IMovie-it possible to add a video clip into an existing piture?????

if i have an existing picture, (still), is it possible to cut a small clip from a movie, and place it on the picture? If so, obviously the picture would stay still, but would the movie keep rolling????

you're looking for a socalled 'pic-in-pic' effect..
unfortunately, iM08 only supports a still on a video, not a video on a still..
you need tools as QuicktimePro or advanced editors as FinalCutExpress to accomplish such an effect.

Similar Messages

Is it possible to add a video clip to an allready created multicam video

First i'm totally new to Final Cur Pro x. Is it possible to add a videoclip to the multicam file i've created ? I've created a multicam file with 2 angles and got them aligned manually cause FCP couldn't do it right. Anyway now i want to add a third angle is that possible.

Well this trick did it :-)
Multicam: Add additional clip?
Thanks for your suggestions

IMovie crashes when i add a video clip

Had no problem adding all the previous clips from the browser ,it was just the last one,The moment I try to add it ,iMovie crashes.Only thing i did different was that because I had mistakenly taken the footage for that clip with the camcorder held sideways ,it means I had to rotate the clip in the browser.Cant see that would have caused the problem though.Any ideas?

I left it over night and for some reason it worked fine the next day

Import video clip into Photoshop

Seems when I attended an Adobe NAB seminar they said that it is possible to import a video clip into Photoshop to use tools, like clone, to remove objects from the clip. Is this possible and if so, is there a tutorial outlining the process. Thanks,

Thanks Jim,
Went there and could not find a clip amoung the numerous ones available. Great resource by the way. I used many combinations so search words and nothing came up. Can you give me the search words I need or do you have a title for the clip? This will help me navigate that site and get to the meat of what I need. Thanks,

In iMovie on the iPad: Recombining two video clips

I am using iMovie on the iPad (iOS 8.1.1.). I have a project where I split a video clip into two parts. I wanted to put a title that runs across both clips but it fades in and out so it doesn't stay on the screen for the entire two clips. I can't undo because I've made too many other changes since I split the original clip. Is there a way to recombine these two clips so that I can run a single title across the entire clip?

Hi wall ice-izm,
I have come up with a workaround, but would like something better. I originally sent the video to iTunes from within
The iMovie program.
I then transferred it to my pc and it was in dv format. I did not see any options for saving it in another format. If it is possible to save it in something the pc can read and ultimately that fCebook can read, I would appreciate knowing how. Yes, I do have QuickTime.
What I ended up doing was buying an app called "photo transfer app". First I saved the video to the camera roll. Then I used the app to wirelessly transfer the iMovie video to my pc and then I was able to upload it to Facebook. It was all very slow and inefficient. When I save a video to the camera roll it saves it in the .MOV format.
I was also able to transfer the video from iPad to pc by saving to the camera roll and then importing the video into Adobe Bridge CS5
Isn't there a more direct way of saving a video to the pc from within imovie in a format it recognizes?
Nancy

How do you add a video clip to a slide show?

How do you add a video clip to a slide show using elements 12?

You can import some very short video clips into Photoshop and make gifs. I can import short (10 second or so) .mvi video clips I've taken with my point and shoot camera.
Use File ->Import->Video Frames to Layers
CS3 doesn't recognize .mvi files until you enter *.* in the box, hit load, then find the file you want.
After the file has been loaded, go to Windows, and check Animation.
After the Animation bar loads, go to the right side arrow, check Make Frames from Layers.
Then Save for Web and Devices, and you've got your gif.
I find it much easier to use the separate software.

How do I add a video clip to my iPhoto slideshow?

In an iPhoto slideshow, I want to add a video clip. If I select cut then I need to click paste but that option does not come up.

First just drag the clip and drop it onto the slideshow title in the left hand pane. The you can postiion it where you want in the slideshow itself.
OT

Is there a way to copy referenced video clips into the iMovie library?

When I import video clips into an iMovie event it seems that iMovie uses only a reference to the file. When files are moved things get horrible broken soon. I noticed that iMovie does actually copy video clips into your library when you convert your library from iMovie'11 to iMovie'13. Is there a way to copy video clips into the iMovie library when importing them so that they don't get lost?

http://support.apple.com/kb/PH14747

Is it possible to pause a video clip?

Hi,
Could anybody tell me if it possible to pause a video clip for a few frames and then resume playing later in the project?
I guess I could chop the video clip into several discrete shorter clips and create some static freezeframes, and then play them all one after the other to crate the same effect.
But that sounds clumsy so I wondered if there is a way to pause/resume a video clip within a project.
Thanks.
Meme.

Many thanks for the pointers. I excitedly booted-up Motion to explore further...
... but I couldn't find anything called Timing remap or re-timing etc. Then it dawned on me that I should have specified that I'm still using Motion 2, and I guess those features are only available in Motion 3?
However, armed with the new phrase 'Timing Remap', I dived back into Google and came up with this article:
http://www.kenstone.net/fcphomepage/speed_changesmotion.html
This explains how to use the Scrub filter (also available in Motion 2) to control the playback of video clips relative to the project.
Its a bit fiddly, but I'm comfortable with basic arithmetic, so I can certainly use it to achieve the effect I want (basicaly I need a video clip to pause and then resume a few times throughout a project).
So thanks again for the feedback. It really did help.

How do i put Video clips into Imovie, Without Iphoto?

Im using Imovie for a school project, and i need to put video clips into it. But for some reason my mac doesnt have Iphoto, and i've read online that the only way to do this, is through Iphoto??? Does anybody know otherwise?? please help!!

If you have a supported camcorder or camera you should be able to import your video directly to imovie from the camera. If the video is already on you computer, select the imovie File menu, then select import to library and navigate to the movie files you want to import. The article below should help you
http://support.apple.com/kb/PH2114

How do I insert a video clip into the timeline?

Do you happen to know how I could insert a video clip into the middle of a movie like you do in FCP? Can you add tracks and insert the clip above the spot i need to change for each movie.
I don't want to render the whole movie (convert it into a MPeg2) each time.

No - DVD timelines are a little different to FCP. If you need to add a clip to the stream, you need to split the exisitng clip (you could trim it back to where you want to insert the new piece) and drag the new piece onto the same timeline. If you trimmed the existing piece then add another instance of it to the timeline and trim the new part from the left until you get to what you want as the out point.
If you have a collection of video clips on your DVDSP timeline, simply dragging a new one on will shuffle the others along appropriately. However, the audio will not shuffle with them, and you'll end up moving it all manually.
The very best thing is to create the timeline precisely as you want it in FCP and encode it to MPEG2 before bringing it in to DVDSP. Remember that DVDSP is not an editor, it is a place to assemble your work - it won't do anything remotely like FCP in that respect.

Importing video clips into slide shows

I often insert video clips into slide shows. They mix nicely with pan and zoom still photos. However, the type of video clips that can be inserted is very restricted. Why is this?
Elements can deal with a wide variety of video formats but, as far as I can see, only AVI and WMV videos can be imported into slide shows. Compact digital cameras typically use AVI, MOV and MP4 formats. My camera produces MPG videos, which I cannot import. I have to convert the clips into AVI format and reimport these into Organiser etc - which is very fiddly. I am considering buying a new camera that produces AVI video clips as standard.
Why is the choice of video formats so limited? I cannot find a list of allowable formats on the Adobe site.

Hi David
Thanks for this. I tried that, but again, Streamclip only imported content from the first clip, ignoring the rest...on further inspection, all the VOB files were sub-divisions of the the first item (in essence, the system had chopped up the first recording into sections and formatted them as VOB files, but failed to do that for the remaining content of the DVD).
I booked an appt with a Mac Genius today and he downloaded Handbrake and this appears to be the way forward - you can isolate any of the content from the DVD, and save into either avi or mp4 files. I currently don't need Streamclip, since after my selection's been saved unto the desktop it can be dragged into iMovie and edited from there. I'll be keeping Steamclip though...after all of the aggro, it seems to good to be true!
Thanks again for responding to my query. Really appreciated that you took the time.

When I try to import video clips into Premier Pro 6 the audio and video aren't synced.

When I try to import video clips into Premier Pro 6 the audio and video aren't synced. I can moved both of them around without the other. This creates a lot more work. I have looked on forums etc but can't find the answer Can you please help.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
-and Source Patching http://forums.adobe.com/thread/1442800?tstart=0
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Does your video use a VARIABLE Frame Rate or a Constant Frame Rate?

How to combine video clips into one video clip using FCPX

I typed this into the search engine but could not come up with anything. How do you combine Video clips into one Video clip using FCPX? Thanks in advance.
Gar

The simple answer is to put the clips together in a project in the desired order and export (oops, the new word is share [YUK!]) a master file.
But maybe you should say a little more about the clips to determine whether the answer I've given is relevant to yor situation.

How do I get video clips into Organizer from Elements?

I have broken my raw video into pieces in elements but can't get it to import into organizer.
I am using Elements 11 Trial.

The video is actually a football highlight film for our son and came to us as a single mp4 file with about 60 plays of video on it.
What I am trying to do is
1) Cut it down into 60 individual videos (which I did and currently have in my project).
2) Save the pieces off as individual video clips.
3) Get the ability to rank/rate each video and select the 25 or so that will make up the final video.
4) Polish/edit those that make the grade.
5) Organize and assemble.
Does this make sense?
t
Date: Mon, 19 Nov 2012 14:44:31 -0700
From: [email protected]
To: [email protected]
Subject: How do I get video clips into Organizer from Elements?
    Re: How do I get video clips into Organizer from Elements?
    created by whsprague in Premiere Elements - View the full discussion
karaannmbb wrote: I have broken my raw video into pieces in elements but can't get it to import into organizer. I am using Elements 11 Trial.Place the "Work Area Bars" (located on the time line) so that only a "piece" is covered. Then "Share" to a computer file. Pick a file type that suits your needs. Be sure to check the box titled "Share WorkArea Bar Only". Unfortunately, the clip piece will be re-encoded. PrE11 will do that well, but not perfect because any encoding always seems to loose a little. You did not say what camera you are using. The software that came with my Sony and Panasonic camcorders is much better for splitting clips into smaller clips. Some sort of magic is in them where re-encoding does not take place. The pieces have the same picture quality as the original.   So, when I do what you want, I break it into pieces with the camcorder software, the put the video together in PrE with all the creative tools it offers. Bill
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4859754#4859754
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4859754#4859754
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4859754#4859754. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

IMovie-it possible to add a video clip into an existing piture?????

Similar Messages

Maybe you are looking for