IMovie Major Problem - Please Help!

I imported video clips from an analog source though my DV VCR into Final Cut Pro via FireWire but for reasons too technical to go into I now have to edit the project ASAP using iMovie 5.0.2
The problem is that when I import the clips they are stretched into a letterboxed format that distorts the image. Other clips that were brought in with my DV camcorder (which were shot on the camcorder) look fine and fill the screen properly but I can't find any way around the stretching problem with the clips captured from the analog source. This project has to be done by the end of the day OR ELSE! Is there anybody out there who can help me solve this problem?
Thanks in advance!
Accumulator

That one didn't work either. I don't understand why the clips looked fine in Final Cut Pro and look fine in Quicktime but are distorted in iMovie. I know this is an Apple Forum but for crying out loud, is there ANY editing software that I can get that will just play these things correctly while my Quad is in the shop? I even have all of the clips ready for dropping into a timeline (trimmed in QuickTime Pro) and all I need to do is render it into video and audio TS files and I'm good to go. Otherwise I lose a major client! This is crazy because I own Final Cut Studio but my software is back in the States (I'm in London right now)!
Apple makes great products, and I'm a very loyal customer but this particular problem is gonna sink my business!
Any help would be greatly appreciated!
17" G4 PowerBook Mac OS X (10.4)

Similar Messages

IMovie 09 problems PLEASE help!!! so frustrating!!

iMovie was working fine before, until I started a new project and when I tried to playback, it only plays the audio in the viewer... I tried viewing in fullscreen, but it was just a black screen, with audio playback only and to make matters worse, it would not exit fullscreen playback mode. I literally had to unplug my iMac to shut it down, and it DID NOT AUTOSAVE ANYTHING! I also notice most of the menu items are greyed out. I can't add themes, transitions... nothing... I can't even select project properties.. and the project is there, at least the first few clips are there... but the hours of work after is lost. I tried editing AGAIN, and it is not saving any of the new changes I made, even if I shut it down properly. I KNOW how to use iMovie, I've read endless forums, no proposed solutions are working for me.. I am NOT upgrading to '11 PLEASE HELP! This is very frustrating!! - thanks

Hi
Un-plugging the Mac is a dangerous action and nearly always adds small errors on the hard disk - With luck it starts again - if unlucky it doesn't and eventually need repair by pro - to be back in action.
Just to mention it.
If this happens to me I do
• Run Disk Util tool and Repair Permissions
• Start Mac from DVD that came with it and now orient to Disk Util tool on this and - Repair Hard Disk
(This must be done when Mac runs on DVD or external Hard Disk - Can not do Brain Surgery on one self.)
• Then I would re-start from Main Mac OS Hard Disk - usually named Macintosh HD - then trash the pref file/s associated to Application that behaves Badly (usually in the User Account Library / Preferences
Else see my long list of what to do
When in Trouble
When iMovie doesn't work as intended this can be due to a lot of reasons
• iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
• Creating a new User-Account and log into this - forces iMovie to create all pref. files new and error free
• Event or Project got corrupted - try to make a copy and repair
• a codec is used that doesn't work
• problem in iMovie Cache folder - trash Cache.mov and Cache.plist
• version miss match of QuickTime Player / iMovie / iDVD
• preferences are wrong - Repair Preferences
• other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
• External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
• USB-flash-memories do not work
• Net-work connected hard disks - do not work
• iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie.
This You do by
_ close iPhoto
_ on start up of iPhoto - Keep {cmd and alt-keys down}
_ now select all five options presented
_ WAIT a long long time
• free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
• external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
• GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
• Screen must be set to million-colors
• Third-party plug-ins doesn't work OK
• Run "Cache Out X", clear out all caches and restarts the Mac
• Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
• Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
• In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

Iphoto 09 major problems - PLEASE HELP!

Gosh I really hope someone can help me. .
I upgraded iphoto 09 this morning and the result has been utter chaos.
First I have 3 different iphoto libraries for different years. There are albums from 2 years ago now mixed in the middle of 2009 albums (where the websites are listed under Mobile me Gallery on the left hand side).
To make matters worse, every Mobile Me Gallery is malfunctioning. If you click on a gallery, it starts looking like it is updating the album (even though no changes have been made). It then comes up as an error and takes away the link for that gallery. When I tried to click the link to get the pics, the links are all unavailable. I have hundreds of galleries that I have created over the years.
I hope this is a common problem with new users. Please let me know.

Welcome to the Apple Discussions. Did you just upgrade the application and then launch each existing library with the new library?
Backup and launch iPhoto with the Command+Option keys depressed to rebuild each of the libraries. Select the last three options.
Click to view full size
Happy New Year

IMovie Export Problems - PLEASE HELP !!

I have assembled a 3 hour movie in iMovie. I have tried to export approx. 20 times with no success. I have duplicated and renamed the project - deleting the original, this still does not work. I attempted to use Screenflow to record the movie playing in full screen playback - the playback crashes approx 20 mins in. I have tried to play the project within iMovie and record the preview screen (on largest size available) and it crashes approx 30 mins in. I am in despair as I have worked on the content of the movie for approx 2 years.
Tech Info
I have upgraded to Mountain Lion during the creation of the movie.
I have updated iMovie when updates are available.
I have 12GB RAM on board.
Hard Drive (1TB) is has approx 280GB free.
iMac - Oct 2011 - 27"
Really appreciate it if someone could help. Obviously I will not bin the project but am definitely looking for an easier fix than recreating the entire movie as I do not know if this is possible, both technically and mentally with the time that was put in already.
Thanks in advance

If you have Time Machine running, turn it off whenever you are exporting a project (and remember to turn it back on after the export is complete).
Additionally, try splitting the project into two parts (or maybe three or more). Keep the duplicate you created earlier from the original so that you have at least one full copy of your project intact. Now create two (or more) duplicates and rename them appropriately (such as My Project Part 1, My Project Part 2 and so forth).
Delete the second half from the first duplicate (My Project Part 1). Delete the first half from the second duplicate (My Project Part 2). If you created three or more duplicates, then break them up into the relevant segments by deleting appropriate sections.
Now try to export one project at a time. Hopefully, iMovie will be able to handle the shorter projects. If one of the projects fails to export, there may be a corruption in that project file. Splitting that project further may help to isolate the problem.
You may, of course, end up with several exported project files (movies), but at least you will have something for your efforts. If your intention is to burn a DVD, you can include them as separate movies on the DVD, but bear in mind that for a single layer DVD the total running time is limited to 2 hours when using iDVD (including menus). If publishing to the web, you could upload them as separate "episodes" or the like.
TIP: When splitting up the project into shorter sections, you could add an appropriate title to the end and/or beginning of each section before exporting (such as, "End of Part One" and "Part Two" etc.) to avoid an abrupt end or start for each section.
John

Major Problem Please help me.....

Im Using Macbook black operating at Mac OS X (10.5.3), Recently I cant open my Adobe Photoshop so i decided to re-install but i still cant. So what i decided to do is to Clear all the stuffs from my macbook as there we too much things also. I want to be totally empty so i insert the Mac Disc inside and off my mac gives me a blank screen. help me please...

Insert your Leopard install DVD
Hold down the C key and keep it held down
Press the power key to start it up
Continue to hold the C key until the computer is done booting up

645 Ultra and Geforce 4200, major problems, please help!!

I have read through this forum and have seen different problems with this mobo and geforce cards, so first here is my set up.
P4 1.6A
645Ultra Rev 1 Bios 1.9
Visiontek 4200 128mb ddr
IBM Hard Disk 7200 rpm
300W Codegen PS
256 Corsair DDR333
Let me put it like this: With just the video card in, and "installing" winxp on a fresh formatted drive. The card/board crashes the install. I had been using a radeon 7500 on my system for awhile with no problems, but wanted more power, so bought geforce 4. Did the clean uninstall of radeon drivers,bla bla, and install the geforce 4. Nothing but problems, randoms hangs, and eventually would not even let me boot past the bios screen. When I boot in safe mode, it crashes my computer. When I put back in the radeon, no problems.
So I reformatted my whole comp, knowing anyway that it was not xp, so I had to use the radeon to reinstall xp since installer crashes with geforece card.(bye the way I tried my older geforce256 SDR, and same problems). I install fresh system, but do not install radeon drivers, turn off comp, put in geforce card on fresh install, again no drivers, and it still crashes my system...random hangs. So I install the drivers from the install CD, forgot which version, and again still crashes. So can anyone help me. This is clearly a mobo card conflict.
Could it be IRQ settings or Powersupply not enough?
Thanks for any help

I would not say it is a PSU problem as you have the same issues with the other cards.
IRQ could be if you have anything plugged in PCI slot 1 and 2.

Solaris 10 upgrade - Major problems - PLEASE HELP

I have a v880 running Solaris 10 11/06 (U3) which I am trying to upgrade to the latest Solaris 8/11 (U10) release without much success. I am simply using the Solaris Installation Program and booting from DVD and running the upgrade option. However the process fails with the following error:
The selected Software exceeds the available disk space.
The Solaris operating environment selected to upgrade contains
a metadevice. Disk Space Re-allocation is not allowed.
Please do one of the following:
Deselect some software to be installed.
Choose another version of Solaris to upgrade. (If available)
Go back and select Initial Install.
Exit the installation.<Press ENTER to continue>
A df -h shows that / has 22Gb free, swap space is 3.1Gb free, /var has 7.1Gb free and /usr 3.1Gb free. All the documentation seems to show that that is ample space. I'm relatively new to Unix and Solaris so be gentle with me if I'm doing something stupid. Many thanks to all. An initial install is not an option as I need to keep the setup as is.

It's probably /usr that it's whining about. It's not very exact when calculating space and 3.1G is not ample space these days. This is why I put everything in the / partition anymore. Don't have to worry about this crap down the line...
You might try copying some stuff off of /usr (if you can find it) and try again.

IMovie import problem - please help me solve

hi
this is driving me crazy
i have a bunch of MPG clips that i need to import into imovie. i have a new macbook air running lion etc.
surely there is an easy way of grabbing a bunch of the clips and converting them? i have been trying to work this out for weeks and no joy
i have taken advice here before and ended up buying software only to find that lion didnt support it so i wasted a heap of $$
thanks in advance
cheers
verdon

sorted it out - just brought an app of the app store - simple in the end

MAJOR PROBLEMS PLEASE HELP!!

Before I contact AppleCare I want to know what if I'm the only one who is experiencing all these malfunctions first.
I bought my iMac last year right around this time and I've never had problems with it until now.
I decided to leave windows computer about two years ago, I have an iMac and a powerbook g4 now for the very reason why I hated windows, that whole lagging and screen freezing thing.
Never seen it with any macs before until just last week.
My iMac just froze. I didn't know what it was.
I had about 9 safari windows opened and I believed that most of them were in tabs.
It never freezes until I Minimize a window. It just freezes. Can't click on anything even though the cursor is still active, the screen is still active its just not doing anything. So no panic I just need to restart right? Just a day later it did it again. And it keeps doing it. So I dont know whats wrong. Here's an image as to how it looks like.
Another problem I am having is with my external hard drives. I dont think its the hard drives because when I connect it with my powerbook it has no problems but with my iMac, every time I restart my computer it gives me that error about my external drives.
What do I do??

Since it is systemwide, I'd try to repair this with 10.4.10 Combo Updater Intel.
This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before. It has worked well for many.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
EDIT: Is there something odd going on with red, yellow and green areas at the bottom of your display, or is that just a low quality image causing that?
-mj
[email protected]
Message was edited by: macjack

Imac 27 i7 with lg m2762d monitor tv major problem please help

i guys i have just turned to macs and im stuck
i have a imac 27" i7 and its beautiful but i wont to connect a second monitor i have its a lg m2762d
i bought a dr doc mini display port to hdmi cable and the hdmi cable
when i plug it all in it wont give me the option to use 1920 x 1080 resolution so the second monitor looks naff
i know the cable works as i tried a samsung 24 inch monitor and i know the lg monitor works in 1080 as ive tried it on my pc
my question is: is there a compatablity issue or a driver issue and is there a way round it
many thanks

Are you using Extended Desktop or mirroring for the displays? Are you getting a Sys Prefs/Displays window on both displays when you go to Sys Prefs/Displays on the iMac?
Apple suggests that you connect and turn on the ext display before starting up your Mac so that it gets a good read from the ext display's information that it uses to identify itself to the iMac.
Dah•veed

How do i set a default time of 2.0 seconds for all transitions in iMovie 10. Please help.,

how do i set a default time of 2.0 seconds for all transitions in iMovie 10. Please help.,

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
If you do not keep changes after a restart then see:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.org/kb/Preferences+are+not+saved

My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

Problem Please help me.....Let me know the area to look for it I am a DBA..

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION    CPIC (TCP/IP) on local host
ERROR       service 'sapmsPRD' unknown
TIME        Wed May 04 08:59:06 2005
RELEASE     620
COMPONENT   NI (network interface)
VERSION     36
RC          -3
MODULE      ninti.c
LINE        428
DETAIL      NiPServToNo
SYSTEM CALL getservbyname
COUNTER     1
   at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
   at SAP.Connector.SAPConnection.Open()
   at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
   at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
   at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
   at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
   System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
   System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
   SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.search.LoadRegionDetails()
   SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
   System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
   System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
   System.Web.UI.Page.RaiseChangedEvents() +115
   System.Web.UI.Page.ProcessRequestMain() +1099

The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C

Problem Please help me.....Let me know the area to look for it

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099

Hi
You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
sapmsPRD 3600/tcp
Good luck!
René van Es

I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

Hello twrate,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iMovie '11: If iMovie doesn’t recognize your camcorder
http://support.apple.com/kb/PH2146
Best of luck,
Mario

IMovie Major Problem - Please Help!

Similar Messages

Maybe you are looking for