IMovie NOT able to import Sanyo HD1010 files ?

I want to know about what types of files format are supported by iMovie 09
Sanyo HD1010 Camcorder encoding format:
MPEG-4
1920x1080
H.264, AAC
That was shown in Info dialog in Mac OS X.
But iMovie seems not able to import.
I choose File > Import > Movie, and I select all movies I want to import.
Import Setting:
Large - 960x540
Copy files
And it goes to
Converting 1080i Movies
Processing Event: Christmas
||||||||||||||||||||||-------------
Time remaining: less than a minute
And it comes up nothing
It created a event at the bottom. But no movies was shown there.
iMovie not supporting that file format ?
What movie format it support ?
Is there any convertor that I can use ?

In Streamclip, drag your clips into the window. Then select File/Export To QuickTIme.
For Compression, select Apple Intermediate Codec.
For frame size, use the same as the frame size of your camera.
You may want to deinterlace the video, but you can try it interlaced and deinterlaced and see which one you like the best. You can test this with a short clip.
To test, import the AIC into iMovie, and then drag the clip into a project. Share the project in the format or formats you want to use (for example, h.264 for web, iPhone, or iTunes. Use Share to iDVD to make a DVD. Then see which one looks the best.
(In Streamclip, you can easily make a short clip by using I to set the in point and O to set the out point. This is nondestructive to the original clip that you dragged in.)

Similar Messages

  • Lightroom 5.6 crashing, not able to import or back up changes

    I have been having issues with Lightroom 5.6 for few days now. I have been working from this Lightroom install for a year now problem free. The problem seems to happen when I try to import pictures. At first I thought it was my SD card but I copied the pictures to my desktop and was not able to import from the file on my desktop. It will start to download a few out of 400 and stop at 2 or 3 pictures then freeze. A message pops up that says "Lightroom encountered a problem and needs to quit" When i try to open Lightroom again I will get a message that says "The last time Lightroom ran, it shut down prematurely due to a problem reading the catalog. Lightroom must now check the catalog before proceeding." It will proceed to check integrity of the catalog then another message pops up saying it was repaired successfully. When I try to open, same stuff happens all over again.
    I have not moved any files around through the external hard drive and there are no images in the catalog that are "missing." So I'm a little confused as to why Lightroom suddenly keeps crashing.
    I am able to export images from the same catalog, I am able to edit pictures as I normally would,but I am unable to Back up the changes or import new files. I tried working from a different external hard drive and the same thing happens.
    Please help!!

    Are you able to import 450D raw files into LR5.5via USB connection and are you on Windows 7/8?
    I agree with your observations concerning SD vs CF card fragility, but they also have a limited number of insertions before failure.
    http://en.wikipedia.org/wiki/USB#Durability
    The newer Micro-USB receptacles are designed for up to 10,000 cycles of insertion and removal between the receptacle and plug, compared to 1,500 for the standard USB and 5,000 for the Mini-USB receptacle. This is accomplished by adding a locking device and by moving the leaf-spring connector from the jack to the plug, so that the most-stressed part is on the cable side of the connection. This change was made so that the connector on the less expensive cable would bear the most wear instead of the more expensive micro-USB device.
    All my Canon cameras have micro-USB connectors. With one (1) insertion and removal per day that equals 10,000 days, or about 27 years before end-of-life! SD and CF cards are also rated at ~10,000 insertion and removals, but more prone to damage from static electricity and handling due to the exposed contacts and fragility of CF card sockets.
    So there's no real advantage from the camera wear perspective to using a card reader. I'd say use whatever method is easiest for your workflow, but handle memory cards with care and avoid exposing them to static discharge.  Ground yourself to something metal before removing memory cards and inserting them into the card reader, especially in cold Winter months.
    BTW- I helped design one of the first semiconductor DRAM memory systems back in 1970. We killed more memory chips than I care to count before we discovered they were easily damaged by static electricity. Today's ICs have built-in protection, but you can still damage them with a big enough static ZAP!

  • Not able to import protected AAC audio files

    Can i do this? In the past I was able to import these purchased files, and then with an update, I no longer could. When I updated my system to 10.3.9, I was again able to use the music I purchased thru itunes. Now, again I cannot. What happen? Is this something Apple does on purpose, not letting us use music we purchased from them in their programs?

    I am not sure what you mean by putting the G4 to sleep. I put it to sleep and had to wake it up, copied songs to cd, deleted songs from itunes and reimported them. Again, they came back as protected AAC audio files even though I selected AIFF files.
    Reading a tourtorial on imovie it mentions you can get songs from the istore and import them to your movie. So, it is suppose to work.

  • Not Able to import LCMBIAR Files in BOBJ

    Short Text   
    Not Able to import LCMBIAR Files in BOBJ   
    Long Text   
    Not Able to import .biar and .sql Files in BOBJ
    BOBJ Details :-
    Build Date: 2013/04/08:15:08:44
    Build Number: 1036
    Product Version: 14.0.6
    Data Source: BusinessObjects CMS 140
    Database Name: boe140;boe140;microsoft sql server;10.00.5500
    Database User Name: boeuser
    Auditing: Enabled
    Please help us to get resolved .

    Is the biar file created with same version of BO? Or older version?

  • Not able to import .motn files into FCP

    For some reason I'm not able to import .motn files into FCP. While in FCP, I use "send to motion" and uncheck the embed box. After motion opens and I add my motion content, I get the following error when trying to import the .motn file back into FCP "File Error: 1 files(s) recognized, 0 access denied, 1 unknown". What is strange is that I'm able to create another test FCP project with different media, and everything works fine. All tests and media are done on the same drive.
    I'm using the latest updates of everything FCP 5.0.4 and motion 2.0.1
    Any ideas anybody?
    Thanks!
    G5 Mac OS X (10.4.6)

    Check the frame rate - that can sometimes interfere...
    Patrick

  • Canon HF200 and Final Cut Express 4 - not able to import movie files

    Hello,
    I have a Canon HF200. I have a 16 GB Duracell "pro photo" flash card. When I first connected my camera to my computer and clicked on "log and transfer" all of the movie clips on my card showed up in FCE 4. I did not import them at this time, however.
    Now when I connect the camera, only newer videos taken with the camera show up as importable in FCE. Essentially, while the older videos remain on the card, I cannot access them and import them into FCE.
    I am not able to import the files, which are saved as .CPI and .MTS files by simply dragging or using the log and transfer option.
    If anyone can help me with this problem and tell me how I can retrieve the movie files I would really appreciate it.
    Thanks a lot.

    Do you own a card reader? Use that instead of the camera to transfer your files. If not, try using disc utility (or toast if you have it) to duplicate the memory card to a disc image (you can burn it to dvd if you want a back up of the original files) and then use the disc image to log and transfer.

  • Not able to import .mov files in pre elements 8

    Hi,
    Using Pre elements 8 not able to import .mov files ,images stored on external drive (WD)
    whenever we import it shows icon in premiere elements 8 about the clip but whenever we drag and drop it onto the timeline it opens the add media window again and if we cancel it we get message --could not locate the some files.
    Able to import all kind of supported files images,videos in premiere elements 8 stored already in the computer internal hard drive.
    changed the scratch disk, in pre elements 8, to internal c: drive (os).
    All the files from the same camera.
    Please advice, why it is doing like this.
    Vinay

    What type of camcorder did this video from?
    Version 8 is generally not compatible with video from still cameras, and this video must be converted before it can be edited.
    Also, remember that video editors do not actually add your media clips to a project but build connections to them. In other words, once you add a clip to a Premiere Elements project, you MUST maintain a connection to the clip's location. So, if you're connecting to video clips on your external drive, you can not remove your external drive from your computer or this connection will be broken.

  • My hard drive failed. I was able to restore my files from an external hard drive. I have my bookmarks saved but am not able to import them into Firefox as the only option is to import them from another browser. Any suggestions?

    -My hard drive failed.
    -I was able to restore my files from an external hard drive.
    -My bookmarks are saved to a folder on my new hard drive.
    -I am not able to import them from this folder on my hard drive into Firefox.
    - the only option Firefox offers for importing bookmarks is to import them from another browser...is there another way?

    In Firefox the bookmarks are saved in a database file called places.sqlite in the profile folder. If you have got this file from the external hard drive you can restore the bookmarks by copying this file to your current profile folder. For details of the location of the profile folder see either https://support.mozilla.com/kb/Profiles or http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Am not able to import videos to imovies, as am able to view the videos in iphone but not able to import in imovies .Pls help

    Am not able to import videos to imovies, as am able to view the videos in iphone but not able to import in imovies .Pls help

    Hello Ephremekka
    Start your troubleshooting with the article below to get your iPod Classic to show up in iTunes to be restored.
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Regards,
    -Norm G.

  • IMovie 09 has trouble importing large video files from my JVC HD-40. I am trying to edit files such as these in 09. What should I do? Would buying iMovie 2011 help? I am shooting AVCHD files instead of the other mpeg2 file format.

    Hi,
         I am new into the Apple Community. I have a camcorder known as the JVC GZ-HD40 US and I currently am trying to use iMovie 2009 to edit my movies. With my camcorder, I have the choice to use two different video formats: AVCHD or Mpeg2. All my videos are shot in the AVCHD (HD) file format. This camcorder also has a 120 G Hard Drive built into it. When I plug in the camcorder through USB to my MacPro, the Hard Drive of the camcorder shows up as a icon on the desktop. Many of my video clips are at least thirty minutes in length, inside the camcorder. When I try to import in iMovie my video files, it only imports around ten minutes of the video and skips to the end of the clip. I would greatly prefer to use my MacPro desktop to edit movies instead of my Windows 7 computer which seems to work fine. Is there a solution to this problem? Would the new iMovie 2011 application solve this problem? I also have the Final Cut Express to work with, and also, can't get it to work. What should I try doing?

    Hi all,
    I have the exact same problem. I've just been to Thailand with my girlfriend, and we recorded a lot of stuff with my brand new Sony HD camcorder. And whenever the we ran out of camcorder memory we just emptied everything onto my HP laptop using the supplied Sony software, which produced m2ts files. When we got home, I realized that my Mac Pro/iMovie09 was not able to import this format. What a huge disappointment! Especially considering the fact that I just bought my mac back in March (my first mac ever) only for video editing and music composing (no problems with music composing, however!).
    Well, I needed a solution, so last week I just bought the Voltaic HD converting software (35$), and it works great. No problems. Only thing is that my Mac Pro (quad intel core) had to work 24 hours a day for four straight days/nights in order to finish the converting job - resulting in 434 GB worth of mov-files. This is no problem as such, and the quality is great. BUT it seems rather stupid that this converting has to take place. If I use Sony Vegas on my PC, it works out of the box with my original m2ts-files. And I would really appreciate if Apple would implement a simple import function of m2ts-files in their software - one that would (if necessary) automatically convert the files to mov. Or even better: would work natively with the m2ts-files.
    Best,

  • Not able to read the wsdl file from server Premature EOF encounter

    Hi All,
    I am facing issue while accessing a web Service from server. Here is the clear view about it.
    I created a simple SyncBpel process in a composite and deployed in to the server and it is working fine. Later i created a new Asyn bpel process in a composite and in the external reference i dragged a web Service and imported the wsdl url from server of the SyncBpel and wired the Asynbpel process to webserive .
    Now here i am facing peculiar behavior which i am not able to trace it out.
    1) For the first time when i import the url of syncBpel from the server i am not facing any error and it is working fine as expected but when i close the Jdeveloper and open it i am not able to user the web Service and it is saying as "Not able to read the wsdl file from server Premature EOF encounter"
    2)When i close and open the Jdeveloper i can see the url of the wsdl which imported in webserver is changing from http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL to http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/BPELsync.wsdl
    3)when I open and see the url http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL I can see the soap address as *<soap:address location="http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel!1.0*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c/bpelsync_client_ep"/>*
    I don’t understand why the soap end contains “*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c” and this kind of url for soap address is coming to all the bpel process which I am deploying in the server.
    I checked the in Jdeveloper where webproxy is uncheck and the server is also up but still I am facing issue of reading the error.
    Can someone please help in resolving the issue.
    I am using SOA 11g 11.1.1.5 and Jdeveloper 11.1.1.5
    Many thanks.
    Tarak
    Edited by: user11896572 on Jan 17, 2012 5:22 PM

    Hi,
    Setting default from the jdeveloper -
    During composite deployment from Jdeveloper (wizard driven), you will be given an option to choose the version of the composite and there will also be an option for you to choose if the composite needs to be deployed as default.
    Setting default from the em console -
    After deploying a composite, login to the em console and click on the composite that you want to set as default, and you will find a tab - "Set as Default". please note that this tab will not be seen, if the composite is already set as default.
    Refer -
    http://docs.oracle.com/cd/E12839_01/integration.1111/e10226/soacompapp_mang.htm
    8.2 Managing the State of Deployed SOA Composite Applications
    Thanks

  • I wonder how pro photographers use aperture?I shoot raw and my harddrive is alreay full.I'm not able to import new pictures.Is it ok if i create a vault and delete all my projects in the HD.Can I use an external HD use aperture through the vault??

    I wonder how pro photographers use aperture?I shoot raw and my harddrive is alreay full.I'm not able to import new pictures. I don't know what to do. I created a vault. My plan was to create a vault(put all my master files into an external harddrive) and then delete all my projects in my mac pro's harddrive. Is it the correct way to do it ? What should I do if I have thousands of raw files ? How should my workflow be? Can I use an external HD and use aperture through the vault,without keeping the master files on my computer's hard drive?? Or should I shoot raw+jpeg and store raw files in an external backup harddrive and import only jpegs into my aperture library?

    There's a bit to learn.  It will slowly make sense.
    Aperture is an empty field.  You're given a tractor and a whole bunch of attachments. What you grow, how, and where, is entirely up to you.
    Vaults are for back-up and only for back-up.  They have nothing to do with storing your working files.
    When your Library outgrows your system drive (and for good performance, you should leave c. 20% of every drive empty), it's time to convert some of your image's Masters from Managed to Referenced.  ("Managed" and "Referenced" refer to Masters, not to Libraries.)
    There are hundreds of posts in the forum, and several pages in the User Manual on using Masters.
    Many people run Aperture with the Library on their system disk, and most (or all) of their images' Masters on external FW drives.  This is a good set-up.  Note that you will likely have to take steps to back-up the data on your external drives.
    If you do the above, there should be no reason to delete any Projects.
    The choice of RAW or RAW+JPEG or JPEG depends on the kind of work you are doing.  I capture RAW only -- but I don't do any commercial shoots.  Pros on deadlines report that the RAW+JPEG works well for them.  Capture JPEG if it saves you time.  IMHO, there is not a good reason to shoot JPEG to save space (space is cheap; time expensive).
    Short-term solution: buy and use a FW800 external 1 TB drive, formatted "Mac OS Extended (Journaled)", and using Aperture relocate the Masters of all images older than 30 days to that drive.  (Be sure to change your back-up strategy to include this new drive; you may need a second new drive.)
    This general post of mine might help you understand more about Aperture.

  • Not able to import business system in Integration Directory

    Dear all,
    Currently i involved in XI system copy. As per the standard documetn i have finsihed the initial activites like EXPORT and import of abap and java files is succedded.
    Now in the post instalaltion activites.
    I have changed the exchange profile parameter
    SLD connection.
    And other post installation activites succesfully.
    But I am not able to import the business system in Integration director. It throws an error by mentioning.
    *Access to object list of type business system using the internalEOA service business system accessor failed *
    Here we are maintaing a central SLD and hence i created the service users with specific roles.
    SLDcheck is working fine and it dispalying the businees system as well.
    I confirmed that the user and password are same in XI and SLD system,
    But in SLD I am not able to see the domain under web as Exchagne Infrastructure alonng with the componets. I have tried to registerd the same using the note 761476 but in vain. After the changes i restarted the machin and checked the domain status in SLD technical system under exchagne Inffrastructure its not working.
    Is this the problem or am i missing out somewhere?
    FYI: The users are not locked.
    Kindly suggest me and it will be greatful if i get immediate reply.
    Thanks and regards
    Vijay kumar G

    Hi Vijay,
    It looks like the problem is with the SLD.
    Did you delete the SAP ABAP and Java technical system and business systems and recreate them in the central SLD? If this was the case, then you may not be able to import them into your integration directory anymore, as the GUID of the new technical systems and business systems are not the same with the previous one.
    Why not tried to recopy the SLD again, and this time do not change the technical and business systems. If the reregistration of these systems are not avoidable, then you will have to open up the copied IR for configuration.
    Regards,
    Lim...

  • Reg: not able to edit the property file.

    Hi,
    I have imported the track and in one of the DC i am not able to edit the properties file. What could be the reason.
    Thanks in advance.

    Hi
    Since you are in Track.
    Which propertyu file ???
    Best Regards
    Satish Kumar

  • After upgrade to photos not able to import photos from my kodak M883 camera - says not correct format - still jpeg - worked before update - help!

    After upgrade to photos am not able to import photos from my Kodak M883 camera.  Program says not correct format - camera files are still jpeg - had no trouble importing before upgrade - Help!

    Same thing is happening with me.  IPhoto will not import .jpg from my Kodak!  It used to all the time.  Now it gives me an error msg saying .jpg is in the wrong file format.  Can someone help?
    Steve 

Maybe you are looking for