IMovie installation does not end
When I open a session, iMovie's status is 'to be updated' in AppStore.
When I click to update it, the process begins and nevers ends. The status in AppStore is 'installation'.
Any idea to know how to proceed ? (purge sthg ? remove imovie before update or else ?)
Thank you.
Is there any activity in SM50 related to this patch activity?
If not,go to se38 and run RDDIMPDP,RDDNEWPP and RDDPUTPP .
and check in SM50 again.see the slog,plog in /usr/sap/trans/log directory,you will get some idea abt whats going on.
Similar Messages
-
Patch installation does not end
Hi All,
I was succesful in installing a BI_CONT 703 add-on on Solution Manager 4.0 . I was updating the patches to patchlevel 2. The Process is still running since 3 hours and is stuck in Main import finished with returncode 4. It is not giving any error or not even finishing the update. Please advice what should i do.
Any help will be appreciated.
Thanks,
FahadIs there any activity in SM50 related to this patch activity?
If not,go to se38 and run RDDIMPDP,RDDNEWPP and RDDPUTPP .
and check in SM50 again.see the slog,plog in /usr/sap/trans/log directory,you will get some idea abt whats going on. -
Weblogic 10.3.2.0 installation does not pick the right JDK
The installation does not pick up the right jdk version that is jdk 11.6.0_11 . Although the machine is running the same. Instead it picks up jdk 1.6.0_14. have tested the machine many times. I am Installing Oracle SOA Suite 11g.
Inside "startWebLogic.sh" file add the JAVA_HOME like following (just below the "setDomainEnv.sh" call):
JAVA_HOME=C:\bea103\jdk1.6.0_17
See if this helps.
Thanks -
I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?
You need to contact the developer/manufacturer directly to determine if their product is compatible w/Yosemite. It is not listed on their system requirement website:
Mac OS X 10.9 Mavericks
Mac OS X 10.8 Mountain Lion
Mac OS X 10.7 Lion
Mac OS X 10.6 Snow Leopard*
Note: ArchiCAD 17 is the last version of ArchiCAD to support Mac OS X 10.6
Only case insensitive file-system volumes are supported.
http://www.graphisoft.com/support/system_requirements/archicad17.html -
i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this
Try downloading the trial. It ought to detect that you have a 64-bit system.
You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it. -
Unable to install photoshop elements 13 on new computer (Windows 8.1 OS). Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html -
i am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.
download the 64bit installer,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Execution does not end even after all records updated..
Hi,
I have plsql code like :
declare
begin
for x in ( select .......) loop -- about 4000 times
for y in ( select ............) loop -- about 50 times
end loop;
-- some code goes here to manipulate clob data
-- like creating free temp clobs - use - then free them
-- Update statement that update some table using clob values.
insert into tablex values(sysdate);
commit;
end loop;
end;
Here I can monitor from other window howmany records are inserted into tablex and howmany updated in update statement by...
select count(1) from tablex;
After 50 mins i can see that all records are updated but...
plsql code does not end its execution it continues even after all records are updated..untill i have to kill the session or let be run for long time.. :(
I can not understand why this it is not ending execution..
What could be the problem ...Hi,
Here it is.....
declare
v_text_data TableA.text_data%type;
v_clob clob;
type dummyclob_t is table of clob index by binary_integer;
dummyclob dummyclob_t;
v_str varchar2(255) := 'ddfsajfdkeiueimnrmrrttrtr;trtkltwjkltjiu4i5u43iou43i5u4io54urnmlqwmreqwnrewmnrewmreqwnm,rewqnrewqrewqljlkj';
begin
select data bulk collect into dummyclob from sfdl_clob; -- five rows containing clob data upto 1MB
for x in (select object_id
from TableA
where object_type = 'STDTEXT' ) loop
dbms_lob.createtemporary(v_text_data,TRUE);
for y in (select '<IMG "MFI_7579(@CONTROL=' || ref_id || ',REF_ID=' || ref_id || ').@UDV">' temp_data
from TableB
where object_id = x.object_id) loop
v_text_data := v_text_data ||
case
when trunc(dbms_random.value(0,7)) = 0
then chr(10)
else v_str
end ||
y.temp_data;
end loop;
select text_data into v_clob from TableA where object_id = x.object_id for update;
if v_text_data is not null then
dbms_lob.append(v_clob,v_text_data);
end if;
dbms_lob.append(v_clob,dummyclob(trunc(dbms_random.value(1, 6))));
dbms_lob.freetemporary(v_text_data);
insert into xyz values (sysdate);
commit;
end loop;
end;
Thanks for your time..:)
Rushang. -
When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA
You can try downloading the 64 bit version. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html -
Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."
Nobody can tell you anything without proper system info or other technical details. We don't even know what exactly you are trying to install.
Mylenium -
How to remove records in itab where its HKONT does not end in '0'...
Hello Experts,
I am getting records from BSIS and BSAS and I want to remove those records with
their HKONT(GL account) does not end in '0'(zero). I do now want to do it via a loop.
I tried using DELETE FROM ITAB statement but it seems it does not work.
Here is what I did:
IF NOT gt_bsis_bsas[] IS INITIAL.
DELETE gt_bsis_bsas WHERE hkont+10(0) <> '0'.
ENDIF.
Hope you can help me guys. Thank you and take care!Hi Viray,
'+' is a wildcard char which is used to represent one char
where as '*' represents any number of char's.
In this case +++++++++0
<b>means that the length of the field is 10 chars and first 9 can be anything</b>
he didn't use '*0' since it could mean that the length of the data entered can be anything .
Hope this clarifies
Regards
Nishant -
Excel process does not end properly
Hello All.
I am using excel in my program writing data into it an excel workbook and then later on reading data from it. I have written down the code of closing excel worlkbook and shutting down excel application hence releasing the handles for it. But when i do that i.e. when the code containing excel workbook closing and excel application shutting down executes, excel workbook is closed but excel process does not end properly and can be seen in the task manager. And when i repeatedly open the excel file through my front end interface and close the file, another excel process is added in the task manager which does not end and so on. What can be the problem and solution. Thanks in advance.
Best Regards.
Moshi.Interfacing to Excel via ActiveX may be tricky, ending in situations like the one you are facing now.
The basic principle is that every single handle opened to an Excel object (workbook, worksheet, range, variant and so on) must be closed properly for the entire process to terminate gracefully. If a reference remains unhandled at program end you will find an instance of Excel remaining in the task list and you may suffer erratic behaviour in subsequent accesses to the product.
You must double check all references and add approporiate dispose/close commands for every one of them.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
Process does not end when binding a object to registry
I am writing a Unit Test case in which i need to create a datasource and bind it to RMI registry so that the methods i need to test can get a database connection . The problem is that after the test cases have finished running the process does not end and i have to shut it down manually . When i do not bind the datasource , the process ends put with errors because the methods do not get a connection. Even unbinding it after running the test cases does not help.
Edited by: gurpreetbhalla on Jun 25, 2009 11:56 AMpublic void testIntraDayForClient() throws Exception
ConstantConfig.JNDI_FACTORY = "com.sun.jndi.rmi.registry.RegistryContextFactory";
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.rmi.registry.RegistryContextFactory");
env.put(Context.PROVIDER_URL, "rmi:");
InitialContext ic = new InitialContext(env);
// Construct DataSource
SQLServerConnectionPoolDataSource ds = new SQLServerConnectionPoolDataSource();
ds.setURL("jdbc:sqlserver://10.200.41.201:1433;databaseName=TradeportTC");
ds.setUser("sa");
ds.setPassword("superuser");
DataSource d = ds;
ic.unbind("TCDB_JNDI");
ic.bind("TCDB_JNDI", ds);
HttpServletRequest req = new MockHttpRequest();
HttpServletResponse resp = EasyMock.createMock(HttpServletResponse.class);
ActionContext context = EasyMock.createMock(ActionContext.class);
HttpSession session = EasyMock.createMock(HttpSession.class);
EasyMock.expect(session.getAttribute("ZephyrUserName")).andReturn("sclient90");
EasyMock.expect(session.getAttribute("ZephyrDomainId")).andReturn("8a48a9cb1860e2a4011860e2c64d003a");
EasyMock.expect(session.getAttribute("isTrader")).andReturn(false);
EasyMock.expect(session.getAttribute("accountsDataDB")).andReturn(null);
EasyMock.expect(context.getSession()).andReturn(session).times(12);
session.setAttribute("vawTrades", null);
session.setAttribute("noOfDays", null);
session.setAttribute("accountNo", null);
session.setAttribute("exchange", null);
session.setAttribute("symbolName", null);
session.setAttribute("trCode", null);
session.setAttribute("status", null);
session.setAttribute("accountsDataDB", null);
EasyMock.replay(session);
EasyMock.replay(context);
MyOrdersAction action = new MyOrdersAction();
action.execute(req, resp, context);
This is the unit test case which does not exit , if i skip this binding ic.bind("TCDB_JNDI", ds);
then it exits normally with a failure, -
When my downloading until 80%, appear Installation error, "Window installer does not permit updatating of managed advertised product. At least one feature of the product must be installed before applying the update."
What product and version number are you talking about. Is it a trial version, or is it the full or subscription version. If the latter, activate the product with your S/N or Adobe ID and then do the updates.
-
Hi all,
I noted that SAP R/3 session does not automatically ended after a user logs off from the ESS Frontend. This will result in a increase in session in SM04 eventhough the users had logout from the portal.
I have adjusted some timeout parameter in transaction RZ10 in R/3 including rdisp/plugin_auto_logout and restarted the services. To test, i accessed the ESS Portal and access some IAC IVIEW. Thereafter, i logged off the portal and observed the session created in R/3 (SM04) and noted that the session including the RFC connections are not released at all.
Anyone face this issue before? How can i control so that after the user logoff from the portal, the session in SM04 is end.
Thanks in advanceHi Sean,
I found some note on the session which i attached below. However in my EP server have dozens of web.xml. Which one should i configure? Would you able to help me on this? Some of my IAC view does not end while some do. Any idea on that?
Specifying HTTP Session Timeout
Use
You can specify a timeout period for HTTP sessions created in your Web application. If the session is inactive for this timeout period, it is invalidated by the Web container.
If you do not specify such a timeout explicitly, a default one of 30 minutes is assumed.
You can configure the HTTP session timeout using the web.xml descriptor.
Procedure
On the web.xml screen, proceed as follows:
1. Open the General screen.
2. To specify the timeout period, enter a value in the Session configuration Session timeout field.
The value is specified in minutes. If you enter a negative value in this field, HTTP sessions are never terminated because of a timeout. Instead, only an explicit logout by the user will terminate the corresponding session.
Maybe you are looking for
-
Sharing a NAS drive between 2 PCs running itunes with different accounts....
I have 2 Windows 7 PC's with different iTunes accounts, both accessing the same NAS drive for their save location. 2 Questions: - 1 - How do I stop them from reverting back their default save loaction ( from "z:/itunes/itunesmedia" to "c:/user/music/
-
My class and I are having some problems with the java sdk1.4.1. I have it install on a win 98 SE, two of my class mates have it installed on win XP, and it works fine on both. we now have it installed on win 2000. Can someone please tell me why this
-
Problem in exporting Datas to Adope
Hi Experts, I have not install SAP Interactive forms.I want to generate some reports in Adope.How can i achieve this.I came to know it is possible through XML and XSL but i need a procedural guidance how to generate . Regards, Ramanan.P
-
Does itunes support intel x3100 graphics for watch video and tv shows in itunes: not working
Hi I have a asus p5k-vm motherboard with intel 3100 onboad graphics accelerator. I had a gtx 570 video card install and was using itunes to watch video and tv shows. I sold my gtx 570 and I am using intel x3100 onboard graphics accelerator as my vide
-
Vmware wsx is it possible to configure language for keyboard like AZERTY ?
vmware wsx seems to be wonderful application for the future but it is possible to configure keyboard for differents countries like French...