom, right). Once open, there is a "fade handle" to the right top. Drag it left for however much fade you wish. (there is one on the left as well, but you were only talking about a fade-out.)
A second alternative, perhaps for future projects where everything keys on audio, may be to create a Gap clip (used to be called slug) in the primary storyline before ever dropping in the audio. Then you can add video to the main story line and modify it without having to go thru hoops to do the simplest thing. -
I am having trouble fading out a song at the end of an iMovie. Also, the volume of the song is too high...I would like it to be more background music? I have tried everything and can't figure it out...Can anyone help me, Please!!??
Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.
-
Why doesn't the volume control settings allow a greater range (on the low end)?
Maybe my ears are really sensitive, but for every iphone I've had, the lowest volume is not low enough. My phone is often louder than I want in my headphones even at the lowest setting. I find myself trying to lower the volume but ending up in silence. After putting it back up to the lowest setting, I end up clicking down again a few minutes later because it's too loud for my surroundings and situation. It's a huge volume jump from the lowest setting to completely off, and alot of times the lowest setting is too loud (even with normal buds or headphones).
The volume limiter setting only limits the upper end, but doesn't change the lower end (just makes the 16 set increments smaller in that reduced range). I know there is also an option to turn down the volume of individual songs in iTunes options, but this problem applies to all aspects of the iphone beyond just my music library (Music apps, Videos, etc.).
Why hasn't apple expanded the lower volume limits? There has to be a way, or is this not possible? Can anybody think of a way to fix this problem?Meg St._Clair wrote:
Look for headsets with a volume control.
I did exactly this for awhile. I used to have Skullcandy Asyms with the inline volume attenuator (wheel). They've since discontinued them, and my 5 pairs are having wire connectivity issues. All their current models have iphone like volume mechanisms. The problem is most headphones with volume controls tap into the phones own volume control (so the set 16 volume increments). I also looked into using a dongle attenuator, but having the dongle hanging off the phone is just awkward and not easily adjustable.
I don't know why there can't be some form of internal attenuator option, or some other way of extending the lower range of volume.
Does anyone else have this problem of the iPhone being too loud in semi-quiet environments? -
my Mac book air will not start up it hangs in the middle of the status bar when I turn it on and will not move.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
IMovie Hangs For 50 Seconds When I Open It
I use iMovie '11 (9.0.8). For some reason, when I first open it, it hangs for about 50 seconds, displaying the spinning pinwheel cursor. I can't skim over clips while it's hanging, I can't start editing a project. I can't do anything.
Does anyone know why this might be happening? How can I fix it?It appears the behavior is caused by iCloud pushing the information, to include the password, to Mail.
If I delete my iCloud account password and save the changes, the password reappears without me typing it in.
If I go to System Preferences/iCloud and uncheck the sync Mail box, my iCloud account in Mail disappears. When I recheck the sync Mail box, the account reappears, complete with password.
Based on my testing, you are stuck with things the way they are.
If you want to provide feedback to Apple, you can do that in Mail under the Mail menu. -
This report is hanging in the Loop
Hi Experts
1. This report is with parameter equipment no and date range . when I am placing the parameter in the report at first the report is displaying with one record which is correct. but it should display the more records according to the parameter selected it is not doing so.
2. when I press X ( CLOSE) option it is displaying with rest of the records but hanging in the loop when trying to come out.
3. This report is displaying double one by by and re-occuring with duplicate columns when closing it..
Please help me in correcting my report it is really urgent
regards
Piroz
REPORT ZFCR1 LINE-SIZE 220 LINE-COUNT 75
NO STANDARD PAGE HEADING.
TABLES : equi,
equz,
imptt,
imrg,
eqkt,
iloa.
type-pools: slis. "ALV Declarations
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid.
TYPES: BEGIN OF ty_data ,
equnr type equnr, " Euipment no
eqktx type eqkt-eqktx, " Equipment Text
eqfnr type iloa-eqfnr, " Equipment Sort field
idate type imrg-idate, " Measuring Date
recdu type imrg-recdu, " Unit of measuring ='KM','L','H'
recdv type imrg-recdv, " Counter reading data
cancl type imrg-cancl,
END OF ty_data.
TYPES: BEGIN OF ty_final,
equnr type equnr, " Equipment no
eqktx type eqkt-eqktx, " Equipment Text
eqfnr type iloa-eqfnr, " Equipment Sort field
idate type imrg-idate, " Measuring Date
min_date_km type imrg-idate, " Min Date
min_km type P DECIMALS 2, " Max Km
max_date_km type imrg-idate,
max_km type P DECIMALS 2, " Min km
t_max_min_km type P DECIMALS 2, " Total min_km-max_km
min_date_hr type imrg-idate, " Max Date
min_hr type P DECIMALS 2, " Max hr
max_date_hr type imrg-idate,
max_hr type P DECIMALS 2, " Min hr
t_max_min_hr type P DECIMALS 2, " Total min_hr-max_hr
min_date_lit type imrg-idate,
min_lit type P DECIMALS 2, " Min lit
max_date_lit type imrg-idate,
max_lit type P DECIMALS 2, " Max lit
fuel_con type imrg-recdv, " Total_hrs / t_max_min_hr
fuel_con2 type P DECIMALS 2, " Total_hrs / t_max_min_hr
km_l type P DECIMALS 2, " t max_min_km / t_max_min_lit
l_p type P DECIMALS 2 , " t_max_min_lit / t_max_min_hr
l_p2 type P DECIMALS 2 ,
END OF ty_final.
DATA: i_data TYPE TABLE OF ty_data, " internal table
wa_data TYPE ty_data, " work area
i_final TYPE TABLE OF ty_final, " internal table
wa_final TYPE ty_final. " work area
SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: p_equnr FOR equi-equnr OBLIGATORY, "no-extension no intervals,
p_idate FOR imrg-idate. "NO-EXTENSION NO INTERVALS OBLIGATORY,
"p_recdu FOR imrg-recdu." NO-EXTENSION NO INTERVALS ."default 'M3'" OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
SELECTION-SCREEN END OF BLOCK blk2.
SELECTION-SCREEN END OF BLOCK blk.
TOP-OF-PAGE.
FORMAT INTENSIFIED ON.
WRITE:/55(40) ' WAGNERS INVESTMENT LIMITED '.
WRITE:/50(40) ' VEHICLE FUEL CONSUMPTION REPORT ' CENTERED ,
2 'Page', sy-pagno.
FORMAT INTENSIFIED OFF.
WRITE:/50(40) '----
' CENTERED .
FORMAT INTENSIFIED ON.
WRITE:/2 sy-datum COLOR 3, sy-uzeit .
"WRITE:/1 S903-SPMON ."p_yearf.
ULINE.
"CENTERED.
write: /2 'Equipment No :'left-justified,p_equnr-low color 2 , ' to ' , p_equnr-high color 2.
write: /2 'Date From :', p_idate-low color 2 , ' to ' , p_idate-high color 2.
END-OF-PAGE.
START-OF-SELECTION.
select aequnr deqktx feqfnr eidate erecdu erecdv
into table i_data
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate and
e~cancl ne 'X'.
loop at i_data into wa_data.
CLEAR: wa_final.
READ TABLE i_final into wa_final
with key equnr = wa_data-equnr." BINARY SEARCH.
if sy-subrc EQ 0.
PERFORM F_GET_MAX_DATA.
PERFORM F_GET_MAX_HOURS.
PERFORM F_GET_MAX_LIT.
PERFORM prepare_final_rec USING'M'. " Modify Existing Record
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
ElSE.
PERFORM prepare_final_rec USING'A'. " Append New Record.
ENDIF.
ENDLOOP.
LOOP AT i_final into wa_final.
on change of wa_final-equnr.
perform build_fieldcatalog.
endon.
uline.
endloop.
refresh i_final.
clear i_final.
FORM F_GET_MAX_DATA.
select single MAX( eidate ) Min( eidate ) MAX( erecdv ) MIN( erecdv )
into corresponding fields of (wa_final-max_date_km,wa_final-min_date_km,wa_final-max_km ,wa_final-min_km)
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~cancl ne 'X' and
e~recdu = 'KM'
AND a~equnr = wa_data-equnr.
ENDFORM.
FORM F_GET_MAX_HOURS.
select single MAX( erecdv ) MIN( erecdv )
into corresponding fields of (wa_final-max_hr, wa_final-min_hr)
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~cancl ne 'X' and
e~recdu = 'H'
AND a~equnr = wa_data-equnr .
ENDFORM.
FORM F_GET_MAX_LIT.
select SUM( e~recdv )
into corresponding fields of (wa_final-fuel_con2)
from equi AS a
inner join eqkt as b
on bequnr = aequnr
inner join imptt as c
on cmpobj = aobjnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~cancl ne 'X' and
e~recdu = 'L'
AND a~equnr = wa_data-equnr.
ENDFORM.
FORM prepare_final_rec USING p_mode TYPE char1.
wa_final-t_max_min_km = wa_final-max_km - wa_final-min_km .
wa_final-t_max_min_hr = wa_final-max_hr - wa_final-min_hr.
if wa_final-t_max_min_km <> 0 .
wa_final-km_l = ( wa_final-max_km - wa_final-min_km ) / ( wa_final-fuel_con2 ) .
ELSE.
wa_final-km_l = 0.
endif.
if wa_final-t_max_min_hr <> 0 .
wa_final-l_p2 = ( wa_final-fuel_con2 ) / ( wa_final-t_max_min_hr ) .
ELSE.
wa_final-l_p2 = 0.
endif.
IF p_mode = 'A'.
wa_final-equnr = wa_data-equnr.
wa_final-eqktx = wa_data-eqktx.
wa_final-eqfnr = wa_data-eqfnr.
wa_final-t_max_min_km = wa_final-min_km - wa_final-max_km .
wa_final-t_max_min_hr = wa_final-max_hr - wa_final-min_hr.
wa_final-km_l = ( wa_final-max_km - wa_final-min_km ) / ( wa_final-fuel_con2 ).
wa_final-l_p2 = ( wa_final-fuel_con2 ) / ( wa_final-t_max_min_hr ) .
APPEND wa_final TO i_final .
ELSE.
MODIFY i_final FROM wa_final
TRANSPORTING
eqfnr
max_date_km
min_date_km
max_date_lit
min_date_lit
max_date_hr
min_date_hr
max_km
min_km
max_hr
min_hr
t_max_min_km
t_max_min_hr
fuel_con2
km_l
l_p2
where equnr = wa_data-equnr.
ENDIF.
ENDFORM. " PREPARE_FINAL_REC
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
form build_fieldcatalog.
I.e. Field type may be required in-order for
the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EQUNR'.
fieldcatalog-seltext_m = 'Equip no'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EQKTX'.
fieldcatalog-seltext_m = 'Description'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 1.
fieldcatalog-outputlen = 40.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EQFNR'.
fieldcatalog-seltext_m = 'Sortfield'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MIN_DATE_KM'.
fieldcatalog-seltext_m = 'Min Date'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 3.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MAX_DATE_KM'.
fieldcatalog-seltext_m = 'Max Date'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 4.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MIN_KM' .
fieldcatalog-seltext_m = 'Min KM'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 5.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MAX_KM' .
fieldcatalog-seltext_m = 'Max KM'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 6.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'T_MAX_MIN_KM' .
fieldcatalog-tabname = 'i_final'.
fieldcatalog-seltext_m = 'Total KM'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MIN_HR' .
fieldcatalog-seltext_m = 'Min Hr'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 8.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MAX_HR' .
fieldcatalog-seltext_m = 'Max Hr'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 9.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'T_MAX_MIN_HR' .
fieldcatalog-seltext_m = 'Total HR'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 10.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'FUEL_CON2' .
fieldcatalog-seltext_m = 'Fuel'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 11.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'KM_L' .
fieldcatalog-seltext_m = 'Km/L'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 12.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'L_P2' .
fieldcatalog-seltext_m = 'Lit/HR'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 13.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
IT_EVENTS = GT_XEVENTS
i_save = 'X'
is_variant = z_template
tables
t_outtab = i_final
exceptions
program_error = 1
others = 2.
if sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORTHi Vishaal
This report is running fine with Simple iterative report , but when I am changing it to ALV the above problem is comming
The heading and the records goes on duplicating in the column when trying to close
regads
Piroz -
running imovie on a powermac w 10.6.8. went through the tutorials. imported my clips, got the hang of basic editing, and created a project.
was pretty happy with it, but needed to shut down and come back to work on it later. when i did come back, the entire project was gone.
how do i get the program to save my work in progress, without finalizing it?
thanksSo, everything worked out just fine!
I have all my material in the ProRes Codec on a seperate drive now. The project itself was kept or rather duplicated, the bin structure etc stayed the same but is linking to the newly created files. The playback and workflow is fluent. I am happy!
Time info: For about 120 GB of material the codec change process took 25 hours.
Thanks for your help!
Best
*a -
IMovie Hangs After Full Quality Sharing Is Complete
Hi,
Why does this happen? I did a Full Quality Share on a 2-1/2 hour multi-clip movie (using Share Selected Clips Only). The export progress dialog hung after the export was clearly finished. I eventually had to Force Quit iMovie.
The exported movie looks fine in QT Pro. However, Movie Properties in QT shows that this movie is 24 frames longer than what I exported from iMovie. Doesn't seem to be a big deal, but annoying nonetheless.
I'm more concerned about iMovie hanging after a long movie export as described.2-1/2 hour multi-clip movie (using Share Selected Clips Only)
so, your project is in timeline even longer then 150min? how much did you import into iM, to create such a "beast"? must be a gigantic project, hm?... Titanic II... ;-))
iM is a consumer product, we do read of reports here, that from some point of size (imported data, length, complexity of project), iM is a little "overwhelmed..." esp., iM is part of iLife, meaning, mainly meant exports go to tape (=60min max.) or iDVD (120min max.)
secondly, MacOsX is a UNIX system, which makes excessive use of socalled temp-files on (startup-) harddrive... it is recommended, not to overcrowd the drive 80 - 90% of max.
probably, your ~35GB of data transfer from a ~60GB project was simply too much for your Mac?
helpful? -
Cannot add items to DOCK. Dock bar near end?
I cannot add items to the dock and the dock bar is near the end of the dock listing. I cannot move the bar.
Please clearify...
You can move the doc with the Dock system preferences to left, bottm, or right. Or using something like TinkerTool vertically left side or right side.
As for adding items, generally applications are to the left of the divider (toward the right end) and other stuff to the right of the divider. You add stuff by dragging it into the dock and option drag it out to remove it (or control click and use the options contextual).
Are thses things not working for you?
Maybe you are looking for
-
Is there a way to create a temp table each time someone hits a procedure?
I am creating a procedure in Oracle 10g to take data from Oracle to be put in a cognos report. The problem with creating a perminent table is that several people will be running this report at the same time, which means the procedure will be run each
-
ff asked once to save the PW a website. I clicked "Not Now" However FF has not asked me to save PW on this particular site. FF does ask on different and new sites. I have checked the "Exceptions" log in the Security tab, it is empty.
-
I can't edit the audio of my movies
I'm a noob at Adobe Premier so I don't really know much about the technical speak that is used with this program. I am going through some learning CDs for this software and I decided to give a shot at putting together some of my own videos. One thing
-
What is the Internet address for finding my documents in iclouds?
I Can not find my documents in i-Clouds, because I cannot login in i-clouds work. Who can help.Thanks.
-
View based autorization in MM01
Hi All, We would like to restric the users not allowed to enter the data in costing and accounting views of MM01. only few user will be having authorization to enter the data in accounting and costing view of MM01, Waiting for your reply Ranjan