IMovie looking for old server

Hello,
I have my videos are on a NSA, I have now been replaced.
Now, unfortunately, iMovie and iDVD always ask for the old server!
Which there is no more?
What can I do?
Greetings!
Hallo,
ich habe meine Videos auf einem NSA liegen, den ich nun ausgewechselt habe.
Leider fragen nun iMovie und iDVD immer nach dem alten Server!
Den gibt es aber nicht mehr?
Was kann ich tun?
Grüße!

I fixed the problem

Similar Messages

  • Since lion upgrade iMac keeps looking for old server

    Hi,
    I have a NAS prior to Lion upgrade which was working perfectly. Now with the Lion upgrade the NAS (Sitecom) ther were some issues. I have reinstalled the NAs and had given it a new name. I can find the NAs now so thats not a problem.
    But almost every hour I get 2 warning that he can not find the "old NAS", it really start annoying me and I've looked everywhere and I don't even find any link (Finder) towards it so I don't know what to do to get rid of this message, receiving it every hour twice really start getting on my nerves.
    Sorry for th Dutch, but the message translates;
    A problem has occured with connecting to the server 'VanBeeckNAS'
    The server doesn't exist or is currently not available. Check the servername or the IP-address of the server, ...
    Any help is highly appreciated.
    Peter

    Same problem since lion. Not only can I not back up to the server it keeps looking for it several times on start up. Real annoying.

  • System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) it gets through.

    System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) finally  gets through.

    Other weirdness to report: my neighbor upstairs appears to have a Linksys router network on channel 6. My AEBS is on channel 1 so there shouldn't be interference... but according to iStumbler sometimes the signal leaps to 64000 (keep in mind my own Airport never tops 60)! Is that potentially the problem?
    Might it be possible that your neighbor just acquired a 802.11n (pre-N) wireless router recently?
    802.11n effectively increases capacity by doubling the number of Wi-Fi radios and increasing the number of antennas used to push signals out of those radios. 802.11n splits a data frame into multiple pieces. It then transmits these pieces in parallel using multiple radios that are attached to multiple antennas. These antennas blast out signals from virtually the same vantage point – scattering the signals everywhere.
    You may find the following ZDNet article interesting: http://blogs.zdnet.com/Ou/?p=247
    Even if he did not, and you are on good terms, you might want to ask if he can temporarily turn off his wireless, or, at least, reduce the signal strength to see if that will help in your situation.

  • Why tomcat is still looking for old jar files?

    Please help me it is a very serious problem.
    I updated one of the jar files used by the project. I am using a new method that is available only in the new library. I removed the old jar files in my local system, and everything worked fine. Then I commit those files to the subversion, which is in the testing server, and then I created the war file. The war is successfully created, then I deployed to the tomcat. But, now there is an error in the portion I am using the method that is only available in the new jar files.
    One of the error when I go to that portion is:
    1. No Such Method Exists
    The other errors on log files are:
    1.
    WARNING: Failed to open JAR
    java.util.zip.ZipException: No such file or directory
    2.
    validateJarFile(tomcat/webapps/ROOT/WEB-INF/lib/j2ee.jar) - jar not loaded. See Servlet Spe
    c 2.3, section 9.7.2. Offending class: javax/servlet/Servlet.class
    Please help me, I have tried every other way to solve this. I have tried removing all the old jar files there were, and replacing with the new one. I have tried creating a war file and ftping to the testing server.
    I problem is still there and it is because the testing server's tomcat is still looking for old jar files. I used Netbeans and add jar files as usual method.

    Check the contents of your WAR file that you are deploying on the testing server to see if it contains the JAR that you can't find.
    More than likely you are building your WAR file and your new JAR file is not being included in the build.

  • Server crashed. How do I reset iPads so they stop looking for the server?

    I was using the OSX Server app on an old Mac Mini when it crashed. A cart of iPads had been set up to use Profile Manager with the Device Enrollment Program part of Apple Mobile Deployment. I have deleted the server from the Device Enrollment Program, but my iPads are stuck in set up looking for the server. I am willing to put them back in Configurator at this point, but Configurator will not recognize them. Help!

    Yes, MaxAuthTries is involved here as a limit, but -vvv should tell you more of what's going on...
    Warning: Permanently added '[FQDN]:2336' (RSA) to the list of known hosts.
    is normal for a new ssh connection.
    Too many authentication failures for USER
    usually means the password is wrong, or the ssh certificate is not accepted or not acceptable.   Or that you might possibly have tried a large number of different logins, and bumped into MaxAuthTries.
    Try an ssh from the client into the target box with the -vvv switch (and the proper target port, if you're not using 22 here), and see if you can duplicate the error.  The -vvv turns on gonzo logging.  Depending on what's going on, you might also have to turn on logging in sshd.  That's usually a configuration file option within the context of the daemon.
    For grins, I'd also check DNS services on both the client and the server; use sudo changeip -checkhostname on the server, and dig +short www.example.com (substitute the FQDN of the server) on the client.

  • How do we change de location where iMovie looks for its projets and event ?

    Would you know how to change de location where iMovie looks for its projets and events ?
    I want to put those on an external disk.

    You must do this within iMovie.
    In iMovie, click VIEW/GROUP EVENTS BY DISK
    This will show all properly formatted external disks (must by HFS+ journalled, not FAT32)
    Now you can drag your Events to the disk by dragging and dropping the Event Name to the icon of the disk in the Event Source List in iMovie.
    You can also move projects. See iMovie Help for details.

  • Old computer crashed.  trying to sync my iphone with new computer but phone is looking for old computer.  how do i change it?

    old computer crashed.  iphone is looking for old computer so I can't get it to sync with my new computer.  Suggestions?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • IMovie 11 freezing looking for old (trashed) computer doing iphoto import?

    Odd problem with my new iMovie. When I try to run it and it goes through the update of files from iPhoto, it freezes and says that the network connection with an old desktop computer we used to have is broken. Then it just reappears and will never complete the iphoto transfer. I have changed iphoto libraries to a new one and that solved the problem, but we have a ton of movies in our iphoto library that I need in imovie. Does anyone know how to disassociate iphoto library from an old computer? In iphoto there are no issues with looking for the old computer, and I don't think we ever had them synced to begin with. Any help is appreciated.

    Hello,
    I have the same problem on my mid 2012 MBP retina 15 inch. For example, when i am importing from facetime in final cut, sometimes it records in 720HD @ 24fps, and sometimes in non-HD @ 17fps.
    Everything is up to date, i have tried recording from photobooth and quicktime, and the issue remains the same.

  • MacBook Pro looks for a server I no longer have

    I had a Drobo-FS connected via Ethernet. I no longer have it but some programs complain they can't find the server Drobo-FS after a long timeout.  Is there a place I can look to delete it from the list of servers?  I have a MacBook Pro Retina, OS-X 10.8.4.
    ~Thanks! Richard

    Linc~
    I'm the original poster.  Apparently I do have more than one account, and I will do my best to stick with just one.
    As for my problem, I may have stumbled on the answer.  There was one item in my Finder sidebar that points to a folder on the old server.  I removed it, and the problem has gone away.
    Thanks to all who lthought about the issue and tried to help!
    ~Richard

  • New Mac Pro keeps looking for a server that isn't there

    So, I just got my new Mac Pro (Mountain Lion 10.8.2) the other day.  I used MIgration Asssisant to transfer most files from my old Power Mac G5.   Computers were connected thru a hub.
    Then I turned on file sharing on the old machine to get some other info transferred.  I then shut down file sharing, physically disconnecting the hub and connecting the new Mac Pro to my DSL modem with an ethernet cable.
    Now when I boot up the new machine, I get a message
    "There was a problem connecting to the server  'Joe Blow's Power Mac G5'.
    "The server may not exist or it is unavailable at this time.  Check the server name or IP address, check your network connection, and try again."
    I get this message three separate times ove a couple of minutes.
    Under the "Go" button in the Finder menu, I've clicked on  "Connect to server..." and cleared the old mac out of the list.
    What am I missing??
    Thanks

    Common causes of this issue include the following:
    Aliases in the iPhoto, iTunes, or iMovie library pointing to the server.
    Bookmarks in the Preview application.
    See iMovie Troubleshooting: Connection Failed, Server Does Not Exist
    Otherwise, proceed as below.
    Please read this whole message before doing anything. This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it. Step 1 The purpose of this step is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.” While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin. Test while logged in as Guest. Same problem? After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it. *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. Step 2 The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows: 
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • New iMac looks for old Mac tower

    I purchased a new iMac recently and used Migration Assistant to move my Documents folder over from my old G5 Tower. To the best of my memory, I did not use Migration Assistant to move system files or applications over to the iMac.
    Once I thought I had everything configured just right, 3 things occured where the new iMac was looking for the old G5 Tower:
    (1) at startup, a dialog twice appeared, indicating that the old G5 could not be found. I used the Accounts/Log In Items to disable start up items that were "unidentified." First problem solved.
    (2) When I try to print, the iMac looks for my old G5 when I first try to access a pulldown menu in the print dialog window, and after quite awhile an alert message appears indicating that the G5 server is unavailable. I've tried deleting all installed printers and then reinstalling them, to no avail.
    (3) In my folder windows, under the Places list, there is a favorite folder that is repeated twice, one that links to the "04_FT" folder on the new iMac, and an identically named item that does not function as a link (but a folder with this name did live on the old G5) and I'm unable to remove it from the list. When I Control click on it, the only option I get is to "Open Sidebar Preferences."
    I suspect that both (2) and (3) are similar "ghost" references back to the old G5, but I don't know how to remove them.
    I would very much appreciate any help or suggestions that the iMac community might have to offer.

    I would recommend starting over and instead of using Migration Assistant this time using Setup Assistant. They are cousins, similar but different. First SA is more reliable and second it will not create a second user account. Because you are migrating from a PPC machine I would migrate everything EXCEPT applications. You should manually install your apps, this will give you the opportunity to udate the ones that need it and I'm sure there are many. You may even apps that won't run on Intel based machines so why migrate them at all? You can use the Setup Assistant tips beginning at "Second chance...." You can either restore from your old machine or from one of it's backups. I think you'll see it's a pretty clean process, something you passed over (I'm not sure why) when  you turned on the new iMac for the first time.

  • Looking for old patch 106257-04 or earlier (Solaris 2.6)

    I am looking for an older version of patch 106257-04 for solaris 2.6. This is for testing our product on solaris 2.6 with a patch level before 106257-05 (which I have).
    Thanks,
    Brian Walton

    Hi
    You're not going to find the old version of the patch your after on sunsolve, only the latest revisions seem to be available for download. You could try searching for some alternate sites which might hold copies of the old patch but I'd be disinclined to download a patch from any old site and put it on a production server.
    If you've got old copies of the Sunsolve CDs you might find it on there, otherwise your going to have to use the latest revision.
    If you've got a support agreement with Sun, you could try requesting it from your account manager.
    regards

  • Imovie - software for old Notebook running OSX 10.6

    Hi,
    I have an old notebook with a 2 GHz Intel Core 2 Duo processor with the following video card:
    Intel GMA 950:
      Chipset Model:    GMA 950
      Type:    GPU
      Bus:    Built-In
      VRAM (Total):    64 MB of Shared System Memory
      Vendor:    Intel (0x8086)
      Device ID:    0x27a2
      Revision ID:    0x0003
    When I updated to OSX 10.6 i lost imovie.  I went to download it from the apple store but it said the video card could not support it.
    What can I do to get either an old version of imovie that will work on my machine, or can anyone recommend an alternative program that's as good?
    Thanks

    Hi
    Did it come with Your Mac (Start DVDs) ? It should be there.
    I would try to find this Start DVD and re-install it - then go to up-date.
    What version did You have ?
    I use on my MBP (Mac OS X.6.8)
    - iMovie HD6 (best iMovie ever for StreamingDV - miniDV tapes)
    - iMovie'11 (version 9.0.4)
    (FinalCut Pro 6, Adobe Premiere Elements 11)
    There are no free LEGAL downloads anywhere !
    Yours Bengt W

  • CM looking its old server after cloning ..... can't running CM

    Dear Gurus,
    I have cloned PROD instance from GTGEBSPROD server to GTGEBSRND, after that I can't start Concurrent Manager. DB, Apps all r up and running.....
    Look here.....
    [applmgr@gtgebsrnd ~]$
    [applmgr@gtgebsrnd ~]$ ps -ef | grep FNDL
    applmgr   1307  1302  0 16:39 pts/3 00:00:00 FNDLIBR
    applmgr   1807   610  0 16:52 pts/3 00:00:00 grep FNDL
    [applmgr@gtgebsrnd ~]$
    [applmgr@gtgebsrnd ~]$
    [applmgr@gtgebsrnd ~]$
    [applmgr@gtgebsrnd log]$ cat PROD_1110.mgr
    Process monitor session started : 10-NOV-2013 15:07:50
    Could not contact Service Manager FNDSM_GTGEBSPROD_PROD. The TNS alias could not be located, the listener process on GTGEBSPROD could not be contacted, or the listener failed to spawn the Service Manager process.
    CONC-SM TNS FAIL
    Call to PingProcess failed for FNDCPGSC
    CONC-SM TNS FAIL
    Call to StopProcess failed for FNDCPGSC
    CONC-SM TNS FAIL
    Call to PingProcess failed for FNDCPGSC
    CONC-SM TNS FAIL
    Call to StopProcess failed for FNDCPGSC
    CONC-SM TNS FAIL
    Call to PingProcess failed for FNDCPGSC
    CONC-SM TNS FAIL
    Call to StopProcess failed for FNDCPGSC
    CONC-SM TNS FAIL
    Call to PingProcess failed for FNDOPP
    CONC-SM TNS FAIL
    Call to StopProcess failed for FNDOPP
    CONC-SM TNS FAIL
    Call to PingProcess failed for FNDOPP
    CONC-SM TNS FAIL
    Call to StopProcess failed for FNDOPP
      Process monitor session ended : 10-NOV-2013 15:07:50
    [applmgr@gtgebsrnd log]$
    [applmgr@gtgebsrnd scripts]$ tnsping FNDSM_GTGEBSRND_PROD
    TNS Ping Utility for Linux: Version 10.1.0.5.0 - Production on 10-NOV-2013 15:35:56
    Copyright (c) 1997, 2003, Oracle.  All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=gtgebsrnd.xpressbd.net)(PORT=1703)) (CONNECT_DATA= (SID=FNDSM)))
    OK (0 msec)
    [applmgr@gtgebsrnd scripts]$
    CM is looking its origin server FNDSM_GTGEBSPROD_PROD....
    Where .. in which file I need to edit .. please guide me.
    Apps Environmental file is given below....
    [applmgr@gtgebsrnd home]$ cat set_env
    .  /u02/app/oracle/PROD/apps/apps_st/appl/APPSPROD_gtgebsrnd.env
    [applmgr@gtgebsrnd home]$
    [applmgr@gtgebsrnd home]$ cat /u02/app/oracle/PROD/apps/apps_st/appl/APPSPROD_gtgebsrnd.env
    # $Header: APPSORA_ux.env 120.0 2005/06/20 15:33:34 appldev noship $
    # =============================================================================
    # NAME
    #    APPSORA.env
    # DESCRIPTION
    #    Execute environment for Oracle and APPL_TOP
    # NOTES
    # HISTORY
    # =============================================================================
    # This file is automatically generated by AutoConfig.  It will be read and
    # overwritten.  If you were instructed to edit this file, or if you are not
    # able to use the settings created by AutoConfig, refer to Metalink Note
    # 387859.1 for assistance.
    # Source the custom file if it exists
    customfile=/u02/app/oracle/PROD/apps/apps_st/appl/customPROD_gtgebsrnd.env
    if [  -f $customfile ]; then
    . /u02/app/oracle/PROD/apps/apps_st/appl/customPROD_gtgebsrnd.env
    fi
    . /u02/app/oracle/PROD/inst/apps/PROD_gtgebsrnd/ora/10.1.2/PROD_gtgebsrnd.env
    . /u02/app/oracle/PROD/apps/apps_st/appl/PROD_gtgebsrnd.env
    [applmgr@gtgebsrnd home]$
    DB Environmental file is given below...
    [oracle@gtgebsrnd ~]$ cat set_env
    . /u01/oracle/PROD/db/tech_st/11.1.0/PROD_gtgebsrnd.env
    [oracle@gtgebsrnd ~]$ cat /u01/oracle/PROD/db/tech_st/11.1.0/PROD_gtgebsrnd.env
    #!/bin/sh
    # $Header: ad8idbux.env 120.8.12010000.2 2009/08/19 11:49:59 sbandla ship $
    # =============================================================================
    # NAME
    #    PROD.env
    # DESCRIPTION
    #    Setup environment for Oracle
    # NOTES
    # HISTORY
    #    Created by AutoConfig
    # =============================================================================
    # This file is automatically generated by AutoConfig.  It will be read and
    # overwritten.  If you were instructed to edit this file, or if you are not
    # able to use the settings created by AutoConfig, refer to Metalink Note
    # 387859.1 for assistance.
    # Unset all the variables NOT required
    unset TWO_TASK
    unset ORA_NLS33
    unset USERPATH
    # Source the custom file if it exists
    customfile=/u01/oracle/PROD/db/tech_st/11.1.0/customPROD_gtgebsrnd.env
    if [  -f $customfile ]; then
    . /u01/oracle/PROD/db/tech_st/11.1.0/customPROD_gtgebsrnd.env
    fi
    # Set the variables required
    ORACLE_HOME="/u01/oracle/PROD/db/tech_st/11.1.0"
    export ORACLE_HOME
    ORACLE_SID="PROD"
    export ORACLE_SID
    ORA_NLS10="/u01/oracle/PROD/db/tech_st/11.1.0/nls/data/9idata"
    export ORA_NLS10
    PATH="/u01/oracle/PROD/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u01/oracle/PROD/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:$PATH:."
    export PATH
    LINK_CNTRL=""
    export LINK_CNTRL
    TNS_ADMIN="/u01/oracle/PROD/db/tech_st/11.1.0/network/admin/PROD_gtgebsrnd"
    export TNS_ADMIN
    if test "LINUX_X86-64" = "IBM AIX"; then
    export AIXTHREAD_SCOPE=S
    fi
    # The CONTEXT_FILE variable stores the location of the context file.
    CONTEXT_FILE="/u01/oracle/PROD/db/tech_st/11.1.0/appsutil/PROD_gtgebsrnd.xml"
    export CONTEXT_FILE
    # The CONTEXT_NAME variable stores the value for the current context
    CONTEXT_NAME="PROD_gtgebsrnd"
    export CONTEXT_NAME
    # Set Library Path
    LD_LIBRARY_PATH="/u01/oracle/PROD/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/oracle/PROD/db/tech_st/11.1.0/lib:/usr/dt/lib:/u01/oracle/PROD/db/tech_st/11.1.0/ctx/lib"
    export LD_LIBRARY_PATH
    SHLIB_PATH="/u01/oracle/PROD/db/tech_st/11.1.0/lib:/usr/lib:/u01/oracle/PROD/db/tech_st/11.1.0/ctx/lib"
    export SHLIB_PATH
    LIBPATH="/u01/oracle/PROD/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/oracle/PROD/db/tech_st/11.1.0/lib:/usr/dt/lib:/u01/oracle/PROD/db/tech_st/11.1.0/ctx/lib"
    export LIBPATH
    # Add perl to the PATH and set PERL5LIB
    PERLBIN=`dirname /u01/oracle/PROD/db/tech_st/11.1.0/perl/bin/perl`
    PATH=${PERLBIN}:${PATH}
    export PATH
    PERL5LIB=/u01/oracle/PROD/db/tech_st/11.1.0/perl/lib/5.8.3:/u01/oracle/PROD/db/tech_st/11.1.0/perl/lib/site_perl/5.8.3:/u01/oracle/PROD/db/tech_st/11.1.0/appsutil/perl
    export PERL5LIB
    ADPERLPRG=/u01/oracle/PROD/db/tech_st/11.1.0/perl/bin/perl
    export ADPERLPRG
    # National Language Support environment variables
    NLS_LANG="American_America.US7ASCII"
    export NLS_LANG
    NLS_DATE_FORMAT="DD-MON-RR"
    export NLS_DATE_FORMAT
    NLS_NUMERIC_CHARACTERS=".,"
    export NLS_NUMERIC_CHARACTERS
    NLS_SORT="binary"
    export NLS_SORT
    # Set java program used by AD
    ADJVAPRG="/u01/oracle/PROD/db/tech_st/11.1.0/appsutil/jre/bin/java"
    export ADJVAPRG
    ADJREOPTS="-Xms128M -Xmx512M"
    export ADJREOPTS
    # Timezone Specification file
    # For 11gR2, time zone file location should be empty
    if test "db111" = "db112" ; then
    ORA_TZFILE=""
    else
      ORA_TZFILE="$ORACLE_HOME/oracore/zoneinfo/timezlrg.dat"
    fi
    export ORA_TZFILE
    [oracle@gtgebsrnd ~]$
    Guide me Please.......
    Regards,
    Shweta
    [email protected]

    Please see:
    Diagnostics APPS fails with Could not contact Service Manager FNDSM%. (Doc ID 1138128.1)
    Apps Listener Starts But Fails to Spawn The Service Manager FNDSM (Doc ID 1073677.1)
    Concurrent Processing - R12 Output Post Processor Service Not Coming Up. (Doc ID 460578.1)
    Unable to Bring Up Concurrent Managers after Running Autoconfig (Doc ID 736024.1)
    Concurrent Processing - Internal Manager Log File contains messages "Could Not Initialize the Service Manager FNDSM_<HOSTNAME>_<SID>" for Non Concurrent Processing Nodes (Doc ID 754698.1)
    Concurrent Managers Fail to Start, No Service Manager Process Spawned OR Fails with: ORA-01427, ORA-06512 (Doc ID 470100.1)
    Autoconfig on The Apps Tier Server Node B (R12.1.X/RAC) Completed With The Error.ORA-12505, TNS:listener does not currently know of SID given in connect descriptor (Doc ID 1506464.1)
    Concurrent Manager Fails to Start due to Corrupt Index: FND_CONCURRENT_REQUESTS_N1 (Doc ID 1090673.1)
    Thanks,
    Hussein

  • Looking for old Nokia ringtones

    Hi, I'm looking for some old Nokia ringtones (ah, those days). The Nokia ringtones called Airy, Coconut, and Beach are some ringtones I'm currently looking. If any one can help me I'll be greatful.
    Nokia should release their previous ringtones for us, because it's so good. I like the Nokia tune play in harp instrument that can be found in Nokia 1600.

    Hi, Chiyawa. We appreciate your interest in our products. You can try visiting any Nokia store or authorized Nokia retailers for their availability in your area. Check your local support page at http://www.microsoft.com/en/mobile/support/locations/. All the best and welcome to our community. ;-)

Maybe you are looking for