Imovie lost music program will not open

I was making a movie and when I went to add music from the tool bar on the right side i could not open the application under the little note I tried to find the application on the hard drive could not.
I had this computer from 2 year and never had a problem with Imovie. Should I update to ILife 09 is it better than Ilife 08. Also something else is funny I can not access the tutorials on all of the Ilife programs,

I fixed the problem myself. What I did was go into Imovies folder that I had already made a movie and click on one of them and all of the programs came back. The music program and the camera program I don't know what I did to lose the programs. I seem very simple when you know the right place to go. I spent hours looking all around the computer in Finder, spotlight,internet help and when I found the answer it was just one simple click and I was back to normal. I just goes to show if look around long enough the answer is there with a mac. I was in error on the other subject I just didn't click in the right place.

Similar Messages

  • I Just bought iMovie for yosmite and the program will not open.. I will like a fix or a refund..

    I Just bought iMovie for yosmite and the program will not open.. I will like a fix or a refund.. i am getting tired of these problems...

    Welcome to the world of downloaded software. There are no refunds.
    Back in the good old days when software was purchased on disk one could sell it (legally).
    Please describe your problem.  Give us some details to go from.   Are you using iMovie 06, or something newer?

  • Music app will not open on ipad 3 after syncing

    music app will not open on ipad 3 after syncing

    Try a reset. Nothing is lost.
    Reset: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • Adobe bridge cc is not working on my mac snow leopard version 10.6.8. In other words the program will not open all other programs work fine

    Adobe bridge cc is not working on my mac snow leopard version 10.6.8. In other words the program will not open, but all other programs i have been able to open just fine

    Moving this discussion to the Bridge General Discussion forum.

  • I have a Mac running OS 10.5.8. I downloaded Firefox 4 and not the program will not open at all. I am also unable to download the previous version that was running fine. I'm using Safari to contact you.

    I have a Mac G5 running OS 10.5.8. I downloaded Firefox 4 and now the program will not open at all. I get an error message that reads --
    "You cannot open the application 'Firefox" because it is not supported on this architecture."
    I am also unable to find a link to download the previous version (3.6) that was running fine. (I'm using Safari to contact you.)

    Same proble here, although the Firefox system requirements says it is OK to have PowerPC G3 G4 or G5 ( I have G5 2GHZ)
    My solution; very simply use timemachine to restore the previous Frefox 3.x
    worked great in 3 mns

  • My adobe CS2 programs will not open on my macbook pro osx 10.5.8

    Today my adobe cs2 suite programs will not open.  They were working just fine a couple of days ago.  And they have worked fine for years.  I did not update to any new os that would cause them not to work.  I really need to get some image work done soon and this is a real monkey wrench in my plans.  I uninstalled everything and tried to reinstall from the disc and it would not let me do that either.  I tried to download picasa just as a quick alternative to get some images edited tonight and it would not let me open that either, even though it said it was good for 10.5 or above.  So the only thing I can think of is that I downloaded something that changed some settings? 

    Try http://www.lemkesoft.com/ GraphicConverter instead.
    Mackeeper can also be a problem:
    https://discussions.apple.com/docs/DOC-3036

  • I have a 27 inch iMac with maverick os.  my current version of iMovie (10.0.6) will not open older projects i created in iMovie 9.0.9.  I can find the projects and they have a ".rcproject" file extension

    I have a 27 inch iMac with maverick os.  my current version of iMovie (10.0.6) will not open older projects i created in iMovie 9.0.9.  I can find the projects and they have a ".rcproject" file extension

    Thank you GeeD. I'm still stymied.
    I have moved the Event and Project Folders to the "top-layer of the drive" as the instructions state, right alongside the System Folder, Users Folder and Applications Folders.
    When I open iMovie 10.0.8, the Events and Projects Folders are empty:
    When I select File/Update Projects and Events, I get an alert box that says iMovie couldn't find any:
    Not knowing exactly what is meant by the "top layer" in the instructions, I moved the Events and Project folders back inside the "Movies" folder where I found them (but then not where I would call the "top" layer, but rather "iMac/Users/Home/Movies/iMovieProjects". Then I tried to "Update Projects and Events" and received the same alert: "iMovie could not find any projects or events to update."
    Then I tried to update iMovie 9.0 (iMovie '11 version 9.0 (1073)) to version 9.0.9 .
    [As an aside, the nomenclature of iMovie drives me nuts. The latest version is 10.0.8, which us newer than iMovie '11.]
    Back to the update of version 9.0 to 9.0.9.
    Presumably because I have version 10.0.8 installed, I got this alert box:
    So, I cannot update version 9.0
    and I cannot "Update" the Events and Projects created in version 9.0.

  • Programs will not open from Dock

    I have updated my Macbook Pro with Yosemite which has led to - a lot. Programs will not open from Dock, they are just revealed in Finder. Scrolling with mousebuttons in a browser will zoom instead of scroll, the courser will not change after changing tool in Indesign. Just to mention a few problems i have discovered so far. I think I was an idiot to uppgrade to Yosemite. PLEASE HELP!

    Open Disk Utility and Repair Permissions, then quit DU and Restart the MBP.  If that does not clear the issues, restart again holding the Command and R keys, and from Utilities on the menu bar select Install Mac OS X.  That will reinstall Yosemite but leave your content and settings intact.  See if that repairs whatever is broken.

  • Pages is not responding, the icon comes up but the program will not open????

    Pages is not responding, the icon comes up but the program will not open????

    You have to give us some more information or do a search in the forum for answers on the same matter.

  • TS2518 updated to Aperture 3.4, but program will not open, keeps telling me it needs to restore windows?

    I just updated to OS X 10.7.5 and Aperture 3.4, but program will not open, keeps telling me I to restore windows

    Quit Aperture, if it is running/ hanging.
    Remove the file com.apple.Aperture.plist from the folder
    Your home folder  > Library > Preferences
    The User Library is hidden by default. You can reveal it from the Finder's "GO" menu:
    Finder > Go,   then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences" sub folder and remove the file
    your Home Folder/Library/Preferences/com.apple.Aperture.plist.
    After removing the user preferences file, you will have to reset the Preferences, you selected in Aperture's preferences panel.
    Regards
    Léonie

  • Sent long message 4s now message program will not open. Tries to load but returns to the home screen after a while

    Sent long message 4s now message program will not open. Tries to load but returns to the home screen after a while. How can I open my messages?

    close all backgrounded apps, and then try,if it crashes again then do a reset all settings

  • 7515 Program will not open

    I have an HP 7515 All-in-One printer. I have uninstalled and reinstalled the operating programs on my Dell XPS 8700 Win7 Pro several times and it says everything is working the way it should but when I click on the desktop icon, the program will not open. I need to print an address on an envelope so I need to get into this program. Any suggestions?

    Hello DavidBez,
    Welcome to the HP Support Forums!
    I'd like to help get your Photosmart 7515 up and printing from your computer. I am not aware of an area in the printer software that is installed on the computer's Desktop that allows you to print an envelope, but I hope this helps get the icon working again.
    HP Printer Assistant Opens the 'Printer Setup & Software' Window<---
    If the above fails to resolve the issue with the software, run the Print and Scan Dr and let me know its results.
    Cheers,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • IMovie 10.0.5 will not open on new iMac

    iMovie 10.0.5 will not open on my new  iMac - Force quit simply states that iMove is not responding

    Apple offers an inexpensive cross grade or upgrade to Universal Binary versions of FCP for about a year a half. It expired a year ago.
    Apple post this upgrade on its web site for FCP during that time, and then extended deadline twice.
    An upgrade to a Intel version now is $499 to $699 depending on what you have

  • My iphoto program will not open, I get a message "you have previously used a newer version" open with that

    my iphoto program will not open I get a message "you have used a newer program in the past use that program"  I only have the one ???

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • 5800 Express Music - Music player will not open

    Hi,
    My 5800 music player will not open. I can open the radio and every other application in that folder except the music player. please help!!

    Hi,
    Are you able to play the songs from the File Manager in the handset? If yes, try Restore Factory Settings in the handset. Press Menu > Settings > Phone > Phone Management > Factory Settings. If you are not able to play the songs even from from the File Manager, then try Hard Resetting the handset. Power Off the handset. Hold the 2 calls (Red & Green) & the Camera key & proceed to power on the device, while holding the three keys (green, red and camera). Keep holding down the 3 keys until after the handshake screen.
     Make sure you Back-Up the Phone Data before Hard Resetting the device.
    "If this post helped you solve your query, please do click the KUDOS tab."

Maybe you are looking for

  • SRM QUESTIONNAIRE URL

    Hello We are implanting SRM 5.0 and we are having some problems with the part of Survey. Below it follows text with the mistake message that appeared when we tried to access the specified address. Will it be that you could help myself? Thank you very

  • Issues setting up wireless printing

    I have been trying for hours to figure out how to set up my hp printer to print wirelessly. I have the c4780. I can print through a USB cord but that's it. I tried walking through the instructions online but they all start from before you've even ins

  • Where do I have to put R3ta_hints.txt?

    Dear all, I want to split some tables with R3ta and I put the program and the file R3ta_hints.txt to the kernel-directory of my system. The whr.files are created but in the log-files I found the message that R3ta_hints.txt is not available. Where do

  • Hal cd automounting problem

    hi, im having a bit of a problem with hal! it finds flash pens & my sony ericsson phone fine, and puts them on the right hand side of pcmanfm in the location box, but cd's arent! if i open konqueror and goto media:/ my cd is listed there ready to mou

  • MRP - aceess seq determination

    Dear Gurus I would like know that in our billing process, we check for the YPRO (mrp) condition access seq at material - Batch level and if there is no value at material - Batch then billing will take zero value even though there is value available i