IMovie Importing cuts off during video capture

Hi!
I am in the process of importing a video footage from my mini dv cam tape into iMovie. It seems that iMovie cuts off the video capture after 16 minutes into the duration. I have a 60-minute footage that needs to be captured for iMovie.
Is there a time limit for video captures within iMovie?
Any tips will be greatly appreciated.
Thanks.

Hi
Can it be
- Ken Burns effect
- Zoom in effect
- Image stabilization
All of them enlarhe the picture. Turn them off
- set Crop to ADJUST - and all will be there (letterboxed or columned)
Yours Bengt W

Similar Messages

  • Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?

    Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?

    Read this
    http://support.apple.com/kb/ts1583

  • I use a GoPro 960 30.  When I use imovie it cuts off the feet and the head

    I am using a GoPro at 960 30
    When i use imovie it cuts off the feet and the head.
    how do I prevent that?

    Here are some things to check.
    If possible, set the aspect ratio of your project to the same aspect ratio as your camera. This will be either 16:9 or 4:3.
    If your clips or photos are not the same as your project's aspect ratio, you can select a project clip and
    click on the Rotate, Crop, Ken Burns Tool. FIT will make the movie fill out the screen by Letterboxing. Crop will cut off the edges to fill the screen.
    Finally, you may have analyzed for stabilization, and then had stabilization automatically applied in your project. Stabilization works by zooming in. You can select a project clip and open the Clip Inspector. You can turn off stabilization, or you can move the slider so there is less zoom.

  • How to enable flash during video capture nokia n90...

    Hi-
    How can I turn on or enable flash during video capturing on Nokia n900? Is there a way because I tried to take videos at night and they were unvisible or dim.  I know we can use flash while taking pictures!!
    Thanks

    if your camera settings is on automatic then the flash will be on while recording. that is how mine is set and it stays on.
    everything happens for a reason
    check out my blog @ http://mycellife.blogspot.com/

  • Phone cutting off during call

    My Curve cuts off during a call and the battery is drained even if I had a near full battery.  If I plug it up to a charger it turns back on automatically if not I have to remove the battery and put it back in.  Has anyone heard of this problem before?

    Welcme to the frums
    Can you look and see what your free memory says..
    MAIN SCREEN
    OPTIONS
    STATUS
    FILE FREE 
    Report back your numbers
    Thanks
    Nurse-Berry
    Follow NurseBerry08 on Twitter

  • Phones cuts off during call

    On the iPhone 5 call cuts off during call

    Hello Minichop1803
    Check out the General phone and connectivity issues to troubleshoot issues with call connectivity with your iPhone.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Regards,
    -Norm G.

  • Phone cutting off during calls

    Hi, I hope someone can help, for the last 2 months my phone has occasionally cut off during calls, for seamingly no reason, full signal full battery. For the last 2 weeks it has cut off on every call. Does anyone know how to fix this please its driving me crazy. x

    It's most likely something you should talk to your wireless service provider about. If it's not a network problem they may be able to swap sim cards for you, and if that doesn't help, possibly exchange the device.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Audio cuts off then video moments later for Jabber users when content is shared during a multipoint VC

           If a presentation* is being shown from a VC end point/or by Jabber, the audio cuts off, then the video of the Jabber user freezes. The call has not ended on our end we can still hear and see them. A few moments later their video on our end freezes and the audio is lost. The call is finally terminated a few moments after.
           When this happens to the Jabber participant they either have to restart Jabber or in some case have to reboot their PC
           The Jabber participant can be cut off from their class 2 to 3 times  throughout the duration of the class
           This happens over all the MCU\blades, so doesn’t  appear to be blade specific
           Only appears to happen in multi –point conferences not in point to point calls
    *Presentation: This can be anything from a word document, to a PowerPoint presentation to a web browser
    The warning they receive says:
    The application has encountered a terminal problem.
    Location:
    Message: assertion failed. (link_ret = = GST_PAD_LINK_OK)
    Domain: <no domain>

    Is this problem specific to Jabber clients, or Jabber Guest? If the former, you'll have better luck over on the Jabber client forum:
    https://supportforums.cisco.com/community/4551/jabber-pilot-support

  • IMovie iDVD cuts off left side and bottom of pics/vids of TV screen

    For as long as i have had iMovie, I have always had this problem where the left side and bottom of the pictures and videos are cut off and cannot be seen on the TV screen. If there is anyone out there who knows something about this, has an answer, or even a suggestion, it would be greatly appreciated if I heard back from you. I have a Mac OSX 10.0 and have iLife 06 if that helps. Thanks a lot.
    Mike.

    Hello Mike,
    a bit of "cropping" is normal - it's called overscan - but you say that the it occurs only at the bottom and left side .... are you sure it doesn't affect the whole picture? If I'm wrong post back with some more details about your footage and workflow.
    Also: does this only ocurr on DVD or also if you play from iMovie through to camera?
    The TV Safe Area:
    Anything within the outer 5% of your frame is going to disappear when viewed on a TV ( e.g. Rolling Credits). Inside this 5% is known as the Action Safe area and is produced by a TV behaviour called overscan. Anything within the outer 10% of your image area is not displayed as clearly as the part of the image within that border. The "sharp" 80% of your TV monitor is known as the TV Safe area.
    NOTE: "TV Safe" only applies to video shown on a TV set. On a computer monitor, this can be pretty much ignored
    hope this helps
    mish

  • Color shift during video capture (moved from Nseri...

    I have noticed that the video camera in my n79 is very sensitive to changes in light.  Often I get a major color shift during a video capture seemingly for no reason, especially when shooting outside.  Is this a defect or should I use a particular setting for video? Current settings are:
    quality: High(TV);
    scene mode:Auto;
    video light: off(shooting video outside during day);
    white balance: Automatic (this MIGHT be the culprit?);
    Color tone:Normal.
    Two stills from the same video are attached; the second, a few seconds later, is unnaturally vivid (almost day-glo!).
    Thanks for any suggestions.

    Wow, what a quick reply!
    Delivery was going to be Quicktime HD and probably downconvering to SD MPEG2 for a DVD. I was just going to edit in HDV, since I'm not doing anything fancy, just to try it out as a workflow option (and previews for the client). The first couple of projects I've started on my Macbook Pro though have had this hue shift (I can post an example on-line if need be by filming my monitor...) It's not inherent in the actual captured QT file, just when being played back in FCP. When I export out of FCP the QT file looks great as well. I've never had this problem on my G5 tower with HDV from the same camera or captured the same way. I'm worried that it's the univeral copy of FCP or even worse, my Macbook!
    Make sense?
    Thanks

  • Half a chime (cuts off), no video, no boot

    My G5 just crashed launching a Protools session. It will no longer boot. It chimes - but the chime sound is cut off half way. The fans power up and I can hear the drives spin up. I've removed PCI cards, swapped drives, swapped RAM... nothing helps. No video, no response from the keyboard (trying a PRAM reset for example).
    Did I just loose a logic board? Any suggestions would be much appreciated.

    more info:
    It just booted after letting it sit for almost an hour.
    Passed Techtool hardware tests. I just started another loop....
    Crash!
    Just shut down with no display or fans - light still on though.
    Something overheating here? I'm hoping someone has an opinion as to logic board or CPU failure - or something else (temp sensor?).
    Any help or comments would be very much appreciated.
    What the...
    I hit the power button (expecting it to either shut off or make me hold it for 10 sec ts shut down) and it acted like it woke from sleep and continued with the Techtool test where it left off.
    Then it shut down again after 15 sec or so.
    Repeat... same.
    Opinions please!

  • Songs cut off during play

    I have 2nd gen iPod touch. When I play it through a USB cord it cuts some of my purchased songs short. My husband has 3rd gen and he has no trouble when he plugs his in with the same cord into the same device. The songs I have trouble with play fine. What could be the problem? I'm using both iPods in Microsoft Sync in my Ford

    Apparently this problem hasn't been fixed in 8.2 (so I won't be upgrading). I'm very familiar with this problem, even though my iPod Classic is only four months old. I've finally gotten all of my songs to work (it took two months to cycle through my entire collection to determine which ones were broken).
    This post contains the solution for songs cutting off on the iPod: http://discussions.apple.com/message.jspa?messageID=9333313#9333313. Also read [this thread|http://discussions.apple.com/message.jspa?messageID=9477739#9477739]. Now, if the songs are ending early in iTunes playing from your hard drive, then the original file got corrupted by iTunes and the only fix is to re-import or use a backup copy.
    At this point, I don't want iTunes to touch my music files for a large transfer. I keep my music on an external drive; if I were to have to move them from that drive to another drive for some reason, I'd rather bite the bullet of losing my date-added data and use the Finder to move the files and then re-import my Library file than follow the iTunes instructions.

  • Songs cutting off during playback

    Hi. I'm having issues with songs cutting off approx. 30-45 seconds before the actual end of the song. This is occurring in iTunes and on my synced devices, on songs uploaded from CD and on a high percentage of purchased songs. Any ideas how to fix - other than delete my entire library and start over???

    I've had the same problem and found an easy solution.
    I remembered the skipped songs and marked them in iTunes. Now right click on them and choose convert to AAC (or MP3...whatever).
    Then the songs will be imported to the iTunes folder. After that you can delete the older ones, so that there are no songs twice.
    The reason of the skipping is, that iPod nano has problems to play some (unknown) coded MP3 songs. So when you code them by importing them with iTunes (as said above), then the iPod will play them perfectly (mine does so).
    Hope this will help.
    Chris

  • Abruptly cuts off during startup

     I have a Lenovo 3000 N200 0769 BWG and have been having a lot o fproblems alately. My laptop started ABRUPTLY cutting off (like power loss) during wake from sleep or normal startup. Always just as it got to the windows screen. You also notably heard the HDD click as power was cut.
    *this happens even if laptops cold
    *laptop does get noticably hot- it didnt used to.
    *Also thoroughly cleaned it out with compressed air. No difference
    *ASSUMED it was HDD failure so installed new HDD 320GB and bought Win7 ultimate - ok at first then started doing it again (i think after updates*)
    *when going through the failed startups, it eventually loads the startup repair, identifys some faults and mentions "bad-driver", then it will startup fine... until restarted/shut down again!
    Also in my device manager I have two "BASE SYSTEM DEVICE" listed under other devices. Windows cannot find device drivers.  -- I would like to know what drivers I need for these or what they are please?
    Ive tried disabling those two devices via device manager then restart but get same problem.
    Really in need of some help with this as I cannot afford a new laptop.
    INFORMATION FROM ACTION CENTRE
    Some of the errors I've had relating to this:
    windows failed to start because of missing system files
    windows failed to start because of a problem with the hard disc
    windows was not able to determine the cause of the problem
    these messages are logged after the failed startups where it cuts off and these is always a "windows was not properly shut down" message before them
    Really need some real Lenovo Tech help on this please!
    Will, England

    Not sure if this helps, but, I've experienced similar problems.
    Computer shuts down suddenly and randomly.
    Boot always takes three attempts, everytime.
    Corrective action so far:
    Restored computer to factory state (used Lenovo recovery utility)
    No improvement - still shutsdown .
    Next step - update BIOS - found an update on the Lenovo support site.
    I look forward to any other suggestions from others.

  • Phone Cuts Off During Calls and Jumps to Facetime & Speaker Phone

    My Mom's IPhone 4, during phone calls, constantly cuts off (doesn't register as dropped calls though,) jumps into facetime and jumps into speaker phone for no known reason.  She has taken it to the Apple Store Support Team three times.  The first time she was not treated nicely and was told nothing was wrong, the second time I went with her and they wiped her phone clean and started from scratch and the third time she bought a brand new phone.  None of these options have worked and the problem persists.  This is her fourth IPhone over three years of no major issues until now, so I don't see why this would just start happening for her in the last year.  Are there similar issues like this in the community and does anyone have an idea how to solve it?

    I'm sorry for misunderstanding you, but you said she went to the Apple store and the third time she bought a new phone. Did the new phone work then? Is the issue still persisting on the old device? That's where I'm confused. Did she get the device replaced or just buy a new phone and the problem is still happening on the old device.

Maybe you are looking for

  • Multiple iCloud mail accounts on one computer

    We had a family pack on mac.com and when we moved the accounts to icloud (on  the same mac), the mac can no longer get email from one of the accounts... icloud is not accepting the pasword for this account - however, withut making any changes to the

  • How to monitor progress of web-service calculation?  And abort it?

    Hello. We're thinking of converting an existing Java radar calculation program into a web-service, so that it can be used by various interested parties. However, calculations can take some time (several minutes) and so we would like the client to be

  • I can't get rid of browser malware?

    Okay, so, this is a big problem I've been having all day, and only today. Suddenly, as I was browsing, I started getting ads. I thought it was because my adblocker was disabled. I re-enabled it, and suddenly, I still have ads. So I thought, hey, mayb

  • Calling adapter module in PI7.1

    Hello, I have migrated an adpater module from XI3.0 and deployed it successfully, but I get an error ("Object not found") at runtime. I have the suspicion that the expression I use in the com channel for referencing the module is wrong. The module sh

  • Using iDVD 5.01. Adding pictures to slideshows.

    Good evening, I am having problems adding certain pictures to a slide show that I am creating. The program allows me to drag and drop some pictures but not others. All the pictures are from the same camera and the same format (JPG) They are not all i