Imovie HD 6 causes pictures to jump using reflection theme

I'm using iMovie HD, and I imported 3 pictures into my project. I used the reflection white theme, and I used the "Open" template from the theme. When I preview it, the pictures move as normal, but at one point they jump/flicker as the boxes move around. I've searched the boards and I can't find anyone else that has this problem, however I've tested it on 3 different macs (my home machine, and 2 work computers), and I've used different pictures and I still experience the issue. Is this a known bug?

Hi
I had the same problem using the 'Open' sub-theme theme for the 'Travel' theme.
Photos I had in the boxes appeared to 'jump' at one point just before the clip moved out of view.
I think it is something to do with the Ken Burns settings applied when you import the photos.
Have you tried
(a) amending the length of the Ken Burns zoom to be longer or shorter than the current one. Sometimes if a clip has a length longer than the ken burns length on the photo, the photo will revert to the start position of the zoom and begin to zoom again.
(b) tried reducing the amount of zoom used in ken Burns?
thanks
david

Similar Messages

  • Burning a themed imovie in idvd, do i have to use a theme there too?

    HI, I have created a movie in imovie using the Photo Album theme and have sent it to media browser.  I want to burn it to a DVD.  When I go to iDvd it seems I have to use a new theme there with drop zones.  Can I just burn the movie I created without using an additional theme?

    The themes in iDVD are only for the menus and not for the slideshows or videos.
    OT

  • Know pictures that are used in imovie HD

    I want to know if there is a way to know which pictures you allready used when using an ipphoto album in imovie.
    Example: I am doing a movie in imovie and aI already organized all the pictures I want to use in an album in iphoto. I am dragging them in imovie, from the media tab in imovie. There are around 500 pictures in that album and I just want to know if there is a way to know which pictures I already used.
    I am using ilife 06 (iphoto 6 and imovie 6)..
    Thanks.
    glory

    Welcome to the forum, Glory!
    Sorry, there is no convenient list that lets you see which photos have already been imported. There's a list of clips buried deep inside the iMovie project file, but it's not written in plain English so it won't help.
    The most convenient, perhaps, is to open the project's Media folder in a Finder window. It lets you see the file names of all the clips, including the names of the imported photos. (Each photo is copied to the Media file as it is imported to iMovie.)
    To look inside the project package, Control-click on the project icon and choose "Show Package Contents" from the popUp menu that appears. Open the "Media" folder. If you show the file list in alphabetical order, it shouldn't be hard to spot the photos. (If you wanted to get fancy, you could create a special Spotlight folder to show you just the pictures in the Media folder.)
    An easier way, however, may be to create a special album in iPhoto, then drag photos from that album of iPhoto directly into the iMovie HD timeline (instead of dragging them from iMovie's photo list.) You would select the photos in iPhoto, drag them into iMovie, then delete them from the album. You would know that all the photos still remaining in the album would not have been imported to iMovie.
    Karl

  • Using an iMovie on a digital picture frame

    My sister is developing an iMovie that will be played during our mother's 90th birthday party. After the party, we'll want to put that iMovie on a digital picture frame that we haven't purchased yet. What things should we consider to select a digital picture frame that will be compatible with iMovies?

    What movie format does the picture frame require?

  • OSX update 10.10.2 causes mouse to jump around and text to be highlighted randomly in Dreamweaver CC 2014

    OSX update 10.10.2 causes mouse to jump around and text to be highlighted randomly in Dreamweaver CC. When trying to click on a specific line of code in a js file the cursor ends up in a different place in the script and several lines of code highlighted. Clicking again jumps the mouse to a different position and even more lines of code highlighted and some characters rearranged, breaking the lines of code. Very frustrating.

    Preran,
    I am having the same issue. I have a MBP connected to 2 x Dell 27" monitors over Mini DisplayPort to HDMI cables. Once I updated to OS X 10.10.2 this cursor highlight/jumping around issue only occurs on the connected monitors. If I move the program to the main laptop display the issue goes away. It does not require me to restart the program or the machine to make it work correctly. One way I am able to identify the issue is if I go to the line numbers in code like I wanted to select multiple lines - in the one that works correctly, the cursor turns into a white version where the tip of the cursor points to the right. When it is wrong, the cursor stays black and will only have the tip point to the left. Its just another way I identified if it was working cause I tried uninstalling DW and reinstalling - didn't work. Reset preferences as you discussed - no go. And I used other editors like IntelliJ and Adobe Edge Code - all of which work fine and don't display this issue.
    I tried the preferences reset you suggest and it doesn't work. I have another machine with OS X 10.10.1 on it and this issue is not there on any monitor. Any help with this ASAP as it pretty much stops you from being able to do any editing especially with longer pages as it consistently wants to page up when you select anything and if you then click again in another area it tries to move the highlighted code to that new spot.
    Update: I have a USB Microsoft Arch touch mouse connected (always worked just fine). When I go to place my cursor at some point in the code it causes the highlight flicker. If I switch over and use the built in trackpad, then I can place the cursor without the highlight issue. When trying to select multiple lines or sections of code, that still see's the highlight, page up and move of code issues regardless of input type.

  • I am new to iMovies.  When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch.  Very annoying.  How can I fix this?

    I am new to iMovies.  When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch.  Very annoying.  How can I fix this?

    DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

  • How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

  • Is there a way i can use the themes from imovie in final cut

    i would like to use the themes in iMovie '11 (e.g. news theme) in my video in final cut.

    You can't directly. You could make part of the video like the open in FCE and export it and then import it into FCE, but the themes don't apply to FCE.

  • How do I dispute a copyright claim against a video i made using a trailer in iMovie? The only content I used was the video I shot of friends daughter on a merry-go-round.IMovie had the music etc that I used.

    How do I dispute a copyright claim against a video i made using a trailer in iMovie? The only content I used was the video I shot of friends daughter on a merry-go-round.IMovie had the music etc that I used. Here's the message It gives a number of options to choose from if I want to dispute the claim but I don't know which one this would come under. Several obviously don't apply and of the ones left I don't know which content that is in IMovie that I use comes under. "This video is my original content and I own the rights to it" "I have a license or written permission of the property rights holder to use this material" "My use of the content meets the legal requirements for fair use of fair dealing under applicable copyright laws" or "The content is in the public domain or is not eligible for copright protection."

    You want to use the "I have a license..." option, since clearly the music is not yours, but Apple has granted you a license.
    For your license, see this document, section 2.M. http://images.apple.com/legal/sla/docs/iMovie.pdf
    For more on this irritating problem and why it is so hard to solve, see this article. (It is a problem for Final Cut Pro users as well.)
    http://www.larryjordan.biz/app_bin/wordpress/archives/1842

  • I have updates for iMovie and iPhoto but when i try to update them i'm told To update this application, sign in to the account you used to purchase it." even though i bought it and it is on my iMac!

    I have updates for iMovie and iPhoto but when I try to update them through App Store I'm told that "To update this application, sign in to the account you used to purchase it." even though I bought it and it is on my iMac! Any suggestions on what I need to do?

    Hi...
    Delete both apps using this utility >  Download AppCleaner for Mac - Uninstall your apps easily. MacUpdate.com
    That will delete the apps and all associated files.
    Then re download the apps. That will download the most recent version updates included.
    How to re download apps from the Mac App Store:
    Open the App Store. From the menu bar click Store > Sign In
    Click Purchases from the top of the App Store window.
    Select which apps you want to re download. Then right or control click where you see Installed  then click Install.
    Make sure and use the same Apple ID used for the original purchase.

  • When i turn my iPad on, it keeps showing me how to use it, some random pictures, how to use mail etc. Anyway how to disable this?

    When i turn my iPad on, it keeps showing me how to use it, some random pictures, how to use mail etc. Anyway how to disable this?

    Sounds like you got a store demo. Look in your settings and see if you see "Demo Mode/Demonstration Mode" or something similar.

  • Derby db named query causes parse error when using derby db MONTH function

    Hi all!
    I'm trying to create an application using the persistance api and beans binding. I have created my database and entity classes.
    My problem is creating a named query that uses some of the functionality from the derby database (which is embedded in the application).
    I have a named query:
    @NamedQuery(name = "Vehicles.findbymotmonth", query = "SELECT v FROM Vehicles v WHERE MONTH(v.lastmotdate) = :monthnumber") The actual query works fine when I send it directly to the db (with the parameter filled in) but causes an exception when used as a named query:
    Local Exception Stack:
    Exception [TOPLINK-8025] (Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (12/06/2007))): oracle.toplink.essentials.exceptions.EJBQLException
    Exception Description: Syntax error parsing the query [Vehicles.findbymotmonth: SELECT v FROM Vehicles v WHERE MONTH(v.lastmotdate) = :monthnumber], line 1, column 32: unexpected token [MONTH].
    Internal Exception: line 1:32: unexpected token: MONTH
            at oracle.toplink.essentials.exceptions.EJBQLException.unexpectedToken(EJBQLException.java:389)
    ... I've tried looking for solutions online but it seems evryone just writes up the original java db application example provided by sun and no one has tried doing more than "select c from customers c".
    I'm using the netbeans ide (6.5).
    Please tell me there is a simple solution to this and the persistance API can handle complex queries!
    Thanks in advance.

    one solution: assume the toplink library to be so full of bugs as to be unusable and switch to the hibernate persistance manager where it works fine.
    Edited by: pointer2null on Feb 17, 2009 11:02 AM

  • I used iCloud before I updated to the new iOS 6 and now I only have 44 pictures how can I get them all back?

    I used iCloud before I updated to the new iOS 6 and now I only have 44 pictures how can I get them all back?

    Photo stream only keeps your photos for 30 days.  After that, they are removed from your photo stream but not from any device that has already received them.  Chances are, the 44 photos are from the last 30 days; the others are not there because they are no longer in your photo stream.
    If the photos were in your camera roll when you last backed up, restoring to the backup should recover them.  However, you will have to restore to the entire backup to do so.  If they weren't backed up or imported to your computer, there is no way to recover them now.
    To be sure your photos are saved, regularly import them from the camera roll to your computer as outlined here: http://support.apple.com/kb/HT4083.

  • How to create a Lync policy to force the AD picture to be used.

    Hi there
    We are using office 365 and ADFS, how we can create a Lync policy to force the AD picture to be used.
    Best regards,

    On-premise this works
    New-CsClientPolicy -DisplayPhoto PhotosFromADOnly
    however in o365 I believe  there only these options 
    PLEASE REMEMBER, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answered"

  • Changing picture at runtime using delphi

    Post Author: iman_400
    CA Forum: Other
    Please help me, is there anyway we can change picture at runtime using delphi 7.0 and CRXIR2?

    Hi, Lee;
    For the version of Crystal Reports that comes with .NET, you can use something like one of our samples shows:
    https://smpdl.sap-ag.de/~sapidp/012002523100006252822008E/net_win_smpl.exe
    Look for the sample, vbnet_win_DynamicImage.zip. It uses an ADO.NET dataset to change the image.
    For Crystal Reports XI R2 and Crystal Reports 2008, you can more directly change the image location using built in functionality.
    In the Designer, choose Insert > Picture. Choose a default image to show and save it. Right-click on it and select Format Graphic. Go to the Picture tab and click the formula button for Graphic location. Save the report.
    Then, at runtime you can populate the Formula with the new location for your image, either a URL or disk file location.
    See the following note for more information:
    [Image|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333333373334%7D.do]
    Best Regards,
    Jonathan

Maybe you are looking for