Imovie loading error with plugins

when I load imovie, the error message is: Something is wrong with the plugin auto saturation carbon, and about 5 other plugins. How can I fix this? I reinstalled the software, but maybe there is something I am missing..

if you downloaded plugins, they may not be compatible with imovie 6 or may not be comp[atible with Intel.
You need to check with the company that you downloaded them from. There may be an update that will make them work.
:)Sue

Similar Messages

Constant & erratic "Page Load Error" with Safari and Firefox

A week or two ago, I started getting constant "Page Load Errors" ('this page cannot be found', etc) when browsing with either Safari or Firefox. These are not dead sites that time out, but are very live (and cannot be summoned no matter how many times refresh)!
Something is wrong on my computer's end: I have strong wireless, have tried connecting with ethernet, and have used a different network. All of these produce the same result, where about half of the sites I try to connect to are instantly declared as dead by any browser I use.
I am not using any firewall, and have emptied both browser's caches.
Any ideas would be greatly appreciated.
Thanks!
Cliff

I'm having the same problem. It only happens at home over my DSL connection. Here is what I have tried and the results.
This really started bothering me since I upgraded to a recent Macbook Pro. I tried my original MBP with Leopard and found it doing the same thing. I ended up testing from my G4 and it works fine. The problem occurs over wireless and wired. I tried changing my MTU size with no change. I thought it was DNS but changed to other DNS and it didn't make a difference. Happens in Safari and Firefox. I am thinking it has an effect on iTune store also. The problem goes away when I VPN in to work, comes back when I close the VPN.
Just tonight I installed an clean 10.5 Leopard on my original MBP. Safari works perfectly. Instead of updating to 10.5.6, I download the 10.5.5 update. After updating the problem reappeared.
Again, my G4 with latest Tiger update work fine and both Macbook Pros with the latest Leopard have a problem over my DLS connection. They work perfectly fine at work and other locations.
Ted

Firefox works with dial-up but get "page load"error with FIOS

Firefox works well with a local dial-up, but I keep getting "page load"error message when I try to use FIOS. The connections look good,and Firefox is enabled with the Windows security firewall.
I did have some connections unplugged when I was moving the computer and router around.
I have run out of ideas to fix it.
== Operating system ==
Windows XP home addition

Note that the xpcom.dll file is no longer present in current Firefox versions, so you may have an extension or other software that needs to be updated for the current release.
*Bug 852950 - Kill xpcom.dll/libxpcom.so/xpcom.dylib
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Load Error with return code 7000 when call sqlldr in interface.

Hi All,
I have created a interface to load data from 'File' to 'Oracle' in ODI 11g.
Below are the running order of this interface.
1 - Loading - SrcSet0 - Drop work view
2 - Loading - SrcSet0 - Drop Temp Table
3 - Loading - SrcSet0 - Create Temp table
4 - Loading - SrcSet0 - Create Work View
5 - Loading - SrcSet0 - Generate CTL file
6 - Loading - SrcSet0 - Call sqlldr
We are getting the following error while running the step 6.
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 22, in <module>
Load Error: See C:\home\oracle\joc\odi/AIM.log for details
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
And it return code 7000 indicated in 'Execution Statistics'.
If anyone has encountered a similar issue and able to solve it, please share your thoughts with me.
Thanks in advance for your help.
Dicksam

This forum is dedicated to supporting the use of Maven with FMW and the new Oracle Maven Repository. Given that ODI does not currently provide Maven support, you are unlikely to get a response in this forum. You might want to try posting in a different forum dedicated to Data Integration, such as the Master Data Management forum.

GTC Page Not loading - Error with Resource Bundles

I am using following OIM Software:
OIM 9.1.0.2
Linux x86
While accessing the GTC Manage Page, I am getting the Search button, Once I click the Search for all GTCs, It is throwing me error with "Contact Sysstem Administrator"
During the investigation, I found that I am getting the following error when I access the xlWebApp through Web:
===============
INFO,16 Aug 2010 11:58:35,171,[XELLERATE.WEBAPP],Property global.resultSet.Form~Information.Description.create~generic~connector not found in en locale bundle.
INFO,16 Aug 2010 11:58:35,171,[XELLERATE.WEBAPP],Property global.resultSet.Form~Information.Description.manage~generic~connector not found in en locale bundle.
INFO,16 Aug 2010 11:58:35,172,[XELLERATE.WEBAPP],Property global.resultSet.Form~Information.Description.Reset~self~password~menu~item not found in en locale bundle.
INFO,16 Aug 2010 11:58:35,172,[XELLERATE.WEBAPP],retrieving object from cache key = xlCustomClienten
INFO,16 Aug 2010 11:58:35,172,[XELLERATE.WEBAPP],Property global.resultSet.Form~Information.Description.Change~self~password~menu~item.Change~Self~Password~menu~item not found in en locale bundle.
INFO,16 Aug 2010 11:58:35,172,[XELLERATE.WEBAPP],Property global.resultSet.Form~Information.Description.Create~generic~connector.Create~Generic~Technology~Connector~menu~item not found in en locale bundle.
INFO,16 Aug 2010 11:58:35,172,[XELLERATE.WEBAPP],Property global.resultSet.Form~Information.Description.Manage~generic~connector.Manage~Generic~Technology~Connector~menu~item not found in en locale bundle.
===============
I added the following in customResources_en.properties
global.resultSet.Form~Information.Description.create~generic~connector=create generic connector
global.resultSet.Form~Information.Description.manage~generic~connector=manage generic connector
global.resultSet.Form~Information.Description.Reset~self~password~menu~item=Reset self password menu item
global.resultSet.Form~Information.Description.Change~self~password~menu~item.Change~Self~Password~menu~item=Change Self Password menu item
global.resultSet.Form~Information.Description.Create~generic~connector.Create~Generic~Technology~Connector~menu~item=Create Generic Technology Connector menu item
global.resultSet.Form~Information.Description.Manage~generic~connector.Manage~Generic~Technology~Connector~menu~item=Manage Generic Technology Connector menu item
I am trying so many options with these two files, however the error is not changing at all. Also, do I need to add this to customDefaultResources.properties?
Any suggestions?
Thanks in advance. I will assign Points.
Regards
Vijay Chinnasamy

LCMan wrote:
Carolyn Samit wrote:
Did you read my response to you??
Yes. However, I don't believe it's an enycryption issue. It's something to do with javascript.
Regardless of what the issue is, the only (temporary) fix seems to be to use Firefox. However, I would have to agree with what Carolyn Samit said. Carolyn is a very active member here and knows a lot of things.

Mod_jk load error with Apache on OS X

Hello -
I have been running CF9 on OS X with a MacPorts install of Apache 2.2.21 with no issues as a "standalone" server installation. To get ready for CF10 I have ben trying to get CF10 configured with Apache. The specefic error I am getting when launching Apache is:
Cannot load /Applications/ColdFusion10/config/wsconfig/1/mod_jk.so into server: dlopen( /Applications/ColdFusion10/config/wsconfig/1/mod_jk.so, 10): Symbol not found: _apr_stat$INODE64\n Referenced from: /Applications/ColdFusion10/config/wsconfig/1/mod_jk.so\n Expected in flat namespace\n /Applications/ColdFusion10/config/wsconfig/1/mod_jk.so
I have done the following:
1. Recompiled Apache and forced a 64-bit compile
2. Uninstalled CF9
3. Uninstalld and reinsalled CF10
4. apxs is installed in /opt/local/apache2/bin (listed asa requirement in one of the documentation PDFs)
5. This is a Lion 10.7.3 with Xcode 4.2.1 currently installed
The error listed above is only a warning. Apache starts and still servers html files. I am a bit stumped and have no experience with Tomcat. Any help in finding a solution to this problem will be appreciated.
Thank you
Richard

Made progress -
Setting the max_packet_size seemed to start the 1st time CF10 admin process, just like it did with CF9 the 1st time we access the administrator. Then, it just went to a blank white screen.
mod_jk.log reports:
[error] ajp_process_callback::jk_ajp_common.c (1825): Unknow ajp protocol code: 0F
[error] ajp_process_callback::jk_ajp_common.c (2426): (cfusion) connecting to tomcat failed
Now: here is something interesting:
Look at the end of the URL when it 1st attempts to access administrator: It is index.cfm?configServer=true or index.cfm?serverConfig=true
By removing this it allows me to simply click on the "continue" option and low and behold the CF admin comes up.
I also have an issue with topnav.cfm reporting a 400 (Bad Request)
Quiting the browser and comming back to CF Admin displays the login page but after enter username and password I land on index.cfm and it goes no further.
Refreshing the page starts to rope in various admin componets.
Also, it will not process any simple cfm template reporting an internal server error.
Hopefully this has to do with this being a beta.

Sql loader error with date format

Hi everyone,
I have table and have a data in one coulmn RECORDED_DATE like '20090224' and my client is asking me to load this coulmn data in 'yyyymmdd' format.I am strucked up with my ideas.I used to_date('20090124','yyyymmdd') in control file.but it is also not working Here it is my control file
LOAD DATA
INFILE 'C:\xxxx\SQLLDR\HE data\HE_data_Feb.txt'
BADFILE 'C:\xxxx\SQLLDR\HE data.bad'
DISCARDFILE 'C:\xxxx\SQLLDR\HE data.dsc'
INTO TABLE LSCCMGR.FASTPAY_HE_DATA
REPLACE
fields terminated by X'09'
TRAILING NULLCOLS
(RECORDED_DATE "TO_DATE(:RECORDED_DATE,'mm/dd/yyyy')"
AGENT_ID
MEASURE
TRANSACTIONS
FEES
If i excute like this i am getting the error like
Record 1: Rejected - Error on table LSCCMGR.FASTPAY_HE_DATA, column RECORDED_DATE.
ORA-01843: not a valid month
Getting for all records,what i need o change to get the RECORDED_DATE as dateformat.Ple any one help me in this issue to resolve
How can we perform this using sql loader pls let me know,Thanks in advance.
Sravan

Hi,
>>(RECORDED_DATE "TO_DATE(:RECORDED_DATE,'mm/dd/yyyy')"
*Change this line to*
(RECORDED_DATE "TO_DATE(:RECORDED_DATE,'yyyymmdd')"Regards,

Mod_wl.so "Thread Local Storage" load error with Apache and WL 7

I'm using Apache 1.3 and WL 7.0, and after configuring Apache to load mod_wl.so,
I get the following error when starting up. I'm using the mod_wl.so that is
for hpux11.
Thanks for any help.
$ ./apachectl start
/usr/lib/dld.sl: Can't shl_load() a library containing Thread Local Storage: /usr/lib/libcl.2
/usr/lib/dld.sl: Exec format error
Syntax error on line 1053 of /opt/apache/etc/httpd.conf:
Cannot load /opt/apache/lib/modules/mod_wl.so into server: Exec format error
./apachectl start: httpd could not be started

Sunny,
When you build apache on hpux, you should do the following before the
configure:
export CFLAGS="-lstd -lstream -lCsup -lm -lcl -ldld"
Regards,
Eric
"Sunny Yee" <[email protected]> wrote in message
news:[email protected]..
>
I'm using Apache 1.3 and WL 7.0, and after configuring Apache to loadmod_wl.so,
I get the following error when starting up. I'm using the mod_wl.so thatis
for hpux11.
Thanks for any help.
$ ./apachectl start
/usr/lib/dld.sl: Can't shl_load() a library containing Thread LocalStorage: /usr/lib/libcl.2
/usr/lib/dld.sl: Exec format error
Syntax error on line 1053 of /opt/apache/etc/httpd.conf:
Cannot load /opt/apache/lib/modules/mod_wl.so into server: Exec formaterror
/apachectl start: httpd could not be started

Report.Load Error with ASP application

Hi,
I experienced a few instances where my the follow statement where my ASP application (using VS2005, CRXI-R2+SP4, Datasets and CR Viewer on the server) thows an error on my server (running Server 2003).
        Dim Report As CrystalDecisions.CrystalReports.Engine.ReportDocument = _
            New CrystalDecisions.CrystalReports.Engine.ReportDocument()
        Try
            Report.Load(Server.MapPath("~/Private/Event/WebEvent.rpt"))
        Catch ex As Exception
            JavaMessage("Report Not Found")
            Exit Sub
        End Try
I don't know what the exception is at this point. But something happens and the crystal reports in all my websites break uniformly. I need to restart IIS to get things back working. This has happended to me 3x now.
Any ideas?
Thanks,
Eric

Hi,
As a best practice use Close() and Dispose() method also gc.Collect();
Check if this helps!!
Amit

Help needed please -Master data loading- error with text loading.

Hi,
Iam S.Sushma. Iam getting error while loading master data from flat file- attributes and texts.
I have loaded attribute data successfully. But when iam monitoring the text data then iam getting following error.
""SET THE LANGUAGE FIELD IN THE SOURCE SYSTEM-LONG TEXT.""
""RECORD1: SRPID_1:DATA RECORD 1(EN S):DUPLICATE DATA RECORD.
"ERROR 4 IN UPDATE"
I took 2flat files for attributes and texts.
SRPID is key field.(sales representative id)
attributes:- SRPID, NAME1, AGE1, ADD1,PHONE1.
text:- SRPID,LANG,SHTXT,MDTXT,LGTXT.
Iam just a begginer so need your guidence. Thank you in advance.
Message was edited by: sushma sandepogu
Message was edited by: sushma sandepogu

Hi Eugene,
Thank you for your guidence. I have changed the order in flat file and got the results successfully. But when iam viewing the Master data text the S10 in coming in 2nd position in maintain master data-list screen i mean :-
SRPID LANG NAME AGE ADD PHONE SHTXT MDTXT LGTXT
S1 EN ABC 34 GDS 1234 AS ASD ASDDF
S10
S2
S3
S9.
Iam not understading why. Hope yu can help me. I have assigned full points to you for your previous solution.
Thank you in advance.
S.Sushma.

[Advanced] Sudden 'Movie not loaded' error with multi-swf flex application

Hello!
We've stumbled across a very strange problem, which we can't reproduce regulary, and therefore can't find a way to debug it.
Our flex application consists of multiple .swf-files, each containing a piece of functionality we call module (though it's not a regular flex module), which interact with other modules in the application.
But sometimes user interaction lead to the following problem. Some block of the application (which originated from certain module) becomes black, and right-clicking on it brings 'Movie not loaded' context menu item. After some time, the whole application becomes 'not loaded'.
I have no idea of the cause of such a behaviour. I suppose some changes were introduced in Flash Player 10.2 - we didn't experience this problem before.
Adobe guys, may you direct us and give us an advice on how to debug such a problem, and what might be a cause?
It look like this:
1)
(in black area was a window similar to the one in background)
2)
(After right-click. You can see flash player version here)
We're completely lost, and will really appreciate any help or advice.

use an online tracer and network monitor to see what you're doing.

Incremental load fails with the error LM_44127 Failed to prepare the task

Guys,
I have created a custom mapping and cretaed a execution plan for this mapping in the DAC. The full load completes successfully. But when ever the incremental lod is run , i am getting the below error and the task fails(The SDE load completes sucessfully , but the SIL load fails with the below error).
LM_44127 Failed to prepare the task
Please help!!!

i googled it..
http://datawarehouse.ittoolbox.com/groups/technical-functional/informatica-l/lm_44127-failed-to-prepare-task-when-running-workflow-in-informatica-86-on-aix-3199309
you can try for better links now.. !!

After upgrade to 4.1 from 3.2, admin logon page error with "done error load

Hello all,
Just upgraded 3.2 to 4.1. ran @apexins.sql sysaux sysaux temp /i/. Installation was successful and upgrade completed with no errors. When trying to log on to admin page, url changes to admin workarea but with IE we get "done error loading pages" and logon screen doesn't appear. All objects are compiled, accounts are unlocked and valid. Same thing happens when attempting to logon to the applicaiton. Any help would be appreciated. Open SR with oracle support, but no reply since yesterday.
inital url: https://xxxxxxxx.xxx.com:8443/pls/apex/apex_admin
ending url: https://xxxxxxxx.xxx.com:8443/pls/apex/f?p=4550:10:903647939084101
"done error loading pages"
Edited by: user12128153 on May 18, 2012 2:21 AM

Hi user12128153 (a real name would be nice),
a few questions for you.
Do you experience the same errors with firefox? If so install firebug (if you don't have it already) and see if the errors have to do with missing css etc.
What application server do you use, OHS/Apex Listener etc?
Kofi

Sql@loader-704 and ORA-12154: error messages when trying to load data with SQL Loader

I have a data base with two tables that is used by Apex 4.2. One table has 800,000 records . The other has 7 million records
The client recently upgraded from Apex 3.2 to Apex 4.2 . We exported/imported the data to the new location with no problems
The source of the data is an old mainframe system; I needed to make changes to the source data and then load the tables.
The first time I loaded the data i did it from a command line with SQL loader
Now when I try to load the data I get this message:
sql@loader-704 Internal error: ulconnect OCISERVERATTACH
ORA-12154: tns:could not resolve the connect identifier specified
I've searched for postings on these error message and they all seem to say that SQL Ldr can't find my TNSNAMES file.
I am able to connect and load data with SQL Developer; so SQL developer is able to find the TNSNAMES file
However SQL Developer will not let me load a file this big
I have also tried to load the file within Apex (SQL Workshop/ Utilities) but again, the file is too big.
So it seems like SQL Loader is the only option
I did find one post online that said to set an environment variable with the path to the TNSNAMES file, but that didn't work..
Not sure what else to try or where to look
thanks

Hi,
You must have more than one tnsnames file or multiple installations of oracle. What i suggest you do (as I'm sure will be mentioned in ed's link that you were already pointed at) is the following (* i assume you are on windows?)
open a command prompt
set TNS_ADMIN=PATH_TO_DIRECTOT_THAT_CONTAINS_CORRECT_TNSNAMES_FILE (i.e. something like set TNS_ADMIN=c:\oracle\network\admin)
This will tell oracle use the config files you find here and no others
then try sqlldr user/pass@db (in the same dos window)
see if that connects and let us know.
Cheers,
Harry
http://dbaharrison.blogspot.com

Error with Loading Device Software on 8700 AT&T phone.

Hi. I would like some help with my 8700 AT&T refurb blackberry phone. When I tried to download the device software (v4.5) to my already downloaded DTM (v4.6), it gave me an error message I did not know what to do with.
I want to synch my organizer data (calendar, contacts) from older desktop (Outlook 2002) to my new laptop (Outlook 2007, Windows 7). I am having trouble downloading the supporting device software. I keep getting an error message that reads "Error with the Application Loader. Cannot update software using this system as device is currently activated on a blackberry Enterprise Server or professional software. Contact administrator or check with service provider." I do not use Enterprise. I don't have an internet service plan for my phone as I use it only for calendar and contacts. AT&T gives the software option for AT&T 8700 in English device software as v4.1.0.175 as the only option that is supported by my current platform (2.0.0.90). Is this right?
All I really want to update my phone with the latest software that supports Outlook 2007 on my new laptop. What do I need to make that happen?
Thanks in advance.

Hi there!
Refurbs can be problematic. If a BB was ever activated on BES, then it has an IT Policy. IT Policies are not removed by the standard WIPE actions. Rather, they take additional steps to clean off the Policy.
Just to check, please go to this screen:
Homescreen > Options > Security Options > (Information) or (General Settings) or (something similar)
On that screen will be some selection boxes plus other sections (divided by horizontal lines). If, on that screen, there is any discussion about IT Policy (even if it says "Default"), then you indeed have an IT Policy on your BB. (The screen may also have a section for "Services").
If you don't have an IT Policy, then something else is going on...in which case, stop here and report back exactly what you found on that screen.
If you do have an IT Policy, then, in my view, you have two choices.
1) Since this refurb was provided to you by ATT, they did not deliver to you a "clean" device. You could take it back to them and have them clean the IT Policy off.
2) You can remove the Policy yourself. The process is 100% destructive to the data on the BB, so you'll want to be sure you've already taken a good full backup. Then use Method 3 in this KB.
As for what device OS to install, you have more choices than you indicated. See this page:
https://www.blackberry.com/Downloads/browseSoftware.do;jsessionid=0A15EC28AEC181D3F3F9C5235D9F166A.n...
Select, from the drop-down, your model (8700). The resulting screen shows that ATT is currently supporting 4.5.0.182 (MultiLanguage) for your BB model. The MultiLanguage pack will include English, so you don't have to fall all the way back to the English only version. So, you have choices. The best advice is to use the most recent version -- bug fixes, enhancements, and all of that.
What I advise, since you want to use Outlook 2007, is to use that 4.5.0.182 package for your BB and the most recent RIM desktop package (5.0.1.28). That way, you will have full compatibility for what you are looking for.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Imovie loading error with plugins

Similar Messages

Maybe you are looking for