IMovie isn't rendering Ken Burns Effect

I am trying to apply the Burns effect to a photo in iMovie. The clip appears in the timeline but there is no red bar advancing along the bottom of the clip indicating that the effect is being rendered. Any idea what is going on here?
Thanks,
Chris

Is the project stored on an external drive? If so, check to be sure the drive uses the Mac OS Extended disk format. When not that format iMovie can't reliably save to the disk, so rendered clips aren't saved as they should be.
http://discussions.apple.com/message.jspa?messageID=4176921#4176921
If that's not the problem, rule out third-party QuickTime add-ons and iMovie plug-ins that may be messing up QuickTime.
http://discussions.apple.com/message.jspa?messageID=4030731#4030731
Karl

Similar Messages

Imovie 10.0.1- Ken Burns effect do not work

imovie 10.0.1- Ken Burns effect do not work

Is the photo you're trying to apply the Ken Burns effect to in a Project? It won't work if it's just in an Event.
More details here:
http://help.apple.com/imovie/mac/10.0/#movc6e02f503
http://help.apple.com/imovie/mac/10.0/#mov26d3f6a6c
Matt

IMovie 10.0.4 Ken Burns effect missing

Using iMovie 10.0.4 on an iMac running 10.9. I selected Adjust, Crop and only have options to rotate or crop. I tried this on various clips - new and old. No options

Is the photo you're trying to apply the Ken Burns effect to in a Project? It won't work if it's just in an Event.
More details here:
http://help.apple.com/imovie/mac/10.0/#movc6e02f503
http://help.apple.com/imovie/mac/10.0/#mov26d3f6a6c
Matt

Rendering Ken Burns Effect

So I just got a new imac yesterday Aug. 5th 07 and trying to my 1st iMovie, and everytime I try to use the 'Ken Burns Effect' on photos I've taken with iPhoto it just sits there and does not render. (red bar at bottom of photo) and if I try to exit it says it needs to render clips or lose changes. So i've updated to the latest version of iMovie etc. open/closed, rebooted, created new projects...nothing works. HELP!

Hey I had a similar situation. I too purchased a 20" iMac around Aug 1, 2007. For some reason, in iMovie HD (6.0.3) every time I used the Ken Burns affect, my footage wouldn't render! I'd just see a burgundy red line, that didn't move. Oh so frustrating.
Getting the latest QuickTime Update fixed the problem. Don't know how, but it did.
-Michael

IMovie for iPhone 4 - Ken Burns Effect Issue

If I move the timeline to the start of my clip, the Ken Burns Start button is not available but the End button is. Start shows up at the end of my clips.
When at the start of the clip then start should be available and at the end of the clip then End should be available. By it being reversed, this causes me to make my effects backwards of how I intended them to be.
Is this a software bug or do I just not understand how to work this editor?

Resist wrote:
... iMovie for iPhone 4
to quote our forum's host Eric W.:
The forum for iMovie for iOS 4 devices can be found here
http://discussions.apple.com/forum.jspa?forumID=1379

That darn Ken Burns effect

I started a thread in the iPhoto forum, and got my answer. However, it opened up a new question which led me here. This was my original question: "I am losing it here trying to simply drag a photo from iPhoto into iMovie without it coming in with that #$@**Ken Burns effect. I cannot find any way to turn it off, except in a slide show. I don't have or want a slideshow. I just want to use still photos in iMovie. (Both are version 6, running OS 10.4)" As I said, I did get my answer, but someone also said this: "iPhoto just gives you the Picture. It's iMovie that supplies the ken Burns effect."
So now my question is, what can I do on the iMovie side to NOT apply the effect when dragging photos in from iPhoto?
Right now I am having to select each photo in iPhoto, in the media bin, uncheck Ken Burns, save it, then import it.
Any help? Thanks.
Regards

Ben
That was brilliant! Shout it to the world. Not only did each subsequently dragged photo hold the effect of the first, but I had the ability to move the content of the photo within itself (as though the pan and zoom effect was there but fixed as I want it to be).
Great. Thanks.
noodlehead - hapPY

How come sometimes the Ken Burns effect allows you to edit the entire picture, and other times it automatically starts at a smaller section of the photo?

How come, in imovie, when adding the Ken Burns effect to a still photo, sometimes the phoo appears as the full size, and other times, the green and red ken burns boxes appear only on a smaller portion of the picture? I want to be able to Ken Burns a bigger chunk of a picture, but often times it is as if there is a pre-set for just how much the Ken Burns will cover.

Is it possible that the ones that have small boxes are in Portrait while the ones with large boxes are in Landscape?
If so, you can get bigger boxes on the Portrait ones by clicking "Allow Black" in iMovie 11. (iMovie 09 did not have this feature.)

Ken burn effect.

Hi everybody.....Iam kinda new to fcp..in imovie they have the ken burns effect for still pictures...how do you get that effect in fcp???
Thanks,
John

Very easily.
Watch my Movement on Stills Tutorial on this at the Creative Cow.
Shane

IMovie Crashing when importing photo with Ken Burns Effect

iMovie is crashing all the time when I am trying to import a photo with Ken burns effect using media browser and hitting "apply". Is this a known problem ? If I dont apply Ken Buruns effect then it imports it fine.
I am trying to put Photo at the begining of my project ( and then put title on that photo). If I have any clip in the begining and then try importing photo with ken burn's effect then it is not crashing, but it still does not import it. I click "apply" and it does soemthing , I can see the clip in timeline for a sec and then it disappears. So either way, cant use any photos anywhere with Ken Burn's effect. Whats going on?
I have more than enough space available on my HDD and I do not think there is any conflicting QT plugins I have ( It's all default Install). This is so consistent that it seems like a Bug but can't find this exact case mentioned anywhere in discussions.
Powerbook G4 12.1" 1.5Ghz Mac OS X (10.4.5)

Welcome to the forum! And thanks for such an insightful post.
I have two guesses here:
o The Ken Burns code of iMovie has a problem with partitions
o The Ken Burns code of iMovie has a problem with access rights
I've never seen a Ken Burns problem with partitions (I've used multiple partitions for years with no problems). I suspect that's not the cause.
But I think you've hit the nail on the head that iMovie may have a problem with permissions/access rights. I don't know exactly what the problem is — or whether it's caused by iMovie or OSX — but there is behavior that suggests something isn't right.
I suspect the issue, whatever it is, causes a failure to save the rendered Ken Burns clip inside the project package. The red bar runs, but the rendered clip isn't saved to disk. My guess is OSX refuses to allow iMovie to save the file for OSX doesn't believe YOU have permission.
One would think that using the Finder to set the permissions of the project package would solve the problem, but it doesn't seem to.
There are two possible solutions:
1. Set the partition to ignore permissions. In the Finder, click on the partition and Get Info. Turn ON the checkbox "Ignore permissions on this volume";
2. Use Disk Utility to reformat (erase) the partition. Somehow that seems to fix the problem.
Here's some history which may suggest another solution: In an earlier version of iMovie a similar problem occurred, where iMovie would refuse to open a project. It had somehow decided you didn't have permission to edit the project.
The only solution was to use the Finder to create a new set of project folders — a folder and all the folders it normally contains — then Option-drag the FILES of the original project folder to the appropriate folders. (Option-dragging COPIED the files instead of moving them.) The new project folder would now open normally.
If you are adept at working with packages, you might try creating your own package (which contains all the normal folders) then Option-drag the files of the problem project to your package.
Once I saw an error -52 announcement, but it was not reproducible.
Error -52 is a "Get file position error", which (may) suggest a disk directory error. That may be a disk issue unrelated to iMovie. You might want to consider using Disk Utility to Verify/Repair that partition.
I have a separate partition for the movies and made a
link from my home account to the directory with the
movies on that partition. iMovie works correctly
except for the Ken Burns photo rendering.
I'm never sure whether creating such a link is a good idea or not, especially for the iLife apps. Some apps don't resolve the alias as they should, which creates other problems. A "Movies" alias sends iDVD a million miles beyond Jupiter, for example, where the iDVD project joins the space dust.
For iMovie projects saved on partitions and external drives, I just save them inside a "iMovie 6 Projects" folder on that drive. (Every new version of iMovie gets a new folder.) For convenience, I may create aliases to help navigate there, but do nothing else. Everything just works.
If you figure out something new, please say.
Karl

Ken Burns Effects Don't Work in iMovie HD (I've Tried Everything)

Version:
OS X 10.4.10
iMovie 6
*Hardware 1:*
PowerMac G4 Dual 500 Mhz, 1GB RAM, Internal 40GB HDD and Internal 320 GB HDD
*Hardware 2:*
PowerBook G4 500 Mhz, 512MB RAM, Internal 20 GB HDD
Problem:
This problem occurs on both of my G4 Macs. In iMovie HD, I imported a JPEG from iPhoto with Ken Burns Effects on. The still photo appeared properly in the Clip Viewer initially, but appeared as a black screen in the iMovie Monitor. Once the imported photo with the Ken Burns Effects completed rendering, the clip in the Clip Viewer turned white and appeared as a white screen in the iMovie Monitor. I have tried almost everything I read about in these forums in search of a resolution.
*Resolutions that Failed:*
1. The photo is definitely a .jpg
2. Tried importing the actual .jpg file as well as importing from iPhoto.
3. QuickTime and all other Software updates have been applied and are running on the most current release.
4. Repaired disk permissions.
5. Created, saved and manipulated the iMovie file in the standard Movie Folder on my main internal hard drive. (i.e. – I'm not saving to an external HDD)
6. Created, saved and manipulated the iMovie file in the standard Movie Folder on my secondary internal hard drive. (i.e. – I'm not saving to an external HDD)
7. Deleted the 'mac.imovie.plist' file and created a new one.
8. Attempted to do apply the effects logged on as a different user.
9. Saved file, restarted machine and reopened numerous times but the problem persists.
10. Tried a lower resolution photo and the problem persists.
11. Attempted to import all the photos I planned to use, added transitions to all of the clips and rendered completely. Saved the file, restarted the machine and reopened the file with no change to the blank clips.
12. The iMovie trash emptying issue did nothing to help.
*Additional Notes:*
1. The problem is confined to the Ken Burns Effects in iMovie. I am able to work with true video clips without incident.
2. Ken Burns Effects operate properly in iPhoto 6 using the slideshow functionality.
3. I would use iPhoto, but it seems like it would be easier to line up specific sections of an audio track with certain Ken Burns Effects in iMovie. (i.e. – a crescendo at the 16 second mark of the audio track coincides with the end of a 'zoom' on a photo, transition from second 16-17 second mark, new photo at the 17 second mark and pan left to right from 17 second mark to the 25 second mark.) Point is that it lines up precisely with the markers on the audio track, which seems far easier to do in iMovie than iPhoto.
4. Please help me, I'm going nuts troubleshooting this bug! I can't find any resolution that works.
Thanks in advance for the help.
Message was edited by: Charlie Brown Jr.

Hmmm. You seem to have tried, without success, most if not all of the methods of resolving a Ken Burns black screen issue.
Some thoughts that have occurred to me:
1. Perhaps your G4 500mhz Mac is not fast enough. I think that the minimum spec for iLife '06 is 733mhz. Might have nothing to do with this problem, but I just mention it.
2. Are the sizes of your images too large, as can happen with some of these new high def cameras? iMovie has trouble working with very large images.
3. Do you have any 3rd pary plug-ins, particularly in Quick Time, that could be causing a conflict?
4. Do you have enough disk space for the project to operate?
5. Have you done a recent Quick Time update? Some users have reported a problem with that.
6. From your post, it appears that you have continuously worked within the same iMovie file that exhibits the Ken Burns problem. If this is true, try creating a new iMovie project and experimenting with a few clips to see if the problem persists in the new project.
Ken Burns issues can be very frustrating. I think that you will need to keep trying things until something works. Wish I could be more help, but perhaps some of the tech experts on this forum will have some workable suggestions.
There is an application called Photo to Movie that reputedly has a far better Ken Burns type of effect. If you can't resolve your problem, you might try downloading that app. I believe that it offers a demo download.
Good luck.

Imovie will not render photos with ken burns effect

I have started to produce a video and have tried to import photos from both iphotos and straight from desktop however when i do this the red bar showing the state of rendering does not move. The photo will not render and therfor i am unable to use the ken burns effect. Could anyone please give me any idea of what i am doing wrong.
Thanks.

Hi
What file type is Your photos eg .tiff, .pict or .jpg ?
What size are they eg 1Mb, 10Mb or 100Mb ?
How much free space is there on Your internal (start-up) hard disc ?
Ps When ready - Don't use Share/Export to iDVD from within iMovie. Just drop Your movie icon
(with a Star on it) into iDVD theme window.
OR - Your movie project in iMovie will be harmed and You'll have to re-do it ! ! AND
the DVD disc will be severely pixelated - extreme low quality Ds
Yours Bengt W

I have an older version of imovie. After I change the photos using the Ken Burns effect and save them, the next time I open the file and click 'show photo settings' to change the zoom, the picture appears black and I can't change the zoom?

I have a five year old version of imovie that generally works fine. However, when I add a photo using the 'Ken Burns' effect then save the movie, the next time I open the file and click 'show photo settings' the picture appears black and I cannot change the zoom. Any suggestions?

Have you rendered both iOS 7 and iOS 8 (both of which will work on your iPhone 5) out of the question entirely without trying every possible configuration? The animations can be disabled entirely, if that's the problem. And if the whiter-brighter user interface is the problem, there's reverse-contrast modes that darken everything. You can expose accessibility controls to gain immediate access to these functions to toggle them on and off. I guess my point is you may have decided against upgrading the OS based on an early experience with iOS 7 when Apple has since made changes in later revisions to address some of the usability complaints.
Now, Apple's instructions for downloading older versions of apps is to do so from the Purchased list, not from the app's product page.
See here:
Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support
Let us know how that works for you.

Imovie templates, titles, ken burns effect wont render. why?

Hi I am having great issues.
Once my templates or ken burns effected pictures are in a timeline they wont render. Ive tried everything, but no rendering takes place. Just sits there and does nothing.
Ive even tried wiping imovie and reinstalling still does the same thing help!!!

Hi gregles76 - welcome to the forum!
Two possible angles on this:
1. You are not applying the KB effect correctly - make sure you are following the procedure shown in this tutorial:
http://www.apple.com/ilife/tutorials/imovie/im3-2.html
2. Were you trying to change the setting on photos that already have a KB effect applied? If you were, and you have emptied the iMovie trash after creating KB effects on your photos, you will not be able to further modify the setting, because of the way iMovie deals with the photos.

Can I turn the Ken Burn Effect off when using the iMovie app on my iPod touch 5th generation?

I have an iPod touch 5th generation and I'm trying to make a movie using the iMovie app. When I put an image on there it moves from side to side and zooms in and out. I believe this is called the "Ken Burn Effect". Is there any way that I can turn the Ken Burn Effect off without having to adjust the image position and zoom level to be the same for the start and end points?

Hello MisfitxCaleb
Unfortunately, the Ken Burns Effect cannot be turned off in iMovie for iOS. Like you mentioned above, having the photo at the same start and end point is the best way to make it appear as if it isn't moving/zooming.

Ken Burns Effects not rendering

I am having isssues with Ken Burns effects not rendering. I have no iMovie 3rd-party plug-ins. I select the timing of the effect and hit apply and the photo clip hangs and will not render. Anyone else experiencing the same issue or have a fix??
Thank you.

I have discovered the issue. It wasn't 3rd party plug-ins, but a Quicktime plug-in entitled "QuartzComposer.component". After removing, Ken Burns effects rendered as planned.

IMovie isn't rendering Ken Burns Effect

Similar Messages

Maybe you are looking for