Imovie HD suddenly jumps/skips/freezes after many successful changes
1.8 GHz G5, OSX 10.3.9, Imovie HD 5.0.2, Qt 7.0.4
I have a one hour video which is almost finished. But, after making many successful changes I suddenly find that any new change will cause the movie to get stuck on one frame, and then jump to another futher down. Sometimes the sound will move correctly, but the picture on my screen does not change. When this happens, the start/stop button on the screen does not respond to commands, and sometimes the pinwheel will appear.
I have corrected the permissions, done the drive repair, done the P/Q P ram clearing function, and Apple had me trash the Imovie Plist and cache to no avail. I had this problem once before with the Imovie that came before Imovie HD and I changed the hard drive at that time, so the drive is ok and I also get the same result when i use the external drive.
This only happens one hour videos with many changes. I have 1.5 Gb of memory. could some of the memory chips be defective? your help will be appreciated.
Hello, taronger,
You have 1.5 GB memory? You mean hard disk space? That is not enough for iMovie to properly operate. You need at least 15-20GB free space.
I see that you are using an external drive as well. It needs a good amount of free space also.
That said, I notice the same jerking, stuttering of iMovie playback whenever I have a lot of transitions or effects, or when my movie exceeds about 1hr 20min. I have found by experience that my burned DVD will be fine. So, I just manually move the playhead to be sure the change took effect, and continue on with making my movie with all its transitions and effects. If I want to use this version to burn to DVD, I create my chapter markers and then save my completed iMovie. I open iDVD, create my project and drop my movie into it. I save it as a disk image, and if that is ok, I know it will burn fine.
Sometimes I want chapter markers right on my transitions, so in that case, or if I want to play the movie through first before creating my DVD, I will save iMovie as a QuickTime Full Quality movie. (You must have enough free space to do this). I then open a new iMovie project and import the quicktime version of my movie. I create my chapter markers and use this movie to drop into iDVD and burn my DVD.
I also use the QT version to share back to my camcorder, as I have found that the jumpy/skipping one will not share smoothly.
If your iMovie looks ok when you manually move the playhead, you might try one of these methods to get a good burned DVD.
Similar Messages
-
Video preview skipping/freezing after a few seconds
Hi All,
I am a new user of Premiere Pro and am having an anoying issue with video stuttering/skipping in the preview windows when editing.
I am trying to edit GoPro footage shot from a Hero 3 Black in 1080p 60fps. The video preview is at 1/2 res and it will play smoothly for about 3 seconds, then start skipping. If I pause the preview for a few seconds and restart, it catches up and plays smooth for 3 more seconds or so, then skips again.
I have tried to convert the raw gopro footage to a premier preset (MPEG-2) using brosoft video converter and have the same problem.
I thought it may be due to hardware limitations with my older PC, but I have upgraded the slowest parts of the system with no luck (the rest of the PC is running like lightening now though).
Here is the current setup:
OS - Windows 7 Ultimate 64 Bit
CPU - AMD Phenom X4 9750 - 2.4Ghz Quad core - 64bit - specs: http://www.cpu-world.com/CPUs/K10/AMD-Phenom%20X4%209750%20-%20HD9750XAJ4BGH%20(HD9750XAGH BOX).html
Ram - 8.00 GB Dual-Channel DDR2 @ 400MHz
Motherboard - ASUSTeK Computer INC. M2N68-VM (AM2) (sata II, not sata III compatable)
Graphics - 1535MB GeForce GTX 580 (EVGA)
HDs -
New 256GB Samsung MZ-7PD256 840 Pro Series Solid State Drive (SATA) - System drive
932GB Western Digital WDC WD10EADS-00M2B0 ATA Device (SATA) - Video storage
1863GB Western Digital WDC WD20EARX-00PASB0 ATA Device (SATA) - General storage
Is there anything else I should be trying here or is this just a limitation of HD video??? Surely I should be able to preview what I am trying to edit without pausing the footage every 3 seconds? =(.I have a few other things running at the same time, but I disable network, Antivirus, Media Server apps etc etc (anything thats hungry).
When play skipps I see RAM at about 50-60% useage, CPU below 50 % on all 4 cores. I have notised that the HDD spikes up to 100% at times but then drops off. I have tried running everything off my SSD and seems to make no difference.
When I render a clip, it play perfectly....so seems to just be the preview of the GoPro clips thats causing issues. I will have a play with converting the footage to something smaller/lower quallity, but that defeats the purpose of shooting HD footage.
Another thing I have been notising is that the rendered final clip is rather blury/has some issues with fast moving footage. Any ideas?
http://youtu.be/l-js5KpDq_4 -
Installation freezes after a successful download of OS X 10.5.2 Update
Hi. I can't find a topic which is similar enough to my problem to consult.
I have tried on several occasions to download the new update using Software Update. It claims to be downloaded, then asks me to restart. After it begins the restart process, it freezes of the "configurating volume" screen - I have done this a couple of times and and left it alone for an hour or so - no progress is made.
I need assistance - I don't want to use the stand-alone download site - I only have dial-up, and that version of the update would take over a day and a half to download.
Thank you.I do NOT have Software Update automatically check for updates on principle. It is probably OK for home users who have no complications but I prefer to retain control of when or if Software Update is used.
Usually when I run it I allow small-sized updates to be installed by unchecking other larger updates.
I have 4 drives to update so it's more efficient to download the standalone updates even though they are sometimes larger. I copy the original downloads to each drive then startup from each drive in turn and apply the downloads. The only precaution is to ensure that where it matters the updates are applied in the recommended order. I have had no problems with any Apple update when I've used this procedure.
Some people recommend starting in safe mode before applying any update. I haven't done this but it's probably a good idea - another reason for not allowing Software Update to operate automatically. It's also wise to run Disk Utility permissions repair before and after applying updates.
With many of us using different ISP's and having variable quality links I guess it's inevitable that some downloads will be corrupted and cause us problems. I'm fortunate to have never had this problem in the 20 or so years of using Macs.
Neville -
My macbook pro is freezing after my screen changes color
My screen has been freezing a lot for some reason. I will be working on anything on the computer then all of a sudden the screen will become distorted and start to change colors then do a hard freeze. I have to hold down the power button and do a hard reset. Any suggestions on what this could be?
Model Name: MacBook Pro
Model Identifier: MacBookPro6,2
Processor Name: Intel Core i7
Processor Speed: 2.66 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 4 GB
Processor Interconnect Speed: 4.8 GT/sMacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video
-
IMovies 06 - unable to import movies after several successful imports
I am importing Hi8 video from a Canon ES4000 using iMovies 06. I have had no problems until the last two days. iMovies seems to be recognizing the camera but will not import when I hit the import button. I get the acknowledgment from iMovies that "Camera is Connected" and "Camera Playing".
I am using a DAC-200 Data Video converter which is connected via firewire cable. Like I mentioned earlier I have had no problems. (I have successfully downloaded and burned 9 DVDs).
I have restarted computer, opened a new iMovies project, etc with no results.
The only thing I can think I have done recently is allowed a software update to be performed. Here is a list of my download log:
2008-07-26 18:42:40 -0500: Installed "Safari" (3.1.2)
2008-07-26 18:43:38 -0500: Installed "iTunes" (7.7)
2008-07-26 18:47:26 -0500: Installed "Security Update 2008-004 (Intel)" (1.0)
2008-07-27 18:15:35 -0500: Installed "AirPort Extreme Update 2008-002" (1.0)
I personally wouldn't think any of the above updates would cause a problem.
Would it be worth uninstalling the updates???
I would appreciate any help I can get....Frustrated to no end!Shortly after posting this on the forum I unplugged and restarted everything one more time and now importing works. Still not sure what the problem was. Hopefully this will get me to the end of my project.
-
After many successful DVD burns, my iDVD has developed a problem! It only allows 2 DVDs to be burnt. Then, it freezes. The display is: "burn" highlighted with blue "task" bar complete. And, message is "cleaning up" followed by "done" underneath blue bar. However, at this point, I cannot cancel or close iDVD window. PLEASE HELP!!!!
Just to add to Sue's excellent advice ..... might also be that your burner is over heating after multiple burns. try allowing more time in between burns to avoid system freeze (that or invest in an ext. DL FW Burner).
You can make your own burner like I did from a pioneer S-Drive 110U, 111, or 112 mounted within a standard FW enclosure like this:
By sdmacuser, shot with Digimax A7/Kenox D7 at 2007-01-31
or you can buy one preconfigured for you:
http://www.lacie.com/us/products/product.htm?pid=10944
http://www.newegg.com/Store/SubCategory.aspx?SubCategory=552&name=Mac-Hard-Drive s
http://www.sonnettech.com/
http://eshop.macsales.com/item/Firmtek/SATA2SEN2E/
http://www.icydock.com/product/mb559ueb-1s.html
http://www.lacie.com/au/products/range.htm?id=10033
http://www.newegg.com/Product/Product.aspx?Item=N82E16817198006
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/400+USB2/
http://g-technology.com/Products/G-DRIVEQ.cfm
http://www.wiebetech.com/products/toughtech.php
(suggestion: look for one that has good ventilation / a strong fan / both) -
Premiere Pro CS5.5 Program Monitor suddenly freezes after 1sec
Program Monitor suddenly stops working and freezes after 1sec in Premiere Pro CS5.5 and causes crashes, as well as the automatic backup versions. The picture freezes and audio is still playing. The manual backup version i made of the same project 2 days ago seams to work without freezing. Whats wrong here?Program Monitor suddenly stops working and freezes after 1sec in Premiere Pro CS5.5 and causes crashes, as well as the automatic backup versions. The manual backup version i made of the same project 2 days ago seams to work without freezing. Whats wrong here?
Also read Troubleshooting guide for Mac freeze
http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html
And, for future reference, the Information FAQ http://forums.adobe.com/message/4200840 lists what you need to provide when you ask a question -
I installed iCloud yesterday and since my mac book pro is slowing down to almost total freeze after 8 minutes when connected to internet. Anyone knows what to do? Many thanks
Removed trend micro smart crap files from disco and it worked.
-
I was on a website all of a sudden my screen freezes I was able to get out of that screen after a few second and then noticed all my app icon disappeared I have an IPhone 5. Has this happened to anyone before?
That is very strange! Have you been able to get your apps icons back now? Have you attempted a soft reset by holding the power button and home button at the same time until the phone restarts? Keep me posted with the results!
BryanS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
After installing 10.9.4 computer freezes after sleep
After I installed 10.9.4, my Imac bean to freeze after being asleep. Sometimes I can move the mouse, but it has no effect on anything. Most of the time I move the mouse or keyboard and I get eh color wheel of death. Here is my info, can you help?
EtreCheck version: 1.9.12 (48)
Report generated August 6, 2014 at 7:06:43 PM MDT
Hardware Information:
iMac (27-inch, Mid 2010) (Verified)
iMac - model: iMac11,3
1 2.93 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
ATI Radeon HD 5750 - VRAM: 1024 MB
iMac 2560 x 1440
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 5:12:25
Disk Information:
WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 902.82 GB (631.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 84.56 GB (38.76 GB free)
PIONEER DVD-RW DVRTS09
USB Information:
Apple Inc. iPhone
Logitech USB Receiver
Apple Internal Memory Card Reader 31.91 GB
NIKON D7000 (disk1s1) /Volumes/NIKON D7000: 31.91 GB (28.3 GB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Fitbit Inc. Fitbit Base Station
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
FireWire Information:
G-TECH OEM ATA Device 00 800mbit - 800mbit max
EFI (disk2s1) <not mounted>: 209.7 MB
G-DRIVE (disk2s2) /Volumes/G-DRIVE: 999.86 GB (937.8 GB free)
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] arcana.PRAM (6.1) Support
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
[loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.52) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.45) Support
Startup Items:
ArcanaStartupSound: Path: /Library/StartupItems/ArcanaStartupSound
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.avast.init.plist Support
[loaded] com.avast.uninstall.plist Support
[loaded] com.avast.update.plist Support
[running] com.crashplan.engine.plist Support
[running] com.fitbit.galileod.plist Support
[failed] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.rim.BBDaemon.plist Support
[loaded] com.timesoftware.timemachineeditor.backupd-auto.plist Support
[failed] com.vmware.launchd.vmware.plist Support
[not loaded] com.vsearch.daemon.plist Support
[failed] com.vsearch.helper.plist Support
Launch Agents:
[loaded] com.avast.userinit.plist Support
[failed] com.google.keystone.agent.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[failed] com.vsearch.agent.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.avast.home.userinit.plist Support
[running] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items:
SpeechSynthesisServer
Canon IJ Network Scanner Selector EX
Dropbox
CrashPlan menu bar
Fitbit Connect Menubar Helper
Internet Plug-ins:
Easy-WebPrint EX: Version: 1.1.0 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
AdobePDFViewerNPAPI: Version: 10.1.10 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Silverlight: Version: 5.1.10516.0 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 5.4.2.18903 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.10 Support
npDDRia: Version: 0.0.14.2 - SDK 10.9 Support
EPPEX Plugin: Version: 3.0.5.0 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
avast! Online Security: Version: 9.0.2022.120
1Password: Version: 4.2.3
Dragon Dictate: Version: 12.81.000.006
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
Secrets Support
ArcanaStartupSound Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 840.81 GB Disk used: 252.37 GB
Destinations:
G-DRIVE [Local] (Last used)
Total size: 931.19 GB
Total number of backups: 33
Oldest backup: 2014-03-03 19:34:10 +0000
Last backup: 2014-03-13 00:00:27 +0000
Size of backup disk: Adequate
Backup size 931.19 GB > (Disk used 252.37 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
1% WindowServer
1% fontd
1% CrashPlan menu bar
0% Fitbit Connect Menubar Helper
0% Dropbox
Top Processes by Memory:
164 MB softwareupdated
131 MB mds_stores
131 MB com.avast.daemon
123 MB CrashPlanService
106 MB Finder
Virtual Memory Information:
4.89 GB Free RAM
1.83 GB Active RAM
525 MB Inactive RAM
781 MB Wired RAM
1.96 GB Page-ins
0 B Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\) \\(.+\\)/\\\2x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print($2,$3,a[n],$1)|p;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Calendar in 9.2.1 freezes after working
I had the problem common to many of iphoto freezing after an upgrade from 8. 9.0 worked, but suddenly was not acceptable and update to 9.1 was required. I tried all of the solutions I could find out here. None worked and the entire program continued to freeze. 9.2.1 worked fine to open the program, add pictures, and do the other things I tried and I thought I was over the hump, even though I didn't (and don't ) know what caused the problem. I began a calendar (the project that began all of the problems).. It worked. I exited iPhoto while still in the calendar mode. The quit worked fine. Now I try to open iPhoto, and it goes to the calendar, displays what I have done (very little), and then freezes with the spinning ball of death. I've rebuilt various things (no help), tried to rebuild in iPhoto Library Manager (on rebuild it opens iPhoto names the new file and then just sits...maybe I didn't wait long enough only about 2 minutes), looked to see if I have themes (I have themes, but none related to calendars appear to be there. should there be?), and am now out of ideas. I have version 8.2 and an appropriate library and it works, but no calendars there, but no freeze when trying to creat one. This leads me to believe that the calendar themes might be missing somehow.
I've been trying to get going on an annual holiday calendar for 3 months now. Time is short. I'm not new at all of this, I was an analyst/programmer and helped manage tech support for a large school district. This is the very worst and most problematic issue I've had in my 30+ years of working with Apple products.
HELP!!! Surely there is a solution less cumbersome than installing 9.0 and going through all the upgrades...
Thanks,
Chuck BoodyAnd now I've gone through the upgrades from 9.0 over again. The problem continues....
-
Macbook pro freezes after sleep, after 6 months of not having that problem
Hello,
I'm really frustated with my macbook pro. Like the tittle says, my computer freezes after waking up and the only thing to do is use the On/Off button. It is a macbook pro '13 2010.
This problem first happened around 6 months ago. Around Feb '11, i experienced the same issue. First thing i noticed was that the wifi suddenly stopped working. To try to fix it, I turned airport off and then couldn't turn it back on and had to restart my machine. Then when closing the lid and then opening it again, my computer would work for about 5 min and then freeze. Nothing worked and I had to shut it down using the power button. Then the problem got worse because the computer started freezing randomly. I know it wasn't an application problem because it happened using different apps. I took my computer to an authorized apple service provider and they told me the harddrive had some bad sectors i think, and they replaced the harddrive because I was still under earranty at the time.
Now, Sept '11, the problem came back. First the airport problem happened and now my computer freezes when waking up, the exact same thing that happened 6 months ago. I went to disk utility and repaired disk permisions and still no solution. My warranty expired last month so calling apple won't be of any help. I installed lion the day it came out and was working without any problems until now, so I don't think lion is the problem.
Has anybody had this same problem with their computer? I don't know what to do or how to tell if my harddrive is causing the problem again.
ThanksAll of the new unibody MBs/MBPs can use (6GB 4X2GB)
But yes you should definitely make sure the RAM is seated correctly and you didn't touch the gold part of the RAM during installation. Though if something was seriously wrong it would have made loud obnoxious sounds while you tried to start up.
Aside from Installation issues, you should reset the PRAM as noted previously. Hold down command-option-p-r at startup until it chimes twice.
OP, looking at Super Talent's website they don't even have 1066MHz chips listed in their DDR3 chips. All I see is a jump from 800MHz (DDR2) to 1333MHz (DDR3).
Either way, I can't imagine you got that great a deal for the RAM that even if it is seemingly the correct RAM you can get better deals in the links I posted in my other post. -
I wonder if anyone could help me. I have a 4GB Nano which I purchased about 18 months ago. Everything has been fine until recently. Sometimes when I listen to a track, the iPod starts skipping/jumping. It doesn't skip tracks and it doesn't jump to the next track either. It simply jumps/skips within the track that is playing at the time. The tracks will start to play and then suddenly it will jump to a random point in the song. The jumping/skippig continues until I press stop or until I skip to the next track. Has anyone else experienced this before and what should I do? Should I reset/restore the iPod?
Many thanks.Hey my ipod Nano is doing almost the same thing. I also have a 4gb that is also skipping but it skips numerous songs all at once, and doen't even play the selection at all. It will just keep skipping till it does play a song..... I Konw how you feel.. I hope we can get this problem fixed. Just to let ya know I have tried to restar my nano but it still doesn't work for me.. If you need to know how to reset ur ipod:
1. slide the Hold switch to HOLD and then back to OFF HOld
2. Then Press the Menue & Center Button at the same time until the Apple Logo appers...
I hope this was helpful in some way..If not I'm truly sorry. Good Luck.
Message was edited by: Ladyduke13 -
Power supply freezes after running vi second time
Hello,
I am just starting my adventures in brave new world of LabView and I run into a problem with my first serious vi which is controling CPX400DP power supply and DPO4104 oscyloscope.
What my vi should be doing:
First it sets current levels of both channels of power supply (e.g. 5V on first, 0V on second) and size of the jump (e.g. 0.5V). Then vi should change both current levels by size of the jump and repeat till the current levels of both channels would be reverse to the start value (in this case, 0V on first channel, 5V on second). Also before every current change the vi would save to file mean of measurements out of the waveform from oscyloscope.
What my vi is doing:
At first run it seems that it's doing everything in order (new text file with resonable numbers is created). However, when I try to run the vi a second time my power supply freezes short after few current changes. I can stop the execution of the vi in LabView (it does take a while though) but to successfully run the vi again I must reset my power supply (turn it off and on).
I tried to go around this problem by modyfing the vi in a way that it would do what I want multiple times during running the vi only once but unfortunately that didn't work.
If anyone would have any suggestions about what I am doing wrong or how to help fix this problem feel free to share I don't bite... much But seriously, I'm stuck with this problem for over a week and I'll be glad for any tips
Thanks!
Waldek.
PS Sorry if I am not clear somewhere but I'm not used to talk about programing in English
PSS In attachments are my main vi and two sub vis.
Solved!
Go to Solution.
Attachments:
controling_power_supply_NEW.vi 29 KB
current_changer.vi 17 KB
waveform_reader_saver.vi 21 KBRevan-Ghost wrote:
Thanks for a suggestion Bill but could you elaborate a bit on "try inserting ;*OPC? after every setup command"? I understand what that would do, concept wise, but as a new user I don't know how to do that in LabView. And Good Uncle Google doesn't say anything about " ;*OPC? " and insist on talking about OPC servers instead.
I'm sorry - I was looking at the manual and failed to realize that the missing subVIs from your code were actually drivers for your power supply, so you may not be able to implement this (unless the drivers themselves have the "Operation Complete" capability - hopefully the drivers came with documentation). Else, you may be stuck having to hardcode waits after each command.
If you wrote your own drivers, this is how you would send the command to set output 1 to 1 Volt:
V1 1;*OPC?
The V1 1 sets your voltage to 1 Volt. To tack on another command, you use the semicolon. The *OPC? command forces it to return send a "1." SInce the commands are acted upon sequentially, the power supply can't send the "1" until it is done processing the command to set it to 1 Volt. After that command is complete, the "1" is sent, you read the 1 out of the buffer and move on. This avoids issues where you pile on too many commands at once. I checked the manual and it supports this feature.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all. -
Skipping/Freezing iPods- possible fix
For the last few months my 3G 30gb iPod would just all of a sudden skip all of the songs on the playlist and then turn off. To fix it, i'd have to reset it, which didn't really help. Since then i've tried restoring it with the latest firmware. It's only seemed to get worse. Yesterday it was freezing or hanging for awhile. and i know many of you are having similar issues...
i'm hoping this won't jynx my luck but i wanted to share this with everyone anyway. i restored my ipod back to the 7-15-2004 version of the firmware (the oldest i had). ever since it seems to be a little quicker and i have experienced no skipping/freezing problems yet. i'm crossing my fingers.
if this works, maybe i'll drop it a couple times so it works like it used to.
HTH
EthanSomething like that happened to me!
Read the following link and see how I fixed it.
JC Borges, "iPod updater 2005-09-06 & iTunes 5.0", 11:40am Sep 14, 2005 CDT
BR
JC Borges
Maybe you are looking for
-
Does anybody have a clue as to when the Note II will be available at Costco? I'm starting to feel like an impatient little kid.
-
My iCal alarm works except there is no sound. Just the alarm window with a pulsating alarm clock. Any suggestions? Thanks
-
View both pages of .indd DPS in thumbnail?
If I'm using Bridge to view the progress of .indd pages as DPSs, currently the thumbnails only display the last page of that spread not both pages. Thumbnails of PDFs of these spreads display both pages perfectly. How can I see entire .indd spreads i
-
Bored of every update duplicating contacts in Entourage
Okay, I'm bored with the fact that every time I install an update to I-Tunes or the I-Phone every contact in Entourage is duplicated, including holidays. I now have each day of Ramadan and every other religious or secular holiday showing up 5-6 times
-
Transport Order to 2 TMS Domains
Hello, I want to know how can I transport an order to 2 TMS Domains? I Think I can't do it in the STMS Transaction. But I think I can Call an External Instante, right? to one of the Domains?. Thank you in Advance.